1 files changed, 0 insertions, 115 deletions
diff --git a/c/src/lib/libbsp/i960/cvme961/startup/bspstart.c b/c/src/lib/libbsp/i960/cvme961/startup/bspstart.c
deleted file mode 100644
index 5a5bd86d32..0000000000
--- a/c/src/lib/libbsp/i960/cvme961/startup/bspstart.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  This routine starts the application.  It includes application,
- *  board, and monitor specific initialization and configuration.
- *  The generic CPU dependent initialization has been performed
- *  before this routine is invoked.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <string.h>
-
-#define C961_INIT
-
-#include <bsp.h>
-#include <rtems/libio.h>
-#include <rtems/libcsupport.h>
-
-/*
- *  The original table from the application and our copy of it with
- *  some changes.
- */
-
-extern rtems_configuration_table Configuration;
-
-rtems_configuration_table  BSP_Configuration;
-
-rtems_cpu_table Cpu_table;
-
-char *rtems_progname;
-
-/*
- *  Use the shared implementations of the following routines
- */
-
-void bsp_postdriver_hook(void);
-void bsp_libc_init( void *, uint32_t, int );
-
-/*
- *  Function:   bsp_pretasking_hook
- *  Created:    95/03/10
- *
- *  Description:
- *      BSP pretasking hook.  Called just before drivers are initialized.
- *      Used to setup libc and install any BSP extensions.
- *
- *  NOTES:
- *      Must not use libc (to do io) from here, since drivers are
- *      not yet initialized.
- *
- */
-
-void bsp_pretasking_hook(void)
-{
-    extern int end;
-    uint32_t                heap_start;
-
-    heap_start = (uint32_t) &end;
-    if (heap_start & (CPU_ALIGNMENT-1))
-        heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
-
-    bsp_libc_init((void *) heap_start, 64 * 1024, 0);
-
-#ifdef RTEMS_DEBUG
-    rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
-#endif
-}
-
-/*
- *  bsp_start
- *
- *  This routine does the bulk of the system initialization.
- */
-
-void bsp_start( void )
-{
-  /* set node number in SQSIO4 CTL REG */
-
-  *((uint32_t*)0xc00000b0) =
-       (Configuration.User_multiprocessing_table) ?
-          Configuration.User_multiprocessing_table->node : 0;
-
-  Prcb    = get_prcb();
-  Ctl_tbl = Prcb->control_tbl;
-
-  /* following configures the data breakpoint (which must be set
-   *   before this is executed) to break on writes only.
-   */
-
-  Ctl_tbl->bpcon &= ~0x00cc0000;
-  i960_reload_ctl_group( 6 );
-
-  /*  bit 31 of the Register Cache Control can be set to
-   *  enable an alternative caching algorithm.  It does
-   *  not appear to help RTEMS.
-   */
-
-  /* Configure Number of Register Caches */
-
-  Prcb->reg_cache_cfg = 8;
-  i960_soft_reset( Prcb );
-
-  Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
-  Cpu_table.postdriver_hook = bsp_postdriver_hook;
-  Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;
-
-  BSP_Configuration.work_space_start = (void *)
-     (RAM_END - BSP_Configuration.work_space_size);
-}