diff options
Diffstat (limited to 'c/src/lib/libbsp/i386/ts_386ex/README')
| -rw-r--r-- | c/src/lib/libbsp/i386/ts_386ex/README | 44 |
1 files changed, 0 insertions, 44 deletions
diff --git a/c/src/lib/libbsp/i386/ts_386ex/README b/c/src/lib/libbsp/i386/ts_386ex/README deleted file mode 100644 index bfe757eff2..0000000000 --- a/c/src/lib/libbsp/i386/ts_386ex/README +++ /dev/null @@ -1,44 +0,0 @@ -# -# $Id$ -# - -This BSP is for the Technologic Systems TS-1325, an i386EX PC/AT -compatible SBC equipped with 2 standard serial ports and a parallel -port suitable for general digital I/O. It comes with 2MB RAM and 1MB -Flash ROM. Additional information is available at the TS web site: -http://www.t-systems.com. - -The BSP uses software floating-point emulation, so one must build the -cross-compilation tools with this support. The BSP also supports the -on-board RTC, and an NE2000 compatible network card. It has been used -successfully with C/C++ (egcs-1.1.2) and Ada95 (gnat-3.11p), including -networking applications. - -The TS-1325 runs a version of DOS, and should be configured with a RAM -disk and Zmodem software (see WWW site). RTEMS executables are loaded -and run in DOS conventional memory, giving a 600K file-size limit. The -1MB extended memory is used for the RTEMS workspace, heap, stack and -BSS. Console output is to COM2 @ 115200 baud, 8-N-1. The high baud -rate is needed to speed up serial-line Zmodem file transfers. The -TS-1325 DOS console I/O is by default 9600 baud, and should be changed -to 115200 baud (see WWW site). - -A typical development cycle involves these steps: - -1. Cross-compile the application, yielding an ELF executable. Convert - this to raw binary format, using objcopy or the elf2exe script (see - the tools subdirectory in the BSP). - -2. Use Zmodem to download the raw executable to the TS-1325's ram-disk - (faster than the A: flash disk). A terminal program supporting - Zmodem is needed on the host e.g. minicom under Linux. - -3. Use the DOS-based RTEMS loader "loader.com" (see tools - subdirectory) to load and run the executable on the TS-1325. - -Additional documentation and support software is in the tools subdirectory -of the BSP. - -Happy Coding! - -Tony Ambardar, 8/8/99 |