diff options
Diffstat (limited to 'c/src/lib/libbsp/bfin/bf537Stamp/include/bsp.h')
-rw-r--r-- | c/src/lib/libbsp/bfin/bf537Stamp/include/bsp.h | 122 |
1 files changed, 0 insertions, 122 deletions
diff --git a/c/src/lib/libbsp/bfin/bf537Stamp/include/bsp.h b/c/src/lib/libbsp/bfin/bf537Stamp/include/bsp.h deleted file mode 100644 index 8b14be13f6..0000000000 --- a/c/src/lib/libbsp/bfin/bf537Stamp/include/bsp.h +++ /dev/null @@ -1,122 +0,0 @@ -/* bsp.h - * - * This include file contains all board IO definitions for bf537Stamp. - * - * Copyright (c) 2006 by Atos Automacao Industrial Ltda. - * written by Alain Schaefer <alain.schaefer@easc.ch> - * and Antonio Giovanini <antonio@atos.com.br> - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - - -#ifndef LIBBSP_BFIN_BF537STAMP_BSP_H -#define LIBBSP_BFIN_BF537STAMP_BSP_H - -#ifndef ASM - -#include <bspopts.h> -#include <bsp/default-initial-extension.h> - -#include <rtems.h> - -#include <libcpu/bf537.h> -#include <libcpu/memoryRegs.h> - -#ifdef __cplusplus -extern "C" { -#endif - -/* configure data cache to use 16K of each SRAM bank when enabled */ -#define BSP_DATA_CACHE_CONFIG (3 << DMEM_CONTROL_DMC_SHIFT) - - -/* - * PLL and clock setup values: - */ - -/* - * PLL configuration for bf533Stamp - * - * XTL = 27 MHz - * CLKIN = 13 MHz - * VCO = 391 MHz - * CCLK = 391 MHz - * SCLK = 130 MHz - */ - -#define PLL_CSEL 0x0000 /* CCLK = VCO */ -#define PLL_SSEL 0x0003 /* SCLK = CCLK/3 */ -#define PLL_MSEL 0x3A00 /* VCO = 29xCLKIN */ -#define PLL_DF 0x0001 /* CLKIN = XTL/2 */ - -#define CCLK 500000000 /* CORE CLOCK */ -#define SCLK 100000000 /* SYSTEM CLOCK */ - -#define CONSOLE_FORCE_BAUD 57600 - -/* - * Blackfin environment memory map - */ -#define L1_DATA_SRAM_A 0xff800000L - -#define FIFOLENGTH 0x100 - -/* - * Simple spin delay in microsecond units for device drivers. - * This is very dependent on the clock speed of the target. - */ - -#define rtems_bsp_delay( microseconds ) \ - { \ - } - -/* Constants */ - -#define RAM_START 0 -#define RAM_END 0x4000000 - -/* functions */ - -/* - * Helper Function to use the EzKits LEDS. - * Can be used by the Application. - */ -void setLED(uint8_t value); - -/* - * Helper Function to use the EzKits LEDS - */ -uint8_t getLEDs(void); -void setLEDs(uint8_t value); -uint8_t getButtons(void); - -rtems_isr_entry set_vector( /* returns old vector */ - rtems_isr_entry handler, /* isr routine */ - rtems_vector_number vector, /* vector number */ - int type /* RTEMS or RAW intr */ -); - -/* - * Internal BSP methods that are used across file boundaries - */ -void Init_RTC(void); - -/* - * Network driver configuration - */ -struct rtems_bsdnet_ifconfig; -extern int bf537Stamp_network_driver_attach(struct rtems_bsdnet_ifconfig *, int); - -#define RTEMS_BSP_NETWORK_DRIVER_NAME "eth1" -#define RTEMS_BSP_NETWORK_DRIVER_ATTACH bf537Stamp_network_driver_attach - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif |