diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usb.h')
| -rw-r--r-- | c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usb.h | 463 |
1 files changed, 0 insertions, 463 deletions
diff --git a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usb.h b/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usb.h deleted file mode 100644 index ecef6ca58a..0000000000 --- a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usb.h +++ /dev/null @@ -1,463 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_ll_usb.h - * @author MCD Application Team - * @version V1.0.1 - * @date 25-June-2015 - * @brief Header file of USB Core HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_LL_USB_H -#define __STM32F7xx_LL_USB_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL - * @{ - */ - -/** @addtogroup USB_Core - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief USB Mode definition - */ -typedef enum -{ - USB_OTG_DEVICE_MODE = 0, - USB_OTG_HOST_MODE = 1, - USB_OTG_DRD_MODE = 2 - -}USB_OTG_ModeTypeDef; - -/** - * @brief URB States definition - */ -typedef enum { - URB_IDLE = 0, - URB_DONE, - URB_NOTREADY, - URB_NYET, - URB_ERROR, - URB_STALL - -}USB_OTG_URBStateTypeDef; - -/** - * @brief Host channel States definition - */ -typedef enum { - HC_IDLE = 0, - HC_XFRC, - HC_HALTED, - HC_NAK, - HC_NYET, - HC_STALL, - HC_XACTERR, - HC_BBLERR, - HC_DATATGLERR - -}USB_OTG_HCStateTypeDef; - -/** - * @brief PCD Initialization Structure definition - */ -typedef struct -{ - uint32_t dev_endpoints; /*!< Device Endpoints number. - This parameter depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t Host_channels; /*!< Host Channels number. - This parameter Depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t speed; /*!< USB Core speed. - This parameter can be any value of @ref USB_Core_Speed_ */ - - uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */ - - uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. - This parameter can be any value of @ref USB_EP0_MPS_ */ - - uint32_t phy_itface; /*!< Select the used PHY interface. - This parameter can be any value of @ref USB_Core_PHY_ */ - - uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ - - uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ - - uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ - - uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ - - uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ - - uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ - -}USB_OTG_CfgTypeDef; - -typedef struct -{ - uint8_t num; /*!< Endpoint number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t is_stall; /*!< Endpoint stall condition - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t type; /*!< Endpoint type - This parameter can be any value of @ref USB_EP_Type_ */ - - uint8_t data_pid_start; /*!< Initial data PID - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t even_odd_frame; /*!< IFrame parity - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint16_t tx_fifo_num; /*!< Transmission FIFO number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t maxpacket; /*!< Endpoint Max packet size - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ - - uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ - - uint32_t xfer_len; /*!< Current transfer length */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ - -}USB_OTG_EPTypeDef; - -typedef struct -{ - uint8_t dev_addr ; /*!< USB device address. - This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ - - uint8_t ch_num; /*!< Host channel number. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t ep_num; /*!< Endpoint number. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t ep_is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t speed; /*!< USB Host speed. - This parameter can be any value of @ref USB_Core_Speed_ */ - - uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ - - uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ - - uint8_t ep_type; /*!< Endpoint Type. - This parameter can be any value of @ref USB_EP_Type_ */ - - uint16_t max_packet; /*!< Endpoint Max packet size. - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t data_pid; /*!< Initial data PID. - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ - - uint32_t xfer_len; /*!< Current transfer length. */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ - - uint8_t toggle_in; /*!< IN transfer current toggle flag. - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t toggle_out; /*!< OUT transfer current toggle flag - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ - - uint32_t ErrCnt; /*!< Host channel error count.*/ - - USB_OTG_URBStateTypeDef urb_state; /*!< URB state. - This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ - - USB_OTG_HCStateTypeDef state; /*!< Host Channel state. - This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ - -}USB_OTG_HCTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup PCD_Exported_Constants PCD Exported Constants - * @{ - */ - -/** @defgroup USB_Core_Mode_ USB Core Mode - * @{ - */ -#define USB_OTG_MODE_DEVICE 0 -#define USB_OTG_MODE_HOST 1 -#define USB_OTG_MODE_DRD 2 -/** - * @} - */ - -/** @defgroup USB_Core_Speed_ USB Core Speed - * @{ - */ -#define USB_OTG_SPEED_HIGH 0 -#define USB_OTG_SPEED_HIGH_IN_FULL 1 -#define USB_OTG_SPEED_LOW 2 -#define USB_OTG_SPEED_FULL 3 -/** - * @} - */ - -/** @defgroup USB_Core_PHY_ USB Core PHY - * @{ - */ -#define USB_OTG_ULPI_PHY 1 -#define USB_OTG_EMBEDDED_PHY 2 -/** - * @} - */ - -/** @defgroup USB_Core_MPS_ USB Core MPS - * @{ - */ -#define USB_OTG_HS_MAX_PACKET_SIZE 512 -#define USB_OTG_FS_MAX_PACKET_SIZE 64 -#define USB_OTG_MAX_EP0_SIZE 64 -/** - * @} - */ - -/** @defgroup USB_Core_Phy_Frequency_ USB Core Phy Frequency - * @{ - */ -#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0 << 1) -#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1) -#define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1) -#define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1) -/** - * @} - */ - -/** @defgroup USB_CORE_Frame_Interval_ USB CORE Frame Interval - * @{ - */ -#define DCFG_FRAME_INTERVAL_80 0 -#define DCFG_FRAME_INTERVAL_85 1 -#define DCFG_FRAME_INTERVAL_90 2 -#define DCFG_FRAME_INTERVAL_95 3 -/** - * @} - */ - -/** @defgroup USB_EP0_MPS_ USB EP0 MPS - * @{ - */ -#define DEP0CTL_MPS_64 0 -#define DEP0CTL_MPS_32 1 -#define DEP0CTL_MPS_16 2 -#define DEP0CTL_MPS_8 3 -/** - * @} - */ - -/** @defgroup USB_EP_Speed_ USB EP Speed - * @{ - */ -#define EP_SPEED_LOW 0 -#define EP_SPEED_FULL 1 -#define EP_SPEED_HIGH 2 -/** - * @} - */ - -/** @defgroup USB_EP_Type_ USB EP Type - * @{ - */ -#define EP_TYPE_CTRL 0 -#define EP_TYPE_ISOC 1 -#define EP_TYPE_BULK 2 -#define EP_TYPE_INTR 3 -#define EP_TYPE_MSK 3 -/** - * @} - */ - -/** @defgroup USB_STS_Defines_ USB STS Defines - * @{ - */ -#define STS_GOUT_NAK 1 -#define STS_DATA_UPDT 2 -#define STS_XFER_COMP 3 -#define STS_SETUP_COMP 4 -#define STS_SETUP_UPDT 6 -/** - * @} - */ - -/** @defgroup HCFG_SPEED_Defines_ HCFG SPEED Defines - * @{ - */ -#define HCFG_30_60_MHZ 0 -#define HCFG_48_MHZ 1 -#define HCFG_6_MHZ 2 -/** - * @} - */ - -/** @defgroup HPRT0_PRTSPD_SPEED_Defines_ HPRT0 PRTSPD SPEED Defines - * @{ - */ -#define HPRT0_PRTSPD_HIGH_SPEED 0 -#define HPRT0_PRTSPD_FULL_SPEED 1 -#define HPRT0_PRTSPD_LOW_SPEED 2 -/** - * @} - */ - -#define HCCHAR_CTRL 0 -#define HCCHAR_ISOC 1 -#define HCCHAR_BULK 2 -#define HCCHAR_INTR 3 - -#define HC_PID_DATA0 0 -#define HC_PID_DATA2 1 -#define HC_PID_DATA1 2 -#define HC_PID_SETUP 3 - -#define GRXSTS_PKTSTS_IN 2 -#define GRXSTS_PKTSTS_IN_XFER_COMP 3 -#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5 -#define GRXSTS_PKTSTS_CH_HALTED 7 - -#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE) -#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE) - -#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE)) -#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) -#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) -#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE) - -#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE)) -#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE)) -/** - * @} - */ -/* Exported macro ------------------------------------------------------------*/ -#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) -#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) - -#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) -#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) - -/* Exported functions --------------------------------------------------------*/ -HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); -HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); -HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode); -HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed); -HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num ); -HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma); -HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma); -HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma); -void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); -HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address); -HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup); -uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); -uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); -void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); - -HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); -HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq); -HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state); -uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, - uint8_t ch_num, - uint8_t epnum, - uint8_t dev_address, - uint8_t speed, - uint8_t ep_type, - uint16_t mps); -HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma); -uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num); -HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num); -HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F7xx_LL_USB_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |