diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h')
-rw-r--r-- | c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h | 335 |
1 files changed, 0 insertions, 335 deletions
diff --git a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h b/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h deleted file mode 100644 index 3fb12b5a38..0000000000 --- a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h +++ /dev/null @@ -1,335 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_uart_ex.h - * @author MCD Application Team - * @version V1.0.1 - * @date 25-June-2015 - * @brief Header file of UART HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_UART_EX_H -#define __STM32F7xx_HAL_UART_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup UARTEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants - * @{ - */ - -/** @defgroup UARTEx_Word_Length UARTEx Word Length - * @{ - */ -#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M_1) -#define UART_WORDLENGTH_8B ((uint32_t)0x0000) -#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M_0) -#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ - ((__LENGTH__) == UART_WORDLENGTH_8B) || \ - ((__LENGTH__) == UART_WORDLENGTH_9B)) -#define IS_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B)) -/** - * @} - */ - - -/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length - * @{ - */ -#define UART_ADDRESS_DETECT_4B ((uint32_t)0x00000000) -#define UART_ADDRESS_DETECT_7B ((uint32_t)USART_CR2_ADDM7) -#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ - ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros - * @{ - */ - -/** @brief Reports the UART clock source. - * @param __HANDLE__: specifies the UART Handle - * @param __CLOCKSOURCE__: output variable - * @retval UART clocking source, written in __CLOCKSOURCE__. - */ -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK2: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ - case RCC_USART2CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART2CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART2CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART2CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - switch(__HAL_RCC_GET_USART3_SOURCE()) \ - { \ - case RCC_USART3CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART3CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART3CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART3CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == UART4) \ - { \ - switch(__HAL_RCC_GET_UART4_SOURCE()) \ - { \ - case RCC_UART4CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART4CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART4CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART4CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - break; \ - } \ - } \ - else if ((__HANDLE__)->Instance == UART5) \ - { \ - switch(__HAL_RCC_GET_UART5_SOURCE()) \ - { \ - case RCC_UART5CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART5CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART5CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART5CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART6) \ - { \ - switch(__HAL_RCC_GET_USART6_SOURCE()) \ - { \ - case RCC_USART6CLKSOURCE_PCLK2: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ - break; \ - case RCC_USART6CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART6CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART6CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - break; \ - } \ - } \ - else if ((__HANDLE__)->Instance == UART7) \ - { \ - switch(__HAL_RCC_GET_UART7_SOURCE()) \ - { \ - case RCC_UART7CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART7CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART7CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART7CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - break; \ - } \ - } \ - else if ((__HANDLE__)->Instance == UART8) \ - { \ - switch(__HAL_RCC_GET_UART8_SOURCE()) \ - { \ - case RCC_UART8CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART8CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART8CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART8CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - break; \ - } \ - } \ - } while(0) - -/** @brief Reports the UART mask to apply to retrieve the received data - * according to the word length and to the parity bits activation. - * If PCE = 1, the parity bit is not included in the data extracted - * by the reception API(). - * This masking operation is not carried out in the case of - * DMA transfers. - * @param __HANDLE__: specifies the UART Handle - * @retval mask to apply to UART RDR register value. - */ -#define UART_MASK_COMPUTATION(__HANDLE__) \ - do { \ - if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x01FF ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x00FF ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x00FF ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x007F ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x007F ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x003F ; \ - } \ - } \ -} while(0) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_UART_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |