diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h')
| -rw-r--r-- | c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h | 1165 |
1 files changed, 0 insertions, 1165 deletions
diff --git a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h b/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h deleted file mode 100644 index 06efecc2f7..0000000000 --- a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h +++ /dev/null @@ -1,1165 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_uart.h - * @author MCD Application Team - * @version V1.0.1 - * @date 25-June-2015 - * @brief Header file of UART HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_UART_H -#define __STM32F7xx_HAL_UART_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup UART - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup UART_Exported_Types UART Exported Types - * @{ - */ - -/** - * @brief UART Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the UART communication baud rate. - The baud rate register is computed using the following formula: - - If oversampling is 16 or in LIN mode, - Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))) - - If oversampling is 8, - Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4] - Baud Rate Register[3] = 0 - Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref UARTEx_Word_Length */ - - uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref UART_Stop_Bits */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref UART_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref UART_Mode */ - - uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled - or disabled. - This parameter can be a value of @ref UART_Hardware_Flow_Control */ - - uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8). - This parameter can be a value of @ref UART_Over_Sampling */ - - uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. - Selecting the single sample method increases the receiver tolerance to clock - deviations. This parameter can be a value of @ref UART_OneBit_Sampling */ -}UART_InitTypeDef; - -/** - * @brief UART Advanced Features initalization structure definition - */ -typedef struct -{ - uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several - Advanced Features may be initialized at the same time . - This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */ - - uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. - This parameter can be a value of @ref UART_Tx_Inv */ - - uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. - This parameter can be a value of @ref UART_Rx_Inv */ - - uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic - vs negative/inverted logic). - This parameter can be a value of @ref UART_Data_Inv */ - - uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. - This parameter can be a value of @ref UART_Rx_Tx_Swap */ - - uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. - This parameter can be a value of @ref UART_Overrun_Disable */ - - uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. - This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */ - - uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. - This parameter can be a value of @ref UART_AutoBaudRate_Enable */ - - uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate - detection is carried out. - This parameter can be a value of @ref UART_AutoBaud_Rate_Mode */ - - uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. - This parameter can be a value of @ref UART_MSB_First */ -} UART_AdvFeatureInitTypeDef; - - - -/** - * @brief HAL UART State structures definition - */ -typedef enum -{ - HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */ - HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ - HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ - HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_UART_STATE_ERROR = 0x04 /*!< Error */ -}HAL_UART_StateTypeDef; - -/** - * @brief UART clock sources definition - */ -typedef enum -{ - UART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */ - UART_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */ - UART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */ - UART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */ - UART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */ - UART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */ -}UART_ClockSourceTypeDef; - -/** - * @brief UART handle Structure definition - */ -typedef struct -{ - USART_TypeDef *Instance; /*!< UART registers base address */ - - UART_InitTypeDef Init; /*!< UART communication parameters */ - - UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ - - uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ - - uint16_t TxXferSize; /*!< UART Tx Transfer size */ - - uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ - - uint16_t RxXferSize; /*!< UART Rx Transfer size */ - - uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ - - uint16_t Mask; /*!< UART Rx RDR register mask */ - - DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_UART_StateTypeDef State; /*!< UART communication state */ - - __IO uint32_t ErrorCode; /*!< UART Error code */ - -}UART_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UART_Exported_Constants UART Exported Constants - * @{ - */ -/** @defgroup UART_Error_Definition UART Error Definition - * @{ - */ -#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_UART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */ -#define HAL_UART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */ -#define HAL_UART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */ -#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */ -#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ -/** - * @} - */ -/** @defgroup UART_Stop_Bits UART Number of Stop Bits - * @{ - */ -#define UART_STOPBITS_1 ((uint32_t)0x0000) -#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) -/** - * @} - */ - -/** @defgroup UART_Parity UART Parity - * @{ - */ -#define UART_PARITY_NONE ((uint32_t)0x00000000) -#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) -#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) -/** - * @} - */ - -/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control - * @{ - */ -#define UART_HWCONTROL_NONE ((uint32_t)0x00000000) -#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) -#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) -#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)) -/** - * @} - */ - -/** @defgroup UART_Mode UART Transfer Mode - * @{ - */ -#define UART_MODE_RX ((uint32_t)USART_CR1_RE) -#define UART_MODE_TX ((uint32_t)USART_CR1_TE) -#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) -/** - * @} - */ - - /** @defgroup UART_State UART State - * @{ - */ -#define UART_STATE_DISABLE ((uint32_t)0x00000000) -#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) -/** - * @} - */ - -/** @defgroup UART_Over_Sampling UART Over Sampling - * @{ - */ -#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000) -#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) -/** - * @} - */ - -/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method - * @{ - */ -#define UART_ONE_BIT_SAMPLE_DISABLE ((uint32_t)0x00000000) -#define UART_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) -/** - * @} - */ - -/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode - * @{ - */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000) -#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1) -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE) -/** - * @} - */ - -/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut - * @{ - */ -#define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000) -#define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN) -/** - * @} - */ - -/** @defgroup UART_LIN UART Local Interconnection Network mode - * @{ - */ -#define UART_LIN_DISABLE ((uint32_t)0x00000000) -#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN) -/** - * @} - */ - -/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection - * @{ - */ -#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) -#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) -/** - * @} - */ - -/** @defgroup UART_DMA_Tx UART DMA Tx - * @{ - */ -#define UART_DMA_TX_DISABLE ((uint32_t)0x00000000) -#define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT) -/** - * @} - */ - -/** @defgroup UART_DMA_Rx UART DMA Rx - * @{ - */ -#define UART_DMA_RX_DISABLE ((uint32_t)0x0000) -#define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR) -/** - * @} - */ - -/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection - * @{ - */ -#define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000) -#define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL) -/** - * @} - */ - -/** @defgroup UART_WakeUp_Methods UART WakeUp Methods - * @{ - */ -#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000) -#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE) -/** - * @} - */ - -/** @defgroup UART_Request_Parameters UART Request Parameters - * @{ - */ -#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */ -#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */ -#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */ -#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ -#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ -/** - * @} - */ - -/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type - * @{ - */ -#define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000) -#define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001) -#define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002) -#define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004) -#define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008) -#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010) -#define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020) -#define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040) -#define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080) -/** - * @} - */ - -/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion - * @{ - */ -#define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000) -#define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV) -/** - * @} - */ - -/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion - * @{ - */ -#define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000) -#define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV) -/** - * @} - */ - -/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion - * @{ - */ -#define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000) -#define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV) -/** - * @} - */ - -/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap - * @{ - */ -#define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000) -#define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP) -/** - * @} - */ - -/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable - * @{ - */ -#define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000) -#define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS) -/** - * @} - */ - -/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable - * @{ - */ -#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000) -#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN) -/** - * @} - */ - -/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error - * @{ - */ -#define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000) -#define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE) -/** - * @} - */ - -/** @defgroup UART_MSB_First UART Advanced Feature MSB First - * @{ - */ -#define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000) -#define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST) -/** - * @} - */ - -/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable - * @{ - */ -#define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000) -#define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME) -/** - * @} - */ - -/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register - * @{ - */ -#define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24) -/** - * @} - */ - -/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity - * @{ - */ -#define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000) -#define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP) -/** - * @} - */ - -/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register - * @{ - */ -#define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21) -/** - * @} - */ - -/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register - * @{ - */ -#define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16) -/** - * @} - */ - -/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask - * @{ - */ -#define UART_IT_MASK ((uint32_t)0x001F) -/** - * @} - */ - -/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value - * @{ - */ -#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFF -/** - * @} - */ - -/** @defgroup UART_Flags UART Status Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the ISR register - * @{ - */ -#define UART_FLAG_TEACK ((uint32_t)0x00200000) -#define UART_FLAG_SBKF ((uint32_t)0x00040000) -#define UART_FLAG_CMF ((uint32_t)0x00020000) -#define UART_FLAG_BUSY ((uint32_t)0x00010000) -#define UART_FLAG_ABRF ((uint32_t)0x00008000) -#define UART_FLAG_ABRE ((uint32_t)0x00004000) -#define UART_FLAG_EOBF ((uint32_t)0x00001000) -#define UART_FLAG_RTOF ((uint32_t)0x00000800) -#define UART_FLAG_CTS ((uint32_t)0x00000400) -#define UART_FLAG_CTSIF ((uint32_t)0x00000200) -#define UART_FLAG_LBDF ((uint32_t)0x00000100) -#define UART_FLAG_TXE ((uint32_t)0x00000080) -#define UART_FLAG_TC ((uint32_t)0x00000040) -#define UART_FLAG_RXNE ((uint32_t)0x00000020) -#define UART_FLAG_IDLE ((uint32_t)0x00000010) -#define UART_FLAG_ORE ((uint32_t)0x00000008) -#define UART_FLAG_NE ((uint32_t)0x00000004) -#define UART_FLAG_FE ((uint32_t)0x00000002) -#define UART_FLAG_PE ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup UART_Interrupt_definition UART Interrupts Definition - * Elements values convention: 0000ZZZZ0XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * - ZZZZ : Flag position in the ISR register(4bits) - * @{ - */ -#define UART_IT_PE ((uint32_t)0x0028) -#define UART_IT_TXE ((uint32_t)0x0727) -#define UART_IT_TC ((uint32_t)0x0626) -#define UART_IT_RXNE ((uint32_t)0x0525) -#define UART_IT_IDLE ((uint32_t)0x0424) -#define UART_IT_LBD ((uint32_t)0x0846) -#define UART_IT_CTS ((uint32_t)0x096A) -#define UART_IT_CM ((uint32_t)0x112E) - -/** Elements values convention: 000000000XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - */ -#define UART_IT_ERR ((uint32_t)0x0060) - -/** Elements values convention: 0000ZZZZ00000000b - * - ZZZZ : Flag position in the ISR register(4bits) - */ -#define UART_IT_ORE ((uint32_t)0x0300) -#define UART_IT_NE ((uint32_t)0x0200) -#define UART_IT_FE ((uint32_t)0x0100) -/** - * @} - */ - -/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags - * @{ - */ -#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ -#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ -#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ -#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ -#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ -#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ -#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ -#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ -#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */ -#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */ -#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup UART_Exported_Macros UART Exported Macros - * @{ - */ - -/** @brief Reset UART handle state - * @param __HANDLE__: UART handle. - * @retval None - */ -#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET) - -/** @brief Flush the UART Data registers - * @param __HANDLE__: specifies the UART Handle. - */ -#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ - } while(0) - -/** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag. - * @param __HANDLE__: specifies the UART Handle. - * @param __FLAG__: specifies the interrupt clear register flag that needs to be set - * to clear the corresponding interrupt - * This parameter can be one of the following values: - * @arg UART_CLEAR_PEF: Parity Error Clear Flag - * @arg UART_CLEAR_FEF: Framing Error Clear Flag - * @arg UART_CLEAR_NEF: Noise detected Clear Flag - * @arg UART_CLEAR_OREF: OverRun Error Clear Flag - * @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag - * @arg UART_CLEAR_TCF: Transmission Complete Clear Flag - * @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag - * @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag - * @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag - * @arg UART_CLEAR_EOBF: End Of Block Clear Flag - * @arg UART_CLEAR_CMF: Character Match Clear Flag - * @retval None - */ -#define __HAL_UART_CLEAR_IT(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = ~(__FLAG__)) - -/** @brief Clear the UART PE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_PEF) - -/** @brief Clear the UART FE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_FEF) - -/** @brief Clear the UART NE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_NEF) - -/** @brief Clear the UART ORE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_OREF) - -/** @brief Clear the UART IDLE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_IDLEF) - -/** @brief Checks whether the specified UART flag is set or not. - * @param __HANDLE__: specifies the UART Handle. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg UART_FLAG_REACK: Receive enable acknowledge flag - * @arg UART_FLAG_TEACK: Transmit enable acknowledge flag - * @arg UART_FLAG_WUF: Wake up from stop mode flag - * @arg UART_FLAG_RWU: Receiver wake up flag (is the UART in mute mode) - * @arg UART_FLAG_SBKF: Send Break flag - * @arg UART_FLAG_CMF: Character match flag - * @arg UART_FLAG_BUSY: Busy flag - * @arg UART_FLAG_ABRF: Auto Baud rate detection flag - * @arg UART_FLAG_ABRE: Auto Baud rate detection error flag - * @arg UART_FLAG_EOBF: End of block flag - * @arg UART_FLAG_RTOF: Receiver timeout flag - * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) - * @arg UART_FLAG_LBD: LIN Break detection flag - * @arg UART_FLAG_TXE: Transmit data register empty flag - * @arg UART_FLAG_TC: Transmission Complete flag - * @arg UART_FLAG_RXNE: Receive data register not empty flag - * @arg UART_FLAG_IDLE: Idle Line detection flag - * @arg UART_FLAG_ORE: OverRun Error flag - * @arg UART_FLAG_NE: Noise Error flag - * @arg UART_FLAG_FE: Framing Error flag - * @arg UART_FLAG_PE: Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) - -/** @brief Enables the specified UART interrupt. - * @param __HANDLE__: specifies the UART Handle. - * @param __INTERRUPT__: specifies the UART interrupt source to enable. - * This parameter can be one of the following values: - * @arg UART_IT_WUF: Wakeup from stop mode interrupt - * @arg UART_IT_CM: Character match interrupt - * @arg UART_IT_CTS: CTS change interrupt - * @arg UART_IT_LBD: LIN Break detection interrupt - * @arg UART_IT_TXE: Transmit Data Register empty interrupt - * @arg UART_IT_TC: Transmission complete interrupt - * @arg UART_IT_RXNE: Receive Data register not empty interrupt - * @arg UART_IT_IDLE: Idle line detection interrupt - * @arg UART_IT_PE: Parity Error interrupt - * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK)))) - - -/** @brief Disables the specified UART interrupt. - * @param __HANDLE__: specifies the UART Handle. - * @param __INTERRUPT__: specifies the UART interrupt source to disable. - * This parameter can be one of the following values: - * @arg UART_IT_CM: Character match interrupt - * @arg UART_IT_CTS: CTS change interrupt - * @arg UART_IT_LBD: LIN Break detection interrupt - * @arg UART_IT_TXE: Transmit Data Register empty interrupt - * @arg UART_IT_TC: Transmission complete interrupt - * @arg UART_IT_RXNE: Receive Data register not empty interrupt - * @arg UART_IT_IDLE: Idle line detection interrupt - * @arg UART_IT_PE: Parity Error interrupt - * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK)))) - -/** @brief Checks whether the specified UART interrupt has occurred or not. - * @param __HANDLE__: specifies the UART Handle. - * @param __IT__: specifies the UART interrupt to check. - * This parameter can be one of the following values: - * @arg UART_IT_CM: Character match interrupt - * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg UART_IT_LBD: LIN Break detection interrupt - * @arg UART_IT_TXE: Transmit Data Register empty interrupt - * @arg UART_IT_TC: Transmission complete interrupt - * @arg UART_IT_RXNE: Receive Data register not empty interrupt - * @arg UART_IT_IDLE: Idle line detection interrupt - * @arg UART_IT_ORE: OverRun Error interrupt - * @arg UART_IT_NE: Noise Error interrupt - * @arg UART_IT_FE: Framing Error interrupt - * @arg UART_IT_PE: Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) - -/** @brief Checks whether the specified UART interrupt source is enabled. - * @param __HANDLE__: specifies the UART Handle. - * @param __IT__: specifies the UART interrupt source to check. - * This parameter can be one of the following values: - * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg UART_IT_LBD: LIN Break detection interrupt - * @arg UART_IT_TXE: Transmit Data Register empty interrupt - * @arg UART_IT_TC: Transmission complete interrupt - * @arg UART_IT_RXNE: Receive Data register not empty interrupt - * @arg UART_IT_IDLE: Idle line detection interrupt - * @arg UART_IT_ORE: OverRun Error interrupt - * @arg UART_IT_NE: Noise Error interrupt - * @arg UART_IT_FE: Framing Error interrupt - * @arg UART_IT_PE: Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \ - (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK))) - -/** @brief Set a specific UART request flag. - * @param __HANDLE__: specifies the UART Handle. - * @param __REQ__: specifies the request flag to set - * This parameter can be one of the following values: - * @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request - * @arg UART_SENDBREAK_REQUEST: Send Break Request - * @arg UART_MUTE_MODE_REQUEST: Mute Mode Request - * @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request - * @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request - * @retval None - */ -#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint32_t)(__REQ__)) - -/** @brief Enables the UART one bit sample method - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) - -/** @brief Disables the UART one bit sample method - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) - -/** @brief Enable UART - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable UART - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** @brief Enable CTS flow control - * This macro allows to enable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * The Handle Instance can be USART1, USART2 or LPUART. - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ - } while(0) - -/** @brief Disable CTS flow control - * This macro allows to disable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * The Handle Instance can be USART1, USART2 or LPUART. - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ - do{ \ - CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ - } while(0) - -/** @brief Enable RTS flow control - * This macro allows to enable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * The Handle Instance can be USART1, USART2 or LPUART. - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ - } while(0) - -/** @brief Disable RTS flow control - * This macro allows to disable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * The Handle Instance can be USART1, USART2 or LPUART. - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ - do{ \ - CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ - } while(0) - -/** - * @} - */ - -/* Private macros --------------------------------------------------------*/ -/** @defgroup UART_Private_Macros UART Private Macros - * @{ - */ -/** @brief BRR division operation to set BRR register with LPUART - * @param _PCLK_: LPUART clock - * @param _BAUD_: Baud rate set by the user - * @retval Division result - */ -#define UART_DIV_LPUART(_PCLK_, _BAUD_) (((_PCLK_)*256)/((_BAUD_))) - -/** @brief BRR division operation to set BRR register in 8-bit oversampling mode - * @param _PCLK_: UART clock - * @param _BAUD_: Baud rate set by the user - * @retval Division result - */ -#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*2)/((_BAUD_))) - -/** @brief BRR division operation to set BRR register in 16-bit oversampling mode - * @param _PCLK_: UART clock - * @param _BAUD_: Baud rate set by the user - * @retval Division result - */ -#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_))/((_BAUD_))) - -/** @brief Check UART Baud rate - * @param BAUDRATE: Baudrate specified by the user - * The maximum Baud Rate is derived from the maximum clock on F7 (i.e. 216 MHz) - * divided by the smallest oversampling used on the USART (i.e. 8) - * @retval Test result (TRUE or FALSE). - */ -#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001) - -/** @brief Check UART assertion time - * @param TIME: 5-bit value assertion time - * @retval Test result (TRUE or FALSE). - */ -#define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F) - -/** @brief Check UART deassertion time - * @param TIME: 5-bit value deassertion time - * @retval Test result (TRUE or FALSE). - */ -#define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F) - -#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \ - ((STOPBITS) == UART_STOPBITS_2)) - -#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \ - ((PARITY) == UART_PARITY_EVEN) || \ - ((PARITY) == UART_PARITY_ODD)) - -#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\ - (((CONTROL) == UART_HWCONTROL_NONE) || \ - ((CONTROL) == UART_HWCONTROL_RTS) || \ - ((CONTROL) == UART_HWCONTROL_CTS) || \ - ((CONTROL) == UART_HWCONTROL_RTS_CTS)) - -#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00)) - -#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \ - ((STATE) == UART_STATE_ENABLE)) - -#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \ - ((SAMPLING) == UART_OVERSAMPLING_8)) - -#define IS_UART_ONE_BIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLE) || \ - ((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLE)) - -#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ - ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ - ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ - ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) - -#define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) || \ - ((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE)) - -#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \ - ((LIN) == UART_LIN_ENABLE)) - -#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \ - ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK)) - -#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ - ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) - -#define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) || \ - ((DMATX) == UART_DMA_TX_ENABLE)) - -#define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) || \ - ((DMARX) == UART_DMA_RX_ENABLE)) - -#define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) || \ - ((HDSEL) == UART_HALF_DUPLEX_ENABLE)) - -#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \ - ((PARAM) == UART_SENDBREAK_REQUEST) || \ - ((PARAM) == UART_MUTE_MODE_REQUEST) || \ - ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \ - ((PARAM) == UART_TXDATA_FLUSH_REQUEST)) - -#define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT | \ - UART_ADVFEATURE_TXINVERT_INIT | \ - UART_ADVFEATURE_RXINVERT_INIT | \ - UART_ADVFEATURE_DATAINVERT_INIT | \ - UART_ADVFEATURE_SWAP_INIT | \ - UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ - UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ - UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ - UART_ADVFEATURE_MSBFIRST_INIT)) - -#define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) || \ - ((TXINV) == UART_ADVFEATURE_TXINV_ENABLE)) - -#define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) || \ - ((RXINV) == UART_ADVFEATURE_RXINV_ENABLE)) - -#define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) || \ - ((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE)) - -#define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) || \ - ((SWAP) == UART_ADVFEATURE_SWAP_ENABLE)) - -#define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ - ((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE)) - -#define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ - ((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) - -#define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ - ((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) - -#define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ - ((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE)) - -#define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ - ((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE)) - -#define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) || \ - ((POLARITY) == UART_DE_POLARITY_LOW)) - -/** - * @} - */ -/* Include UART HAL Extension module */ -#include "stm32f7xx_hal_uart_ex.h" -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup UART_Exported_Functions UART Exported Functions - * @{ - */ - -/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); -HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); -HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart); -void HAL_UART_MspInit(UART_HandleTypeDef *huart); -void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group2 IO operation functions - * @{ - */ - -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); -void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); -void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ - -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); -void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions - * @{ - */ - -/* Peripheral State and Errors functions **************************************************/ -HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); -uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions -----------------------------------------------------------*/ -/** @addtogroup UART_Private_Functions UART Private Functions - * @{ - */ - -HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); -HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); -HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout); -void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_UART_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |