diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_smartcard.h')
-rw-r--r-- | c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_smartcard.h | 833 |
1 files changed, 0 insertions, 833 deletions
diff --git a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_smartcard.h b/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_smartcard.h deleted file mode 100644 index 6a27040642..0000000000 --- a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_smartcard.h +++ /dev/null @@ -1,833 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_smartcard.h - * @author MCD Application Team - * @version V1.0.1 - * @date 25-June-2015 - * @brief Header file of SMARTCARD HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_SMARTCARD_H -#define __STM32F7xx_HAL_SMARTCARD_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup SMARTCARD - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types - * @{ - */ - -/** - * @brief SMARTCARD Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate. - The baud rate register is computed using the following formula: - Baud Rate Register = ((PCLKx) / ((hsc->Init.BaudRate))) */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */ - - uint32_t StopBits; /*!< Specifies the number of stop bits @ref SMARTCARD_Stop_Bits. - Only 1.5 stop bits are authorized in SmartCard mode. */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref SMARTCARD_Parity - @note The parity is enabled by default (PCE is forced to 1). - Since the WordLength is forced to 8 bits + parity, M is - forced to 1 and the parity bit is the 9th bit. */ - - uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref SMARTCARD_Mode */ - - uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. - This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ - - uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref SMARTCARD_Clock_Phase */ - - uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted - data bit (MSB) has to be output on the SCLK pin in synchronous mode. - This parameter can be a value of @ref SMARTCARD_Last_Bit */ - - uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. - Selecting the single sample method increases the receiver tolerance to clock - deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling */ - - uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler */ - - uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time */ - - uint32_t NACKState; /*!< Specifies whether the SmartCard NACK transmission is enabled - in case of parity error. - This parameter can be a value of @ref SMARTCARD_NACK_State */ - - uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled. - This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/ - - uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks: - it is used to implement the Character Wait Time (CWT) and - Block Wait Time (BWT). It is coded over 24 bits. */ - - uint32_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode. - This parameter can be any value from 0x0 to 0xFF */ - - uint32_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in - receive and transmit mode). When set to 0, retransmission is - disabled. Otherwise, its maximum value is 7 (before signalling - an error) */ - -}SMARTCARD_InitTypeDef; - -/** - * @brief SMARTCARD advanced features initalization structure definition - */ -typedef struct -{ - uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several - advanced features may be initialized at the same time. This parameter - can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */ - - uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. - This parameter can be a value of @ref SMARTCARD_Tx_Inv */ - - uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. - This parameter can be a value of @ref SMARTCARD_Rx_Inv */ - - uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic - vs negative/inverted logic). - This parameter can be a value of @ref SMARTCARD_Data_Inv */ - - uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. - This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */ - - uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. - This parameter can be a value of @ref SMARTCARD_Overrun_Disable */ - - uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. - This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */ - - uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. - This parameter can be a value of @ref SMARTCARD_MSB_First */ -}SMARTCARD_AdvFeatureInitTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ - HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ - HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ - HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */ -}HAL_SMARTCARD_StateTypeDef; - - -/** - * @brief SMARTCARD clock sources definition - */ -typedef enum -{ - SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */ - SMARTCARD_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */ - SMARTCARD_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */ - SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */ - SMARTCARD_CLOCKSOURCE_LSE = 0x08 /*!< LSE clock source */ -}SMARTCARD_ClockSourceTypeDef; - -/** - * @brief SMARTCARD handle Structure definition - */ -typedef struct -{ - USART_TypeDef *Instance; /* USART registers base address */ - - SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */ - - SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /* SmartCard advanced features initialization parameters */ - - uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */ - - uint16_t TxXferSize; /* SmartCard Tx Transfer size */ - - uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */ - - uint16_t RxXferSize; /* SmartCard Rx Transfer size */ - - uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */ - - DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /* Locking object */ - - __IO HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */ - - __IO uint32_t ErrorCode; /* SmartCard Error code */ - -}SMARTCARD_HandleTypeDef; - -/** - * @} - */ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants - * @{ - */ -/** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code - * @brief SMARTCARD Error Code - * @{ - */ -#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00) /*!< No error */ -#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x01) /*!< Parity error */ -#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x02) /*!< Noise error */ -#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x04) /*!< frame error */ -#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x08) /*!< Overrun error */ -#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x10) /*!< DMA transfer error */ -#define HAL_SMARTCARD_ERROR_RTO ((uint32_t)0x20) /*!< Receiver TimeOut error */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length - * @{ - */ -#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M_0) -/** - * @} - */ - -/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits - * @{ - */ -#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP)) -/** - * @} - */ - -/** @defgroup SMARTCARD_Parity SMARTCARD Parity - * @{ - */ -#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) -#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) -/** - * @} - */ - -/** @defgroup SMARTCARD_Mode SMARTCARD Mode - * @{ - */ -#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) -#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) -#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) -/** - * @} - */ - -/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity - * @{ - */ -#define SMARTCARD_POLARITY_LOW ((uint32_t)0x0000) -#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) -/** - * @} - */ - -/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase - * @{ - */ -#define SMARTCARD_PHASE_1EDGE ((uint32_t)0x0000) -#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) -/** - * @} - */ - -/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit - * @{ - */ -#define SMARTCARD_LASTBIT_DISABLE ((uint32_t)0x0000) -#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) -/** - * @} - */ - -/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD OneBit Sampling - * @{ - */ -#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE ((uint32_t)0x0000) -#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) -/** - * @} - */ - - -/** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State - * @{ - */ -#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) -#define SMARTCARD_NACK_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable - * @{ - */ -#define SMARTCARD_TIMEOUT_DISABLE ((uint32_t)0x00000000) -#define SMARTCARD_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN) -/** - * @} - */ - -/** @defgroup SMARTCARD_DMA_Requests SMARTCARD DMA requests - * @{ - */ - -#define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT) -#define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR) - -/** - * @} - */ - -/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD Advanced Features Initialization Type - * @{ - */ -#define SMARTCARD_ADVFEATURE_NO_INIT ((uint32_t)0x00000000) -#define SMARTCARD_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001) -#define SMARTCARD_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002) -#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004) -#define SMARTCARD_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008) -#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010) -#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020) -#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080) -/** - * @} - */ - -/** @defgroup SMARTCARD_Tx_Inv SMARTCARD Tx Inv - * @{ - */ -#define SMARTCARD_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000) -#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV) -/** - * @} - */ - -/** @defgroup SMARTCARD_Rx_Inv SMARTCARD Rx Inv - * @{ - */ -#define SMARTCARD_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000) -#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV) -/** - * @} - */ - -/** @defgroup SMARTCARD_Data_Inv SMARTCARD Data Inv - * @{ - */ -#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000) -#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV) -/** - * @} - */ - -/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD Rx Tx Swap - * @{ - */ -#define SMARTCARD_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000) -#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP) -/** - * @} - */ - -/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD Overrun Disable - * @{ - */ -#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000) -#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS) -/** - * @} - */ - -/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD DMA Disable on Rx Error - * @{ - */ -#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000) -#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE) -/** - * @} - */ - -/** @defgroup SMARTCARD_MSB_First SMARTCARD MSB First - * @{ - */ -#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000) -#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST) -/** - * @} - */ - -/** @defgroup SmartCard_Flags SMARTCARD Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the ISR register - * @{ - */ -#define SMARTCARD_FLAG_REACK ((uint32_t)0x00400000) -#define SMARTCARD_FLAG_TEACK ((uint32_t)0x00200000) -#define SMARTCARD_FLAG_BUSY ((uint32_t)0x00010000) -#define SMARTCARD_FLAG_EOBF ((uint32_t)0x00001000) -#define SMARTCARD_FLAG_RTOF ((uint32_t)0x00000800) -#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080) -#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040) -#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020) -#define SMARTCARD_FLAG_IDLE ((uint32_t)0x00000010) -#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008) -#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004) -#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002) -#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupt definition - * Elements values convention: 0000ZZZZ0XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * - ZZZZ : Flag position in the ISR register(4bits) - * @{ - */ - -#define SMARTCARD_IT_PE ((uint16_t)0x0028) -#define SMARTCARD_IT_TXE ((uint16_t)0x0727) -#define SMARTCARD_IT_TC ((uint16_t)0x0626) -#define SMARTCARD_IT_RXNE ((uint16_t)0x0525) -#define SMARTCARD_IT_IDLE ((uint16_t)0x0424) -#define SMARTCARD_IT_ERR ((uint16_t)0x0060) -#define SMARTCARD_IT_ORE ((uint16_t)0x0300) -#define SMARTCARD_IT_NE ((uint16_t)0x0200) -#define SMARTCARD_IT_FE ((uint16_t)0x0100) - -#define SMARTCARD_IT_EOB ((uint16_t)0x0C3B) -#define SMARTCARD_IT_RTO ((uint16_t)0x0B3A) -/** - * @} - */ - - -/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD IT CLEAR Flags - * @{ - */ -#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ -#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ -#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ -#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ -#define SMARTCARD_CLEAR_IDLEF USART_ICR_IDLECF /*!< Idle line detected clear Flag */ -#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ -#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */ -#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters - * @{ - */ -#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ -#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ -/** - * @} - */ - - -/** @defgroup SMARTCARD_CR3_SCAR_CNT_LSB_POS SMARTCARD CR3 SCAR CNT LSB POS - * @{ - */ -#define SMARTCARD_CR3_SCARCNT_LSB_POS ((uint32_t) 17) -/** - * @} - */ - -/** @defgroup SMARTCARD_GTPR_GT_LSBPOS SMARTCARD GTPR GT LSBPOS - * @{ - */ -#define SMARTCARD_GTPR_GT_LSB_POS ((uint32_t) 8) -/** - * @} - */ - -/** @defgroup SMARTCARD_RTOR_BLEN_LSBPOS SMARTCARD RTOR BLEN LSBPOS - * @{ - */ -#define SMARTCARD_RTOR_BLEN_LSB_POS ((uint32_t) 24) -/** - * @} - */ - -/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD Interruption Mask - * @{ - */ -#define SMARTCARD_IT_MASK ((uint16_t)0x001F) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros - * @{ - */ - -/** @brief Reset SMARTCARD handle state - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2 - * @retval None - */ -#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET) - -/** @brief Flush the Smartcard DR register - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2. - * @retval None - */ -#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) (__HAL_SMARTCARD_SEND_REQ((__HANDLE__), SMARTCARD_RXDATA_FLUSH_REQUEST)) - -/** @brief Checks whether the specified Smartcard flag is set or not. - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SMARTCARD_FLAG_REACK: Receive enable acknowledge flag - * @arg SMARTCARD_FLAG_TEACK: Transmit enable acknowledge flag - * @arg SMARTCARD_FLAG_BUSY: Busy flag - * @arg SMARTCARD_FLAG_EOBF: End of block flag - * @arg SMARTCARD_FLAG_RTOF: Receiver timeout flag - * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag - * @arg SMARTCARD_FLAG_TC: Transmission Complete flag - * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag - * @arg SMARTCARD_FLAG_ORE: OverRun Error flag - * @arg SMARTCARD_FLAG_NE: Noise Error flag - * @arg SMARTCARD_FLAG_FE: Framing Error flag - * @arg SMARTCARD_FLAG_PE: Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) - -/** @brief Enables the specified SmartCard interrupt. - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable. - * This parameter can be one of the following values: - * @arg SMARTCARD_IT_EOBF: End Of Block interrupt - * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt - * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt - * @arg SMARTCARD_IT_TC: Transmission complete interrupt - * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt - * @arg SMARTCARD_IT_PE: Parity Error interrupt - * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 |= (1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 |= (1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 |= (1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) -/** @brief Disables the specified SmartCard interrupt. - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable. - * This parameter can be one of the following values: - * @arg SMARTCARD_IT_EOBF: End Of Block interrupt - * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt - * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt - * @arg SMARTCARD_IT_TC: Transmission complete interrupt - * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt - * @arg SMARTCARD_IT_PE: Parity Error interrupt - * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) - -/** @brief Checks whether the specified SmartCard interrupt has occurred or not. - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __IT__: specifies the SMARTCARD interrupt to check. - * This parameter can be one of the following values: - * @arg SMARTCARD_IT_EOBF: End Of Block interrupt - * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt - * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt - * @arg SMARTCARD_IT_TC: Transmission complete interrupt - * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt - * @arg SMARTCARD_IT_ORE: OverRun Error interrupt - * @arg SMARTCARD_IT_NE: Noise Error interrupt - * @arg SMARTCARD_IT_FE: Framing Error interrupt - * @arg SMARTCARD_IT_PE: Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) - -/** @brief Checks whether the specified SmartCard interrupt interrupt source is enabled. - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __IT__: specifies the SMARTCARD interrupt source to check. - * This parameter can be one of the following values: - * @arg SMARTCARD_IT_EOBF: End Of Block interrupt - * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt - * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt - * @arg SMARTCARD_IT_TC: Transmission complete interrupt - * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt - * @arg SMARTCARD_IT_ORE: OverRun Error interrupt - * @arg SMARTCARD_IT_NE: Noise Error interrupt - * @arg SMARTCARD_IT_FE: Framing Error interrupt - * @arg SMARTCARD_IT_PE: Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \ - (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << \ - (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK))) - - -/** @brief Clears the specified SMARTCARD ISR flag, in setting the proper ICR register flag. - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set - * to clear the corresponding interrupt - * This parameter can be one of the following values: - * @arg USART_CLEAR_PEF: Parity Error Clear Flag - * @arg USART_CLEAR_FEF: Framing Error Clear Flag - * @arg USART_CLEAR_NEF: Noise detected Clear Flag - * @arg USART_CLEAR_OREF: OverRun Error Clear Flag - * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag - * @arg USART_CLEAR_RTOF: Receiver Time Out Clear Flag - * @arg USART_CLEAR_EOBF: End Of Block Clear Flag - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) - -/** @brief Set a specific SMARTCARD request flag. - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __REQ__: specifies the request flag to set - * This parameter can be one of the following values: - * @arg SMARTCARD_RXDATA_FLUSH_REQUEST: Receive Data flush Request - * @arg SMARTCARD_TXDATA_FLUSH_REQUEST: Transmit data flush Request - * - * @retval None - */ -#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint32_t)(__REQ__)) - -/** @brief Enable the USART associated to the SMARTCARD Handle - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2. - * @retval None - */ -#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable the USART associated to the SMARTCARD Handle - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2. - * @retval None - */ -#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** @brief Macros to enable or disable the SmartCard DMA request. - * @param __HANDLE__: specifies the SMARTCARD Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __REQUEST__: specifies the SmartCard DMA request. - * This parameter can be one of the following values: - * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request - * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request - */ -#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__)) -#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__)) -/** - * @} - */ - -/* Include SMARTCARD HAL Extension module */ -#include "stm32f7xx_hal_smartcard_ex.h" -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SMARTCARD_Exported_Functions - * @{ - */ - -/** @addtogroup SMARTCARD_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc); -HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc); -/** - * @} - */ - -/** @addtogroup SMARTCARD_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc); -/** - * @} - */ - -/** @addtogroup SMARTCARD_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions **************************************************/ -HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc); -uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants - * @{ - */ - -#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B) -#define IS_SMARTCARD_STOPBITS(__STOPBITS__) ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5) -#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \ - ((__PARITY__) == SMARTCARD_PARITY_ODD)) -#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & (uint32_t)0xFFF3) == 0x00) && ((__MODE__) != (uint32_t)0x00)) -#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW) || ((__CPOL__) == SMARTCARD_POLARITY_HIGH)) -#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE)) -#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \ - ((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE)) -#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \ - ((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE)) -#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \ - ((__NACK__) == SMARTCARD_NACK_DISABLE)) -#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \ - ((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE)) -#define IS_SMARTCARD_ADVFEATURE_INIT(INIT) ((INIT) <= (SMARTCARD_ADVFEATURE_NO_INIT | \ - SMARTCARD_ADVFEATURE_TXINVERT_INIT | \ - SMARTCARD_ADVFEATURE_RXINVERT_INIT | \ - SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \ - SMARTCARD_ADVFEATURE_SWAP_INIT | \ - SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ - SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \ - SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) -#define IS_SMARTCARD_ADVFEATURE_TXINV(TXINV) (((TXINV) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \ - ((TXINV) == SMARTCARD_ADVFEATURE_TXINV_ENABLE)) -#define IS_SMARTCARD_ADVFEATURE_RXINV(RXINV) (((RXINV) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \ - ((RXINV) == SMARTCARD_ADVFEATURE_RXINV_ENABLE)) -#define IS_SMARTCARD_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \ - ((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE)) -#define IS_SMARTCARD_ADVFEATURE_SWAP(SWAP) (((SWAP) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \ - ((SWAP) == SMARTCARD_ADVFEATURE_SWAP_ENABLE)) -#define IS_SMARTCARD_OVERRUN(OVERRUN) (((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \ - ((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE)) -#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \ - ((DMA) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR)) -#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001) -#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFF) -#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFF) -#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7) -#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \ - ((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE)) -#define IS_SMARTCARD_REQUEST_PARAMETER(PARAM) (((PARAM) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \ - ((PARAM) == SMARTCARD_TXDATA_FLUSH_REQUEST)) - - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_SMARTCARD_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |