diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rtc_ex.h')
-rw-r--r-- | c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rtc_ex.h | 1035 |
1 files changed, 0 insertions, 1035 deletions
diff --git a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rtc_ex.h b/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rtc_ex.h deleted file mode 100644 index c5da404be9..0000000000 --- a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rtc_ex.h +++ /dev/null @@ -1,1035 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_rtc_ex.h - * @author MCD Application Team - * @version V1.0.1 - * @date 25-June-2015 - * @brief Header file of RTC HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_RTC_EX_H -#define __STM32F7xx_HAL_RTC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup RTCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RTCEx_Exported_Types RTCEx Exported Types - * @{ - */ - -/** - * @brief RTC Tamper structure definition - */ -typedef struct -{ - uint32_t Tamper; /*!< Specifies the Tamper Pin. - This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ - - uint32_t Interrupt; /*!< Specifies the Tamper Interrupt. - This parameter can be a value of @ref RTCEx_Tamper_Interrupt_Definitions */ - - uint32_t Trigger; /*!< Specifies the Tamper Trigger. - This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ - - uint32_t NoErase; /*!< Specifies the Tamper no erase mode. - This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp_Definitions */ - - uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking. - This parameter can be a value of @ref RTCEx_Tamper_MaskFlag_Definitions */ - - uint32_t Filter; /*!< Specifies the RTC Filter Tamper. - This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ - - uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. - This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ - - uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . - This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ - - uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . - This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */ - - uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. - This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ -}RTC_TamperTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants - * @{ - */ - -/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output selection Definitions - * @{ - */ -#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000) -#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000) -#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000) -#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000) -/** - * @} - */ - -/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions - * @{ - */ -#define RTC_BKP_DR0 ((uint32_t)0x00000000) -#define RTC_BKP_DR1 ((uint32_t)0x00000001) -#define RTC_BKP_DR2 ((uint32_t)0x00000002) -#define RTC_BKP_DR3 ((uint32_t)0x00000003) -#define RTC_BKP_DR4 ((uint32_t)0x00000004) -#define RTC_BKP_DR5 ((uint32_t)0x00000005) -#define RTC_BKP_DR6 ((uint32_t)0x00000006) -#define RTC_BKP_DR7 ((uint32_t)0x00000007) -#define RTC_BKP_DR8 ((uint32_t)0x00000008) -#define RTC_BKP_DR9 ((uint32_t)0x00000009) -#define RTC_BKP_DR10 ((uint32_t)0x0000000A) -#define RTC_BKP_DR11 ((uint32_t)0x0000000B) -#define RTC_BKP_DR12 ((uint32_t)0x0000000C) -#define RTC_BKP_DR13 ((uint32_t)0x0000000D) -#define RTC_BKP_DR14 ((uint32_t)0x0000000E) -#define RTC_BKP_DR15 ((uint32_t)0x0000000F) -#define RTC_BKP_DR16 ((uint32_t)0x00000010) -#define RTC_BKP_DR17 ((uint32_t)0x00000011) -#define RTC_BKP_DR18 ((uint32_t)0x00000012) -#define RTC_BKP_DR19 ((uint32_t)0x00000013) -#define RTC_BKP_DR20 ((uint32_t)0x00000014) -#define RTC_BKP_DR21 ((uint32_t)0x00000015) -#define RTC_BKP_DR22 ((uint32_t)0x00000016) -#define RTC_BKP_DR23 ((uint32_t)0x00000017) -#define RTC_BKP_DR24 ((uint32_t)0x00000018) -#define RTC_BKP_DR25 ((uint32_t)0x00000019) -#define RTC_BKP_DR26 ((uint32_t)0x0000001A) -#define RTC_BKP_DR27 ((uint32_t)0x0000001B) -#define RTC_BKP_DR28 ((uint32_t)0x0000001C) -#define RTC_BKP_DR29 ((uint32_t)0x0000001D) -#define RTC_BKP_DR30 ((uint32_t)0x0000001E) -#define RTC_BKP_DR31 ((uint32_t)0x0000001F) -/** - * @} - */ - -/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definitions - * @{ - */ -#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000) -#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definitions - * @{ - */ -#define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E -#define RTC_TAMPER_2 RTC_TAMPCR_TAMP2E -#define RTC_TAMPER_3 RTC_TAMPCR_TAMP3E -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Interrupt_Definitions RTCEx Tamper Interrupt Definitions - * @{ - */ -#define RTC_TAMPER1_INTERRUPT RTC_TAMPCR_TAMP1IE -#define RTC_TAMPER2_INTERRUPT RTC_TAMPCR_TAMP2IE -#define RTC_TAMPER3_INTERRUPT RTC_TAMPCR_TAMP3IE -#define RTC_ALL_TAMPER_INTERRUPT RTC_TAMPCR_TAMPIE -/** - * @} - */ - -/** @defgroup RTCEx_TimeStamp_Pin_Selection RTCEx TimeStamp Pin Selection - * @{ - */ -#define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000) -#define RTC_TIMESTAMPPIN_POS1 ((uint32_t)0x00000002) -#define RTC_TIMESTAMPPIN_POS2 ((uint32_t)0x00000004) -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definitions - * @{ - */ -#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000) -#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002) -#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE -#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE -/** - * @} - */ - - /** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTCEx Tamper EraseBackUp Definitions -* @{ -*/ -#define RTC_TAMPER_ERASE_BACKUP_ENABLE ((uint32_t)0x00000000) -#define RTC_TAMPER_ERASE_BACKUP_DISABLE ((uint32_t)0x00020000) -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTCEx Tamper MaskFlag Definitions - * @{ - */ -#define RTC_TAMPERMASK_FLAG_DISABLE ((uint32_t)0x00000000) -#define RTC_TAMPERMASK_FLAG_ENABLE ((uint32_t)0x00040000) -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions - * @{ - */ -#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */ - -#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2 - consecutive samples at the active level */ -#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4 - consecutive samples at the active level */ -#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8 - consecutive samples at the active leve. */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions - * @{ - */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 32768 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 16384 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 8192 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 4096 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 2048 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 1024 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 512 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 256 */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions - * @{ - */ -#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before - sampling during 1 RTCCLK cycle */ -#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before - sampling during 2 RTCCLK cycles */ -#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before - sampling during 4 RTCCLK cycles */ -#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before - sampling during 8 RTCCLK cycles */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definitions - * @{ - */ -#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAMPCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */ -#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definitions - * @{ - */ -#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */ -#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAMPCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */ -/** - * @} - */ - -/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions - * @{ - */ -#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000) -#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001) -#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002) -#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003) -#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004) -#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006) -/** - * @} - */ - -/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions - * @{ - */ -#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibration - period is 32s, else 2exp20 RTCCLK seconds */ -#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibration - period is 16s, else 2exp19 RTCCLK seconds */ -#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibration - period is 8s, else 2exp18 RTCCLK seconds */ -/** - * @} - */ - -/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions - * @{ - */ -#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added - during a X -second window = Y - CALM[8:0] - with Y = 512, 256, 128 when X = 32, 16, 8 */ -#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited - during a 32-second window = CALM[8:0] */ -/** - * @} - */ - -/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTCEx Add 1 Second Parameter Definitions - * @{ - */ -#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000) -#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000) -/** - * @} - */ - - /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions - * @{ - */ -#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000) -#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros - * @{ - */ - -/** - * @brief Enable the RTC WakeUp Timer peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) - -/** - * @brief Disable the RTC WakeUp Timer peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) - -/** - * @brief Enable the RTC WakeUpTimer interrupt. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_WUT: WakeUpTimer interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the RTC WakeUpTimer interrupt. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_WUT: WakeUpTimer interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to check. - * This parameter can be: - * @arg RTC_IT_WUT: WakeUpTimer interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET) - -/** - * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check. - * This parameter can be: - * @arg RTC_IT_WUT: WakeUpTimer interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) - -/** - * @brief Get the selected RTC WakeUpTimer's flag status. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC WakeUpTimer Flag is pending or not. - * This parameter can be: - * @arg RTC_FLAG_WUTF - * @arg RTC_FLAG_WUTWF - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) - -/** - * @brief Clear the RTC Wake Up timer's pending flags. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC WakeUpTimer Flag to clear. - * This parameter can be: - * @arg RTC_FLAG_WUTF - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - -/** - * @brief Enable the RTC Tamper1 input detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E)) - -/** - * @brief Disable the RTC Tamper1 input detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E)) - -/** - * @brief Enable the RTC Tamper2 input detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP2E)) - -/** - * @brief Disable the RTC Tamper2 input detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E)) - -/** - * @brief Enable the RTC Tamper3 input detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E)) - -/** - * @brief Disable the RTC Tamper3 input detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E)) - -/** - * @brief Check whether the specified RTC Tamper interrupt has occurred or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check. - * This parameter can be: - * @arg RTC_IT_TAMP: All tampers interrupts - * @arg RTC_IT_TAMP1: Tamper1 interrupt - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @arg RTC_IT_TAMP3: Tamper3 interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3)) != RESET) ? SET : RESET) : \ - ((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5)) != RESET) ? SET : RESET) : \ - (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7)) != RESET) ? SET : RESET)) - -/** - * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check. - * This parameter can be: - * @arg RTC_IT_TAMP: All tampers interrupts - * @arg RTC_IT_TAMP1: Tamper1 interrupt - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @arg RTC_IT_TAMP3: Tamper3 interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET) - -/** - * @brief Get the selected RTC Tamper's flag status. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC Tamper Flag is pending or not. - * This parameter can be: - * @arg RTC_FLAG_TAMP1F: Tamper1 flag - * @arg RTC_FLAG_TAMP2F: Tamper2 flag - * @arg RTC_FLAG_TAMP3F: Tamper3 flag - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) - -/** - * @brief Clear the RTC Tamper's pending flags. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC Tamper Flag sources to clear. - * This parameter can be: - * @arg RTC_FLAG_TAMP1F: Tamper1 flag - * @arg RTC_FLAG_TAMP2F: Tamper2 flag - * @arg RTC_FLAG_TAMP3F: Tamper3 flag - * @retval None - */ -#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - -/** - * @brief Enable the RTC TimeStamp peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) - -/** - * @brief Disable the RTC TimeStamp peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) - -/** - * @brief Enable the RTC TimeStamp interrupt. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the RTC TimeStamp interrupt. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to check. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET) - -/** - * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) - -/** - * @brief Get the selected RTC TimeStamp's flag status. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC TimeStamp Flag is pending or not. - * This parameter can be: - * @arg RTC_FLAG_TSF - * @arg RTC_FLAG_TSOVF - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) - -/** - * @brief Clear the RTC Time Stamp's pending flags. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC Alarm Flag sources to clear. - * This parameter can be: - * @arg RTC_FLAG_TSF - * @arg RTC_FLAG_TSOVF - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - -/** - * @brief Enable the RTC internal TimeStamp peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE)) - -/** - * @brief Disable the RTC internal TimeStamp peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE)) - -/** - * @brief Get the selected RTC Internal Time Stamp's flag status. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC Internal Time Stamp Flag is pending or not. - * This parameter can be: - * @arg RTC_FLAG_ITSF - * @retval None - */ -#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) - -/** - * @brief Clear the RTC Internal Time Stamp's pending flags. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC Internal Time Stamp Flag source to clear. - * This parameter can be: - * @arg RTC_FLAG_ITSF - * @retval None - */ -#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0003FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - -/** - * @brief Enable the RTC calibration output. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) - -/** - * @brief Disable the calibration output. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) - -/** - * @brief Enable the clock reference detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) - -/** - * @brief Disable the clock reference detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) - -/** - * @brief Get the selected RTC shift operation's flag status. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC shift operation Flag is pending or not. - * This parameter can be: - * @arg RTC_FLAG_SHPF - * @retval None - */ -#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) - -/** - * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) - -/** - * @brief Enable event on the RTC WakeUp Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable event on the RTC WakeUp Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) - -/** - * @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) - -/** - * @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) - -/** - * @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); - -/** - * @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. - * This parameter can be: - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); - -/** - * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not. - * @retval Line Status. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Clear the RTC WakeUp Timer associated Exti line flag. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line. - * @retval None - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line. - * @retval None - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) - -/** - * @brief Enable event on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable event on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) - -/** - * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) - -/** - * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) - -/** - * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); - -/** - * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. - * This parameter can be: - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); - -/** - * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not. - * @retval Line Status. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Clear the RTC Tamper and Timestamp associated Exti line flag. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions - * @{ - */ - -/** @addtogroup RTCEx_Exported_Functions_Group1 - * @{ - */ - -/* RTC TimeStamp and Tamper functions *****************************************/ -HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); -HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); -HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); - -HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); -HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); -HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); -void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); - -void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); -void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); -void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); -void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -/** - * @} - */ - -/** @addtogroup RTCEx_Exported_Functions_Group2 - * @{ - */ -/* RTC Wake-up functions ******************************************************/ -HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); -HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); -uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); -uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); -void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); -void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -/** - * @} - */ - -/** @addtogroup RTCEx_Exported_Functions_Group3 - * @{ - */ -/* Extension Control functions ************************************************/ -void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); -uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); - -HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue); -HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); -HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); -HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); -/** - * @} - */ - -/** @addtogroup RTCEx_Exported_Functions_Group4 - * @{ - */ -/* Extension RTC features functions *******************************************/ -void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RTCEx_Private_Constants RTCEx Private Constants - * @{ - */ -#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */ -#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */ -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RTCEx_Private_Constants RTCEx Private Constants - * @{ - */ -/* Masks Definition */ -#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP3E | RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E)) -#define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER1_INTERRUPT | RTC_TAMPER2_INTERRUPT | RTC_TAMPER3_INTERRUPT)) -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RTCEx_Private_Macros RTCEx Private Macros - * @{ - */ - -/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters - * @{ - */ -#define IS_RTC_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_OUTPUT_DISABLE) || \ - ((__OUTPUT__) == RTC_OUTPUT_ALARMA) || \ - ((__OUTPUT__) == RTC_OUTPUT_ALARMB) || \ - ((__OUTPUT__) == RTC_OUTPUT_WAKEUP)) -#define IS_RTC_BKP(__BKP__) ((__BKP__) < (uint32_t) RTC_BKP_NUMBER) -#define IS_TIMESTAMP_EDGE(__EDGE__) (((__EDGE__) == RTC_TIMESTAMPEDGE_RISING) || \ - ((__EDGE__) == RTC_TIMESTAMPEDGE_FALLING)) -#define IS_RTC_TAMPER(__TAMPER__) ((((__TAMPER__) & ((uint32_t)(0xFFFFFFFF ^ RTC_TAMPCR_TAMPXE))) == 0x00) && ((__TAMPER__) != (uint32_t)RESET)) - -#define IS_RTC_TAMPER_INTERRUPT(__INTERRUPT__) ((((__INTERRUPT__) & (uint32_t)(0xFFFFFFFF ^ RTC_TAMPCR_TAMPXIE)) == 0x00) && ((__INTERRUPT__) != (uint32_t)RESET)) - -#define IS_RTC_TIMESTAMP_PIN(__PIN__) (((__PIN__) == RTC_TIMESTAMPPIN_DEFAULT) || \ - ((__PIN__) == RTC_TIMESTAMPPIN_POS1) || \ - ((__PIN__) == RTC_TIMESTAMPPIN_POS2)) -#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ - ((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ - ((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ - ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL)) -#define IS_RTC_TAMPER_ERASE_MODE(__MODE__) (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \ - ((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE)) -#define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__) (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE) || \ - ((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE)) -#define IS_RTC_TAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \ - ((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \ - ((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \ - ((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE)) -#define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ - ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ - ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ - ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ - ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ - ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ - ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ - ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) -#define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION__) (((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ - ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ - ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ - ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) -#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(__DETECTION__) (((__DETECTION__) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ - ((__DETECTION__) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) -#define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \ - ((__STATE__) == RTC_TAMPER_PULLUP_DISABLE)) -#define IS_RTC_WAKEUP_CLOCK(__CLOCK__) (((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ - ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ - ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ - ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ - ((__CLOCK__) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ - ((__CLOCK__) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) - -#define IS_RTC_WAKEUP_COUNTER(__COUNTER__) ((__COUNTER__) <= 0xFFFF) -#define IS_RTC_SMOOTH_CALIB_PERIOD(__PERIOD__) (((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ - ((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ - ((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_8SEC)) -#define IS_RTC_SMOOTH_CALIB_PLUS(__PLUS__) (((__PLUS__) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ - ((__PLUS__) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) -#define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x000001FF) -#define IS_RTC_SHIFT_ADD1S(__SEL__) (((__SEL__) == RTC_SHIFTADD1S_RESET) || \ - ((__SEL__) == RTC_SHIFTADD1S_SET)) -#define IS_RTC_SHIFT_SUBFS(__FS__) ((__FS__) <= 0x00007FFF) -#define IS_RTC_CALIB_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_CALIBOUTPUT_512HZ) || \ - ((__OUTPUT__) == RTC_CALIBOUTPUT_1HZ)) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_RTC_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |