diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h')
-rw-r--r-- | c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h | 280 |
1 files changed, 0 insertions, 280 deletions
diff --git a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h b/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h deleted file mode 100644 index 3f4ab57779..0000000000 --- a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h +++ /dev/null @@ -1,280 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_pwr_ex.h - * @author MCD Application Team - * @version V1.0.1 - * @date 25-June-2015 - * @brief Header file of PWR HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_PWR_EX_H -#define __STM32F7xx_HAL_PWR_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWREx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Constants PWREx Exported Constants - * @{ - */ -/** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins - * @{ - */ -#define PWR_WAKEUP_PIN1 PWR_CSR2_EWUP1 -#define PWR_WAKEUP_PIN2 PWR_CSR2_EWUP2 -#define PWR_WAKEUP_PIN3 PWR_CSR2_EWUP3 -#define PWR_WAKEUP_PIN4 PWR_CSR2_EWUP4 -#define PWR_WAKEUP_PIN5 PWR_CSR2_EWUP5 -#define PWR_WAKEUP_PIN6 PWR_CSR2_EWUP6 -#define PWR_WAKEUP_PIN1_HIGH PWR_CSR2_EWUP1 -#define PWR_WAKEUP_PIN2_HIGH PWR_CSR2_EWUP2 -#define PWR_WAKEUP_PIN3_HIGH PWR_CSR2_EWUP3 -#define PWR_WAKEUP_PIN4_HIGH PWR_CSR2_EWUP4 -#define PWR_WAKEUP_PIN5_HIGH PWR_CSR2_EWUP5 -#define PWR_WAKEUP_PIN6_HIGH PWR_CSR2_EWUP6 -#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1) -#define PWR_WAKEUP_PIN2_LOW (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2) -#define PWR_WAKEUP_PIN3_LOW (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3) -#define PWR_WAKEUP_PIN4_LOW (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4) -#define PWR_WAKEUP_PIN5_LOW (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5) -#define PWR_WAKEUP_PIN6_LOW (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6) - -/** - * @} - */ - -/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode - * @{ - */ -#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR1_MRUDS -#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS)) -/** - * @} - */ - -/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag - * @{ - */ -#define PWR_FLAG_ODRDY PWR_CSR1_ODRDY -#define PWR_FLAG_ODSWRDY PWR_CSR1_ODSWRDY -#define PWR_FLAG_UDRDY PWR_CSR1_UDSWRDY -/** - * @} - */ - -/** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags - * @{ - */ -#define PWR_WAKEUP_PIN_FLAG1 PWR_CSR2_WUPF1 -#define PWR_WAKEUP_PIN_FLAG2 PWR_CSR2_WUPF2 -#define PWR_WAKEUP_PIN_FLAG3 PWR_CSR2_WUPF3 -#define PWR_WAKEUP_PIN_FLAG4 PWR_CSR2_WUPF4 -#define PWR_WAKEUP_PIN_FLAG5 PWR_CSR2_WUPF5 -#define PWR_WAKEUP_PIN_FLAG6 PWR_CSR2_WUPF6 -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Macro PWREx Exported Macro - * @{ - */ -/** @brief Macros to enable or disable the Over drive mode. - */ -#define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN) -#define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN)) - -/** @brief Macros to enable or disable the Over drive switching. - */ -#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN) -#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN)) - -/** @brief Macros to enable or disable the Under drive mode. - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main regulator or the low power regulator - * is in low voltage mode. - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - */ -#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN) -#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN)) - -/** @brief Check PWR flag is set or not. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode - * is ready - * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode - * switching is ready - * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode - * is enabled in Stop mode - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the Under-Drive Ready flag. - */ -#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= PWR_FLAG_UDRDY) - -/** @brief Check Wake Up flag is set or not. - * @param __WUFLAG__: specifies the Wake Up flag to check. - * This parameter can be one of the following values: - * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0 - * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2 - * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1 - * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13 - * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8 - * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11 - */ -#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__)) - -/** @brief Clear the WakeUp pins flags. - * @param __WUFLAG__: specifies the Wake Up pin flag to clear. - * This parameter can be one of the following values: - * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0 - * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2 - * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1 - * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13 - * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8 - * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11 - */ -#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |= (__WUFLAG__)) -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions - * @{ - */ - -/** @addtogroup PWREx_Exported_Functions_Group1 - * @{ - */ -uint32_t HAL_PWREx_GetVoltageRange(void); -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); - -void HAL_PWREx_EnableFlashPowerDown(void); -void HAL_PWREx_DisableFlashPowerDown(void); -HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); -HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); - -void HAL_PWREx_EnableMainRegulatorLowVoltage(void); -void HAL_PWREx_DisableMainRegulatorLowVoltage(void); -void HAL_PWREx_EnableLowRegulatorLowVoltage(void); -void HAL_PWREx_DisableLowRegulatorLowVoltage(void); - -HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PWREx_Private_Macros PWREx Private Macros - * @{ - */ - -/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters - * @{ - */ -#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON)) -#define IS_PWR_WAKEUP_PIN(__PIN__) (((__PIN__) == PWR_WAKEUP_PIN1) || \ - ((__PIN__) == PWR_WAKEUP_PIN2) || \ - ((__PIN__) == PWR_WAKEUP_PIN3) || \ - ((__PIN__) == PWR_WAKEUP_PIN4) || \ - ((__PIN__) == PWR_WAKEUP_PIN5) || \ - ((__PIN__) == PWR_WAKEUP_PIN6) || \ - ((__PIN__) == PWR_WAKEUP_PIN1_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN2_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN3_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN4_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN5_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN6_HIGH) || \ - ((__PIN__) == PWR_WAKEUP_PIN1_LOW) || \ - ((__PIN__) == PWR_WAKEUP_PIN2_LOW) || \ - ((__PIN__) == PWR_WAKEUP_PIN3_LOW) || \ - ((__PIN__) == PWR_WAKEUP_PIN4_LOW) || \ - ((__PIN__) == PWR_WAKEUP_PIN5_LOW) || \ - ((__PIN__) == PWR_WAKEUP_PIN6_LOW)) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F7xx_HAL_PWR_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |