diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_irda.h')
| -rw-r--r-- | c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_irda.h | 643 |
1 files changed, 0 insertions, 643 deletions
diff --git a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_irda.h b/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_irda.h deleted file mode 100644 index 935d170dac..0000000000 --- a/c/src/lib/libbsp/arm/stm32f7x/hal/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_irda.h +++ /dev/null @@ -1,643 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_irda.h - * @author MCD Application Team - * @version V1.0.1 - * @date 25-June-2015 - * @brief Header file of IRDA HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_IRDA_H -#define __STM32F7xx_HAL_IRDA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup IRDA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup IRDA_Exported_Types IRDA Exported Types - * @{ - */ -/** - * @brief IRDA Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. - The baud rate register is computed using the following formula: - Baud Rate Register = ((PCLKx) / ((hirda->Init.BaudRate))) */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref IRDAEx_Word_Length */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref IRDA_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref IRDA_Transfer_Mode */ - - uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock - to achieve low-power frequency. - @note Prescaler value 0 is forbidden */ - - uint16_t PowerMode; /*!< Specifies the IRDA power mode. - This parameter can be a value of @ref IRDA_Low_Power */ -}IRDA_InitTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ - HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_IRDA_STATE_BUSY = 0x02, /*!< An internal process is ongoing */ - HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ - HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */ -}HAL_IRDA_StateTypeDef; - -/** - * @brief IRDA clock sources definition - */ -typedef enum -{ - IRDA_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */ - IRDA_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */ - IRDA_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */ - IRDA_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */ - IRDA_CLOCKSOURCE_LSE = 0x08 /*!< LSE clock source */ -}IRDA_ClockSourceTypeDef; - -/** - * @brief IRDA handle Structure definition - */ -typedef struct -{ - USART_TypeDef *Instance; /* IRDA registers base address */ - - IRDA_InitTypeDef Init; /* IRDA communication parameters */ - - uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */ - - uint16_t TxXferSize; /* IRDA Tx Transfer size */ - - uint16_t TxXferCount; /* IRDA Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */ - - uint16_t RxXferSize; /* IRDA Rx Transfer size */ - - uint16_t RxXferCount; /* IRDA Rx Transfer Counter */ - - uint16_t Mask; /* IRDA RX RDR register mask */ - - DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /* Locking object */ - - __IO HAL_IRDA_StateTypeDef State; /* IRDA communication state */ - - __IO uint32_t ErrorCode; /* IRDA Error code */ - -}IRDA_HandleTypeDef; - -/** - * @} - */ - -/** - * @brief IRDA Configuration enumeration values definition - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup IRDA_Exported_Constants IRDA Exported constants - * @{ - */ -/** @defgroup IRDA_Error_Code IRDA Error Code - * @brief IRDA Error Code - * @{ - */ - -#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */ -#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */ -#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */ -#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */ -#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ -/** - * @} - */ - -/** @defgroup IRDA_Parity IRDA Parity - * @{ - */ -#define IRDA_PARITY_NONE ((uint32_t)0x0000) -#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE) -#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) -/** - * @} - */ - - -/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode - * @{ - */ -#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE) -#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE) -#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) -/** - * @} - */ - -/** @defgroup IRDA_Low_Power IRDA Low Power - * @{ - */ -#define IRDA_POWERMODE_NORMAL ((uint32_t)0x0000) -#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP) -/** - * @} - */ - - /** @defgroup IRDA_State IRDA State - * @{ - */ -#define IRDA_STATE_DISABLE ((uint32_t)0x0000) -#define IRDA_STATE_ENABLE ((uint32_t)USART_CR1_UE) -/** - * @} - */ - - /** @defgroup IRDA_Mode IRDA Mode - * @{ - */ -#define IRDA_MODE_DISABLE ((uint32_t)0x0000) -#define IRDA_MODE_ENABLE ((uint32_t)USART_CR3_IREN) -/** - * @} - */ - -/** @defgroup IRDA_One_Bit IRDA One Bit - * @{ - */ -#define IRDA_ONE_BIT_SAMPLE_DISABLE ((uint32_t)0x00000000) -#define IRDA_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) -/** - * @} - */ - -/** @defgroup IRDA_DMA_Tx IRDA DMA Tx - * @{ - */ -#define IRDA_DMA_TX_DISABLE ((uint32_t)0x00000000) -#define IRDA_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT) -/** - * @} - */ - -/** @defgroup IRDA_DMA_Rx IRDA DMA Rx - * @{ - */ -#define IRDA_DMA_RX_DISABLE ((uint32_t)0x0000) -#define IRDA_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR) -/** - * @} - */ - -/** @defgroup IRDA_Flags IRDA Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the ISR register - * @{ - */ -#define IRDA_FLAG_REACK ((uint32_t)0x00400000) -#define IRDA_FLAG_TEACK ((uint32_t)0x00200000) -#define IRDA_FLAG_BUSY ((uint32_t)0x00010000) -#define IRDA_FLAG_ABRF ((uint32_t)0x00008000) -#define IRDA_FLAG_ABRE ((uint32_t)0x00004000) -#define IRDA_FLAG_TXE ((uint32_t)0x00000080) -#define IRDA_FLAG_TC ((uint32_t)0x00000040) -#define IRDA_FLAG_RXNE ((uint32_t)0x00000020) -#define IRDA_FLAG_ORE ((uint32_t)0x00000008) -#define IRDA_FLAG_NE ((uint32_t)0x00000004) -#define IRDA_FLAG_FE ((uint32_t)0x00000002) -#define IRDA_FLAG_PE ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup IRDA_Interrupt_definition IRDA Interrupt definition - * Elements values convention: 0000ZZZZ0XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * - ZZZZ : Flag position in the ISR register(4bits) - * @{ - */ -#define IRDA_IT_PE ((uint16_t)0x0028) -#define IRDA_IT_TXE ((uint16_t)0x0727) -#define IRDA_IT_TC ((uint16_t)0x0626) -#define IRDA_IT_RXNE ((uint16_t)0x0525) -#define IRDA_IT_IDLE ((uint16_t)0x0424) - - - -/** Elements values convention: 000000000XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - */ -#define IRDA_IT_ERR ((uint16_t)0x0060) - -/** Elements values convention: 0000ZZZZ00000000b - * - ZZZZ : Flag position in the ISR register(4bits) - */ -#define IRDA_IT_ORE ((uint16_t)0x0300) -#define IRDA_IT_NE ((uint16_t)0x0200) -#define IRDA_IT_FE ((uint16_t)0x0100) -/** - * @} - */ - -/** @defgroup IRDA_IT_CLEAR_Flags IRDA IT CLEAR Flags - * @{ - */ -#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ -#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ -#define IRDA_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ -#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ -#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ -/** - * @} - */ - - - -/** @defgroup IRDA_Request_Parameters IRDA Request Parameters - * @{ - */ -#define IRDA_AUTOBAUD_REQUEST ((uint16_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */ -#define IRDA_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ -#define IRDA_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ -/** - * @} - */ - -/** - * @} - */ - - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup IRDA_Exported_Macros IRDA Exported Macros - * @{ - */ - -/** @brief Reset IRDA handle state - * @param __HANDLE__: specifies the IRDA Handle. - * The Handle Instance which can be USART1 or USART2. - * @retval None - */ -#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET) - -/** @brief Check whether the specified IRDA flag is set or not. - * @param __HANDLE__: specifies the IRDA Handle. - * The Handle Instance which can be USART1 or USART2. - * UART peripheral - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg IRDA_FLAG_REACK: Receive enable acknowledge flag - * @arg IRDA_FLAG_TEACK: Transmit enable acknowledge flag - * @arg IRDA_FLAG_BUSY: Busy flag - * @arg IRDA_FLAG_ABRF: Auto Baud rate detection flag - * @arg IRDA_FLAG_ABRE: Auto Baud rate detection error flag - * @arg IRDA_FLAG_TXE: Transmit data register empty flag - * @arg IRDA_FLAG_TC: Transmission Complete flag - * @arg IRDA_FLAG_RXNE: Receive data register not empty flag - * @arg IRDA_FLAG_IDLE: Idle Line detection flag - * @arg IRDA_FLAG_ORE: OverRun Error flag - * @arg IRDA_FLAG_NE: Noise Error flag - * @arg IRDA_FLAG_FE: Framing Error flag - * @arg IRDA_FLAG_PE: Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) - -/** @brief Enable the specified IRDA interrupt. - * @param __HANDLE__: specifies the IRDA Handle. - * The Handle Instance which can be USART1 or USART2. - * UART peripheral - * @param __INTERRUPT__: specifies the IRDA interrupt source to enable. - * This parameter can be one of the following values: - * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt - * @arg IRDA_IT_TC: Transmission complete interrupt - * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt - * @arg IRDA_IT_IDLE: Idle line detection interrupt - * @arg IRDA_IT_PE: Parity Error interrupt - * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 |= (1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 |= (1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 |= (1 << ((__INTERRUPT__) & IRDA_IT_MASK)))) - -/** @brief Disable the specified IRDA interrupt. - * @param __HANDLE__: specifies the IRDA Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __INTERRUPT__: specifies the IRDA interrupt source to disable. - * This parameter can be one of the following values: - * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt - * @arg IRDA_IT_TC: Transmission complete interrupt - * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt - * @arg IRDA_IT_IDLE: Idle line detection interrupt - * @arg IRDA_IT_PE: Parity Error interrupt - * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & IRDA_IT_MASK)))) - -/** @brief Check whether the specified IRDA interrupt has occurred or not. - * @param __HANDLE__: specifies the IRDA Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __IT__: specifies the IRDA interrupt source to check. - * This parameter can be one of the following values: - * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt - * @arg IRDA_IT_TC: Transmission complete interrupt - * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt - * @arg IRDA_IT_IDLE: Idle line detection interrupt - * @arg IRDA_IT_ORE: OverRun Error interrupt - * @arg IRDA_IT_NE: Noise Error interrupt - * @arg IRDA_IT_FE: Framing Error interrupt - * @arg IRDA_IT_PE: Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) - -/** @brief Check whether the specified IRDA interrupt source is enabled. - * @param __HANDLE__: specifies the IRDA Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __IT__: specifies the IRDA interrupt source to check. - * This parameter can be one of the following values: - * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt - * @arg IRDA_IT_TC: Transmission complete interrupt - * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt - * @arg IRDA_IT_IDLE: Idle line detection interrupt - * @arg IRDA_IT_ORE: OverRun Error interrupt - * @arg IRDA_IT_NE: Noise Error interrupt - * @arg IRDA_IT_FE: Framing Error interrupt - * @arg IRDA_IT_PE: Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \ - (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & IRDA_IT_MASK))) - -/** @brief Clear the specified IRDA ISR flag, in setting the proper ICR register flag. - * @param __HANDLE__: specifies the IRDA Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set - * to clear the corresponding interrupt - * This parameter can be one of the following values: - * @arg IRDA_CLEAR_PEF: Parity Error Clear Flag - * @arg IRDA_CLEAR_FEF: Framing Error Clear Flag - * @arg IRDA_CLEAR_NEF: Noise detected Clear Flag - * @arg IRDA_CLEAR_OREF: OverRun Error Clear Flag - * @arg IRDA_CLEAR_TCF: Transmission Complete Clear Flag - * @retval None - */ -#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__)) - -/** @brief Set a specific IRDA request flag. - * @param __HANDLE__: specifies the IRDA Handle. - * The Handle Instance which can be USART1 or USART2. - * @param __REQ__: specifies the request flag to set - * This parameter can be one of the following values: - * @arg IRDA_AUTOBAUD_REQUEST: Auto-Baud Rate Request - * @arg IRDA_RXDATA_FLUSH_REQUEST: Receive Data flush Request - * @arg IRDA_TXDATA_FLUSH_REQUEST: Transmit data flush Request - * - * @retval None - */ -#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) - -/** @brief Enable UART/USART associated to IRDA Handle - * @param __HANDLE__: specifies the IRDA Handle. - * The Handle Instance which can be USART1 or USART2. - * @retval None - */ -#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable UART/USART associated to IRDA Handle - * @param __HANDLE__: specifies the IRDA Handle. - * The Handle Instance which can be USART1 or USART2. - * @retval None - */ -#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** - * @} - */ - -/* Include IRDA HAL Extension module */ -#include "stm32f7xx_hal_irda_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup IRDA_Exported_Functions IrDA Exported Functions - * @{ - */ - -/** @addtogroup IRDA_Exported_Functions_Group1 IrDA Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); -/** - * @} - */ - -/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions - * @{ - */ - -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); -/** - * @} - */ - -/** @addtogroup IRDA_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ -/* Peripheral State methods **************************************************/ -HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda); -uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup IRDA_Private_Constants IRDA Private Constants - * @{ - */ - -/** @defgroup IRDA_Interruption_Mask IRDA Interruption Mask - * @{ - */ -#define IRDA_IT_MASK ((uint16_t)0x001F) -/** - * @} - */ -/** - * @} - */ - -/* Private macros --------------------------------------------------------*/ -/** @defgroup IRDA_Private_Macros IRDA Private Macros - * @{ - */ - -/** @brief Ensure that IRDA Baud rate is less or equal to maximum value - * @param __BAUDRATE__: specifies the IRDA Baudrate set by the user. - * @retval True or False - */ -#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201) - -/** @brief Ensure that IRDA prescaler value is strictly larger than 0 - * @param __PRESCALER__: specifies the IRDA prescaler value set by the user. - * @retval True or False - */ -#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0) - -#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \ - ((__PARITY__) == IRDA_PARITY_EVEN) || \ - ((__PARITY__) == IRDA_PARITY_ODD)) - -#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(IRDA_MODE_TX_RX)))) == (uint32_t)0x00) && ((__MODE__) != (uint32_t)0x00)) - -#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \ - ((__MODE__) == IRDA_POWERMODE_NORMAL)) - -#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \ - ((__STATE__) == IRDA_STATE_ENABLE)) - -#define IS_IRDA_MODE(__STATE__) (((__STATE__) == IRDA_MODE_DISABLE) || \ - ((__STATE__) == IRDA_MODE_ENABLE)) - -#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \ - ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE)) - -#define IS_IRDA_DMA_TX(__DMATX__) (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \ - ((__DMATX__) == IRDA_DMA_TX_ENABLE)) - -#define IS_IRDA_DMA_RX(__DMARX__) (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \ - ((__DMARX__) == IRDA_DMA_RX_ENABLE)) - -#define IS_IRDA_REQUEST_PARAMETER(PARAM) (((PARAM) == IRDA_AUTOBAUD_REQUEST) || \ - ((PARAM) == IRDA_SENDBREAK_REQUEST) || \ - ((PARAM) == IRDA_MUTE_MODE_REQUEST) || \ - ((PARAM) == IRDA_RXDATA_FLUSH_REQUEST) || \ - ((PARAM) == IRDA_TXDATA_FLUSH_REQUEST)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup IRDA_Private_Functions IRDA Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_IRDA_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |