diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c')
| -rw-r--r-- | c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c | 957 |
1 files changed, 0 insertions, 957 deletions
diff --git a/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c b/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c deleted file mode 100644 index 4b45bc100c..0000000000 --- a/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c +++ /dev/null @@ -1,957 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_fsmc.c - * @author MCD Application Team - * @version V1.4.0 - * @date 14-August-2015 - * @brief FSMC Low Layer HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the Flexible Static Memory Controller (FSMC) peripheral memories: - * + Initialization/de-initialization functions - * + Peripheral Control functions - * + Peripheral State functions - * - @verbatim - ============================================================================== - ##### FSMC peripheral features ##### - ============================================================================== - [..] The Flexible static memory controller (FSMC) includes two memory controllers: - (+) The NOR/PSRAM memory controller - (+) The NAND/PC Card memory controller - - [..] The FSMC functional block makes the interface with synchronous and asynchronous static - memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are: - (+) to translate AHB transactions into the appropriate external device protocol. - (+) to meet the access time requirements of the external memory devices. - - [..] All external memories share the addresses, data and control signals with the controller. - Each external device is accessed by means of a unique Chip Select. The FSMC performs - only one access at a time to an external device. - The main features of the FSMC controller are the following: - (+) Interface with static-memory mapped devices including: - (++) Static random access memory (SRAM). - (++) Read-only memory (ROM). - (++) NOR Flash memory/OneNAND Flash memory. - (++) PSRAM (4 memory banks). - (++) 16-bit PC Card compatible devices. - (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of - data. - (+) Independent Chip Select control for each memory bank. - (+) Independent configuration for each memory bank. - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FSMC_LL FSMC Low Layer - * @brief FSMC driver modules - * @{ - */ - -#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup FSMC_LL_Private_Functions - * @{ - */ - -/** @addtogroup FSMC_LL_NORSRAM - * @brief NORSRAM Controller functions - * - @verbatim - ============================================================================== - ##### How to use NORSRAM device driver ##### - ============================================================================== - - [..] - This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order - to run the NORSRAM external devices. - - (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit() - (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init() - (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init() - (+) FSMC NORSRAM bank extended timing configuration using the function - FSMC_NORSRAM_Extended_Timing_Init() - (+) FSMC NORSRAM bank enable/disable write operation using the functions - FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable() - -@endverbatim - * @{ - */ - -/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group1 - * @brief Initialization and Configuration functions - * - @verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FSMC NORSRAM interface - (+) De-initialize the FSMC NORSRAM interface - (+) Configure the FSMC clock and associated GPIOs - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the FSMC_NORSRAM device according to the specified - * control parameters in the FSMC_NORSRAM_InitTypeDef - * @param Device: Pointer to NORSRAM device instance - * @param Init: Pointer to NORSRAM Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef* Init) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank)); - assert_param(IS_FSMC_MUX(Init->DataAddressMux)); - assert_param(IS_FSMC_MEMORY(Init->MemoryType)); - assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth)); - assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode)); - assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity)); - assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode)); - assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive)); - assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation)); - assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal)); - assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode)); - assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait)); - assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst)); - - /* Get the BTCR register value */ - tmpr = Device->BTCR[Init->NSBank]; - - /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WRAPMOD, WAITCFG, WREN, - WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW and CCLKEN bits */ - tmpr &= ((uint32_t)~(FSMC_BCR1_MBKEN | FSMC_BCR1_MUXEN | FSMC_BCR1_MTYP | \ - FSMC_BCR1_MWID | FSMC_BCR1_FACCEN | FSMC_BCR1_BURSTEN | \ - FSMC_BCR1_WAITPOL | FSMC_BCR1_WRAPMOD | FSMC_BCR1_WAITCFG | \ - FSMC_BCR1_WREN | FSMC_BCR1_WAITEN | FSMC_BCR1_EXTMOD | \ - FSMC_BCR1_ASYNCWAIT | FSMC_BCR1_CBURSTRW)); - /* Set NORSRAM device control parameters */ - tmpr |= (uint32_t)(Init->DataAddressMux |\ - Init->MemoryType |\ - Init->MemoryDataWidth |\ - Init->BurstAccessMode |\ - Init->WaitSignalPolarity |\ - Init->WrapMode |\ - Init->WaitSignalActive |\ - Init->WriteOperation |\ - Init->WaitSignal |\ - Init->ExtendedMode |\ - Init->AsynchronousWait |\ - Init->WriteBurst - ); - - if(Init->MemoryType == FSMC_MEMORY_TYPE_NOR) - { - tmpr |= (uint32_t)FSMC_NORSRAM_FLASH_ACCESS_ENABLE; - } - - Device->BTCR[Init->NSBank] = tmpr; - - return HAL_OK; -} - -/** - * @brief DeInitialize the FSMC_NORSRAM peripheral - * @param Device: Pointer to NORSRAM device instance - * @param ExDevice: Pointer to NORSRAM extended mode device instance - * @param Bank: NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); - assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice)); - - /* Disable the FSMC_NORSRAM device */ - __FSMC_NORSRAM_DISABLE(Device, Bank); - - /* De-initialize the FSMC_NORSRAM device */ - /* FSMC_NORSRAM_BANK1 */ - if(Bank == FSMC_NORSRAM_BANK1) - { - Device->BTCR[Bank] = 0x000030DB; - } - /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */ - else - { - Device->BTCR[Bank] = 0x000030D2; - } - - Device->BTCR[Bank + 1] = 0x0FFFFFFF; - ExDevice->BWTR[Bank] = 0x0FFFFFFF; - - return HAL_OK; -} - - -/** - * @brief Initialize the FSMC_NORSRAM Timing according to the specified - * parameters in the FSMC_NORSRAM_TimingTypeDef - * @param Device: Pointer to NORSRAM device instance - * @param Timing: Pointer to NORSRAM Timing structure - * @param Bank: NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); - assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); - assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime)); - assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); - assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision)); - assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency)); - assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode)); - - /* Get the BTCR register value */ - tmpr = Device->BTCR[Bank + 1]; - - /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */ - tmpr &= ((uint32_t)~(FSMC_BTR1_ADDSET | FSMC_BTR1_ADDHLD | FSMC_BTR1_DATAST | \ - FSMC_BTR1_BUSTURN | FSMC_BTR1_CLKDIV | FSMC_BTR1_DATLAT | \ - FSMC_BTR1_ACCMOD)); - - /* Set FSMC_NORSRAM device timing parameters */ - tmpr |= (uint32_t)(Timing->AddressSetupTime |\ - ((Timing->AddressHoldTime) << 4) |\ - ((Timing->DataSetupTime) << 8) |\ - ((Timing->BusTurnAroundDuration) << 16) |\ - (((Timing->CLKDivision)-1) << 20) |\ - (((Timing->DataLatency)-2) << 24) |\ - (Timing->AccessMode)); - - Device->BTCR[Bank + 1] = tmpr; - - return HAL_OK; -} - -/** - * @brief Initialize the FSMC_NORSRAM Extended mode Timing according to the specified - * parameters in the FSMC_NORSRAM_TimingTypeDef - * @param Device: Pointer to NORSRAM device instance - * @param Timing: Pointer to NORSRAM Timing structure - * @param Bank: NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode) -{ - uint32_t tmpr = 0; - - /* Set NORSRAM device timing register for write configuration, if extended mode is used */ - if(ExtendedMode == FSMC_EXTENDED_MODE_ENABLE) - { - /* Check the parameters */ - assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); - assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); - assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime)); - assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); - assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision)); - assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency)); - assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode)); - - /* Get the BWTR register value */ - tmpr = Device->BWTR[Bank]; - - /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */ - tmpr &= ((uint32_t)~(FSMC_BWTR1_ADDSET | FSMC_BWTR1_ADDHLD | FSMC_BWTR1_DATAST | \ - FSMC_BWTR1_BUSTURN | FSMC_BWTR1_CLKDIV | FSMC_BWTR1_DATLAT | \ - FSMC_BWTR1_ACCMOD)); - - tmpr |= (uint32_t)(Timing->AddressSetupTime |\ - ((Timing->AddressHoldTime) << 4) |\ - ((Timing->DataSetupTime) << 8) |\ - ((Timing->BusTurnAroundDuration) << 16) |\ - (((Timing->CLKDivision)-1) << 20) |\ - (((Timing->DataLatency)-2) << 24) |\ - (Timing->AccessMode)); - - Device->BWTR[Bank] = tmpr; - } - else - { - Device->BWTR[Bank] = 0x0FFFFFFF; - } - - return HAL_OK; -} -/** - * @} - */ - -/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group2 - * @brief management functions - * -@verbatim - ============================================================================== - ##### FSMC_NORSRAM Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control dynamically - the FSMC NORSRAM interface. - -@endverbatim - * @{ - */ - -/** - * @brief Enables dynamically FSMC_NORSRAM write operation. - * @param Device: Pointer to NORSRAM device instance - * @param Bank: NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank) -{ - /* Enable write operation */ - Device->BTCR[Bank] |= FSMC_WRITE_OPERATION_ENABLE; - - return HAL_OK; -} - -/** - * @brief Disables dynamically FSMC_NORSRAM write operation. - * @param Device: Pointer to NORSRAM device instance - * @param Bank: NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank) -{ - /* Disable write operation */ - Device->BTCR[Bank] &= ~FSMC_WRITE_OPERATION_ENABLE; - - return HAL_OK; -} -/** - * @} - */ - -/** - * @} - */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -/** @addtogroup FSMC_LL_NAND - * @brief NAND Controller functions - * - @verbatim - ============================================================================== - ##### How to use NAND device driver ##### - ============================================================================== - [..] - This driver contains a set of APIs to interface with the FSMC NAND banks in order - to run the NAND external devices. - - (+) FSMC NAND bank reset using the function FSMC_NAND_DeInit() - (+) FSMC NAND bank control configuration using the function FSMC_NAND_Init() - (+) FSMC NAND bank common space timing configuration using the function - FSMC_NAND_CommonSpace_Timing_Init() - (+) FSMC NAND bank attribute space timing configuration using the function - FSMC_NAND_AttributeSpace_Timing_Init() - (+) FSMC NAND bank enable/disable ECC correction feature using the functions - FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable() - (+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC() - -@endverbatim - * @{ - */ - -/** @addtogroup FSMC_LL_NAND_Private_Functions_Group1 - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FSMC NAND interface - (+) De-initialize the FSMC NAND interface - (+) Configure the FSMC clock and associated GPIOs - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the FSMC_NAND device according to the specified - * control parameters in the FSMC_NAND_HandleTypeDef - * @param Device: Pointer to NAND device instance - * @param Init: Pointer to NAND Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FSMC_NAND_BANK(Init->NandBank)); - assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature)); - assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth)); - assert_param(IS_FSMC_ECC_STATE(Init->EccComputation)); - assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize)); - assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime)); - assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime)); - - if(Init->NandBank == FSMC_NAND_BANK2) - { - /* Get the NAND bank 2 register value */ - tmpr = Device->PCR2; - } - else - { - /* Get the NAND bank 3 register value */ - tmpr = Device->PCR3; - } - - /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */ - tmpr &= ((uint32_t)~(FSMC_PCR2_PWAITEN | FSMC_PCR2_PBKEN | FSMC_PCR2_PTYP | \ - FSMC_PCR2_PWID | FSMC_PCR2_ECCEN | FSMC_PCR2_TCLR | \ - FSMC_PCR2_TAR | FSMC_PCR2_ECCPS)); - - /* Set NAND device control parameters */ - tmpr |= (uint32_t)(Init->Waitfeature |\ - FSMC_PCR_MEMORY_TYPE_NAND |\ - Init->MemoryDataWidth |\ - Init->EccComputation |\ - Init->ECCPageSize |\ - ((Init->TCLRSetupTime) << 9) |\ - ((Init->TARSetupTime) << 13)); - - if(Init->NandBank == FSMC_NAND_BANK2) - { - /* NAND bank 2 registers configuration */ - Device->PCR2 = tmpr; - } - else - { - /* NAND bank 3 registers configuration */ - Device->PCR3 = tmpr; - } - - return HAL_OK; -} - -/** - * @brief Initializes the FSMC_NAND Common space Timing according to the specified - * parameters in the FSMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to NAND device instance - * @param Timing: Pointer to NAND timing structure - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); - - if(Bank == FSMC_NAND_BANK2) - { - /* Get the NAND bank 2 register value */ - tmpr = Device->PMEM2; - } - else - { - /* Get the NAND bank 3 register value */ - tmpr = Device->PMEM3; - } - - /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */ - tmpr &= ((uint32_t)~(FSMC_PMEM2_MEMSET2 | FSMC_PMEM2_MEMWAIT2 | FSMC_PMEM2_MEMHOLD2 | \ - FSMC_PMEM2_MEMHIZ2)); - - /* Set FSMC_NAND device timing parameters */ - tmpr |= (uint32_t)(Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - ((Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24) - ); - - if(Bank == FSMC_NAND_BANK2) - { - /* NAND bank 2 registers configuration */ - Device->PMEM2 = tmpr; - } - else - { - /* NAND bank 3 registers configuration */ - Device->PMEM3 = tmpr; - } - - return HAL_OK; -} - -/** - * @brief Initializes the FSMC_NAND Attribute space Timing according to the specified - * parameters in the FSMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to NAND device instance - * @param Timing: Pointer to NAND timing structure - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); - - if(Bank == FSMC_NAND_BANK2) - { - /* Get the NAND bank 2 register value */ - tmpr = Device->PATT2; - } - else - { - /* Get the NAND bank 3 register value */ - tmpr = Device->PATT3; - } - - /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */ - tmpr &= ((uint32_t)~(FSMC_PATT2_ATTSET2 | FSMC_PATT2_ATTWAIT2 | FSMC_PATT2_ATTHOLD2 | \ - FSMC_PATT2_ATTHIZ2)); - - /* Set FSMC_NAND device timing parameters */ - tmpr |= (uint32_t)(Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - ((Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24) - ); - - if(Bank == FSMC_NAND_BANK2) - { - /* NAND bank 2 registers configuration */ - Device->PATT2 = tmpr; - } - else - { - /* NAND bank 3 registers configuration */ - Device->PATT3 = tmpr; - } - - return HAL_OK; -} - -/** - * @brief DeInitializes the FSMC_NAND device - * @param Device: Pointer to NAND device instance - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Disable the NAND Bank */ - __FSMC_NAND_DISABLE(Device, Bank); - - /* De-initialize the NAND Bank */ - if(Bank == FSMC_NAND_BANK2) - { - /* Set the FSMC_NAND_BANK2 registers to their reset values */ - Device->PCR2 = 0x00000018; - Device->SR2 = 0x00000040; - Device->PMEM2 = 0xFCFCFCFC; - Device->PATT2 = 0xFCFCFCFC; - } - /* FSMC_Bank3_NAND */ - else - { - /* Set the FSMC_NAND_BANK3 registers to their reset values */ - Device->PCR3 = 0x00000018; - Device->SR3 = 0x00000040; - Device->PMEM3 = 0xFCFCFCFC; - Device->PATT3 = 0xFCFCFCFC; - } - - return HAL_OK; -} -/** - * @} - */ - -/** @addtogroup FSMC_LL_NAND_Private_Functions_Group2 - * @brief management functions - * -@verbatim - ============================================================================== - ##### FSMC_NAND Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control dynamically - the FSMC NAND interface. - -@endverbatim - * @{ - */ - -/** - * @brief Enables dynamically FSMC_NAND ECC feature. - * @param Device: Pointer to NAND device instance - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Enable ECC feature */ - if(Bank == FSMC_NAND_BANK2) - { - Device->PCR2 |= FSMC_PCR2_ECCEN; - } - else - { - Device->PCR3 |= FSMC_PCR3_ECCEN; - } - - return HAL_OK; -} - -/** - * @brief Disables dynamically FSMC_NAND ECC feature. - * @param Device: Pointer to NAND device instance - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Disable ECC feature */ - if(Bank == FSMC_NAND_BANK2) - { - Device->PCR2 &= ~FSMC_PCR2_ECCEN; - } - else - { - Device->PCR3 &= ~FSMC_PCR3_ECCEN; - } - - return HAL_OK; -} - -/** - * @brief Disables dynamically FSMC_NAND ECC feature. - * @param Device: Pointer to NAND device instance - * @param ECCval: Pointer to ECC value - * @param Bank: NAND bank number - * @param Timeout: Timeout wait value - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout) -{ - uint32_t tickstart = 0; - - /* Check the parameters */ - assert_param(IS_FSMC_NAND_DEVICE(Device)); - assert_param(IS_FSMC_NAND_BANK(Bank)); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until FIFO is empty */ - while(__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT) == RESET) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - return HAL_TIMEOUT; - } - } - } - - if(Bank == FSMC_NAND_BANK2) - { - /* Get the ECCR2 register value */ - *ECCval = (uint32_t)Device->ECCR2; - } - else - { - /* Get the ECCR3 register value */ - *ECCval = (uint32_t)Device->ECCR3; - } - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup FSMC_LL_PCCARD - * @brief PCCARD Controller functions - * - @verbatim - ============================================================================== - ##### How to use PCCARD device driver ##### - ============================================================================== - [..] - This driver contains a set of APIs to interface with the FSMC PCCARD bank in order - to run the PCCARD/compact flash external devices. - - (+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit() - (+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init() - (+) FSMC PCCARD bank common space timing configuration using the function - FSMC_PCCARD_CommonSpace_Timing_Init() - (+) FSMC PCCARD bank attribute space timing configuration using the function - FSMC_PCCARD_AttributeSpace_Timing_Init() - (+) FSMC PCCARD bank IO space timing configuration using the function - FSMC_PCCARD_IOSpace_Timing_Init() - -@endverbatim - * @{ - */ - -/** @addtogroup FSMC_LL_PCCARD_Private_Functions_Group1 - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FSMC PCCARD interface - (+) De-initialize the FSMC PCCARD interface - (+) Configure the FSMC clock and associated GPIOs - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the FSMC_PCCARD device according to the specified - * control parameters in the FSMC_PCCARD_HandleTypeDef - * @param Device: Pointer to PCCARD device instance - * @param Init: Pointer to PCCARD Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature)); - assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime)); - assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime)); - - /* Get PCCARD control register value */ - tmpr = Device->PCR4; - - /* Clear TAR, TCLR, PWAITEN and PWID bits */ - tmpr &= ((uint32_t)~(FSMC_PCR4_TAR | FSMC_PCR4_TCLR | FSMC_PCR4_PWAITEN | \ - FSMC_PCR4_PWID)); - - /* Set FSMC_PCCARD device control parameters */ - tmpr |= (uint32_t)(Init->Waitfeature |\ - FSMC_NAND_PCC_MEM_BUS_WIDTH_16 |\ - (Init->TCLRSetupTime << 9) |\ - (Init->TARSetupTime << 13)); - - Device->PCR4 = tmpr; - - return HAL_OK; -} - -/** - * @brief Initializes the FSMC_PCCARD Common space Timing according to the specified - * parameters in the FSMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to PCCARD device instance - * @param Timing: Pointer to PCCARD timing structure - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); - - /* Get PCCARD common space timing register value */ - tmpr = Device->PMEM4; - - /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */ - tmpr &= ((uint32_t)~(FSMC_PMEM4_MEMSET4 | FSMC_PMEM4_MEMWAIT4 | FSMC_PMEM4_MEMHOLD4 | \ - FSMC_PMEM4_MEMHIZ4)); - /* Set PCCARD timing parameters */ - tmpr |= (uint32_t)((Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - (Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24)); - - Device->PMEM4 = tmpr; - - return HAL_OK; -} - -/** - * @brief Initializes the FSMC_PCCARD Attribute space Timing according to the specified - * parameters in the FSMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to PCCARD device instance - * @param Timing: Pointer to PCCARD timing structure - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); - - /* Get PCCARD timing parameters */ - tmpr = Device->PATT4; - - /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */ - tmpr &= ((uint32_t)~(FSMC_PATT4_ATTSET4 | FSMC_PATT4_ATTWAIT4 | FSMC_PATT4_ATTHOLD4 | \ - FSMC_PATT4_ATTHIZ4)); - - /* Set PCCARD timing parameters */ - tmpr |= (uint32_t)(Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - ((Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24)); - Device->PATT4 = tmpr; - - return HAL_OK; -} - -/** - * @brief Initializes the FSMC_PCCARD IO space Timing according to the specified - * parameters in the FSMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to PCCARD device instance - * @param Timing: Pointer to PCCARD timing structure - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); - - /* Get FSMC_PCCARD device timing parameters */ - tmpr = Device->PIO4; - - /* Clear IOSET4, IOWAIT4, IOHOLD4 and IOHIZ4 bits */ - tmpr &= ((uint32_t)~(FSMC_PIO4_IOSET4 | FSMC_PIO4_IOWAIT4 | FSMC_PIO4_IOHOLD4 | \ - FSMC_PIO4_IOHIZ4)); - - /* Set FSMC_PCCARD device timing parameters */ - tmpr |= (uint32_t)(Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - ((Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24)); - - Device->PIO4 = tmpr; - - return HAL_OK; -} - -/** - * @brief DeInitializes the FSMC_PCCARD device - * @param Device: Pointer to PCCARD device instance - * @retval HAL status - */ -HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device) -{ - /* Disable the FSMC_PCCARD device */ - __FSMC_PCCARD_DISABLE(Device); - - /* De-initialize the FSMC_PCCARD device */ - Device->PCR4 = 0x00000018; - Device->SR4 = 0x00000000; - Device->PMEM4 = 0xFCFCFCFC; - Device->PATT4 = 0xFCFCFCFC; - Device->PIO4 = 0xFCFCFCFC; - - return HAL_OK; -} -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ -#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |