diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c')
| -rw-r--r-- | c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c | 1733 |
1 files changed, 0 insertions, 1733 deletions
diff --git a/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c b/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c deleted file mode 100644 index 14ea215459..0000000000 --- a/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c +++ /dev/null @@ -1,1733 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_fmc.c - * @author MCD Application Team - * @version V1.4.0 - * @date 14-August-2015 - * @brief FMC Low Layer HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the Flexible Memory Controller (FMC) peripheral memories: - * + Initialization/de-initialization functions - * + Peripheral Control functions - * + Peripheral State functions - * - @verbatim - ============================================================================== - ##### FMC peripheral features ##### - ============================================================================== - [..] The Flexible memory controller (FMC) includes three memory controllers: - (+) The NOR/PSRAM memory controller - (+) The NAND/PC Card memory controller - (+) The Synchronous DRAM (SDRAM) controller - - [..] The FMC functional block makes the interface with synchronous and asynchronous static - memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are: - (+) to translate AHB transactions into the appropriate external device protocol - (+) to meet the access time requirements of the external memory devices - - [..] All external memories share the addresses, data and control signals with the controller. - Each external device is accessed by means of a unique Chip Select. The FMC performs - only one access at a time to an external device. - The main features of the FMC controller are the following: - (+) Interface with static-memory mapped devices including: - (++) Static random access memory (SRAM) - (++) Read-only memory (ROM) - (++) NOR Flash memory/OneNAND Flash memory - (++) PSRAM (4 memory banks) - (++) 16-bit PC Card compatible devices - (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of - data - (+) Interface with synchronous DRAM (SDRAM) memories - (+) Independent Chip Select control for each memory bank - (+) Independent configuration for each memory bank - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FMC_LL FMC Low Layer - * @brief FMC driver modules - * @{ - */ - -#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) || defined(HAL_SDRAM_MODULE_ENABLED) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup FMC_LL_Private_Functions - * @{ - */ - -/** @addtogroup FMC_LL_NORSRAM - * @brief NORSRAM Controller functions - * - @verbatim - ============================================================================== - ##### How to use NORSRAM device driver ##### - ============================================================================== - - [..] - This driver contains a set of APIs to interface with the FMC NORSRAM banks in order - to run the NORSRAM external devices. - - (+) FMC NORSRAM bank reset using the function FMC_NORSRAM_DeInit() - (+) FMC NORSRAM bank control configuration using the function FMC_NORSRAM_Init() - (+) FMC NORSRAM bank timing configuration using the function FMC_NORSRAM_Timing_Init() - (+) FMC NORSRAM bank extended timing configuration using the function - FMC_NORSRAM_Extended_Timing_Init() - (+) FMC NORSRAM bank enable/disable write operation using the functions - FMC_NORSRAM_WriteOperation_Enable()/FMC_NORSRAM_WriteOperation_Disable() - - -@endverbatim - * @{ - */ - -/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group1 - * @brief Initialization and Configuration functions - * - @verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FMC NORSRAM interface - (+) De-initialize the FMC NORSRAM interface - (+) Configure the FMC clock and associated GPIOs - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the FMC_NORSRAM device according to the specified - * control parameters in the FMC_NORSRAM_InitTypeDef - * @param Device: Pointer to NORSRAM device instance - * @param Init: Pointer to NORSRAM Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef* Init) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_DEVICE(Device)); - assert_param(IS_FMC_NORSRAM_BANK(Init->NSBank)); - assert_param(IS_FMC_MUX(Init->DataAddressMux)); - assert_param(IS_FMC_MEMORY(Init->MemoryType)); - assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth)); - assert_param(IS_FMC_BURSTMODE(Init->BurstAccessMode)); - assert_param(IS_FMC_WAIT_POLARITY(Init->WaitSignalPolarity)); -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - assert_param(IS_FMC_WRAP_MODE(Init->WrapMode)); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive)); - assert_param(IS_FMC_WRITE_OPERATION(Init->WriteOperation)); - assert_param(IS_FMC_WAITE_SIGNAL(Init->WaitSignal)); - assert_param(IS_FMC_EXTENDED_MODE(Init->ExtendedMode)); - assert_param(IS_FMC_ASYNWAIT(Init->AsynchronousWait)); - assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst)); - assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock)); -#if defined (STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - assert_param(IS_FMC_WRITE_FIFO(Init->WriteFifo)); - assert_param(IS_FMC_PAGESIZE(Init->PageSize)); -#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ - - /* Get the BTCR register value */ - tmpr = Device->BTCR[Init->NSBank]; - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WRAPMOD, WAITCFG, WREN, - WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW and CCLKEN bits */ - tmpr &= ((uint32_t)~(FMC_BCR1_MBKEN | FMC_BCR1_MUXEN | FMC_BCR1_MTYP | \ - FMC_BCR1_MWID | FMC_BCR1_FACCEN | FMC_BCR1_BURSTEN | \ - FMC_BCR1_WAITPOL | FMC_BCR1_WRAPMOD | FMC_BCR1_WAITCFG | \ - FMC_BCR1_WREN | FMC_BCR1_WAITEN | FMC_BCR1_EXTMOD | \ - FMC_BCR1_ASYNCWAIT | FMC_BCR1_CBURSTRW | FMC_BCR1_CCLKEN)); - - /* Set NORSRAM device control parameters */ - tmpr |= (uint32_t)(Init->DataAddressMux |\ - Init->MemoryType |\ - Init->MemoryDataWidth |\ - Init->BurstAccessMode |\ - Init->WaitSignalPolarity |\ - Init->WrapMode |\ - Init->WaitSignalActive |\ - Init->WriteOperation |\ - Init->WaitSignal |\ - Init->ExtendedMode |\ - Init->AsynchronousWait |\ - Init->WriteBurst |\ - Init->ContinuousClock); -#else /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) */ - /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, CPSIZE, WAITCFG, WREN, - WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW, CCLKEN and WFDIS bits */ - tmpr &= ((uint32_t)~(FMC_BCR1_MBKEN | FMC_BCR1_MUXEN | FMC_BCR1_MTYP | \ - FMC_BCR1_MWID | FMC_BCR1_FACCEN | FMC_BCR1_BURSTEN | \ - FMC_BCR1_WAITPOL | FMC_BCR1_WAITCFG | FMC_BCR1_CPSIZE | \ - FMC_BCR1_WREN | FMC_BCR1_WAITEN | FMC_BCR1_EXTMOD | \ - FMC_BCR1_ASYNCWAIT | FMC_BCR1_CBURSTRW | FMC_BCR1_CCLKEN | \ - FMC_BCR1_WFDIS)); - - /* Set NORSRAM device control parameters */ - tmpr |= (uint32_t)(Init->DataAddressMux |\ - Init->MemoryType |\ - Init->MemoryDataWidth |\ - Init->BurstAccessMode |\ - Init->WaitSignalPolarity |\ - Init->WaitSignalActive |\ - Init->WriteOperation |\ - Init->WaitSignal |\ - Init->ExtendedMode |\ - Init->AsynchronousWait |\ - Init->WriteBurst |\ - Init->ContinuousClock |\ - Init->PageSize |\ - Init->WriteFifo); -#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */ - - if(Init->MemoryType == FMC_MEMORY_TYPE_NOR) - { - tmpr |= (uint32_t)FMC_NORSRAM_FLASH_ACCESS_ENABLE; - } - - Device->BTCR[Init->NSBank] = tmpr; - - /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */ - if((Init->ContinuousClock == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FMC_NORSRAM_BANK1)) - { - Init->BurstAccessMode = FMC_BURST_ACCESS_MODE_ENABLE; - Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->BurstAccessMode |\ - Init->ContinuousClock); - } - -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - if(Init->NSBank != FMC_NORSRAM_BANK1) - { - Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->WriteFifo); - } -#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ - - return HAL_OK; -} - -/** - * @brief DeInitialize the FMC_NORSRAM peripheral - * @param Device: Pointer to NORSRAM device instance - * @param ExDevice: Pointer to NORSRAM extended mode device instance - * @param Bank: NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_DEVICE(Device)); - assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(ExDevice)); - assert_param(IS_FMC_NORSRAM_BANK(Bank)); - - /* Disable the FMC_NORSRAM device */ - __FMC_NORSRAM_DISABLE(Device, Bank); - - /* De-initialize the FMC_NORSRAM device */ - /* FMC_NORSRAM_BANK1 */ - if(Bank == FMC_NORSRAM_BANK1) - { - Device->BTCR[Bank] = 0x000030DB; - } - /* FMC_NORSRAM_BANK2, FMC_NORSRAM_BANK3 or FMC_NORSRAM_BANK4 */ - else - { - Device->BTCR[Bank] = 0x000030D2; - } - - Device->BTCR[Bank + 1] = 0x0FFFFFFF; - ExDevice->BWTR[Bank] = 0x0FFFFFFF; - - return HAL_OK; -} - -/** - * @brief Initialize the FMC_NORSRAM Timing according to the specified - * parameters in the FMC_NORSRAM_TimingTypeDef - * @param Device: Pointer to NORSRAM device instance - * @param Timing: Pointer to NORSRAM Timing structure - * @param Bank: NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_DEVICE(Device)); - assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); - assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); - assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime)); - assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); - assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision)); - assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency)); - assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode)); - assert_param(IS_FMC_NORSRAM_BANK(Bank)); - - /* Get the BTCR register value */ - tmpr = Device->BTCR[Bank + 1]; - - /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */ - tmpr &= ((uint32_t)~(FMC_BTR1_ADDSET | FMC_BTR1_ADDHLD | FMC_BTR1_DATAST | \ - FMC_BTR1_BUSTURN | FMC_BTR1_CLKDIV | FMC_BTR1_DATLAT | \ - FMC_BTR1_ACCMOD)); - - /* Set FMC_NORSRAM device timing parameters */ - tmpr |= (uint32_t)(Timing->AddressSetupTime |\ - ((Timing->AddressHoldTime) << 4) |\ - ((Timing->DataSetupTime) << 8) |\ - ((Timing->BusTurnAroundDuration) << 16) |\ - (((Timing->CLKDivision)-1) << 20) |\ - (((Timing->DataLatency)-2) << 24) |\ - (Timing->AccessMode)); - - Device->BTCR[Bank + 1] = tmpr; - - /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */ - if(HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN)) - { - tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1] & ~(((uint32_t)0x0F) << 20)); - tmpr |= (uint32_t)(((Timing->CLKDivision)-1) << 20); - Device->BTCR[FMC_NORSRAM_BANK1 + 1] = tmpr; - } - - return HAL_OK; -} - -/** - * @brief Initialize the FMC_NORSRAM Extended mode Timing according to the specified - * parameters in the FMC_NORSRAM_TimingTypeDef - * @param Device: Pointer to NORSRAM device instance - * @param Timing: Pointer to NORSRAM Timing structure - * @param Bank: NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode)); - - /* Set NORSRAM device timing register for write configuration, if extended mode is used */ - if(ExtendedMode == FMC_EXTENDED_MODE_ENABLE) - { - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(Device)); - assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); - assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); - assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime)); - assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision)); - assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency)); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode)); - assert_param(IS_FMC_NORSRAM_BANK(Bank)); - - /* Get the BWTR register value */ - tmpr = Device->BWTR[Bank]; - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */ - tmpr &= ((uint32_t)~(FMC_BWTR1_ADDSET | FMC_BWTR1_ADDHLD | FMC_BWTR1_DATAST | \ - FMC_BWTR1_BUSTURN | FMC_BWTR1_CLKDIV | FMC_BWTR1_DATLAT | \ - FMC_BWTR1_ACCMOD)); - - tmpr |= (uint32_t)(Timing->AddressSetupTime |\ - ((Timing->AddressHoldTime) << 4) |\ - ((Timing->DataSetupTime) << 8) |\ - ((Timing->BusTurnAroundDuration) << 16) |\ - (((Timing->CLKDivision)-1) << 20) |\ - (((Timing->DataLatency)-2) << 24) |\ - (Timing->AccessMode)); -#else /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) */ - /* Clear ADDSET, ADDHLD, DATAST, BUSTURN and ACCMOD bits */ - tmpr &= ((uint32_t)~(FMC_BWTR1_ADDSET | FMC_BWTR1_ADDHLD | FMC_BWTR1_DATAST | \ - FMC_BWTR1_BUSTURN | FMC_BWTR1_ACCMOD)); - - tmpr |= (uint32_t)(Timing->AddressSetupTime |\ - ((Timing->AddressHoldTime) << 4) |\ - ((Timing->DataSetupTime) << 8) |\ - ((Timing->BusTurnAroundDuration) << 16) |\ - (Timing->AccessMode)); -#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */ - - Device->BWTR[Bank] = tmpr; - } - else - { - Device->BWTR[Bank] = 0x0FFFFFFF; - } - - return HAL_OK; -} -/** - * @} - */ - -/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group2 - * @brief management functions - * -@verbatim - ============================================================================== - ##### FMC_NORSRAM Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control dynamically - the FMC NORSRAM interface. - -@endverbatim - * @{ - */ -/** - * @brief Enables dynamically FMC_NORSRAM write operation. - * @param Device: Pointer to NORSRAM device instance - * @param Bank: NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_DEVICE(Device)); - assert_param(IS_FMC_NORSRAM_BANK(Bank)); - - /* Enable write operation */ - Device->BTCR[Bank] |= FMC_WRITE_OPERATION_ENABLE; - - return HAL_OK; -} - -/** - * @brief Disables dynamically FMC_NORSRAM write operation. - * @param Device: Pointer to NORSRAM device instance - * @param Bank: NORSRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NORSRAM_DEVICE(Device)); - assert_param(IS_FMC_NORSRAM_BANK(Bank)); - - /* Disable write operation */ - Device->BTCR[Bank] &= ~FMC_WRITE_OPERATION_ENABLE; - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup FMC_LL_NAND - * @brief NAND Controller functions - * - @verbatim - ============================================================================== - ##### How to use NAND device driver ##### - ============================================================================== - [..] - This driver contains a set of APIs to interface with the FMC NAND banks in order - to run the NAND external devices. - - (+) FMC NAND bank reset using the function FMC_NAND_DeInit() - (+) FMC NAND bank control configuration using the function FMC_NAND_Init() - (+) FMC NAND bank common space timing configuration using the function - FMC_NAND_CommonSpace_Timing_Init() - (+) FMC NAND bank attribute space timing configuration using the function - FMC_NAND_AttributeSpace_Timing_Init() - (+) FMC NAND bank enable/disable ECC correction feature using the functions - FMC_NAND_ECC_Enable()/FMC_NAND_ECC_Disable() - (+) FMC NAND bank get ECC correction code using the function FMC_NAND_GetECC() - -@endverbatim - * @{ - */ - -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup HAL_FMC_NAND_Group1 Initialization/de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FMC NAND interface - (+) De-initialize the FMC NAND interface - (+) Configure the FMC clock and associated GPIOs - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the FMC_NAND device according to the specified - * control parameters in the FMC_NAND_HandleTypeDef - * @param Device: Pointer to NAND device instance - * @param Init: Pointer to NAND Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Init->NandBank)); - assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature)); - assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth)); - assert_param(IS_FMC_ECC_STATE(Init->EccComputation)); - assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize)); - assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime)); - assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime)); - - /* Get the NAND bank register value */ - tmpr = Device->PCR; - - /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */ - tmpr &= ((uint32_t)~(FMC_PCR_PWAITEN | FMC_PCR_PBKEN | FMC_PCR_PTYP | \ - FMC_PCR_PWID | FMC_PCR_ECCEN | FMC_PCR_TCLR | \ - FMC_PCR_TAR | FMC_PCR_ECCPS)); - - /* Set NAND device control parameters */ - tmpr |= (uint32_t)(Init->Waitfeature |\ - FMC_PCR_MEMORY_TYPE_NAND |\ - Init->MemoryDataWidth |\ - Init->EccComputation |\ - Init->ECCPageSize |\ - ((Init->TCLRSetupTime) << 9) |\ - ((Init->TARSetupTime) << 13)); - - /* NAND bank registers configuration */ - Device->PCR = tmpr; - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_NAND Common space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to NAND device instance - * @param Timing: Pointer to NAND timing structure - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Get the NAND bank 2 register value */ - tmpr = Device->PMEM; - - - /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */ - tmpr &= ((uint32_t)~(FMC_PMEM_MEMSET2 | FMC_PMEM_MEMWAIT2 | FMC_PMEM_MEMHOLD2 | \ - FMC_PMEM_MEMHIZ2)); - - /* Set FMC_NAND device timing parameters */ - tmpr |= (uint32_t)(Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - ((Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24) - ); - - /* NAND bank registers configuration */ - Device->PMEM = tmpr; - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_NAND Attribute space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to NAND device instance - * @param Timing: Pointer to NAND timing structure - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Get the NAND bank register value */ - tmpr = Device->PATT; - - /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */ - tmpr &= ((uint32_t)~(FMC_PATT_ATTSET2 | FMC_PATT_ATTWAIT2 | FMC_PATT_ATTHOLD2 | \ - FMC_PATT_ATTHIZ2)); - - /* Set FMC_NAND device timing parameters */ - tmpr |= (uint32_t)(Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - ((Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24)); - - /* NAND bank registers configuration */ - Device->PATT = tmpr; - - return HAL_OK; -} - - -/** - * @brief DeInitializes the FMC_NAND device - * @param Device: Pointer to NAND device instance - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Disable the NAND Bank */ - __FMC_NAND_DISABLE(Device, Bank); - - /* De-initialize the NAND Bank */ - /* Set the FMC_NAND_BANK registers to their reset values */ - Device->PCR = 0x00000018; - Device->SR = 0x00000040; - Device->PMEM = 0xFCFCFCFC; - Device->PATT = 0xFCFCFCFC; - - return HAL_OK; -} - -/** - * @} - */ - - -/** @defgroup HAL_FMC_NAND_Group2 Control functions - * @brief management functions - * -@verbatim - ============================================================================== - ##### FMC_NAND Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control dynamically - the FMC NAND interface. - -@endverbatim - * @{ - */ - - -/** - * @brief Enables dynamically FMC_NAND ECC feature. - * @param Device: Pointer to NAND device instance - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Enable ECC feature */ - Device->PCR |= FMC_PCR_ECCEN; - - return HAL_OK; -} - - -/** - * @brief Disables dynamically FMC_NAND ECC feature. - * @param Device: Pointer to NAND device instance - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Disable ECC feature */ - Device->PCR &= ~FMC_PCR_ECCEN; - - return HAL_OK; -} - -/** - * @brief Disables dynamically FMC_NAND ECC feature. - * @param Device: Pointer to NAND device instance - * @param ECCval: Pointer to ECC value - * @param Bank: NAND bank number - * @param Timeout: Timeout wait value - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout) -{ - uint32_t tickstart = 0; - - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until FIFO is empty */ - while(__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - return HAL_TIMEOUT; - } - } - } - - /* Get the ECCR register value */ - *ECCval = (uint32_t)Device->ECCR; - - return HAL_OK; -} - -/** - * @} - */ - -#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */ -/** @defgroup HAL_FMC_NAND_Group1 Initialization/de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FMC NAND interface - (+) De-initialize the FMC NAND interface - (+) Configure the FMC clock and associated GPIOs - -@endverbatim - * @{ - */ -/** - * @brief Initializes the FMC_NAND device according to the specified - * control parameters in the FMC_NAND_HandleTypeDef - * @param Device: Pointer to NAND device instance - * @param Init: Pointer to NAND Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Init->NandBank)); - assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature)); - assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth)); - assert_param(IS_FMC_ECC_STATE(Init->EccComputation)); - assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize)); - assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime)); - assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime)); - - if(Init->NandBank == FMC_NAND_BANK2) - { - /* Get the NAND bank 2 register value */ - tmpr = Device->PCR2; - } - else - { - /* Get the NAND bank 3 register value */ - tmpr = Device->PCR3; - } - - /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */ - tmpr &= ((uint32_t)~(FMC_PCR2_PWAITEN | FMC_PCR2_PBKEN | FMC_PCR2_PTYP | \ - FMC_PCR2_PWID | FMC_PCR2_ECCEN | FMC_PCR2_TCLR | \ - FMC_PCR2_TAR | FMC_PCR2_ECCPS)); - - /* Set NAND device control parameters */ - tmpr |= (uint32_t)(Init->Waitfeature |\ - FMC_PCR_MEMORY_TYPE_NAND |\ - Init->MemoryDataWidth |\ - Init->EccComputation |\ - Init->ECCPageSize |\ - ((Init->TCLRSetupTime) << 9) |\ - ((Init->TARSetupTime) << 13)); - - if(Init->NandBank == FMC_NAND_BANK2) - { - /* NAND bank 2 registers configuration */ - Device->PCR2 = tmpr; - } - else - { - /* NAND bank 3 registers configuration */ - Device->PCR3 = tmpr; - } - - return HAL_OK; - -} - -/** - * @brief Initializes the FMC_NAND Common space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to NAND device instance - * @param Timing: Pointer to NAND timing structure - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - if(Bank == FMC_NAND_BANK2) - { - /* Get the NAND bank 2 register value */ - tmpr = Device->PMEM2; - } - else - { - /* Get the NAND bank 3 register value */ - tmpr = Device->PMEM3; - } - - /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */ - tmpr &= ((uint32_t)~(FMC_PMEM2_MEMSET2 | FMC_PMEM2_MEMWAIT2 | FMC_PMEM2_MEMHOLD2 | \ - FMC_PMEM2_MEMHIZ2)); - - /* Set FMC_NAND device timing parameters */ - tmpr |= (uint32_t)(Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - ((Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24) - ); - - if(Bank == FMC_NAND_BANK2) - { - /* NAND bank 2 registers configuration */ - Device->PMEM2 = tmpr; - } - else - { - /* NAND bank 3 registers configuration */ - Device->PMEM3 = tmpr; - } - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_NAND Attribute space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to NAND device instance - * @param Timing: Pointer to NAND timing structure - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - if(Bank == FMC_NAND_BANK2) - { - /* Get the NAND bank 2 register value */ - tmpr = Device->PATT2; - } - else - { - /* Get the NAND bank 3 register value */ - tmpr = Device->PATT3; - } - - /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */ - tmpr &= ((uint32_t)~(FMC_PATT2_ATTSET2 | FMC_PATT2_ATTWAIT2 | FMC_PATT2_ATTHOLD2 | \ - FMC_PATT2_ATTHIZ2)); - - /* Set FMC_NAND device timing parameters */ - tmpr |= (uint32_t)(Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - ((Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24)); - - if(Bank == FMC_NAND_BANK2) - { - /* NAND bank 2 registers configuration */ - Device->PATT2 = tmpr; - } - else - { - /* NAND bank 3 registers configuration */ - Device->PATT3 = tmpr; - } - - return HAL_OK; -} - -/** - * @brief DeInitializes the FMC_NAND device - * @param Device: Pointer to NAND device instance - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Disable the NAND Bank */ - __FMC_NAND_DISABLE(Device, Bank); - - /* De-initialize the NAND Bank */ - if(Bank == FMC_NAND_BANK2) - { - /* Set the FMC_NAND_BANK2 registers to their reset values */ - Device->PCR2 = 0x00000018; - Device->SR2 = 0x00000040; - Device->PMEM2 = 0xFCFCFCFC; - Device->PATT2 = 0xFCFCFCFC; - } - /* FMC_Bank3_NAND */ - else - { - /* Set the FMC_NAND_BANK3 registers to their reset values */ - Device->PCR3 = 0x00000018; - Device->SR3 = 0x00000040; - Device->PMEM3 = 0xFCFCFCFC; - Device->PATT3 = 0xFCFCFCFC; - } - - return HAL_OK; -} - -/** - * @} - */ - -/** @addtogroup FMC_LL_NAND_Private_Functions_Group2 - * @brief management functions - * -@verbatim - ============================================================================== - ##### FMC_NAND Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control dynamically - the FMC NAND interface. - -@endverbatim - * @{ - */ -/** - * @brief Enables dynamically FMC_NAND ECC feature. - * @param Device: Pointer to NAND device instance - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Enable ECC feature */ - if(Bank == FMC_NAND_BANK2) - { - Device->PCR2 |= FMC_PCR2_ECCEN; - } - else - { - Device->PCR3 |= FMC_PCR3_ECCEN; - } - - return HAL_OK; -} - -/** - * @brief Disables dynamically FMC_NAND ECC feature. - * @param Device: Pointer to NAND device instance - * @param Bank: NAND bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Disable ECC feature */ - if(Bank == FMC_NAND_BANK2) - { - Device->PCR2 &= ~FMC_PCR2_ECCEN; - } - else - { - Device->PCR3 &= ~FMC_PCR3_ECCEN; - } - - return HAL_OK; -} - -/** - * @brief Disables dynamically FMC_NAND ECC feature. - * @param Device: Pointer to NAND device instance - * @param ECCval: Pointer to ECC value - * @param Bank: NAND bank number - * @param Timeout: Timeout wait value - * @retval HAL status - */ -HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout) -{ - uint32_t tickstart = 0; - - /* Check the parameters */ - assert_param(IS_FMC_NAND_DEVICE(Device)); - assert_param(IS_FMC_NAND_BANK(Bank)); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until FIFO is empty */ - while(__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - return HAL_TIMEOUT; - } - } - } - - if(Bank == FMC_NAND_BANK2) - { - /* Get the ECCR2 register value */ - *ECCval = (uint32_t)Device->ECCR2; - } - else - { - /* Get the ECCR3 register value */ - *ECCval = (uint32_t)Device->ECCR3; - } - - return HAL_OK; -} - -/** - * @} - */ - -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) */ -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** @addtogroup FMC_LL_PCCARD - * @brief PCCARD Controller functions - * - @verbatim - ============================================================================== - ##### How to use PCCARD device driver ##### - ============================================================================== - [..] - This driver contains a set of APIs to interface with the FMC PCCARD bank in order - to run the PCCARD/compact flash external devices. - - (+) FMC PCCARD bank reset using the function FMC_PCCARD_DeInit() - (+) FMC PCCARD bank control configuration using the function FMC_PCCARD_Init() - (+) FMC PCCARD bank common space timing configuration using the function - FMC_PCCARD_CommonSpace_Timing_Init() - (+) FMC PCCARD bank attribute space timing configuration using the function - FMC_PCCARD_AttributeSpace_Timing_Init() - (+) FMC PCCARD bank IO space timing configuration using the function - FMC_PCCARD_IOSpace_Timing_Init() -@endverbatim - * @{ - */ - -/** @addtogroup FMC_LL_PCCARD_Private_Functions_Group1 - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FMC PCCARD interface - (+) De-initialize the FMC PCCARD interface - (+) Configure the FMC clock and associated GPIOs - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the FMC_PCCARD device according to the specified - * control parameters in the FMC_PCCARD_HandleTypeDef - * @param Device: Pointer to PCCARD device instance - * @param Init: Pointer to PCCARD Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_PCCARD_DEVICE(Device)); - assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature)); - assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime)); - assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime)); - - /* Get PCCARD control register value */ - tmpr = Device->PCR4; - - /* Clear TAR, TCLR, PWAITEN and PWID bits */ - tmpr &= ((uint32_t)~(FMC_PCR4_TAR | FMC_PCR4_TCLR | FMC_PCR4_PWAITEN | \ - FMC_PCR4_PWID)); - - /* Set FMC_PCCARD device control parameters */ - tmpr |= (uint32_t)(Init->Waitfeature |\ - FMC_NAND_PCC_MEM_BUS_WIDTH_16 |\ - (Init->TCLRSetupTime << 9) |\ - (Init->TARSetupTime << 13)); - - Device->PCR4 = tmpr; - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_PCCARD Common space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to PCCARD device instance - * @param Timing: Pointer to PCCARD timing structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_PCCARD_DEVICE(Device)); - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); - - /* Get PCCARD common space timing register value */ - tmpr = Device->PMEM4; - - /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */ - tmpr &= ((uint32_t)~(FMC_PMEM4_MEMSET4 | FMC_PMEM4_MEMWAIT4 | FMC_PMEM4_MEMHOLD4 | \ - FMC_PMEM4_MEMHIZ4)); - /* Set PCCARD timing parameters */ - tmpr |= (uint32_t)(Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - ((Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24)); - - Device->PMEM4 = tmpr; - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_PCCARD Attribute space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to PCCARD device instance - * @param Timing: Pointer to PCCARD timing structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_PCCARD_DEVICE(Device)); - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); - - /* Get PCCARD timing parameters */ - tmpr = Device->PATT4; - - /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */ - tmpr &= ((uint32_t)~(FMC_PATT4_ATTSET4 | FMC_PATT4_ATTWAIT4 | FMC_PATT4_ATTHOLD4 | \ - FMC_PATT4_ATTHIZ4)); - - /* Set PCCARD timing parameters */ - tmpr |= (uint32_t)(Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - ((Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24)); - Device->PATT4 = tmpr; - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_PCCARD IO space Timing according to the specified - * parameters in the FMC_NAND_PCC_TimingTypeDef - * @param Device: Pointer to PCCARD device instance - * @param Timing: Pointer to PCCARD timing structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing) -{ - uint32_t tmpr = 0; - - /* Check the parameters */ - assert_param(IS_FMC_PCCARD_DEVICE(Device)); - assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); - assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); - assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); - assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); - - /* Get FMC_PCCARD device timing parameters */ - tmpr = Device->PIO4; - - /* Clear IOSET4, IOWAIT4, IOHOLD4 and IOHIZ4 bits */ - tmpr &= ((uint32_t)~(FMC_PIO4_IOSET4 | FMC_PIO4_IOWAIT4 | FMC_PIO4_IOHOLD4 | \ - FMC_PIO4_IOHIZ4)); - - /* Set FMC_PCCARD device timing parameters */ - tmpr |= (uint32_t)(Timing->SetupTime |\ - ((Timing->WaitSetupTime) << 8) |\ - ((Timing->HoldSetupTime) << 16) |\ - ((Timing->HiZSetupTime) << 24)); - - Device->PIO4 = tmpr; - - return HAL_OK; -} - -/** - * @brief DeInitializes the FMC_PCCARD device - * @param Device: Pointer to PCCARD device instance - * @retval HAL status - */ -HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device) -{ - /* Check the parameters */ - assert_param(IS_FMC_PCCARD_DEVICE(Device)); - - /* Disable the FMC_PCCARD device */ - __FMC_PCCARD_DISABLE(Device); - - /* De-initialize the FMC_PCCARD device */ - Device->PCR4 = 0x00000018; - Device->SR4 = 0x00000000; - Device->PMEM4 = 0xFCFCFCFC; - Device->PATT4 = 0xFCFCFCFC; - Device->PIO4 = 0xFCFCFCFC; - - return HAL_OK; -} - -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - - -/** @addtogroup FMC_LL_SDRAM - * @brief SDRAM Controller functions - * - @verbatim - ============================================================================== - ##### How to use SDRAM device driver ##### - ============================================================================== - [..] - This driver contains a set of APIs to interface with the FMC SDRAM banks in order - to run the SDRAM external devices. - - (+) FMC SDRAM bank reset using the function FMC_SDRAM_DeInit() - (+) FMC SDRAM bank control configuration using the function FMC_SDRAM_Init() - (+) FMC SDRAM bank timing configuration using the function FMC_SDRAM_Timing_Init() - (+) FMC SDRAM bank enable/disable write operation using the functions - FMC_SDRAM_WriteOperation_Enable()/FMC_SDRAM_WriteOperation_Disable() - (+) FMC SDRAM bank send command using the function FMC_SDRAM_SendCommand() - -@endverbatim - * @{ - */ - -/** @addtogroup FMC_LL_SDRAM_Private_Functions_Group1 - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de_initialization functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the FMC SDRAM interface - (+) De-initialize the FMC SDRAM interface - (+) Configure the FMC clock and associated GPIOs - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the FMC_SDRAM device according to the specified - * control parameters in the FMC_SDRAM_InitTypeDef - * @param Device: Pointer to SDRAM device instance - * @param Init: Pointer to SDRAM Initialization structure - * @retval HAL status - */ -HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init) -{ - uint32_t tmpr1 = 0; - uint32_t tmpr2 = 0; - - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_SDRAM_BANK(Init->SDBank)); - assert_param(IS_FMC_COLUMNBITS_NUMBER(Init->ColumnBitsNumber)); - assert_param(IS_FMC_ROWBITS_NUMBER(Init->RowBitsNumber)); - assert_param(IS_FMC_SDMEMORY_WIDTH(Init->MemoryDataWidth)); - assert_param(IS_FMC_INTERNALBANK_NUMBER(Init->InternalBankNumber)); - assert_param(IS_FMC_CAS_LATENCY(Init->CASLatency)); - assert_param(IS_FMC_WRITE_PROTECTION(Init->WriteProtection)); - assert_param(IS_FMC_SDCLOCK_PERIOD(Init->SDClockPeriod)); - assert_param(IS_FMC_READ_BURST(Init->ReadBurst)); - assert_param(IS_FMC_READPIPE_DELAY(Init->ReadPipeDelay)); - - /* Set SDRAM bank configuration parameters */ - if (Init->SDBank != FMC_SDRAM_BANK2) - { - tmpr1 = Device->SDCR[FMC_SDRAM_BANK1]; - - /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */ - tmpr1 &= ((uint32_t)~(FMC_SDCR1_NC | FMC_SDCR1_NR | FMC_SDCR1_MWID | \ - FMC_SDCR1_NB | FMC_SDCR1_CAS | FMC_SDCR1_WP | \ - FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE)); - - - tmpr1 |= (uint32_t)(Init->ColumnBitsNumber |\ - Init->RowBitsNumber |\ - Init->MemoryDataWidth |\ - Init->InternalBankNumber |\ - Init->CASLatency |\ - Init->WriteProtection |\ - Init->SDClockPeriod |\ - Init->ReadBurst |\ - Init->ReadPipeDelay - ); - Device->SDCR[FMC_SDRAM_BANK1] = tmpr1; - } - else /* FMC_Bank2_SDRAM */ - { - tmpr1 = Device->SDCR[FMC_SDRAM_BANK1]; - - /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */ - tmpr1 &= ((uint32_t)~(FMC_SDCR1_NC | FMC_SDCR1_NR | FMC_SDCR1_MWID | \ - FMC_SDCR1_NB | FMC_SDCR1_CAS | FMC_SDCR1_WP | \ - FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE)); - - tmpr1 |= (uint32_t)(Init->SDClockPeriod |\ - Init->ReadBurst |\ - Init->ReadPipeDelay); - - tmpr2 = Device->SDCR[FMC_SDRAM_BANK2]; - - /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */ - tmpr2 &= ((uint32_t)~(FMC_SDCR1_NC | FMC_SDCR1_NR | FMC_SDCR1_MWID | \ - FMC_SDCR1_NB | FMC_SDCR1_CAS | FMC_SDCR1_WP | \ - FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE)); - - tmpr2 |= (uint32_t)(Init->ColumnBitsNumber |\ - Init->RowBitsNumber |\ - Init->MemoryDataWidth |\ - Init->InternalBankNumber |\ - Init->CASLatency |\ - Init->WriteProtection); - - Device->SDCR[FMC_SDRAM_BANK1] = tmpr1; - Device->SDCR[FMC_SDRAM_BANK2] = tmpr2; - } - - return HAL_OK; -} - -/** - * @brief Initializes the FMC_SDRAM device timing according to the specified - * parameters in the FMC_SDRAM_TimingTypeDef - * @param Device: Pointer to SDRAM device instance - * @param Timing: Pointer to SDRAM Timing structure - * @param Bank: SDRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank) -{ - uint32_t tmpr1 = 0; - uint32_t tmpr2 = 0; - - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_LOADTOACTIVE_DELAY(Timing->LoadToActiveDelay)); - assert_param(IS_FMC_EXITSELFREFRESH_DELAY(Timing->ExitSelfRefreshDelay)); - assert_param(IS_FMC_SELFREFRESH_TIME(Timing->SelfRefreshTime)); - assert_param(IS_FMC_ROWCYCLE_DELAY(Timing->RowCycleDelay)); - assert_param(IS_FMC_WRITE_RECOVERY_TIME(Timing->WriteRecoveryTime)); - assert_param(IS_FMC_RP_DELAY(Timing->RPDelay)); - assert_param(IS_FMC_RCD_DELAY(Timing->RCDDelay)); - assert_param(IS_FMC_SDRAM_BANK(Bank)); - - /* Set SDRAM device timing parameters */ - if (Bank != FMC_SDRAM_BANK2) - { - tmpr1 = Device->SDTR[FMC_SDRAM_BANK1]; - - /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */ - tmpr1 &= ((uint32_t)~(FMC_SDTR1_TMRD | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \ - FMC_SDTR1_TRC | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \ - FMC_SDTR1_TRCD)); - - tmpr1 |= (uint32_t)(((Timing->LoadToActiveDelay)-1) |\ - (((Timing->ExitSelfRefreshDelay)-1) << 4) |\ - (((Timing->SelfRefreshTime)-1) << 8) |\ - (((Timing->RowCycleDelay)-1) << 12) |\ - (((Timing->WriteRecoveryTime)-1) <<16) |\ - (((Timing->RPDelay)-1) << 20) |\ - (((Timing->RCDDelay)-1) << 24)); - Device->SDTR[FMC_SDRAM_BANK1] = tmpr1; - } - else /* FMC_Bank2_SDRAM */ - { - tmpr1 = Device->SDTR[FMC_SDRAM_BANK2]; - - /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */ - tmpr1 &= ((uint32_t)~(FMC_SDTR1_TMRD | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \ - FMC_SDTR1_TRC | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \ - FMC_SDTR1_TRCD)); - - tmpr1 |= (uint32_t)(((Timing->LoadToActiveDelay)-1) |\ - (((Timing->ExitSelfRefreshDelay)-1) << 4) |\ - (((Timing->SelfRefreshTime)-1) << 8) |\ - (((Timing->WriteRecoveryTime)-1) <<16) |\ - (((Timing->RCDDelay)-1) << 24)); - - tmpr2 = Device->SDTR[FMC_SDRAM_BANK1]; - - /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */ - tmpr2 &= ((uint32_t)~(FMC_SDTR1_TMRD | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \ - FMC_SDTR1_TRC | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \ - FMC_SDTR1_TRCD)); - tmpr2 |= (uint32_t)((((Timing->RowCycleDelay)-1) << 12) |\ - (((Timing->RPDelay)-1) << 20)); - - Device->SDTR[FMC_SDRAM_BANK2] = tmpr1; - Device->SDTR[FMC_SDRAM_BANK1] = tmpr2; - } - - return HAL_OK; -} - -/** - * @brief DeInitializes the FMC_SDRAM peripheral - * @param Device: Pointer to SDRAM device instance - * @retval HAL status - */ -HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_SDRAM_BANK(Bank)); - - /* De-initialize the SDRAM device */ - Device->SDCR[Bank] = 0x000002D0; - Device->SDTR[Bank] = 0x0FFFFFFF; - Device->SDCMR = 0x00000000; - Device->SDRTR = 0x00000000; - Device->SDSR = 0x00000000; - - return HAL_OK; -} - -/** - * @} - */ - -/** @addtogroup FMC_LL_SDRAMPrivate_Functions_Group2 - * @brief management functions - * -@verbatim - ============================================================================== - ##### FMC_SDRAM Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control dynamically - the FMC SDRAM interface. - -@endverbatim - * @{ - */ -/** - * @brief Enables dynamically FMC_SDRAM write protection. - * @param Device: Pointer to SDRAM device instance - * @param Bank: SDRAM bank number - * @retval HAL status - */ -HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_SDRAM_BANK(Bank)); - - /* Enable write protection */ - Device->SDCR[Bank] |= FMC_SDRAM_WRITE_PROTECTION_ENABLE; - - return HAL_OK; -} - -/** - * @brief Disables dynamically FMC_SDRAM write protection. - * @param hsdram: FMC_SDRAM handle - * @retval HAL status - */ -HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_SDRAM_BANK(Bank)); - - /* Disable write protection */ - Device->SDCR[Bank] &= ~FMC_SDRAM_WRITE_PROTECTION_ENABLE; - - return HAL_OK; -} - -/** - * @brief Send Command to the FMC SDRAM bank - * @param Device: Pointer to SDRAM device instance - * @param Command: Pointer to SDRAM command structure - * @param Timing: Pointer to SDRAM Timing structure - * @param Timeout: Timeout wait value - * @retval HAL state - */ -HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout) -{ - __IO uint32_t tmpr = 0; - uint32_t tickstart = 0; - - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_COMMAND_MODE(Command->CommandMode)); - assert_param(IS_FMC_COMMAND_TARGET(Command->CommandTarget)); - assert_param(IS_FMC_AUTOREFRESH_NUMBER(Command->AutoRefreshNumber)); - assert_param(IS_FMC_MODE_REGISTER(Command->ModeRegisterDefinition)); - - /* Set command register */ - tmpr = (uint32_t)((Command->CommandMode) |\ - (Command->CommandTarget) |\ - (((Command->AutoRefreshNumber)-1) << 5) |\ - ((Command->ModeRegisterDefinition) << 9) - ); - - Device->SDCMR = tmpr; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until command is send */ - while(HAL_IS_BIT_SET(Device->SDSR, FMC_SDSR_BUSY)) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - return HAL_TIMEOUT; - } - } - } - - return HAL_OK; -} - -/** - * @brief Program the SDRAM Memory Refresh rate. - * @param Device: Pointer to SDRAM device instance - * @param RefreshRate: The SDRAM refresh rate value. - * @retval HAL state - */ -HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_REFRESH_RATE(RefreshRate)); - - /* Set the refresh rate in command register */ - Device->SDRTR |= (RefreshRate<<1); - - return HAL_OK; -} - -/** - * @brief Set the Number of consecutive SDRAM Memory auto Refresh commands. - * @param Device: Pointer to SDRAM device instance - * @param AutoRefreshNumber: Specifies the auto Refresh number. - * @retval None - */ -HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber) -{ - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_AUTOREFRESH_NUMBER(AutoRefreshNumber)); - - /* Set the Auto-refresh number in command register */ - Device->SDCMR |= (AutoRefreshNumber << 5); - - return HAL_OK; -} - -/** - * @brief Returns the indicated FMC SDRAM bank mode status. - * @param Device: Pointer to SDRAM device instance - * @param Bank: Defines the FMC SDRAM bank. This parameter can be - * FMC_Bank1_SDRAM or FMC_Bank2_SDRAM. - * @retval The FMC SDRAM bank mode status, could be on of the following values: - * FMC_SDRAM_NORMAL_MODE, FMC_SDRAM_SELF_REFRESH_MODE or - * FMC_SDRAM_POWER_DOWN_MODE. - */ -uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_FMC_SDRAM_DEVICE(Device)); - assert_param(IS_FMC_SDRAM_BANK(Bank)); - - /* Get the corresponding bank mode */ - if(Bank == FMC_SDRAM_BANK1) - { - tmpreg = (uint32_t)(Device->SDSR & FMC_SDSR_MODES1); - } - else - { - tmpreg = ((uint32_t)(Device->SDSR & FMC_SDSR_MODES2) >> 2); - } - - /* Return the mode status */ - return tmpreg; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED || HAL_SDRAM_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |