diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h')
| -rw-r--r-- | c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h | 915 |
1 files changed, 0 insertions, 915 deletions
diff --git a/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h b/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h deleted file mode 100644 index d21f029164..0000000000 --- a/c/src/lib/libbsp/arm/stm32f4x/hal/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h +++ /dev/null @@ -1,915 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_sdmmc.h - * @author MCD Application Team - * @version V1.4.0 - * @date 14-August-2015 - * @brief Header file of SDMMC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_SDMMC_H -#define __STM32F4xx_LL_SDMMC_H - -#ifdef __cplusplus - extern "C" { -#endif -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_Driver - * @{ - */ - -/** @addtogroup SDMMC_LL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types - * @{ - */ - -/** - * @brief SDMMC Configuration Structure definition - */ -typedef struct -{ - uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref SDIO_Clock_Edge */ - - uint32_t ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is - enabled or disabled. - This parameter can be a value of @ref SDIO_Clock_Bypass */ - - uint32_t ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or - disabled when the bus is idle. - This parameter can be a value of @ref SDIO_Clock_Power_Save */ - - uint32_t BusWide; /*!< Specifies the SDIO bus width. - This parameter can be a value of @ref SDIO_Bus_Wide */ - - uint32_t HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. - This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ - - uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. - This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ - -}SDIO_InitTypeDef; - - -/** - * @brief SDIO Command Control structure - */ -typedef struct -{ - uint32_t Argument; /*!< Specifies the SDIO command argument which is sent - to a card as part of a command message. If a command - contains an argument, it must be loaded into this register - before writing the command to the command register. */ - - uint32_t CmdIndex; /*!< Specifies the SDIO command index. It must be Min_Data = 0 and - Max_Data = 64 */ - - uint32_t Response; /*!< Specifies the SDIO response type. - This parameter can be a value of @ref SDIO_Response_Type */ - - uint32_t WaitForInterrupt; /*!< Specifies whether SDIO wait for interrupt request is - enabled or disabled. - This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ - - uint32_t CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) - is enabled or disabled. - This parameter can be a value of @ref SDIO_CPSM_State */ -}SDIO_CmdInitTypeDef; - - -/** - * @brief SDIO Data Control structure - */ -typedef struct -{ - uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ - - uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */ - - uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer. - This parameter can be a value of @ref SDIO_Data_Block_Size */ - - uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer - is a read or write. - This parameter can be a value of @ref SDIO_Transfer_Direction */ - - uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode. - This parameter can be a value of @ref SDIO_Transfer_Type */ - - uint32_t DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) - is enabled or disabled. - This parameter can be a value of @ref SDIO_DPSM_State */ -}SDIO_DataInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants - * @{ - */ - -/** @defgroup SDIO_Clock_Edge Clock Edge - * @{ - */ -#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000) -#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE - -#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \ - ((EDGE) == SDIO_CLOCK_EDGE_FALLING)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Bypass Clock Bypass - * @{ - */ -#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000) -#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS - -#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \ - ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Power_Save Clock Power Saving - * @{ - */ -#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000) -#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV - -#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \ - ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_Bus_Wide Bus Width - * @{ - */ -#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000) -#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0 -#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1 - -#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \ - ((WIDE) == SDIO_BUS_WIDE_4B) || \ - ((WIDE) == SDIO_BUS_WIDE_8B)) -/** - * @} - */ - -/** @defgroup SDIO_Hardware_Flow_Control Hardware Flow Control - * @{ - */ -#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000) -#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN - -#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \ - ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Division Clock Division - * @{ - */ -#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFF) -/** - * @} - */ - -/** @defgroup SDIO_Command_Index Command Index - * @{ - */ -#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) -/** - * @} - */ - -/** @defgroup SDIO_Response_Type Response Type - * @{ - */ -#define SDIO_RESPONSE_NO ((uint32_t)0x00000000) -#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0 -#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP - -#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \ - ((RESPONSE) == SDIO_RESPONSE_SHORT) || \ - ((RESPONSE) == SDIO_RESPONSE_LONG)) -/** - * @} - */ - -/** @defgroup SDIO_Wait_Interrupt_State Wait Interrupt - * @{ - */ -#define SDIO_WAIT_NO ((uint32_t)0x00000000) -#define SDIO_WAIT_IT SDIO_CMD_WAITINT -#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND - -#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \ - ((WAIT) == SDIO_WAIT_IT) || \ - ((WAIT) == SDIO_WAIT_PEND)) -/** - * @} - */ - -/** @defgroup SDIO_CPSM_State CPSM State - * @{ - */ -#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000) -#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN - -#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \ - ((CPSM) == SDIO_CPSM_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_Response_Registers Response Register - * @{ - */ -#define SDIO_RESP1 ((uint32_t)0x00000000) -#define SDIO_RESP2 ((uint32_t)0x00000004) -#define SDIO_RESP3 ((uint32_t)0x00000008) -#define SDIO_RESP4 ((uint32_t)0x0000000C) - -#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \ - ((RESP) == SDIO_RESP2) || \ - ((RESP) == SDIO_RESP3) || \ - ((RESP) == SDIO_RESP4)) -/** - * @} - */ - -/** @defgroup SDIO_Data_Length Data Lenght - * @{ - */ -#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) -/** - * @} - */ - -/** @defgroup SDIO_Data_Block_Size Data Block Size - * @{ - */ -#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000) -#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0 -#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1 -#define SDIO_DATABLOCK_SIZE_8B ((uint32_t)0x00000030) -#define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2 -#define SDIO_DATABLOCK_SIZE_32B ((uint32_t)0x00000050) -#define SDIO_DATABLOCK_SIZE_64B ((uint32_t)0x00000060) -#define SDIO_DATABLOCK_SIZE_128B ((uint32_t)0x00000070) -#define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3 -#define SDIO_DATABLOCK_SIZE_512B ((uint32_t)0x00000090) -#define SDIO_DATABLOCK_SIZE_1024B ((uint32_t)0x000000A0) -#define SDIO_DATABLOCK_SIZE_2048B ((uint32_t)0x000000B0) -#define SDIO_DATABLOCK_SIZE_4096B ((uint32_t)0x000000C0) -#define SDIO_DATABLOCK_SIZE_8192B ((uint32_t)0x000000D0) -#define SDIO_DATABLOCK_SIZE_16384B ((uint32_t)0x000000E0) - -#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_16384B)) -/** - * @} - */ - -/** @defgroup SDIO_Transfer_Direction Transfer Direction - * @{ - */ -#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000) -#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR - -#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \ - ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO)) -/** - * @} - */ - -/** @defgroup SDIO_Transfer_Type Transfer Type - * @{ - */ -#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000) -#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE - -#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \ - ((MODE) == SDIO_TRANSFER_MODE_STREAM)) -/** - * @} - */ - -/** @defgroup SDIO_DPSM_State DPSM State - * @{ - */ -#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000) -#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN - -#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\ - ((DPSM) == SDIO_DPSM_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_Read_Wait_Mode Read Wait Mode - * @{ - */ -#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000) -#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000001) - -#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \ - ((MODE) == SDIO_READ_WAIT_MODE_DATA2)) -/** - * @} - */ - -/** @defgroup SDIO_Interrupt_sources Interrupt Sources - * @{ - */ -#define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL -#define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL -#define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT -#define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT -#define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR -#define SDIO_IT_RXOVERR SDIO_STA_RXOVERR -#define SDIO_IT_CMDREND SDIO_STA_CMDREND -#define SDIO_IT_CMDSENT SDIO_STA_CMDSENT -#define SDIO_IT_DATAEND SDIO_STA_DATAEND -#define SDIO_IT_STBITERR SDIO_STA_STBITERR -#define SDIO_IT_DBCKEND SDIO_STA_DBCKEND -#define SDIO_IT_CMDACT SDIO_STA_CMDACT -#define SDIO_IT_TXACT SDIO_STA_TXACT -#define SDIO_IT_RXACT SDIO_STA_RXACT -#define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE -#define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF -#define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF -#define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF -#define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE -#define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE -#define SDIO_IT_TXDAVL SDIO_STA_TXDAVL -#define SDIO_IT_RXDAVL SDIO_STA_RXDAVL -#define SDIO_IT_SDIOIT SDIO_STA_SDIOIT -#define SDIO_IT_CEATAEND SDIO_STA_CEATAEND -/** - * @} - */ - -/** @defgroup SDIO_Flags Flags - * @{ - */ -#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL -#define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL -#define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT -#define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT -#define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR -#define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR -#define SDIO_FLAG_CMDREND SDIO_STA_CMDREND -#define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT -#define SDIO_FLAG_DATAEND SDIO_STA_DATAEND -#define SDIO_FLAG_STBITERR SDIO_STA_STBITERR -#define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND -#define SDIO_FLAG_CMDACT SDIO_STA_CMDACT -#define SDIO_FLAG_TXACT SDIO_STA_TXACT -#define SDIO_FLAG_RXACT SDIO_STA_RXACT -#define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE -#define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF -#define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF -#define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF -#define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE -#define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE -#define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL -#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL -#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT -#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND -/** - * @} - */ - -/** - * @} - */ -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros - * @{ - */ - -/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region - * @{ - */ -/* ------------ SDIO registers bit address in the alias region -------------- */ -#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) - -/* --- CLKCR Register ---*/ -/* Alias word address of CLKEN bit */ -#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) -#define CLKEN_BITNUMBER 0x08 -#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BITNUMBER * 4)) - -/* --- CMD Register ---*/ -/* Alias word address of SDIOSUSPEND bit */ -#define CMD_OFFSET (SDIO_OFFSET + 0x0C) -#define SDIOSUSPEND_BITNUMBER 0x0B -#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BITNUMBER * 4)) - -/* Alias word address of ENCMDCOMPL bit */ -#define ENCMDCOMPL_BITNUMBER 0x0C -#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BITNUMBER * 4)) - -/* Alias word address of NIEN bit */ -#define NIEN_BITNUMBER 0x0D -#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BITNUMBER * 4)) - -/* Alias word address of ATACMD bit */ -#define ATACMD_BITNUMBER 0x0E -#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BITNUMBER * 4)) - -/* --- DCTRL Register ---*/ -/* Alias word address of DMAEN bit */ -#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) -#define DMAEN_BITNUMBER 0x03 -#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BITNUMBER * 4)) - -/* Alias word address of RWSTART bit */ -#define RWSTART_BITNUMBER 0x08 -#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BITNUMBER * 4)) - -/* Alias word address of RWSTOP bit */ -#define RWSTOP_BITNUMBER 0x09 -#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BITNUMBER * 4)) - -/* Alias word address of RWMOD bit */ -#define RWMOD_BITNUMBER 0x0A -#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BITNUMBER * 4)) - -/* Alias word address of SDIOEN bit */ -#define SDIOEN_BITNUMBER 0x0B -#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BITNUMBER * 4)) -/** - * @} - */ - -/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions - * @brief SDMMC_LL registers bit address in the alias region - * @{ - */ - -/* ---------------------- SDIO registers bit mask --------------------------- */ -/* --- CLKCR Register ---*/ -/* CLKCR register clear mask */ -#define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\ - SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\ - SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN)) - -/* --- PWRCTRL Register ---*/ -/* --- DCTRL Register ---*/ -/* SDIO DCTRL Clear Mask */ -#define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\ - SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE)) - -/* --- CMD Register ---*/ -/* CMD Register clear mask */ -#define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\ - SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\ - SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND)) - -/* SDIO RESP Registers Address */ -#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14)) - -/* SDIO Initialization Frequency (400KHz max) */ -#define SDIO_INIT_CLK_DIV ((uint8_t)0x76) - -/* SDIO Data Transfer Frequency (25MHz max) */ -#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0) -/** - * @} - */ - -/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ - -/** - * @brief Enable the SDIO device. - * @retval None - */ -#define __SDIO_ENABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE) - -/** - * @brief Disable the SDIO device. - * @retval None - */ -#define __SDIO_DISABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE) - -/** - * @brief Enable the SDIO DMA transfer. - * @retval None - */ -#define __SDIO_DMA_ENABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE) - -/** - * @brief Disable the SDIO DMA transfer. - * @retval None - */ -#define __SDIO_DMA_DISABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE) - -/** - * @brief Enable the SDIO device interrupt. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @retval None - */ -#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__)) - -/** - * @brief Disable the SDIO device interrupt. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @retval None - */ -#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__)) - -/** - * @brief Checks whether the specified SDIO flag is set or not. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) - * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode. - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_CMDACT: Command transfer in progress - * @arg SDIO_FLAG_TXACT: Data transmit in progress - * @arg SDIO_FLAG_RXACT: Data receive in progress - * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty - * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full - * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full - * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full - * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty - * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty - * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO - * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO - * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received - * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval The new state of SDIO_FLAG (SET or RESET). - */ -#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET) - - -/** - * @brief Clears the SDIO pending flags. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __FLAG__: specifies the flag to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) - * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received - * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval None - */ -#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__)) - -/** - * @brief Checks whether the specified SDIO interrupt has occurred or not. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__: specifies the SDIO interrupt source to check. - * This parameter can be one of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @retval The new state of SDIO_IT (SET or RESET). - */ -#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Clears the SDIO's interrupt pending bits. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__: specifies the interrupt pending bit to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval None - */ -#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__)) - -/** - * @brief Enable Start the SD I/O Read Wait operation. - * @retval None - */ -#define __SDIO_START_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE) - -/** - * @brief Disable Start the SD I/O Read Wait operations. - * @retval None - */ -#define __SDIO_START_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE) - -/** - * @brief Enable Start the SD I/O Read Wait operation. - * @retval None - */ -#define __SDIO_STOP_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE) - -/** - * @brief Disable Stop the SD I/O Read Wait operations. - * @retval None - */ -#define __SDIO_STOP_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE) - -/** - * @brief Enable the SD I/O Mode Operation. - * @retval None - */ -#define __SDIO_OPERATION_ENABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE) - -/** - * @brief Disable the SD I/O Mode Operation. - * @retval None - */ -#define __SDIO_OPERATION_DISABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE) - -/** - * @brief Enable the SD I/O Suspend command sending. - * @retval None - */ -#define __SDIO_SUSPEND_CMD_ENABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE) - -/** - * @brief Disable the SD I/O Suspend command sending. - * @retval None - */ -#define __SDIO_SUSPEND_CMD_DISABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE) - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -/** - * @brief Enable the command completion signal. - * @retval None - */ -#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE) - -/** - * @brief Disable the command completion signal. - * @retval None - */ -#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE) - -/** - * @brief Enable the CE-ATA interrupt. - * @retval None - */ -#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0) - -/** - * @brief Disable the CE-ATA interrupt. - * @retval None - */ -#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1) - -/** - * @brief Enable send CE-ATA command (CMD61). - * @retval None - */ -#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE) - -/** - * @brief Disable send CE-ATA command (CMD61). - * @retval None - */ -#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE ||\ - STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SDMMC_LL_Exported_Functions - * @{ - */ - -/* Initialization/de-initialization functions **********************************/ -/** @addtogroup HAL_SDMMC_LL_Group1 - * @{ - */ -HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init); -/** - * @} - */ - -/* I/O operation functions *****************************************************/ -/** @addtogroup HAL_SDMMC_LL_Group2 - * @{ - */ -/* Blocking mode: Polling */ -uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx); -HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData); -/** - * @} - */ - -/* Peripheral Control functions ************************************************/ -/** @addtogroup HAL_SDMMC_LL_Group3 - * @{ - */ -HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx); -HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx); -uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx); - -/* Command path state machine (CPSM) management functions */ -HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); -uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx); -uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); - -/* Data path state machine (DPSM) management functions */ -HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct); -uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx); -uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx); - -/* SDIO IO Cards mode management functions */ -HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_SDMMC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |