1 files changed, 0 insertions, 100 deletions
diff --git a/c/src/lib/libbsp/arm/smdk2410/timer/timer.c b/c/src/lib/libbsp/arm/smdk2410/timer/timer.c
deleted file mode 100644
index 2bc599df75..0000000000
--- a/c/src/lib/libbsp/arm/smdk2410/timer/timer.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/**
- * @file
- * @brief S3C2400 Timer driver
- *
- * This uses timer 1 for timing measurments.
- */
-
-/*
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-#include <rtems.h>
-#include <rtems/btimer.h>
-#include <s3c24xx.h>
-
-uint32_t g_start;
-uint32_t g_freq;
-
-bool benchmark_timer_find_average_overhead;
-
-
-/*
- * Set up Timer 1
- */
-void benchmark_timer_initialize( void )
-{
-    uint32_t cr;
-
-    /* stop TIMER1*/
-    cr=rTCON & 0xFFFFF0FF;
-    rTCON=(cr | (0x0 << 8));
-
-    /* set MUX for Timer1 to 1/2 */
-    cr=rTCFG1 & 0xFFFFFF0F;
-    rTCFG1=(cr | (0<<4));
-
-    /* input freq=PLCK/2 Mhz*/
-    g_freq = get_PCLK() / 2000;
-    rTCNTB1 = 0xFFFF;
-
-    /* start TIMER1 with manual reload */
-    cr=rTCON & 0xFFFFF0FF;
-    rTCON=(cr | (0x1 << 9));
-    rTCON=(cr | (0x1 << 8));
-
-    g_start =  rTCNTO1;
-}
-
-/*
- *  The following controls the behavior of benchmark_timer_read().
- *
- *  AVG_OVEREHAD is the overhead for starting and stopping the timer.  It
- *  is usually deducted from the number returned.
- *
- *  LEAST_VALID is the lowest number this routine should trust.  Numbers
- *  below this are "noise" and zero is returned.
- */
-
-#define AVG_OVERHEAD      0  /* It typically takes X.X microseconds */
-                             /* (Y countdowns) to start/stop the timer. */
-                             /* This value is in microseconds. */
-#define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
-
-benchmark_timer_t benchmark_timer_read( void )
-{
-    uint32_t t;
-    unsigned long long total;
-
-    t =  rTCNTO1;
-    /*
-     *  Total is calculated by taking into account the number of timer overflow
-     *  interrupts since the timer was initialized and clicks since the last
-     *  interrupts.
-     */
-
-    total = (g_start - t);
-
-    /* convert to microseconds */
-    total = (total*1000) / g_freq;
-
-    if ( benchmark_timer_find_average_overhead == 1 ) {
-        return (int) total;
-    } else if ( total < LEAST_VALID ) {
-        return 0;
-    }
-
-    /*
-     *  Somehow convert total into microseconds
-     */
-    return (total - AVG_OVERHEAD);
-}
-
-void benchmark_timer_disable_subtracting_average_overhead(bool find_flag)
-{
-    benchmark_timer_find_average_overhead = find_flag;
-}
-