diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in')
-rw-r--r-- | c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in | 100 |
1 files changed, 0 insertions, 100 deletions
diff --git a/c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in b/c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in deleted file mode 100644 index e37215510d..0000000000 --- a/c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in +++ /dev/null @@ -1,100 +0,0 @@ -/* include/bspopts.h.in. Generated from configure.ac by autoheader. */ - -/* If defined, then the BSP Framework will put a non-zero pattern into the - RTEMS Workspace and C program heap. This should assist in finding code that - assumes memory starts set to zero. */ -#undef BSP_DIRTY_MEMORY - -/* If defined, print a message and wait until pressed before resetting board - when application exits. */ -#undef BSP_PRESS_KEY_FOR_RESET - -/* If defined, reset the board when the application exits. */ -#undef BSP_RESET_BOARD_AT_EXIT - -/* disable testsuite samples with high memory demands */ -#undef BSP_SMALL_MEMORY - -/* reset vector address for BSP start */ -#undef BSP_START_RESET_VECTOR - -/* clock configuration for UART 3 */ -#undef LPC32XX_CONFIG_U3CLK - -/* clock configuration for UART 4 */ -#undef LPC32XX_CONFIG_U4CLK - -/* clock configuration for UART 5 */ -#undef LPC32XX_CONFIG_U5CLK - -/* clock configuration for UART 6 */ -#undef LPC32XX_CONFIG_U6CLK - -/* clock mode configuration for UARTs */ -#undef LPC32XX_CONFIG_UART_CLKMODE - -/* disable MMU */ -#undef LPC32XX_DISABLE_MMU - -/* disable MMU protection of read-only sections */ -#undef LPC32XX_DISABLE_READ_ONLY_PROTECTION - -/* disable cache for read-write data sections */ -#undef LPC32XX_DISABLE_READ_WRITE_DATA_CACHE - -/* bsp_reset() will use the watchdog to reset the chip */ -#undef LPC32XX_ENABLE_WATCHDOG_RESET - -/* enable RMII for Ethernet */ -#undef LPC32XX_ETHERNET_RMII - -/* main oscillator frequency in Hz */ -#undef LPC32XX_OSCILLATOR_MAIN - -/* RTC oscillator frequency in Hz */ -#undef LPC32XX_OSCILLATOR_RTC - -/* peripheral clock in Hz */ -#undef LPC32XX_PERIPH_CLK - -/* size of scratch area */ -#undef LPC32XX_SCRATCH_AREA_SIZE - -/* stop Ethernet controller at start-up to avoid DMA interference */ -#undef LPC32XX_STOP_ETHERNET - -/* stop general purpose DMA at start-up to avoid DMA interference */ -#undef LPC32XX_STOP_GPDMA - -/* stop USB controller at start-up to avoid DMA interference */ -#undef LPC32XX_STOP_USB - -/* baud for UART 1 */ -#undef LPC32XX_UART_1_BAUD - -/* baud for UART 2 */ -#undef LPC32XX_UART_2_BAUD - -/* baud for UART 7 */ -#undef LPC32XX_UART_7_BAUD - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* tests use printk() for output */ -#undef TESTS_USE_PRINTK |