diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/lpc24xx/README')
| -rw-r--r-- | c/src/lib/libbsp/arm/lpc24xx/README | 52 |
1 files changed, 0 insertions, 52 deletions
diff --git a/c/src/lib/libbsp/arm/lpc24xx/README b/c/src/lib/libbsp/arm/lpc24xx/README deleted file mode 100644 index 47cc16150d..0000000000 --- a/c/src/lib/libbsp/arm/lpc24xx/README +++ /dev/null @@ -1,52 +0,0 @@ -Development Board: QVGA Base Board from Embedded Artists - -http://www.embeddedartists.com/products/uclinux/oem_lpc2478.php - -Drivers: - - o Console - o Clock - o RTC - o SSP (SPI mode) - o Network - o I2C - -Howto setup QVGA Base Board? - - o Unpack board. - o Connect board via USB to your PC. - o Verify that demo application runs. - o Disconnect board. - o Change jumpers to enable ISP. - o Connect board. - o Load U-Boot image 'u-boot_v1.1.6_lpc2468oem_v1_8_16bit.hex' - (available from the EA support page) into the flash (flash tool - FlashMagic is availabe from NXP). - o Change jumbers back to disable ISP. - o Use a terminal program to change the U-Boot settings via the console. - o U-Boot settings: - set ethaddr '00:1a:f1:X:X:X' - set serverip 'X.X.X.X' - set ipaddr 'X.X.X.X' - set rtems 'tftp a1000000 lpc2478.img;bootm' - set bootcmd 'echo Booting RTEMS ...;run rtems' - saveenv - -Howto make a U-Boot image? - -mkimage -A arm -O rtems -T kernel -C gzip \ - -a a0000000 -e a0000040 -n "RTEMS Application" -d app.bin.gz app.img - -Application Board: NCS (Nurse Control Station) - - Board: NextGenNCS - Processor: NXP LPC2478 or LPC2470 - SDRAM: 8MByte, 16 bit wide - Ext. Flash: 1MByte, 16 bit wide - Console: UART, 115200 Baud - Network: 100Base-T - -Application Board: TLI800 - TLI800 is a network node using four serial ports produced by Thorn - Security Limited. It is used by Tyco Fire & Integrated Solutions for a - fire control network. |