diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/atsam/libraries/libchip/source/ssc.c')
-rw-r--r-- | c/src/lib/libbsp/arm/atsam/libraries/libchip/source/ssc.c | 219 |
1 files changed, 0 insertions, 219 deletions
diff --git a/c/src/lib/libbsp/arm/atsam/libraries/libchip/source/ssc.c b/c/src/lib/libbsp/arm/atsam/libraries/libchip/source/ssc.c deleted file mode 100644 index 08f1edde18..0000000000 --- a/c/src/lib/libbsp/arm/atsam/libraries/libchip/source/ssc.c +++ /dev/null @@ -1,219 +0,0 @@ -/* ---------------------------------------------------------------------------- */ -/* Atmel Microcontroller Software Support */ -/* SAM Software Package License */ -/* ---------------------------------------------------------------------------- */ -/* Copyright (c) 2015, Atmel Corporation */ -/* */ -/* All rights reserved. */ -/* */ -/* Redistribution and use in source and binary forms, with or without */ -/* modification, are permitted provided that the following condition is met: */ -/* */ -/* - Redistributions of source code must retain the above copyright notice, */ -/* this list of conditions and the disclaimer below. */ -/* */ -/* Atmel's name may not be used to endorse or promote products derived from */ -/* this software without specific prior written permission. */ -/* */ -/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */ -/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */ -/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */ -/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */ -/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */ -/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */ -/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */ -/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */ -/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ -/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/* ---------------------------------------------------------------------------- */ - -/** \addtogroup ssc_module Working with SSC - * \ingroup peripherals_module - * The SSC driver provides the interface to configure and use the SSC - * peripheral. - * - * !Usage - * - * -# Enable the SSC interface pins. - * -# Configure the SSC to operate at a specific frequency by calling - * SSC_Configure(). This function enables the peripheral clock of the SSC, - * but not its PIOs. - * -# Configure the transmitter and/or the receiver using the - * SSC_ConfigureTransmitter() and SSC_ConfigureEmitter() functions. - * -# Enable the PIOs or the transmitter and/or the received. - * -# Enable the transmitter and/or the receiver using SSC_EnableTransmitter() - * and SSC_EnableReceiver() - * -# Send data through the transmitter using SSC_Write() - * -# Receive data from the receiver using SSC_Read() - * -# Disable the transmitter and/or the receiver using SSC_DisableTransmitter() - * and SSC_DisableReceiver() - * - * For more accurate information, please look at the SSC section of the - * Datasheet. - * - * Related files :\n - * \ref ssc.c\n - * \ref ssc.h.\n - */ -/*@{*/ -/*@}*/ - - -/** - * \file - * - * Implementation of Synchronous Serial (SSC) controller. - * - */ - -/*---------------------------------------------------------------------------- - * Headers - *----------------------------------------------------------------------------*/ - -#include "chip.h" - -/*---------------------------------------------------------------------------- - * Exported functions - *----------------------------------------------------------------------------*/ - -/** - * \brief Configures a SSC peripheral.If the divided clock is not used, the - * master clock frequency can be set to 0. - * \note The emitter and transmitter are disabled by this function. - * \param ssc Pointer to an SSC instance. - * \param bitRate bit rate. - * \param masterClock master clock. - */ -void SSC_Configure(Ssc *ssc, uint32_t bitRate, uint32_t masterClock) -{ - uint32_t id; - // uint32_t maxClock; - id = ID_SSC; - // maxClock = PMC_SetPeriMaxClock(id, masterClock); - - /* Reset, disable receiver & transmitter */ - ssc->SSC_CR = SSC_CR_RXDIS | SSC_CR_TXDIS | SSC_CR_SWRST; - - /* Configure clock frequency */ - if (bitRate != 0) - ssc->SSC_CMR = masterClock / (2 * bitRate); - else - ssc->SSC_CMR = 0; - - /* Enable SSC peripheral clock */ - PMC_EnablePeripheral(id); -} - -/** - * \brief Configures the transmitter of a SSC peripheral. - * \param ssc Pointer to an SSC instance. - * \param tcmr Transmit Clock Mode Register value. - * \param tfmr Transmit Frame Mode Register value. - */ -void SSC_ConfigureTransmitter(Ssc *ssc, uint32_t tcmr, uint32_t tfmr) -{ - ssc->SSC_TCMR = tcmr; - ssc->SSC_TFMR = tfmr; -} - -/** - * \brief Configures the receiver of a SSC peripheral. - * \param ssc Pointer to an SSC instance. - * \param rcmr Receive Clock Mode Register value. - * \param rfmr Receive Frame Mode Register value. - */ -void SSC_ConfigureReceiver(Ssc *ssc, uint32_t rcmr, uint32_t rfmr) -{ - ssc->SSC_RCMR = rcmr; - ssc->SSC_RFMR = rfmr; -} - -/** - * \brief Enables the transmitter of a SSC peripheral. - * \param ssc Pointer to an SSC instance. - */ -void SSC_EnableTransmitter(Ssc *ssc) -{ - ssc->SSC_CR = SSC_CR_TXEN; -} - -/** - * \brief Disables the transmitter of a SSC peripheral. - * \param ssc Pointer to an SSC instance. - */ -void SSC_DisableTransmitter(Ssc *ssc) -{ - ssc->SSC_CR = SSC_CR_TXDIS; -} - -/** - * \brief Enables the receiver of a SSC peripheral. - * \param ssc Pointer to an SSC instance. - */ -void SSC_EnableReceiver(Ssc *ssc) -{ - ssc->SSC_CR = SSC_CR_RXEN; -} - -/** - * \brief Disables the receiver of a SSC peripheral. - * \param ssc Pointer to an SSC instance. - */ -void SSC_DisableReceiver(Ssc *ssc) -{ - ssc->SSC_CR = SSC_CR_RXDIS; -} - -/** - * \brief Enables one or more interrupt sources of a SSC peripheral. - * \param ssc Pointer to an SSC instance. - * \param sources Bitwise OR of selected interrupt sources. - */ -void SSC_EnableInterrupts(Ssc *ssc, uint32_t sources) -{ - ssc->SSC_IER = sources; -} - -/** - * \brief Disables one or more interrupt sources of a SSC peripheral. - * \param ssc Pointer to an SSC instance. - * \param sources Bitwise OR of selected interrupt sources. - */ -void SSC_DisableInterrupts(Ssc *ssc, uint32_t sources) -{ - ssc->SSC_IDR = sources; -} - -/** - * \brief Sends one data frame through a SSC peripheral. If another frame is currently - * being sent, this function waits for the previous transfer to complete. - * \param ssc Pointer to an SSC instance. - * \param frame Data frame to send. - */ -void SSC_Write(Ssc *ssc, uint32_t frame) -{ - while ((ssc->SSC_SR & SSC_SR_TXRDY) == 0); - - ssc->SSC_THR = frame; -} - -/** - * \brief Waits until one frame is received on a SSC peripheral, and returns it. - * \param ssc Pointer to an SSC instance. - */ -uint32_t SSC_Read(Ssc *ssc) -{ - while ((ssc->SSC_SR & SSC_SR_RXRDY) == 0); - - return ssc->SSC_RHR; -} - -/** - * \brief Return 1 if one frame is received, 0 otherwise. - * \param ssc Pointer to an SSC instance. - */ -uint8_t SSC_IsRxReady(Ssc *ssc) -{ - return ((ssc->SSC_SR & SSC_SR_RXRDY) > 0); -} - |