diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/atsam/libraries/libboard/include/wm8904.h')
| -rw-r--r-- | c/src/lib/libbsp/arm/atsam/libraries/libboard/include/wm8904.h | 160 |
1 files changed, 0 insertions, 160 deletions
diff --git a/c/src/lib/libbsp/arm/atsam/libraries/libboard/include/wm8904.h b/c/src/lib/libbsp/arm/atsam/libraries/libboard/include/wm8904.h deleted file mode 100644 index 1cf73cd34e..0000000000 --- a/c/src/lib/libbsp/arm/atsam/libraries/libboard/include/wm8904.h +++ /dev/null @@ -1,160 +0,0 @@ -/* ---------------------------------------------------------------------------- */ -/* Atmel Microcontroller Software Support */ -/* SAM Software Package License */ -/* ---------------------------------------------------------------------------- */ -/* Copyright (c) 2015, Atmel Corporation */ -/* */ -/* All rights reserved. */ -/* */ -/* Redistribution and use in source and binary forms, with or without */ -/* modification, are permitted provided that the following condition is met: */ -/* */ -/* - Redistributions of source code must retain the above copyright notice, */ -/* this list of conditions and the disclaimer below. */ -/* */ -/* Atmel's name may not be used to endorse or promote products derived from */ -/* this software without specific prior written permission. */ -/* */ -/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */ -/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */ -/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */ -/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */ -/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */ -/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */ -/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */ -/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */ -/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ -/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/* ---------------------------------------------------------------------------- */ - -/** - * \file - * - * Implementation WM8904 driver. - * - */ - -#ifndef WM8904_H -#define WM8904_H - -#include "board.h" - -/*---------------------------------------------------------------------------- - * Definitions - *----------------------------------------------------------------------------*/ -#define WM8904_CSB_STATE (0x0 << 0) - -/** Slave address */ -#define WM8904_SLAVE_ADDRESS 0x1a | WM8904_CSB_STATE -#define CS2100_SLAVE_ADDRESS 0x4E - - -/** Reset register*/ -#define WM8904_REG_RESET 0x00 - -/** Bias control 0 register*/ -#define WM8904_REG_BIAS_CTRL0 0x04 - -/** VMID control 0 register*/ -#define WM8904_REG_VMID_CTRL0 0x05 - -/** MIC Bias control 0 register*/ -#define WM8904_REG_MICBIAS_CTRL0 0x06 - -/** Bias control 1 register*/ -#define WM8904_REG_BIAS_CTRL1 0x07 - -/** Power management control 0 register*/ -#define WM8904_REG_POWER_MANG0 0x0C -/** Power management control 2 register*/ -#define WM8904_REG_POWER_MANG2 0x0E -/** Power management control 3 register*/ -#define WM8904_REG_POWER_MANG3 0x0F -/** Power management control 6 register*/ -#define WM8904_REG_POWER_MANG6 0x12 - -/** Clock rate0 register*/ -#define WM8904_REG_CLOCK_RATE0 0x14 -/** Clock rate1 register*/ -#define WM8904_REG_CLOCK_RATE1 0x15 - -/** Clock rate2 register*/ -#define WM8904_REG_CLOCK_RATE2 0x16 - -/** Audio interface0 register*/ -#define WM8904_REG_AUD_INF0 0x18 - -/** Audio interface1 register*/ -#define WM8904_REG_AUD_INF1 0x19 -/** Audio interface2 register*/ -#define WM8904_REG_AUD_INF2 0x1A -/** Audio interface3 register*/ -#define WM8904_REG_AUD_INF3 0x1B - -/** ADC digital 0 register*/ -#define WM8904_REG_ADC_DIG0 0x20 -/** ADC digital 1 register*/ -#define WM8904_REG_ADC_DIG1 0x21 - -/** Analogue left input 0 register*/ -#define WM8904_REG_ANALOGUE_LIN0 0x2C -/** Analogue right input 0 register*/ -#define WM8904_REG_ANALOGUE_RIN0 0x2D - -/** Analogue left input 1 register*/ -#define WM8904_REG_ANALOGUE_LIN1 0x2E -/** Analogue right input 1 register*/ -#define WM8904_REG_ANALOGUE_RIN1 0x2F - -/** Analogue left output 1 register*/ -#define WM8904_REG_ANALOGUE_LOUT1 0x39 -/** Analogue right output 1 register*/ -#define WM8904_REG_ANALOGUE_ROUT1 0x3A - -/** Analogue left output 2 register*/ -#define WM8904_REG_ANALOGUE_LOUT2 0x3B -/** Analogue right output 2 register*/ -#define WM8904_REG_ANALOGUE_ROUT2 0x3C - -/** Analogue output 12 ZC register*/ -#define WM8904_REG_ANALOGUE_OUT12ZC 0x3D - -/** DC servo 0 register*/ -#define WM8904_REG_DC_SERVO0 0x43 - -/** Analogue HP 0 register*/ -#define WM8904_REG_ANALOGUE_HP0 0x5A - -/** Charge pump 0 register*/ -#define WM8904_REG_CHARGE_PUMP0 0x62 - -/** Class W 0 register*/ -#define WM8904_REG_CLASS0 0x68 - -/** FLL control 1 register*/ -#define WM8904_REG_FLL_CRTL1 0x74 -/** FLL control 2 register*/ -#define WM8904_REG_FLL_CRTL2 0x75 -/** FLL control 3 register*/ -#define WM8904_REG_FLL_CRTL3 0x76 -/** FLL control 4 register*/ -#define WM8904_REG_FLL_CRTL4 0x77 -/** FLL control 5 register*/ -#define WM8904_REG_FLL_CRTL5 0x78 - -/** DUMMY register*/ -#define WM8904_REG_END 0xFF - -/*---------------------------------------------------------------------------- - * Exported functions - *----------------------------------------------------------------------------*/ - -extern uint16_t WM8904_Read(Twid *pTwid, uint32_t device, uint32_t regAddr); -extern void WM8904_Write(Twid *pTwid, uint32_t device, uint32_t regAddr, - uint16_t data); -extern uint8_t WM8904_Init(Twid *pTwid, uint32_t device, uint32_t PCK); -extern uint8_t WM8904_VolumeSet(Twid *pTwid, uint32_t device, uint16_t value); -extern void WM8904_IN2R_IN1L(Twid *pTwid, uint32_t device); -#endif // WM8904_H - - |