summaryrefslogtreecommitdiffstats
path: root/bsps/powerpc/gen83xx/net/network.c
diff options
context:
space:
mode:
Diffstat (limited to 'bsps/powerpc/gen83xx/net/network.c')
-rw-r--r--bsps/powerpc/gen83xx/net/network.c255
1 files changed, 0 insertions, 255 deletions
diff --git a/bsps/powerpc/gen83xx/net/network.c b/bsps/powerpc/gen83xx/net/network.c
deleted file mode 100644
index 04267176fb..0000000000
--- a/bsps/powerpc/gen83xx/net/network.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*===============================================================*\
-| Project: RTEMS support for MPC83xx |
-+-----------------------------------------------------------------+
-| Copyright (c) 2007 |
-| Embedded Brains GmbH |
-| Obere Lagerstr. 30 |
-| D-82178 Puchheim |
-| Germany |
-| rtems@embedded-brains.de |
-+-----------------------------------------------------------------+
-| The license and distribution terms for this file may be |
-| found in the file LICENSE in this distribution or at |
-| |
-| http://www.rtems.org/license/LICENSE. |
-| |
-+-----------------------------------------------------------------+
-| this file contains the board specific portion |
-| of the network interface driver |
-\*===============================================================*/
-
-#include <machine/rtems-bsd-kernel-space.h>
-
-#include <rtems.h>
-#include <rtems/rtems_bsdnet.h>
-#include <rtems/rtems_bsdnet_internal.h>
-#include <bsp.h>
-#include <bsp/tsec.h>
-#include <bsp/u-boot.h>
-#include <mpc83xx/mpc83xx.h>
-#include <string.h>
-#include <libcpu/spr.h>
-
-#if MPC83XX_CHIP_TYPE / 10 != 830
-
-#define TSEC_IFMODE_RGMII 0
-#define TSEC_IFMODE_GMII 1
-
-#if defined( MPC83XX_BOARD_MPC8313ERDB)
-
-#define TSEC_IFMODE TSEC_IFMODE_RGMII
-
-#elif defined( MPC83XX_BOARD_MPC8349EAMDS)
-
-#define TSEC_IFMODE TSEC_IFMODE_GMII
-
-#elif defined( MPC83XX_BOARD_HSC_CM01)
-
-#define TSEC_IFMODE TSEC_IFMODE_RGMII
-
-#else
-
-#warning No TSEC configuration available
-
-#endif
-
-/* System Version Register */
-#define SVR 286
-SPR_RO( SVR)
-
-/* Processor Version Register */
-SPR_RO( PPC_PVR)
-
-/*=========================================================================*\
-| Function: |
-\*-------------------------------------------------------------------------*/
-int BSP_tsec_attach
-(
-/*-------------------------------------------------------------------------*\
-| Purpose: |
-| attach or detach the driver |
-+---------------------------------------------------------------------------+
-| Input Parameters: |
-\*-------------------------------------------------------------------------*/
- struct rtems_bsdnet_ifconfig *config, /* interface configuration */
- int attaching /* 0 = detach, else attach */
-)
-/*-------------------------------------------------------------------------*\
-| Return Value: |
-| 1, if success |
-\*=========================================================================*/
-{
- tsec_config tsec_cfg;
- int unitNumber;
- char *unitName;
- uint32_t svr = _read_SVR();
- uint32_t pvr = _read_PPC_PVR();
-
- memset(&tsec_cfg, 0, sizeof(tsec_cfg));
- config->drv_ctrl = &tsec_cfg;
-
- /*
- * Parse driver name
- */
- if((unitNumber = rtems_bsdnet_parse_driver_name(config, &unitName)) < 0) {
- return 0;
- }
-
- tsec_cfg.reg_ptr = &mpc83xx.tsec [unitNumber - 1];
- tsec_cfg.mdio_ptr = &mpc83xx.tsec [0];
-
- if (attaching) {
-#if (TSEC_IFMODE==TSEC_IFMODE_GMII)
-#if !defined(MPC83XX_BOARD_HSC_CM01)
-
- /*
- * do not change system I/O configuration registers on HSC board
- * because should initialize from RCW
- */
-
-
- if (unitNumber == 1) {
- /*
- * init system I/O configuration registers
- * to ensure proper pin functions
- */
- mpc83xx.syscon.sicrh = mpc83xx.syscon.sicrh & ~0x1F800000;
- /*
- * init port registers (GPIO2DIR) for TSEC1
- */
- mpc83xx.gpio[1].gpdir = ((mpc83xx.gpio[1].gpdir & ~0x00000FFF)
- | 0x0000001f);
- }
- if (unitNumber == 2) {
- /*
- * init system I/O configuration registers
- * to ensure proper pin functions
- */
- mpc83xx.syscon.sicrh = mpc83xx.syscon.sicrh & ~0x007f8000;
- /*
- * init port registers (GPIO2DIR) for TSEC2
- */
- mpc83xx.gpio[0].gpdir = ((mpc83xx.gpio[0].gpdir & ~0x000FFFFF)
- | 0x00087881);
- }
-#endif /* !defined(MPC83XX_BOARD_HSC_CM01) */
-#endif
-#if (TSEC_IFMODE==TSEC_IFMODE_RGMII)
-
- /*
- * Nothing special needed for TSEC1 operation
- */
-#endif
- }
- /*
- * add MAC address into config->hardware_adderss
- * FIXME: get the real address we need
- */
- if (config->hardware_address == NULL) {
-#if !defined(HAS_UBOOT)
- static char hw_addr [TSEC_COUNT][6];
- volatile tsec_registers *reg_ptr = tsec_cfg.reg_ptr;
-
- /* read MAC address from hardware register */
- /* we expect it htere from the boot loader */
- config->hardware_address = hw_addr[unitNumber-1];
-
- hw_addr[unitNumber-1][5] = (reg_ptr->macstnaddr[0] >> 24) & 0xff;
- hw_addr[unitNumber-1][4] = (reg_ptr->macstnaddr[0] >> 16) & 0xff;
- hw_addr[unitNumber-1][3] = (reg_ptr->macstnaddr[0] >> 8) & 0xff;
- hw_addr[unitNumber-1][2] = (reg_ptr->macstnaddr[0] >> 0) & 0xff;
- hw_addr[unitNumber-1][1] = (reg_ptr->macstnaddr[1] >> 24) & 0xff;
- hw_addr[unitNumber-1][0] = (reg_ptr->macstnaddr[1] >> 16) & 0xff;
-#endif
-
-#if defined(HAS_UBOOT)
- switch (unitNumber) {
- case 1:
- config->hardware_address = bsp_uboot_board_info.bi_enetaddr;
- break;
-
-#ifdef CONFIG_HAS_ETH1
- case 2:
- config->hardware_address = bsp_uboot_board_info.bi_enet1addr;
- break;
-#endif /* CONFIG_HAS_ETH1 */
-
-#ifdef CONFIG_HAS_ETH2
- case 3:
- config->hardware_address = bsp_uboot_board_info.bi_enet2addr;
- break;
-#endif /* CONFIG_HAS_ETH2 */
-
-#ifdef CONFIG_HAS_ETH3
- case 4:
- config->hardware_address = bsp_uboot_board_info.bi_enet3addr;
- break;
-#endif /* CONFIG_HAS_ETH3 */
-
- default:
- return 0;
- }
-
-#endif /* HAS_UBOOT */
-
- }
- /*
- * set interrupt number for given interface
- */
- config->irno = (unsigned) (
- unitNumber == 1
- ? BSP_IPIC_IRQ_TSEC1_TX
- : BSP_IPIC_IRQ_TSEC2_TX
- );
-
- if (svr == 0x80b00010 && pvr == 0x80850010) {
- /*
- * This is a special case for MPC8313ERDB with silicon revision 1. Look in
- * "MPC8313ECE Rev. 3, 3/2008" errata for "IPIC 1".
- */
- if (unitNumber == 1) {
- tsec_cfg.irq_num_tx = 37;
- tsec_cfg.irq_num_rx = 36;
- tsec_cfg.irq_num_err = 35;
- } else if (unitNumber == 2) {
- tsec_cfg.irq_num_tx = 34;
- tsec_cfg.irq_num_rx = 33;
- tsec_cfg.irq_num_err = 32;
- } else {
- return 0;
- }
- } else {
- rtems_irq_number irno = unitNumber == 1 ?
- BSP_IPIC_IRQ_TSEC1_TX : BSP_IPIC_IRQ_TSEC2_TX;
-
- /* get base interrupt number (for Tx irq, Rx=base+1,Err=base+2) */
- tsec_cfg.irq_num_tx = irno + 0;
- tsec_cfg.irq_num_rx = irno + 1;
- tsec_cfg.irq_num_err = irno + 2;
- }
-
- /*
- * XXX: Although most hardware builders will assign the PHY addresses
- * like this, this should be more configurable
- */
-#ifdef MPC83XX_BOARD_MPC8313ERDB
- if (unitNumber == 2) {
- tsec_cfg.phy_default = 4;
- } else {
- /* TODO */
- return 0;
- }
-#else /* MPC83XX_BOARD_MPC8313ERDB */
- tsec_cfg.phy_default = unitNumber-1;
-#endif /* MPC83XX_BOARD_MPC8313ERDB */
-
- tsec_cfg.unit_number = unitNumber;
- tsec_cfg.unit_name = unitName;
-
- /*
- * call attach function of board independent driver
- */
- return tsec_driver_attach_detach(config, attaching);
-}
-
-#endif /* MPC83XX_CHIP_TYPE / 10 != 830 */
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-28 11:28:16 +0000