1 files changed, 49 insertions, 0 deletions
diff --git a/bsps/lm32/lm32_evr/README b/bsps/lm32/lm32_evr/README
new file mode 100644
index 0000000000..13712c91e0
--- /dev/null
+++ b/bsps/lm32/lm32_evr/README
@@ -0,0 +1,49 @@
+#  The Lattice Mico32 port uses the system_config.h generated by the Mico
+#  System Builder to retrieve the properties of the peripherals.
+#
+#   Implemented (in shared/ subdirectory)
+#     Polled console driver (uart)
+#     Clock interrupt with 10 ms tick
+#     Networking using Lattice tri-speed ethernet MAC
+#
+#   Todo
+#     Support more peripherals:
+#       - uart driver using interrupts
+#
+#  jukka.pietarinen@mrf.fi, 3.12.2008
+#    
+
+BSP NAME:           lm32_evr
+BOARD:              cRIO-EVR, Micro-Research Finland Oy
+BUS:                wishbone
+CPU FAMILY:         lm32 (Lattice Mico32)
+CPU:                small
+COPROCESSORS:       none
+MODE:               32 bit mode
+
+DEBUG MONITOR:      none
+
+PERIPHERALS
+===========
+TIMERS:             clock
+  RESOLUTION:       10 ms
+SERIAL PORTS:       uart
+REAL-TIME CLOCK:    none
+DMA:                none
+VIDEO:              none
+SCSI:               none
+NETWORKING:         tsmac
+
+To on the simulator included in lm32-gdb use these commands:
+
+tar sim --hw-device lm32cpu \
+  --hw-device "lm32uart/reg 0x80006000 0x100" \
+  --hw-device "/lm32uart > int int0 /lm32cpu" \
+  --hw-device "lm32timer/reg 0x80002000 0x80" \
+  --hw-device "/lm32timer > int int1 /lm32cpu" \
+  --memory-region 0x08000000,0x4000000
+load
+
+The simulator is VERY VERY slow when RTEMS is idle.
+To speed this up, add SIMULATOR_FAST_IDLE=1 to the
+configure command.