diff options
Diffstat (limited to 'bsps/arm/stm32h7/include/stm32h7xx_ll_opamp.h')
| -rw-r--r-- | bsps/arm/stm32h7/include/stm32h7xx_ll_opamp.h | 37 |
1 files changed, 18 insertions, 19 deletions
diff --git a/bsps/arm/stm32h7/include/stm32h7xx_ll_opamp.h b/bsps/arm/stm32h7/include/stm32h7xx_ll_opamp.h index 5ff7d76ce1..b76a0b665a 100644 --- a/bsps/arm/stm32h7/include/stm32h7xx_ll_opamp.h +++ b/bsps/arm/stm32h7/include/stm32h7xx_ll_opamp.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - * <h2><center>© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -200,10 +199,10 @@ typedef struct */ #define LL_OPAMP_INPUT_NONINVERT_IO0 0x00000000U /*!< OPAMP non inverting input connected to I/O VINP0 (PB0 for OPAMP1, PE9 for OPAMP2) - Note: On this STM32 serie, all OPAMPx are not available on all devices. Refer to device datasheet for more details */ + Note: On this STM32 series, all OPAMPx are not available on all devices. Refer to device datasheet for more details */ #define LL_OPAMP_INPUT_NONINVERT_DAC OPAMP_CSR_VPSEL_0 /*!< OPAMP non inverting input connected internally to DAC channel (DAC1_CH1 for OPAMP1, DAC1_CH2 for OPAMP2) - Note: On this STM32 serie, all OPAMPx are not available on all devices. Refer to device datasheet for more details */ + Note: On this STM32 series, all OPAMPx are not available on all devices. Refer to device datasheet for more details */ #if defined(DAC2) #define LL_OPAMP_INPUT_NONINVERT_DAC2 OPAMP_CSR_VPSEL_1 /*!< OPAMP non inverting input connected internally to DAC2 channel (DAC3 only for OPAMP2)*/ @@ -221,12 +220,12 @@ typedef struct */ #define LL_OPAMP_INPUT_INVERT_IO0 0x00000000U /*!< OPAMP inverting input connected to I/O VINM0 (PC5 for OPAMP1, PE8 for OPAMP2) - Note: On this STM32 serie, all OPAMPx are not available on all devices. Refer to device datasheet for more details */ + Note: On this STM32 series, all OPAMPx are not available on all devices. Refer to device datasheet for more details */ #define LL_OPAMP_INPUT_INVERT_IO1 OPAMP_CSR_VMSEL_0 /*!< OPAMP inverting input connected to I/0 VINM1 (PA7 for OPAMP1, PG1 for OPAMP2) - Note: On this STM32 serie, all OPAMPx are not available on all devices. Refer to device datasheet for more details */ + Note: On this STM32 series, all OPAMPx are not available on all devices. Refer to device datasheet for more details */ #define LL_OPAMP_INPUT_INVERT_CONNECT_NO OPAMP_CSR_VMSEL_1 /*!< OPAMP inverting input not externally connected (intended for OPAMP in mode follower or PGA with positive gain without bias). - Note: On this STM32 serie, this literal include cases of value 0x11 for mode follower and value 0x10 for mode PGA. */ + Note: On this STM32 series, this literal include cases of value 0x11 for mode follower and value 0x10 for mode PGA. */ /** * @} */ @@ -269,7 +268,7 @@ typedef struct /** @defgroup OPAMP_LL_EC_HW_DELAYS Definitions of OPAMP hardware constraints delays * @ingroup RTEMSBSPsARMSTM32H7 - * @note Only OPAMP IP HW delays are defined in OPAMP LL driver driver, + * @note Only OPAMP peripheral HW delays are defined in OPAMP LL driver driver, * not timeout values. * For details on delays values, refer to descriptions in source code * above each literal definition. @@ -520,7 +519,7 @@ __STATIC_INLINE void LL_OPAMP_SetPowerMode(OPAMP_TypeDef *OPAMPx, uint32_t Power */ __STATIC_INLINE uint32_t LL_OPAMP_GetPowerMode(OPAMP_TypeDef *OPAMPx) { - register uint32_t power_mode = (READ_BIT(OPAMPx->CSR, OPAMP_CSR_OPAHSM)); + uint32_t power_mode = (READ_BIT(OPAMPx->CSR, OPAMP_CSR_OPAHSM)); return (uint32_t)(power_mode | (power_mode >> (OPAMP_CSR_OPAHSM_Pos))); } @@ -595,7 +594,7 @@ __STATIC_INLINE void LL_OPAMP_SetInputInverting(OPAMP_TypeDef *OPAMPx, uint32_t */ __STATIC_INLINE uint32_t LL_OPAMP_GetInputInverting(OPAMP_TypeDef *OPAMPx) { - register uint32_t input_inverting = READ_BIT(OPAMPx->CSR, OPAMP_CSR_VMSEL); + uint32_t input_inverting = READ_BIT(OPAMPx->CSR, OPAMP_CSR_VMSEL); /* Manage cases 0x10 and 0x11 to return the same value: OPAMP inverting */ /* input not connected. */ @@ -682,7 +681,7 @@ __STATIC_INLINE void LL_OPAMP_SetCalibrationSelection(OPAMP_TypeDef *OPAMPx, uin */ __STATIC_INLINE uint32_t LL_OPAMP_GetCalibrationSelection(OPAMP_TypeDef *OPAMPx) { - register uint32_t CalibrationSelection = (uint32_t)(READ_BIT(OPAMPx->CSR, OPAMP_CSR_CALSEL)); + uint32_t CalibrationSelection = (uint32_t)(READ_BIT(OPAMPx->CSR, OPAMP_CSR_CALSEL)); return (uint32_t)((CalibrationSelection << 4)| (((CalibrationSelection & OPAMP_CSR_CALSEL_1) == 0UL) ? OPAMP_OTR_TRIMOFFSETN : OPAMP_OTR_TRIMOFFSETP)); @@ -722,7 +721,7 @@ __STATIC_INLINE uint32_t LL_OPAMP_IsCalibrationOutputSet(OPAMP_TypeDef *OPAMPx) */ __STATIC_INLINE void LL_OPAMP_SetTrimmingValue(OPAMP_TypeDef* OPAMPx, uint32_t PowerMode, uint32_t TransistorsDiffPair, uint32_t TrimmingValue) { - register __IO uint32_t *preg = __OPAMP_PTR_REG_OFFSET(OPAMPx->OTR, (PowerMode & OPAMP_POWERMODE_OTR_REGOFFSET_MASK)); + __IO uint32_t *preg = __OPAMP_PTR_REG_OFFSET(OPAMPx->OTR, (PowerMode & OPAMP_POWERMODE_OTR_REGOFFSET_MASK)); /* Set bits with position in register depending on parameter */ /* "TransistorsDiffPair". */ @@ -752,7 +751,7 @@ __STATIC_INLINE void LL_OPAMP_SetTrimmingValue(OPAMP_TypeDef* OPAMPx, uint32_t P */ __STATIC_INLINE uint32_t LL_OPAMP_GetTrimmingValue(OPAMP_TypeDef* OPAMPx, uint32_t PowerMode, uint32_t TransistorsDiffPair) { - register const __IO uint32_t *preg = __OPAMP_PTR_REG_OFFSET(OPAMPx->OTR, (PowerMode & OPAMP_POWERMODE_OTR_REGOFFSET_MASK)); + const __IO uint32_t *preg = __OPAMP_PTR_REG_OFFSET(OPAMPx->OTR, (PowerMode & OPAMP_POWERMODE_OTR_REGOFFSET_MASK)); /* Retrieve bits with position in register depending on parameter */ /* "TransistorsDiffPair". */ @@ -773,7 +772,7 @@ __STATIC_INLINE uint32_t LL_OPAMP_GetTrimmingValue(OPAMP_TypeDef* OPAMPx, uint32 /** * @brief Enable OPAMP instance. * @note After enable from off state, OPAMP requires a delay - * to fullfill wake up time specification. + * to fulfill wake up time specification. * Refer to device datasheet, parameter "tWAKEUP". * @rmtoll CSR OPAMPXEN LL_OPAMP_Enable * @param OPAMPx OPAMP instance @@ -845,4 +844,4 @@ void LL_OPAMP_StructInit(LL_OPAMP_InitTypeDef *OPAMP_InitStruct); #endif /* __STM32H7xx_LL_OPAMP_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + |