diff options
Diffstat (limited to 'bsps/arm/stm32h7/include/stm32h7xx_hal_pwr_ex.h')
| -rw-r--r-- | bsps/arm/stm32h7/include/stm32h7xx_hal_pwr_ex.h | 176 |
1 files changed, 111 insertions, 65 deletions
diff --git a/bsps/arm/stm32h7/include/stm32h7xx_hal_pwr_ex.h b/bsps/arm/stm32h7/include/stm32h7xx_hal_pwr_ex.h index cac1b3b3dd..f4ec3677db 100644 --- a/bsps/arm/stm32h7/include/stm32h7xx_hal_pwr_ex.h +++ b/bsps/arm/stm32h7/include/stm32h7xx_hal_pwr_ex.h @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -47,8 +46,8 @@ typedef struct { uint32_t AVDLevel; /*!< AVDLevel : Specifies the AVD detection level. This - parameter can be a value of @ref - PWREx_AVD_detection_level + parameter can be a value of @ref + PWREx_AVD_detection_level */ uint32_t Mode; /*!< Mode : Specifies the EXTI operating mode for the AVD @@ -105,25 +104,37 @@ typedef enum */ /* High level and No pull (default configuration) */ #define PWR_WAKEUP_PIN6 PWR_WKUPEPR_WKUPEN6 +#if defined (PWR_WKUPEPR_WKUPEN5) #define PWR_WAKEUP_PIN5 PWR_WKUPEPR_WKUPEN5 +#endif /* defined (PWR_WKUPEPR_WKUPEN5) */ #define PWR_WAKEUP_PIN4 PWR_WKUPEPR_WKUPEN4 +#if defined (PWR_WKUPEPR_WKUPEN3) #define PWR_WAKEUP_PIN3 PWR_WKUPEPR_WKUPEN3 +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ #define PWR_WAKEUP_PIN2 PWR_WKUPEPR_WKUPEN2 #define PWR_WAKEUP_PIN1 PWR_WKUPEPR_WKUPEN1 /* High level and No pull */ #define PWR_WAKEUP_PIN6_HIGH PWR_WKUPEPR_WKUPEN6 +#if defined (PWR_WKUPEPR_WKUPEN5) #define PWR_WAKEUP_PIN5_HIGH PWR_WKUPEPR_WKUPEN5 +#endif /* defined (PWR_WKUPEPR_WKUPEN5) */ #define PWR_WAKEUP_PIN4_HIGH PWR_WKUPEPR_WKUPEN4 +#if defined (PWR_WKUPEPR_WKUPEN3) #define PWR_WAKEUP_PIN3_HIGH PWR_WKUPEPR_WKUPEN3 +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ #define PWR_WAKEUP_PIN2_HIGH PWR_WKUPEPR_WKUPEN2 #define PWR_WAKEUP_PIN1_HIGH PWR_WKUPEPR_WKUPEN1 /* Low level and No pull */ #define PWR_WAKEUP_PIN6_LOW (PWR_WKUPEPR_WKUPP6 | PWR_WKUPEPR_WKUPEN6) +#if defined (PWR_WKUPEPR_WKUPP5) #define PWR_WAKEUP_PIN5_LOW (PWR_WKUPEPR_WKUPP5 | PWR_WKUPEPR_WKUPEN5) +#endif /* defined (PWR_WKUPEPR_WKUPP5) */ #define PWR_WAKEUP_PIN4_LOW (PWR_WKUPEPR_WKUPP4 | PWR_WKUPEPR_WKUPEN4) +#if defined (PWR_WKUPEPR_WKUPP3) #define PWR_WAKEUP_PIN3_LOW (PWR_WKUPEPR_WKUPP3 | PWR_WKUPEPR_WKUPEN3) +#endif /* defined (PWR_WKUPEPR_WKUPP3) */ #define PWR_WAKEUP_PIN2_LOW (PWR_WKUPEPR_WKUPP2 | PWR_WKUPEPR_WKUPEN2) #define PWR_WAKEUP_PIN1_LOW (PWR_WKUPEPR_WKUPP1 | PWR_WKUPEPR_WKUPEN1) /** @@ -157,13 +168,22 @@ typedef enum */ #define PWR_WAKEUP_FLAG1 PWR_WKUPFR_WKUPF1 /*!< Wakeup flag on PA0 */ #define PWR_WAKEUP_FLAG2 PWR_WKUPFR_WKUPF2 /*!< Wakeup flag on PA2 */ +#if defined (PWR_WKUPFR_WKUPF3) #define PWR_WAKEUP_FLAG3 PWR_WKUPFR_WKUPF3 /*!< Wakeup flag on PI8 */ +#endif /* defined (PWR_WKUPFR_WKUPF3) */ #define PWR_WAKEUP_FLAG4 PWR_WKUPFR_WKUPF4 /*!< Wakeup flag on PC13 */ +#if defined (PWR_WKUPFR_WKUPF5) #define PWR_WAKEUP_FLAG5 PWR_WKUPFR_WKUPF5 /*!< Wakeup flag on PI11 */ +#endif /* defined (PWR_WKUPFR_WKUPF5) */ #define PWR_WAKEUP_FLAG6 PWR_WKUPFR_WKUPF6 /*!< Wakeup flag on PC1 */ +#if defined (PWR_WKUPFR_WKUPF3) #define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\ PWR_WKUPFR_WKUPF3 | PWR_WKUPFR_WKUPF4 |\ PWR_WKUPFR_WKUPF5 | PWR_WKUPFR_WKUPF6) +#else +#define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\ + PWR_WKUPFR_WKUPF4 | PWR_WKUPFR_WKUPF6) +#endif /* defined (PWR_WKUPFR_WKUPF3) */ /** * @} */ @@ -223,13 +243,13 @@ typedef enum * @ingroup RTEMSBSPsARMSTM32H7 * @{ */ -#define PWR_LDO_SUPPLY PWR_CR3_LDOEN /*!< Core domains are suppplied from the LDO */ +#define PWR_LDO_SUPPLY PWR_CR3_LDOEN /*!< Core domains are supplied from the LDO */ #if defined (SMPS) -#define PWR_DIRECT_SMPS_SUPPLY PWR_CR3_SMPSEN /*!< Core domains are suppplied from the SMPS only */ +#define PWR_DIRECT_SMPS_SUPPLY PWR_CR3_SMPSEN /*!< Core domains are supplied from the SMPS only */ #define PWR_SMPS_1V8_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies the LDO which supplies the Core domains */ #define PWR_SMPS_2V5_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies the LDO which supplies the Core domains */ -#define PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies an external circuits and the LDO. The Core domains are suppplied from the LDO */ -#define PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies an external circuits and the LDO. The Core domains are suppplied from the LDO */ +#define PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */ +#define PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */ #define PWR_SMPS_1V8_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 1.8V output supplies an external source which supplies the Core domains */ #define PWR_SMPS_2V5_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 2.5V output supplies an external source which supplies the Core domains */ #endif /* defined (SMPS) */ @@ -506,12 +526,12 @@ do { \ /** @addtogroup PWREx_Exported_Functions_Group1 Power Supply Control Functions * @{ */ -HAL_StatusTypeDef HAL_PWREx_ConfigSupply(uint32_t SupplySource); -uint32_t HAL_PWREx_GetSupplyConfig(void); -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); -uint32_t HAL_PWREx_GetVoltageRange(void); -HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling(uint32_t VoltageScaling); -uint32_t HAL_PWREx_GetStopModeVoltageRange(void); +HAL_StatusTypeDef HAL_PWREx_ConfigSupply (uint32_t SupplySource); +uint32_t HAL_PWREx_GetSupplyConfig (void); +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling); +uint32_t HAL_PWREx_GetVoltageRange (void); +HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling (uint32_t VoltageScaling); +uint32_t HAL_PWREx_GetStopModeVoltageRange (void); /** * @} */ @@ -521,63 +541,67 @@ uint32_t HAL_PWREx_GetStopModeVoltageRange(void); */ /* System low power control functions */ #if defined (PWR_CPUCR_RETDS_CD) -void HAL_PWREx_EnterSTOP2Mode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWREx_EnterSTOP2Mode (uint32_t Regulator, uint8_t STOPEntry); #endif /* defined (PWR_CPUCR_RETDS_CD) */ -void HAL_PWREx_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry, uint32_t Domain); -void HAL_PWREx_EnterSTANDBYMode(uint32_t Domain); -void HAL_PWREx_ConfigD3Domain(uint32_t D3State); +void HAL_PWREx_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry, uint32_t Domain); +void HAL_PWREx_EnterSTANDBYMode (uint32_t Domain); +void HAL_PWREx_ConfigD3Domain (uint32_t D3State); /* Clear Cortex-Mx pending flag */ -void HAL_PWREx_ClearPendingEvent(void); +void HAL_PWREx_ClearPendingEvent (void); #if defined (DUAL_CORE) /* Clear domain flags */ -void HAL_PWREx_ClearDomainFlags(uint32_t DomainFlags); +void HAL_PWREx_ClearDomainFlags (uint32_t DomainFlags); /* Core Hold/Release functions */ -HAL_StatusTypeDef HAL_PWREx_HoldCore(uint32_t CPU); -void HAL_PWREx_ReleaseCore(uint32_t CPU); +HAL_StatusTypeDef HAL_PWREx_HoldCore (uint32_t CPU); +void HAL_PWREx_ReleaseCore (uint32_t CPU); #endif /* defined (DUAL_CORE) */ /* Flash low power control functions */ -void HAL_PWREx_EnableFlashPowerDown(void); -void HAL_PWREx_DisableFlashPowerDown(void); +void HAL_PWREx_EnableFlashPowerDown (void); +void HAL_PWREx_DisableFlashPowerDown (void); #if defined (PWR_CR1_SRDRAMSO) /* Memory shut-off functions */ -void HAL_PWREx_EnableMemoryShutOff(uint32_t MemoryBlock); -void HAL_PWREx_DisableMemoryShutOff(uint32_t MemoryBlock); +void HAL_PWREx_EnableMemoryShutOff (uint32_t MemoryBlock); +void HAL_PWREx_DisableMemoryShutOff (uint32_t MemoryBlock); #endif /* defined(PWR_CR1_SRDRAMSO) */ /* Wakeup Pins control functions */ -void HAL_PWREx_EnableWakeUpPin(PWREx_WakeupPinTypeDef *sPinParams); -void HAL_PWREx_DisableWakeUpPin(uint32_t WakeUpPin); -uint32_t HAL_PWREx_GetWakeupFlag(uint32_t WakeUpFlag); -HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag(uint32_t WakeUpFlag); +void HAL_PWREx_EnableWakeUpPin (PWREx_WakeupPinTypeDef *sPinParams); +void HAL_PWREx_DisableWakeUpPin (uint32_t WakeUpPin); +uint32_t HAL_PWREx_GetWakeupFlag (uint32_t WakeUpFlag); +HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag (uint32_t WakeUpFlag); /* Power Wakeup PIN IRQ Handler */ -void HAL_PWREx_WAKEUP_PIN_IRQHandler(void); -void HAL_PWREx_WKUP1_Callback(void); -void HAL_PWREx_WKUP2_Callback(void); -void HAL_PWREx_WKUP3_Callback(void); -void HAL_PWREx_WKUP4_Callback(void); -void HAL_PWREx_WKUP5_Callback(void); -void HAL_PWREx_WKUP6_Callback(void); +void HAL_PWREx_WAKEUP_PIN_IRQHandler (void); +void HAL_PWREx_WKUP1_Callback (void); +void HAL_PWREx_WKUP2_Callback (void); +#if defined (PWR_WKUPEPR_WKUPEN3) +void HAL_PWREx_WKUP3_Callback (void); +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ +void HAL_PWREx_WKUP4_Callback (void); +#if defined (PWR_WKUPEPR_WKUPEN5) +void HAL_PWREx_WKUP5_Callback (void); +#endif /* defined (PWR_WKUPEPR_WKUPEN5) */ +void HAL_PWREx_WKUP6_Callback (void); /** * @} */ -/** @addtogroup PWREx_Exported_Functions_Group3 Peripherals Control Functions +/** @addtogroup PWREx_Exported_Functions_Group3 Peripherals control functions * @{ */ /* Backup regulator control functions */ -HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); -HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); +HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg (void); +HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg (void); /* USB regulator control functions */ -HAL_StatusTypeDef HAL_PWREx_EnableUSBReg(void); -HAL_StatusTypeDef HAL_PWREx_DisableUSBReg(void); -void HAL_PWREx_EnableUSBVoltageDetector(void); -void HAL_PWREx_DisableUSBVoltageDetector(void); +HAL_StatusTypeDef HAL_PWREx_EnableUSBReg (void); +HAL_StatusTypeDef HAL_PWREx_DisableUSBReg (void); +void HAL_PWREx_EnableUSBVoltageDetector (void); +void HAL_PWREx_DisableUSBVoltageDetector (void); /* Battery control functions */ -void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorValue); -void HAL_PWREx_DisableBatteryCharging(void); -#if defined(PWR_CR1_BOOSTE) +void HAL_PWREx_EnableBatteryCharging (uint32_t ResistorValue); +void HAL_PWREx_DisableBatteryCharging (void); +#if defined (PWR_CR1_BOOSTE) /* Analog Booster functions */ -void HAL_PWREx_EnableAnalogBooster(void); -void HAL_PWREx_DisableAnalogBooster(void); +void HAL_PWREx_EnableAnalogBooster (void); +void HAL_PWREx_DisableAnalogBooster (void); #endif /* PWR_CR1_BOOSTE */ /** * @} @@ -587,20 +611,20 @@ void HAL_PWREx_DisableAnalogBooster(void); * @{ */ /* Power VBAT/Temperature monitoring functions */ -void HAL_PWREx_EnableMonitoring(void); -void HAL_PWREx_DisableMonitoring(void); -uint32_t HAL_PWREx_GetTemperatureLevel(void); -uint32_t HAL_PWREx_GetVBATLevel(void); -#if defined(PWR_CSR1_MMCVDO) -PWREx_MMC_VoltageLevel HAL_PWREx_GetMMCVoltage(void); +void HAL_PWREx_EnableMonitoring (void); +void HAL_PWREx_DisableMonitoring (void); +uint32_t HAL_PWREx_GetTemperatureLevel (void); +uint32_t HAL_PWREx_GetVBATLevel (void); +#if defined (PWR_CSR1_MMCVDO) +PWREx_MMC_VoltageLevel HAL_PWREx_GetMMCVoltage (void); #endif /* PWR_CSR1_MMCVDO */ /* Power AVD configuration functions */ -void HAL_PWREx_ConfigAVD(PWREx_AVDTypeDef *sConfigAVD); -void HAL_PWREx_EnableAVD(void); -void HAL_PWREx_DisableAVD(void); +void HAL_PWREx_ConfigAVD (PWREx_AVDTypeDef *sConfigAVD); +void HAL_PWREx_EnableAVD (void); +void HAL_PWREx_DisableAVD (void); /* Power PVD/AVD IRQ Handler */ -void HAL_PWREx_PVD_AVD_IRQHandler(void); -void HAL_PWREx_AVDCallback(void); +void HAL_PWREx_PVD_AVD_IRQHandler (void); +void HAL_PWREx_AVDCallback (void); /** * @} */ @@ -658,6 +682,7 @@ void HAL_PWREx_AVDCallback(void); ((STATE) == PWR_D3_DOMAIN_RUN)) /* Check wake up pin parameter */ +#if defined (PWR_WKUPEPR_WKUPEN3) #define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) ||\ ((PIN) == PWR_WAKEUP_PIN2) ||\ ((PIN) == PWR_WAKEUP_PIN3) ||\ @@ -676,6 +701,20 @@ void HAL_PWREx_AVDCallback(void); ((PIN) == PWR_WAKEUP_PIN4_LOW) ||\ ((PIN) == PWR_WAKEUP_PIN5_LOW) ||\ ((PIN) == PWR_WAKEUP_PIN6_LOW)) +#else +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) ||\ + ((PIN) == PWR_WAKEUP_PIN2) ||\ + ((PIN) == PWR_WAKEUP_PIN4) ||\ + ((PIN) == PWR_WAKEUP_PIN6) ||\ + ((PIN) == PWR_WAKEUP_PIN1_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN2_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN4_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN6_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN1_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN2_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN4_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN6_LOW)) +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ /* Check wake up pin polarity parameter */ #define IS_PWR_WAKEUP_PIN_POLARITY(POLARITY) (((POLARITY) == PWR_PIN_POLARITY_HIGH) ||\ @@ -687,6 +726,7 @@ void HAL_PWREx_AVDCallback(void); ((PULL) == PWR_PIN_PULL_DOWN)) /* Check wake up flag parameter */ +#if defined (PWR_WKUPEPR_WKUPEN3) #define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\ ((FLAG) == PWR_WAKEUP_FLAG2) ||\ ((FLAG) == PWR_WAKEUP_FLAG3) ||\ @@ -694,6 +734,13 @@ void HAL_PWREx_AVDCallback(void); ((FLAG) == PWR_WAKEUP_FLAG5) ||\ ((FLAG) == PWR_WAKEUP_FLAG6) ||\ ((FLAG) == PWR_WAKEUP_FLAG_ALL)) +#else +#define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\ + ((FLAG) == PWR_WAKEUP_FLAG2) ||\ + ((FLAG) == PWR_WAKEUP_FLAG4) ||\ + ((FLAG) == PWR_WAKEUP_FLAG6) ||\ + ((FLAG) == PWR_WAKEUP_FLAG_ALL)) +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ /* Check wake up flag parameter */ #define IS_PWR_AVD_LEVEL(LEVEL) (((LEVEL) == PWR_AVDLEVEL_0) ||\ @@ -762,4 +809,3 @@ void HAL_PWREx_AVDCallback(void); #endif /* STM32H7xx_HAL_PWR_EX_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |