summaryrefslogtreecommitdiffstats
path: root/bsps/arm/stm32h7/include/stm32h7xx_hal_i2s.h
diff options
context:
space:
mode:
Diffstat (limited to 'bsps/arm/stm32h7/include/stm32h7xx_hal_i2s.h')
-rw-r--r--bsps/arm/stm32h7/include/stm32h7xx_hal_i2s.h1295
1 files changed, 664 insertions, 631 deletions
diff --git a/bsps/arm/stm32h7/include/stm32h7xx_hal_i2s.h b/bsps/arm/stm32h7/include/stm32h7xx_hal_i2s.h
index a618418706..0ccc899c78 100644
--- a/bsps/arm/stm32h7/include/stm32h7xx_hal_i2s.h
+++ b/bsps/arm/stm32h7/include/stm32h7xx_hal_i2s.h
@@ -1,649 +1,682 @@
-/**
- ******************************************************************************
- * @file stm32h7xx_hal_i2s.h
- * @author MCD Application Team
- * @brief Header file of I2S HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32H7xx_HAL_I2S_H
-#define STM32H7xx_HAL_I2S_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32h7xx_hal_def.h"
-
-/** @addtogroup STM32H7xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup I2S
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup I2S_Exported_Types I2S Exported Types
+/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_i2s.h
+ * @author MCD Application Team
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_I2S_H
+#define STM32H7xx_HAL_I2S_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-
-/**
- * @brief I2S Init structure definition
- */
-typedef struct
-{
- uint32_t Mode; /*!< Specifies the I2S operating mode.
- This parameter can be a value of @ref I2S_Mode */
-
- uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
- This parameter can be a value of @ref I2S_Standard */
-
- uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
- This parameter can be a value of @ref I2S_Data_Format */
-
- uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
- This parameter can be a value of @ref I2S_MCLK_Output */
-
- uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
- This parameter can be a value of @ref I2S_Audio_Frequency */
-
- uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
- This parameter can be a value of @ref I2S_Clock_Polarity */
-
- uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
- This parameter can be a value of @ref I2S_MSB_LSB_transmission */
-
- uint32_t WSInversion; /*!< Control the Word Select Inversion.
- This parameter can be a value of @ref I2S_WSInversion */
-
- uint32_t Data24BitAlignment; /*!< Specifies the Data Padding for 24 bits data length
- This parameter can be a value of @ref I2S_Data_24Bit_Alignment */
-
- uint32_t MasterKeepIOState; /*!< Control of Alternate function GPIOs state
- This parameter can be a value of @ref SPI_Master_Keep_IO_State */
-
-} I2S_InitTypeDef;
-
-/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_I2S_STATE_RESET = 0x00UL, /*!< I2S not yet initialized or disabled */
- HAL_I2S_STATE_READY = 0x01UL, /*!< I2S initialized and ready for use */
- HAL_I2S_STATE_BUSY = 0x02UL, /*!< I2S internal process is ongoing */
- HAL_I2S_STATE_BUSY_TX = 0x03UL, /*!< Data Transmission process is ongoing */
- HAL_I2S_STATE_BUSY_RX = 0x04UL, /*!< Data Reception process is ongoing */
- HAL_I2S_STATE_TIMEOUT = 0x06UL, /*!< I2S timeout state */
- HAL_I2S_STATE_ERROR = 0x07UL /*!< I2S error state */
-} HAL_I2S_StateTypeDef;
-
-/**
- * @brief I2S handle Structure definition
- */
-typedef struct __I2S_HandleTypeDef
-{
- SPI_TypeDef *Instance; /*!< I2S registers base address */
-
- I2S_InitTypeDef Init; /*!< I2S communication parameters */
-
- uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */
-
- __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */
-
- __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */
-
- uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */
-
- __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */
-
- __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter
- (This field is initialized at the
- same value as transfer size at the
- beginning of the transfer and
- decremented when a sample is received
- NbSamplesReceived = RxBufferSize-RxBufferCount) */
-
- void (*RxISR)(struct __I2S_HandleTypeDef *hi2s); /*!< function pointer on Rx ISR */
-
- void (*TxISR)(struct __I2S_HandleTypeDef *hi2s); /*!< function pointer on Tx ISR */
-
- DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */
-
- DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */
-
- __IO HAL_LockTypeDef Lock; /*!< I2S locking object */
-
- __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */
-
- __IO uint32_t ErrorCode; /*!< I2S Error code
- This parameter can be a value of @ref I2S_Error */
-
-#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
- void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */
- void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */
- void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */
- void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */
- void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */
- void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */
- void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */
-
-#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
-} I2S_HandleTypeDef;
-
-#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
-/**
-
- * @brief HAL I2S Callback ID enumeration definition
- */
-typedef enum
-{
- HAL_I2S_TX_COMPLETE_CB_ID = 0x00UL, /*!< I2S Tx Completed callback ID */
- HAL_I2S_RX_COMPLETE_CB_ID = 0x01UL, /*!< I2S Rx Completed callback ID */
- HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03UL, /*!< I2S Tx Half Completed callback ID */
- HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04UL, /*!< I2S Rx Half Completed callback ID */
- HAL_I2S_ERROR_CB_ID = 0x06UL, /*!< I2S Error callback ID */
- HAL_I2S_MSPINIT_CB_ID = 0x07UL, /*!< I2S Msp Init callback ID */
- HAL_I2S_MSPDEINIT_CB_ID = 0x08UL /*!< I2S Msp DeInit callback ID */
-
-} HAL_I2S_CallbackIDTypeDef;
-
-/**
- * @brief HAL I2S Callback pointer definition
- */
-typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */
-
-#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup I2S_Exported_Constants I2S Exported Constants
+ * @{
+ */
+
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref I2S_MSB_LSB_Transmission */
+
+ uint32_t WSInversion; /*!< Control the Word Select Inversion.
+ This parameter can be a value of @ref I2S_WSInversion */
+
+ uint32_t Data24BitAlignment; /*!< Specifies the Data Padding for 24 bits data length
+ This parameter can be a value of @ref I2S_Data_24Bit_Alignment */
+
+ uint32_t MasterKeepIOState; /*!< Control of Alternate function GPIOs state
+ This parameter can be a value of @ref I2S_Master_Keep_IO_State */
+
+} I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00UL, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01UL, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02UL, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x03UL, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x04UL, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_BUSY_TX_RX = 0x05UL, /*!< Data Transmission and Reception process is ongoing */
+ HAL_I2S_STATE_TIMEOUT = 0x06UL, /*!< I2S timeout state */
+ HAL_I2S_STATE_ERROR = 0x07UL /*!< I2S error state */
+} HAL_I2S_StateTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+typedef struct __I2S_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /*!< I2S registers base address */
+
+ I2S_InitTypeDef Init; /*!< I2S communication parameters */
+
+ const uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ void (*RxISR)(struct __I2S_HandleTypeDef *hi2s); /*!< function pointer on Rx ISR */
+
+ void (*TxISR)(struct __I2S_HandleTypeDef *hi2s); /*!< function pointer on Tx ISR */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /*!< I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */
+
+ __IO uint32_t ErrorCode; /*!< I2S Error code
+ This parameter can be a value of @ref I2S_Error */
+
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+ void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */
+ void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */
+ void (* TxRxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S TxRx Completed callback */
+ void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */
+ void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */
+ void (* TxRxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S TxRx Half Completed callback */
+ void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */
+ void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */
+ void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */
+
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+} I2S_HandleTypeDef;
+
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
+/**
+
+ * @brief HAL I2S Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_I2S_TX_COMPLETE_CB_ID = 0x00UL, /*!< I2S Tx Completed callback ID */
+ HAL_I2S_RX_COMPLETE_CB_ID = 0x01UL, /*!< I2S Rx Completed callback ID */
+ HAL_I2S_TX_RX_COMPLETE_CB_ID = 0x02UL, /*!< I2S TxRx Completed callback ID */
+ HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03UL, /*!< I2S Tx Half Completed callback ID */
+ HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04UL, /*!< I2S Rx Half Completed callback ID */
+ HAL_I2S_TX_RX_HALF_COMPLETE_CB_ID = 0x05UL, /*!< I2S TxRx Half Completed callback ID */
+ HAL_I2S_ERROR_CB_ID = 0x06UL, /*!< I2S Error callback ID */
+ HAL_I2S_MSPINIT_CB_ID = 0x07UL, /*!< I2S Msp Init callback ID */
+ HAL_I2S_MSPDEINIT_CB_ID = 0x08UL /*!< I2S Msp DeInit callback ID */
+
+} HAL_I2S_CallbackIDTypeDef;
+
+/**
+ * @brief HAL I2S Callback pointer definition
+ */
+typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */
+
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-/** @defgroup I2S_Error I2S Error
+ * @{
+ */
+/** @defgroup I2S_Error I2S Error
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define HAL_I2S_ERROR_NONE (0x00000000UL) /*!< No error */
-#define HAL_I2S_ERROR_TIMEOUT (0x00000001UL) /*!< Timeout error */
-#define HAL_I2S_ERROR_OVR (0x00000002UL) /*!< OVR error */
-#define HAL_I2S_ERROR_UDR (0x00000004UL) /*!< UDR error */
-#define HAL_I2S_ERROR_DMA (0x00000008UL) /*!< DMA transfer error */
-#define HAL_I2S_ERROR_PRESCALER (0x00000010UL) /*!< Prescaler Calculation error */
-#define HAL_I2S_ERROR_FRE (0x00000020UL) /*!< FRE error */
-#define HAL_I2S_ERROR_NO_OGT (0x00000040UL) /*!< No On Going Transfer error */
-#define HAL_I2S_ERROR_NOT_SUPPORTED (0x00000080UL) /*!< Requested operation not supported */
-#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
-#define HAL_I2S_ERROR_INVALID_CALLBACK (0x00000100UL) /*!< Invalid Callback error */
-#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/** @defgroup I2S_Mode I2S Mode
+ * @{
+ */
+#define HAL_I2S_ERROR_NONE (0x00000000UL) /*!< No error */
+#define HAL_I2S_ERROR_TIMEOUT (0x00000001UL) /*!< Timeout error */
+#define HAL_I2S_ERROR_OVR (0x00000002UL) /*!< OVR error */
+#define HAL_I2S_ERROR_UDR (0x00000004UL) /*!< UDR error */
+#define HAL_I2S_ERROR_DMA (0x00000008UL) /*!< DMA transfer error */
+#define HAL_I2S_ERROR_PRESCALER (0x00000010UL) /*!< Prescaler Calculation error */
+#define HAL_I2S_ERROR_FRE (0x00000020UL) /*!< FRE error */
+#define HAL_I2S_ERROR_NO_OGT (0x00000040UL) /*!< No On Going Transfer error */
+#define HAL_I2S_ERROR_NOT_SUPPORTED (0x00000080UL) /*!< Requested operation not supported */
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
+#define HAL_I2S_ERROR_INVALID_CALLBACK (0x00000100UL) /*!< Invalid Callback error */
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode I2S Mode
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_MODE_SLAVE_TX (0x00000000UL)
-#define I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0)
-#define I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1)
-#define I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)
-#define I2S_MODE_SLAVE_FULLDUPLEX (SPI_I2SCFGR_I2SCFG_2)
-#define I2S_MODE_MASTER_FULLDUPLEX (SPI_I2SCFGR_I2SCFG_2 | SPI_I2SCFGR_I2SCFG_0)
-/**
- * @}
- */
-
-/** @defgroup I2S_Standard I2S Standard
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX (0x00000000UL)
+#define I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0)
+#define I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1)
+#define I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)
+#define I2S_MODE_SLAVE_FULLDUPLEX (SPI_I2SCFGR_I2SCFG_2)
+#define I2S_MODE_MASTER_FULLDUPLEX (SPI_I2SCFGR_I2SCFG_2 | SPI_I2SCFGR_I2SCFG_0)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard I2S Standard
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_STANDARD_PHILIPS (0x00000000UL)
-#define I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0)
-#define I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1)
-#define I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)
-#define I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)
-/**
- * @}
- */
-
-/** @defgroup I2S_Data_Format I2S Data Format
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS (0x00000000UL)
+#define I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0)
+#define I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1)
+#define I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)
+#define I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format I2S Data Format
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_DATAFORMAT_16B (0x00000000UL)
-#define I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN)
-#define I2S_DATAFORMAT_24B (SPI_I2SCFGR_DATLEN_0)
-#define I2S_DATAFORMAT_32B (SPI_I2SCFGR_DATLEN_1)
-/**
- * @}
- */
-
-/** @defgroup I2S_MCLK_Output I2S MCLK Output
+ * @{
+ */
+#define I2S_DATAFORMAT_16B (0x00000000UL)
+#define I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN)
+#define I2S_DATAFORMAT_24B (SPI_I2SCFGR_DATLEN_0)
+#define I2S_DATAFORMAT_32B (SPI_I2SCFGR_DATLEN_1)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output I2S MCLK Output
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_MCLKOUTPUT_ENABLE (SPI_I2SCFGR_MCKOE)
-#define I2S_MCLKOUTPUT_DISABLE (0x00000000UL)
-/**
- * @}
- */
-
-/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE (SPI_I2SCFGR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE (0x00000000UL)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_AUDIOFREQ_192K (192000UL)
-#define I2S_AUDIOFREQ_96K (96000UL)
-#define I2S_AUDIOFREQ_48K (48000UL)
-#define I2S_AUDIOFREQ_44K (44100UL)
-#define I2S_AUDIOFREQ_32K (32000UL)
-#define I2S_AUDIOFREQ_22K (22050UL)
-#define I2S_AUDIOFREQ_16K (16000UL)
-#define I2S_AUDIOFREQ_11K (11025UL)
-#define I2S_AUDIOFREQ_8K (8000UL)
-#define I2S_AUDIOFREQ_DEFAULT (2UL)
-/**
- * @}
- */
-
-/** @defgroup I2S_FullDuplex_Mode I2S FullDuplex Mode
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K (192000UL)
+#define I2S_AUDIOFREQ_96K (96000UL)
+#define I2S_AUDIOFREQ_48K (48000UL)
+#define I2S_AUDIOFREQ_44K (44100UL)
+#define I2S_AUDIOFREQ_32K (32000UL)
+#define I2S_AUDIOFREQ_22K (22050UL)
+#define I2S_AUDIOFREQ_16K (16000UL)
+#define I2S_AUDIOFREQ_11K (11025UL)
+#define I2S_AUDIOFREQ_8K (8000UL)
+#define I2S_AUDIOFREQ_DEFAULT (2UL)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity I2S FullDuplex Mode
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_CPOL_LOW (0x00000000UL)
-#define I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL)
-/**
- * @}
- */
-
-/** @defgroup I2S_MSB_LSB_Transmission I2S MSB LSB Transmission
+ * @{
+ */
+#define I2S_CPOL_LOW (0x00000000UL)
+#define I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MSB_LSB_Transmission I2S MSB LSB Transmission
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_FIRSTBIT_MSB (0x00000000UL)
-#define I2S_FIRSTBIT_LSB SPI_CFG2_LSBFRST
-/**
- * @}
- */
-
-/** @defgroup I2S_WSInversion I2S Word Select Inversion
+ * @{
+ */
+#define I2S_FIRSTBIT_MSB (0x00000000UL)
+#define I2S_FIRSTBIT_LSB SPI_CFG2_LSBFRST
+/**
+ * @}
+ */
+
+/** @defgroup I2S_WSInversion I2S Word Select Inversion
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_WS_INVERSION_DISABLE (0x00000000UL)
-#define I2S_WS_INVERSION_ENABLE SPI_I2SCFGR_WSINV
-/**
- * @}
- */
-
-/** @defgroup I2S_Data_24Bit_Alignment Data Padding 24Bit
+ * @{
+ */
+#define I2S_WS_INVERSION_DISABLE (0x00000000UL)
+#define I2S_WS_INVERSION_ENABLE SPI_I2SCFGR_WSINV
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_24Bit_Alignment Data Padding 24Bit
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_DATA_24BIT_ALIGNMENT_RIGHT (0x00000000UL)
-#define I2S_DATA_24BIT_ALIGNMENT_LEFT SPI_I2SCFGR_DATFMT
-/**
- * @}
- */
-
-/** @defgroup I2S_Master_Keep_IO_State Keep IO State
+ * @{
+ */
+#define I2S_DATA_24BIT_ALIGNMENT_RIGHT (0x00000000UL)
+#define I2S_DATA_24BIT_ALIGNMENT_LEFT SPI_I2SCFGR_DATFMT
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Master_Keep_IO_State Keep IO State
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_MASTER_KEEP_IO_STATE_DISABLE (0x00000000U)
-#define I2S_MASTER_KEEP_IO_STATE_ENABLE SPI_CFG2_AFCNTR
-/**
- * @}
- */
-
-/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
+ * @{
+ */
+#define I2S_MASTER_KEEP_IO_STATE_DISABLE (0x00000000U)
+#define I2S_MASTER_KEEP_IO_STATE_ENABLE SPI_CFG2_AFCNTR
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_IT_RXP SPI_IER_RXPIE
-#define I2S_IT_TXP SPI_IER_TXPIE
-#define I2S_IT_UDR SPI_IER_UDRIE
-#define I2S_IT_OVR SPI_IER_OVRIE
-#define I2S_IT_FRE SPI_IER_TIFREIE
-#define I2S_IT_ERR (SPI_IER_UDRIE | SPI_IER_OVRIE | SPI_IER_TIFREIE)
-/**
- * @}
- */
-
-/** @defgroup I2S_Flags_Definition I2S Flags Definition
+ * @{
+ */
+#define I2S_IT_RXP SPI_IER_RXPIE
+#define I2S_IT_TXP SPI_IER_TXPIE
+#define I2S_IT_DXP SPI_IER_DXPIE
+#define I2S_IT_UDR SPI_IER_UDRIE
+#define I2S_IT_OVR SPI_IER_OVRIE
+#define I2S_IT_FRE SPI_IER_TIFREIE
+#define I2S_IT_ERR (SPI_IER_UDRIE | SPI_IER_OVRIE | SPI_IER_TIFREIE)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flags_Definition I2S Flags Definition
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-#define I2S_FLAG_RXP SPI_SR_RXP /* I2S status flag : Rx-Packet available flag */
-#define I2S_FLAG_TXP SPI_SR_TXP /* I2S status flag : Tx-Packet space available flag */
-#define I2S_FLAG_UDR SPI_SR_UDR /* I2S Error flag : Underrun flag */
-#define I2S_FLAG_OVR SPI_SR_OVR /* I2S Error flag : Overrun flag */
-#define I2S_FLAG_FRE SPI_SR_TIFRE /* I2S Error flag : TI mode frame format error flag */
-
-#define I2S_FLAG_MASK (SPI_SR_RXP | SPI_SR_TXP | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_TIFRE)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup I2S_Exported_macros I2S Exported Macros
+ * @{
+ */
+#define I2S_FLAG_RXP SPI_SR_RXP /* I2S status flag : Rx-Packet available flag */
+#define I2S_FLAG_TXP SPI_SR_TXP /* I2S status flag : Tx-Packet space available flag */
+#define I2S_FLAG_DXP SPI_SR_DXP /* I2S status flag : Dx-Packet space available flag */
+#define I2S_FLAG_UDR SPI_SR_UDR /* I2S Error flag : Underrun flag */
+#define I2S_FLAG_OVR SPI_SR_OVR /* I2S Error flag : Overrun flag */
+#define I2S_FLAG_FRE SPI_SR_TIFRE /* I2S Error flag : TI mode frame format error flag */
+
+#define I2S_FLAG_MASK (SPI_SR_RXP | SPI_SR_TXP | SPI_SR_DXP |SPI_SR_UDR | SPI_SR_OVR | SPI_SR_TIFRE)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup I2S_Exported_macros I2S Exported Macros
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-
-/** @brief Reset I2S handle state
- * @param __HANDLE__ specifies the I2S Handle.
- * @retval None
- */
-#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
-#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) do{ \
- (__HANDLE__)->State = HAL_I2S_STATE_RESET; \
- (__HANDLE__)->MspInitCallback = NULL; \
- (__HANDLE__)->MspDeInitCallback = NULL; \
- } while(0)
-#else
-#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
-#endif
-
-/** @brief Enable the specified SPI peripheral (in I2S mode).
- * @param __HANDLE__ specifies the I2S Handle.
- * @retval None
- */
-#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE))
-
-/** @brief Disable the specified SPI peripheral (in I2S mode).
- * @param __HANDLE__ specifies the I2S Handle.
- * @retval None
- */
-#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE))
-
-/** @brief Enable the specified I2S interrupts.
- * @param __HANDLE__ specifies the I2S Handle.
- * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
- * @param __INTERRUPT__ specifies the interrupt source to enable or disable.
- * This parameter can be one of the following values:
- * @arg I2S_IT_RXP : Rx-Packet available interrupt
- * @arg I2S_IT_TXP : Tx-Packet space available interrupt
- * @arg I2S_IT_UDR : Underrun interrupt
- * @arg I2S_IT_OVR : Overrun interrupt
- * @arg I2S_IT_FRE : TI mode frame format error interrupt
- * @arg I2S_IT_ERR : Error interrupt enable
- * @retval None
- */
-#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
-
-/** @brief Disable the specified I2S interrupts.
- * @param __HANDLE__ specifies the I2S Handle.
- * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
- * @param __INTERRUPT__ specifies the interrupt source to enable or disable.
- * This parameter can be one of the following values:
- * @arg I2S_IT_RXP : Rx-Packet available interrupt
- * @arg I2S_IT_TXP : Tx-Packet space available interrupt
- * @arg I2S_IT_UDR : Underrun interrupt
- * @arg I2S_IT_OVR : Overrun interrupt
- * @arg I2S_IT_FRE : TI mode frame format error interrupt
- * @arg I2S_IT_ERR : Error interrupt enable
- * @retval None
- */
-#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
-
-/** @brief Check if the specified I2S interrupt source is enabled or disabled.
- * @param __HANDLE__ specifies the I2S Handle.
- * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
- * @param __INTERRUPT__ specifies the I2S interrupt source to check.
- * This parameter can be one of the following values:
- * @arg I2S_IT_RXP : Rx-Packet available interrupt
- * @arg I2S_IT_TXP : Tx-Packet space available interrupt
- * @arg I2S_IT_UDR : Underrun interrupt
- * @arg I2S_IT_OVR : Overrun interrupt
- * @arg I2S_IT_FRE : TI mode frame format error interrupt
- * @arg I2S_IT_ERR : Error interrupt enable
- * @retval The new state of __IT__ (TRUE or FALSE).
- */
-#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/** @brief Check whether the specified I2S flag is set or not.
- * @param __HANDLE__ specifies the I2S Handle.
- * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg I2S_FLAG_RXP : Rx-Packet available flag
- * @arg I2S_FLAG_TXP : Tx-Packet space available flag
- * @arg I2S_FLAG_UDR : Underrun flag
- * @arg I2S_FLAG_OVR : Overrun flag
- * @arg I2S_FLAG_FRE : TI mode frame format error flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
-
-/** @brief Clear the I2S OVR pending flag.
- * @param __HANDLE__ specifies the I2S Handle.
- * @retval None
- */
-#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_OVRC)
-
-/** @brief Clear the I2S UDR pending flag.
- * @param __HANDLE__ specifies the I2S Handle.
- * @retval None
- */
-#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_UDRC)
-
-/** @brief Clear the I2S FRE pending flag.
- * @param __HANDLE__: specifies the I2S Handle.
- * @retval None
- */
-#define __HAL_I2S_CLEAR_TIFREFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_TIFREC)
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup I2S_Exported_Functions
- * @{
- */
-
-/** @addtogroup I2S_Exported_Functions_Group1
- * @{
- */
-/* Initialization/de-initialization functions ********************************/
-HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
-HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
-
-/* Callbacks Register/UnRegister functions ***********************************/
-#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
-HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, pI2S_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID);
-#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/** @addtogroup I2S_Exported_Functions_Group2
- * @{
- */
-/* I/O operation functions ***************************************************/
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
-
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
-void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
-
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
-
-HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
-HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
-HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
-
-/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
-void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
-/**
- * @}
- */
-
-/** @addtogroup I2S_Exported_Functions_Group3
- * @{
- */
-/* Peripheral Control and State functions ************************************/
-HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
-uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup I2S_Private_Constants I2S Private Constants
+ * @{
+ */
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @retval None
+ */
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_I2S_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+
+/** @brief Enable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE))
+
+/** @brief Disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE))
+
+/** @brief Enable the specified I2S interrupts.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__ specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_RXP : Rx-Packet available interrupt
+ * @arg I2S_IT_TXP : Tx-Packet space available interrupt
+ * @arg I2S_IT_UDR : Underrun interrupt
+ * @arg I2S_IT_OVR : Overrun interrupt
+ * @arg I2S_IT_FRE : TI mode frame format error interrupt
+ * @arg I2S_IT_ERR : Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief Disable the specified I2S interrupts.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__ specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_RXP : Rx-Packet available interrupt
+ * @arg I2S_IT_TXP : Tx-Packet space available interrupt
+ * @arg I2S_IT_UDR : Underrun interrupt
+ * @arg I2S_IT_OVR : Overrun interrupt
+ * @arg I2S_IT_FRE : TI mode frame format error interrupt
+ * @arg I2S_IT_ERR : Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief Check if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__ specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_RXP : Rx-Packet available interrupt
+ * @arg I2S_IT_TXP : Tx-Packet space available interrupt
+ * @arg I2S_IT_DXP : Tx-Packet space available interrupt
+ * @arg I2S_IT_UDR : Underrun interrupt
+ * @arg I2S_IT_OVR : Overrun interrupt
+ * @arg I2S_IT_FRE : TI mode frame format error interrupt
+ * @arg I2S_IT_ERR : Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER\
+ & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified I2S flag is set or not.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXP : Rx-Packet available flag
+ * @arg I2S_FLAG_TXP : Tx-Packet space available flag
+ * @arg I2S_FLAG_UDR : Underrun flag
+ * @arg I2S_FLAG_OVR : Overrun flag
+ * @arg I2S_FLAG_FRE : TI mode frame format error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the I2S OVR pending flag.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_OVRC)
+
+/** @brief Clear the I2S UDR pending flag.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_UDRC)
+
+/** @brief Clear the I2S FRE pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_TIFREFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_TIFREC)
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
+HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID,
+ pI2S_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, const uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, const uint16_t *pTxData, uint16_t *pRxData,
+ uint16_t Size, uint32_t Timeout);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, const uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, const uint16_t *pTxData, uint16_t *pRxData,
+ uint16_t Size);
+
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, const uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, const uint16_t *pTxData, uint16_t *pRxData,
+ uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2SEx_TxRxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2SEx_TxRxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(const I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(const I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Constants I2S Private Constants
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup I2S_Private_Macros I2S Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Functions I2S Private Functions
* @ingroup RTEMSBSPsARMSTM32H7
- * @{
- */
-
-/** @brief Check whether the specified SPI flag is set or not.
- * @param __SR__ copy of I2S SR register.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg I2S_FLAG_RXP : Rx-Packet available flag
- * @arg I2S_FLAG_TXP : Tx-Packet space available flag
- * @arg I2S_FLAG_UDR : Underrun flag
- * @arg I2S_FLAG_OVR : Overrun flag
- * @arg I2S_FLAG_FRE : TI mode frame format error flag
- * @retval SET or RESET.
- */
-#define I2S_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK)) ? SET : RESET)
-
-/** @brief Check whether the specified SPI Interrupt is set or not.
- * @param __IER__ copy of I2S IER register.
- * @param __INTERRUPT__ specifies the SPI interrupt source to check.
- * This parameter can be one of the following values:
- * @arg I2S_IT_RXP : Rx-Packet available interrupt
- * @arg I2S_IT_TXP : Tx-Packet space available interrupt
- * @arg I2S_IT_UDR : Underrun interrupt
- * @arg I2S_IT_OVR : Overrun interrupt
- * @arg I2S_IT_FRE : TI mode frame format error interrupt
- * @arg I2S_IT_ERR : Error interrupt enable
- * @retval SET or RESET.
- */
-#define I2S_CHECK_IT_SOURCE(__IER__, __INTERRUPT__) ((((__IER__) & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/** @brief Checks if I2S Mode parameter is in allowed range.
- * @param __MODE__ specifies the I2S Mode.
- * This parameter can be a value of @ref I2S_Mode
- * @retval None
- */
-#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \
- ((__MODE__) == I2S_MODE_SLAVE_RX) || \
- ((__MODE__) == I2S_MODE_MASTER_TX) || \
- ((__MODE__) == I2S_MODE_MASTER_RX) || \
- ((__MODE__) == I2S_MODE_SLAVE_FULLDUPLEX) || \
- ((__MODE__) == I2S_MODE_MASTER_FULLDUPLEX))
-
-#define IS_I2S_MASTER(__MODE__) (((__MODE__) == I2S_MODE_MASTER_TX) || \
- ((__MODE__) == I2S_MODE_MASTER_RX) || \
- ((__MODE__) == I2S_MODE_MASTER_FULLDUPLEX))
-
-#define IS_I2S_SLAVE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \
- ((__MODE__) == I2S_MODE_SLAVE_RX) || \
- ((__MODE__) == I2S_MODE_SLAVE_FULLDUPLEX))
-
-#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \
- ((__STANDARD__) == I2S_STANDARD_MSB) || \
- ((__STANDARD__) == I2S_STANDARD_LSB) || \
- ((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \
- ((__STANDARD__) == I2S_STANDARD_PCM_LONG))
-
-#define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B) || \
- ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \
- ((__FORMAT__) == I2S_DATAFORMAT_24B) || \
- ((__FORMAT__) == I2S_DATAFORMAT_32B))
-
-#define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \
- ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE))
-
-#define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K) && \
- ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \
- ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT))
-
-#define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \
- ((__CPOL__) == I2S_CPOL_HIGH))
-
-#define IS_I2S_FIRST_BIT(__BIT__) (((__BIT__) == I2S_FIRSTBIT_MSB) || \
- ((__BIT__) == I2S_FIRSTBIT_LSB))
-
-#define IS_I2S_WS_INVERSION(__WSINV__) (((__WSINV__) == I2S_WS_INVERSION_DISABLE) || \
- ((__WSINV__) == I2S_WS_INVERSION_ENABLE))
-
-#define IS_I2S_DATA_24BIT_ALIGNMENT(__ALIGNMENT__) (((__ALIGNMENT__) == I2S_DATA_24BIT_ALIGNMENT_RIGHT) || \
- ((__ALIGNMENT__) == I2S_DATA_24BIT_ALIGNMENT_LEFT))
-
-#define IS_I2S_MASTER_KEEP_IO_STATE(__AFCNTR__) (((__AFCNTR__) == I2S_MASTER_KEEP_IO_STATE_DISABLE) || \
- ((__AFCNTR__) == I2S_MASTER_KEEP_IO_STATE_ENABLE))
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32H7xx_HAL_I2S_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+ * @{
+ */
+/* Private functions are defined in stm32h7xx_hal_i2S.c file */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2S_Private_Macros I2S Private Macros
+ * @ingroup RTEMSBSPsARMSTM32H7
+ * @{
+ */
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __SR__ copy of I2S SR register.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXP : Rx-Packet available flag
+ * @arg I2S_FLAG_TXP : Tx-Packet space available flag
+ * @arg I2S_FLAG_UDR : Underrun flag
+ * @arg I2S_FLAG_OVR : Overrun flag
+ * @arg I2S_FLAG_FRE : TI mode frame format error flag
+ * @retval SET or RESET.
+ */
+#define I2S_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__)\
+ & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK))\
+ ? SET : RESET)
+
+/** @brief Check whether the specified SPI Interrupt is set or not.
+ * @param __IER__ copy of I2S IER register.
+ * @param __INTERRUPT__ specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_RXP : Rx-Packet available interrupt
+ * @arg I2S_IT_TXP : Tx-Packet space available interrupt
+ * @arg I2S_IT_UDR : Underrun interrupt
+ * @arg I2S_IT_OVR : Overrun interrupt
+ * @arg I2S_IT_FRE : TI mode frame format error interrupt
+ * @arg I2S_IT_ERR : Error interrupt enable
+ * @retval SET or RESET.
+ */
+#define I2S_CHECK_IT_SOURCE(__IER__, __INTERRUPT__) ((((__IER__)\
+ & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks if I2S Mode parameter is in allowed range.
+ * @param __MODE__ specifies the I2S Mode.
+ * This parameter can be a value of @ref I2S_Mode
+ * @retval None
+ */
+#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \
+ ((__MODE__) == I2S_MODE_SLAVE_RX) || \
+ ((__MODE__) == I2S_MODE_MASTER_TX) || \
+ ((__MODE__) == I2S_MODE_MASTER_RX) || \
+ ((__MODE__) == I2S_MODE_SLAVE_FULLDUPLEX) || \
+ ((__MODE__) == I2S_MODE_MASTER_FULLDUPLEX))
+
+#define IS_I2S_MASTER(__MODE__) (((__MODE__) == I2S_MODE_MASTER_TX) || \
+ ((__MODE__) == I2S_MODE_MASTER_RX) || \
+ ((__MODE__) == I2S_MODE_MASTER_FULLDUPLEX))
+
+#define IS_I2S_SLAVE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \
+ ((__MODE__) == I2S_MODE_SLAVE_RX) || \
+ ((__MODE__) == I2S_MODE_SLAVE_FULLDUPLEX))
+
+#define IS_I2S_FULLDUPLEX(__MODE__) (((__MODE__) == I2S_MODE_MASTER_FULLDUPLEX) || \
+ ((__MODE__) == I2S_MODE_SLAVE_FULLDUPLEX))
+
+#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \
+ ((__STANDARD__) == I2S_STANDARD_MSB) || \
+ ((__STANDARD__) == I2S_STANDARD_LSB) || \
+ ((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \
+ ((__STANDARD__) == I2S_STANDARD_PCM_LONG))
+
+#define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B) || \
+ ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((__FORMAT__) == I2S_DATAFORMAT_24B) || \
+ ((__FORMAT__) == I2S_DATAFORMAT_32B))
+
+#define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE))
+
+#define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K) && \
+ ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \
+ ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT))
+
+#define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \
+ ((__CPOL__) == I2S_CPOL_HIGH))
+
+#define IS_I2S_FIRST_BIT(__BIT__) (((__BIT__) == I2S_FIRSTBIT_MSB) || \
+ ((__BIT__) == I2S_FIRSTBIT_LSB))
+
+#define IS_I2S_WS_INVERSION(__WSINV__) (((__WSINV__) == I2S_WS_INVERSION_DISABLE) || \
+ ((__WSINV__) == I2S_WS_INVERSION_ENABLE))
+
+#define IS_I2S_DATA_24BIT_ALIGNMENT(__ALIGNMENT__) (((__ALIGNMENT__) == I2S_DATA_24BIT_ALIGNMENT_RIGHT) || \
+ ((__ALIGNMENT__) == I2S_DATA_24BIT_ALIGNMENT_LEFT))
+
+#define IS_I2S_MASTER_KEEP_IO_STATE(__AFCNTR__) (((__AFCNTR__) == I2S_MASTER_KEEP_IO_STATE_DISABLE) || \
+ ((__AFCNTR__) == I2S_MASTER_KEEP_IO_STATE_ENABLE))
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_I2S_H */
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-26 06:06:01 +0000