diff options
Diffstat (limited to 'bsps/arm/stm32h7/include/stm32h7xx_hal_conf_template.h')
| -rw-r--r-- | bsps/arm/stm32h7/include/stm32h7xx_hal_conf_template.h | 63 |
1 files changed, 37 insertions, 26 deletions
diff --git a/bsps/arm/stm32h7/include/stm32h7xx_hal_conf_template.h b/bsps/arm/stm32h7/include/stm32h7xx_hal_conf_template.h index 70d54f876c..402bed67a6 100644 --- a/bsps/arm/stm32h7/include/stm32h7xx_hal_conf_template.h +++ b/bsps/arm/stm32h7/include/stm32h7xx_hal_conf_template.h @@ -8,13 +8,12 @@ ****************************************************************************** * @attention * - * <h2><center>© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -38,6 +37,7 @@ #define HAL_ADC_MODULE_ENABLED #define HAL_CEC_MODULE_ENABLED #define HAL_COMP_MODULE_ENABLED +#define HAL_CORDIC_MODULE_ENABLED #define HAL_CORTEX_MODULE_ENABLED #define HAL_CRC_MODULE_ENABLED #define HAL_CRYP_MODULE_ENABLED @@ -53,6 +53,7 @@ #define HAL_FDCAN_MODULE_ENABLED #define HAL_FLASH_MODULE_ENABLED #define HAL_GFXMMU_MODULE_ENABLED +#define HAL_FMAC_MODULE_ENABLED #define HAL_GPIO_MODULE_ENABLED #define HAL_HASH_MODULE_ENABLED #define HAL_HCD_MODULE_ENABLED @@ -102,11 +103,11 @@ * (when HSE is used as system clock source, directly or through the PLL). */ #if !defined (HSE_VALUE) -#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#define HSE_VALUE (25000000UL) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ #if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ + #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ #endif /* HSE_STARTUP_TIMEOUT */ /** @@ -114,7 +115,7 @@ * This value is the default CSI value after Reset. */ #if !defined (CSI_VALUE) - #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ + #define CSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/ #endif /* CSI_VALUE */ /** @@ -123,7 +124,7 @@ * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ + #define HSI_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** @@ -131,16 +132,16 @@ * This value is used by the UART, RTC HAL module to compute the system frequency */ #if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ + #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ #endif /* LSE_VALUE */ #if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ + #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ #if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ + #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.*/ @@ -151,7 +152,7 @@ * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ + #define EXTERNAL_CLOCK_VALUE 12288000UL /*!< Value of the External clock in Hz*/ #endif /* EXTERNAL_CLOCK_VALUE */ /* Tip: To avoid modifying this file each time you need to use different HSE, @@ -161,15 +162,16 @@ /** * @brief This is the HAL system configuration section */ -#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (0x0FUL) /*!< tick interrupt priority */ #define USE_RTOS 0 -#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ +#define USE_SD_TRANSCEIVER 0U /*!< use uSD Transceiver */ #define USE_SPI_CRC 1U /*!< use CRC in SPI */ #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ #define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ #define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */ #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ #define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ #define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ @@ -179,6 +181,7 @@ #define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */ #define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */ #define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ #define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ #define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ @@ -215,15 +218,15 @@ #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ /* ########################### Ethernet Configuration ######################### */ -#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ -#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ +#define ETH_TX_DESC_CNT 4U /* number of Ethernet Tx DMA descriptors */ +#define ETH_RX_DESC_CNT 4U /* number of Ethernet Rx DMA descriptors */ -#define ETH_MAC_ADDR0 ((uint8_t)0x02) -#define ETH_MAC_ADDR1 ((uint8_t)0x00) -#define ETH_MAC_ADDR2 ((uint8_t)0x00) -#define ETH_MAC_ADDR3 ((uint8_t)0x00) -#define ETH_MAC_ADDR4 ((uint8_t)0x00) -#define ETH_MAC_ADDR5 ((uint8_t)0x00) +#define ETH_MAC_ADDR0 (0x02UL) +#define ETH_MAC_ADDR1 (0x00UL) +#define ETH_MAC_ADDR2 (0x00UL) +#define ETH_MAC_ADDR3 (0x00UL) +#define ETH_MAC_ADDR4 (0x00UL) +#define ETH_MAC_ADDR5 (0x00UL) /* ########################## Assert Selection ############################## */ /** @@ -306,6 +309,10 @@ #include "stm32h7xx_hal_comp.h" #endif /* HAL_COMP_MODULE_ENABLED */ +#ifdef HAL_CORDIC_MODULE_ENABLED + #include "stm32h7xx_hal_cordic.h" +#endif /* HAL_CORDIC_MODULE_ENABLED */ + #ifdef HAL_CRC_MODULE_ENABLED #include "stm32h7xx_hal_crc.h" #endif /* HAL_CRC_MODULE_ENABLED */ @@ -326,6 +333,10 @@ #include "stm32h7xx_hal_gfxmmu.h" #endif /* HAL_GFXMMU_MODULE_ENABLED */ +#ifdef HAL_FMAC_MODULE_ENABLED + #include "stm32h7xx_hal_fmac.h" +#endif /* HAL_FMAC_MODULE_ENABLED */ + #ifdef HAL_HRTIM_MODULE_ENABLED #include "stm32h7xx_hal_hrtim.h" #endif /* HAL_HRTIM_MODULE_ENABLED */ @@ -498,4 +509,4 @@ #endif /* STM32H7xx_HAL_CONF_H */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + |