diff options
Diffstat (limited to 'bsps/arm/stm32h7/hal/stm32h7xx_hal_timebase_rtc_alarm_template.c')
-rw-r--r-- | bsps/arm/stm32h7/hal/stm32h7xx_hal_timebase_rtc_alarm_template.c | 348 |
1 files changed, 348 insertions, 0 deletions
diff --git a/bsps/arm/stm32h7/hal/stm32h7xx_hal_timebase_rtc_alarm_template.c b/bsps/arm/stm32h7/hal/stm32h7xx_hal_timebase_rtc_alarm_template.c new file mode 100644 index 0000000000..e4dac2af52 --- /dev/null +++ b/bsps/arm/stm32h7/hal/stm32h7xx_hal_timebase_rtc_alarm_template.c @@ -0,0 +1,348 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_timebase_rtc_alarm_template.c + * @author MCD Application Team + * @brief HAL time base based on the hardware RTC_ALARM Template. + * + * This file override the native HAL time base functions (defined as weak) + * to use the RTC ALARM for time base generation: + * + Initializes the RTC peripheral to increment the seconds registers each 1ms + * + The alarm is configured to assert an interrupt when the RTC reaches 1ms + * + HAL_IncTick is called at each Alarm event and the time is reset to 00:00:00 + * + HSE (default), LSE or LSI can be selected as RTC clock source + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This file must be copied to the application folder and modified as follows: + (#) Rename it to 'stm32h7xx_hal_timebase_rtc_alarm.c' + (#) Add this file and the RTC HAL drivers to your project and uncomment + HAL_RTC_MODULE_ENABLED define in stm32h7xx_hal_conf.h + + [..] + (@) HAL RTC alarm and HAL RTC wakeup drivers can not be used with low power modes: + The wake up capability of the RTC may be intrusive in case of prior low power mode + configuration requiring different wake up sources. + Application/Example behavior is no more guaranteed + (@) The stm32h7xx_hal_timebase_tim use is recommended for the Applications/Examples + requiring low power modes + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL_TimeBase_RTC_Alarm_Template HAL TimeBase RTC Alarm Template + * @ingroup RTEMSBSPsARMSTM32H7 + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Uncomment the line below to select the appropriate RTC Clock source for your application: + + RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision. + + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing + precision. + + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing + precision. + */ +#define RTC_CLOCK_SOURCE_HSE +/* #define RTC_CLOCK_SOURCE_LSE */ +/* #define RTC_CLOCK_SOURCE_LSI */ + +#ifdef RTC_CLOCK_SOURCE_HSE + #define RTC_ASYNCH_PREDIV 99U + #define RTC_SYNCH_PREDIV 9U + #define RCC_RTCCLKSOURCE_1MHZ ((uint32_t)((uint32_t)RCC_BDCR_RTCSEL | (uint32_t)((HSE_VALUE/1000000U) << 12U))) +#else /* RTC_CLOCK_SOURCE_LSE || RTC_CLOCK_SOURCE_LSI */ + #define RTC_ASYNCH_PREDIV 0U + #define RTC_SYNCH_PREDIV 31U +#endif /* RTC_CLOCK_SOURCE_HSE */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +static RTC_HandleTypeDef hRTC_Handle; +/* Private function prototypes -----------------------------------------------*/ +void RTC_Alarm_IRQHandler(void); +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the RTC_ALARMA as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + __IO uint32_t counter = 0U; + + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + HAL_StatusTypeDef status; + +#ifdef RTC_CLOCK_SOURCE_LSE + /* Configure LSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; +#elif defined (RTC_CLOCK_SOURCE_LSI) + /* Configure LSI as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; +#elif defined (RTC_CLOCK_SOURCE_HSE) + /* Configure HSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + /* Ensure that RTC is clocked by 1MHz */ + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_1MHZ; +#else +#error Please select the RTC Clock source +#endif /* RTC_CLOCK_SOURCE_LSE */ + + status = HAL_RCC_OscConfig(&RCC_OscInitStruct); + if (status == HAL_OK) + { + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; + status = HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + } + if (status == HAL_OK) + { + /* Enable RTC Clock */ + __HAL_RCC_RTC_ENABLE(); + /* The time base should be 1ms + Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK + HSE as RTC clock + Time base = ((99 + 1) * (9 + 1)) / 1MHz + = 1ms + LSE as RTC clock + Time base = ((31 + 1) * (0 + 1)) / 32.768KHz + = ~1ms + LSI as RTC clock + Time base = ((31 + 1) * (0 + 1)) / 32KHz + = 1ms + */ + hRTC_Handle.Instance = RTC; + hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; + hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; + hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; + hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; + hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; + status = HAL_RTC_Init(&hRTC_Handle); + } + if (status == HAL_OK) + { + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + + /* Disable the Alarm A interrupt */ + __HAL_RTC_ALARMA_DISABLE(&hRTC_Handle); + + /* Clear flag alarm A */ + __HAL_RTC_ALARM_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_ALRAF); + + counter = 0U; + /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ +#if defined(RTC_ICSR_ALRAWF) + while ( READ_BIT(hRTC_Handle.Instance->ICSR, RTC_FLAG_ALRAWF) == (uint32_t)RESET) +#else + while (__HAL_RTC_ALARM_GET_FLAG(&hRTC_Handle, RTC_FLAG_ALRAWF) == (uint32_t)RESET) +#endif /* RTC_ICSR_ALRAWF */ + { + if (counter++ == (SystemCoreClock / 48U)) /* Timeout = ~ 1s */ + { + status = HAL_ERROR; + } + } + } + if (status == HAL_OK) + { + hRTC_Handle.Instance->ALRMAR = (uint32_t)0x01U; + + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMA_ENABLE(&hRTC_Handle); + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + + /* RTC Alarm Interrupt Configuration: EXTI configuration */ + __HAL_RTC_ALARM_EXTI_ENABLE_IT(); + __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); + + /* Check if the Initialization mode is set */ +#if defined(RTC_ISR_INITF) + if ((hRTC_Handle.Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET) +#else + if ((hRTC_Handle.Instance->ICSR & RTC_ICSR_INITF) == (uint32_t)RESET) +#endif /* RTC_ISR_INITF */ + { + /* Set the Initialization mode */ +#if defined(RTC_ISR_INITF) + hRTC_Handle.Instance->ISR = (uint32_t)RTC_INIT_MASK; +#else + hRTC_Handle.Instance->ICSR = (uint32_t)RTC_INIT_MASK; +#endif /* RTC_ISR_INITF */ + counter = 0U; +#if defined(RTC_ISR_INITF) + while ((hRTC_Handle.Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET) +#else + while ((hRTC_Handle.Instance->ICSR & RTC_ICSR_INITF) == (uint32_t)RESET) +#endif /* RTC_ISR_INITF */ + { + if (counter++ == (SystemCoreClock / 48U)) /* Timeout = ~ 1s */ + { + status = HAL_ERROR; + } + } + } + } + if (status == HAL_OK) + { + hRTC_Handle.Instance->DR = 0U; + hRTC_Handle.Instance->TR = 0U; + +#if defined(RTC_ISR_INIT) + hRTC_Handle.Instance->ISR &= (uint32_t)~RTC_ISR_INIT; +#else + hRTC_Handle.Instance->ICSR &= (uint32_t)~RTC_ICSR_INIT; +#endif /* RTC_ISR_INIT */ + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); + + /* Enable the RTC Alarm Interrupt */ + HAL_NVIC_EnableIRQ(RTC_Alarm_IRQn); + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(RTC_Alarm_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + + } + return status; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling RTC ALARM interrupt. + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Disable RTC ALARM update Interrupt */ + __HAL_RTC_ALARM_DISABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by Enabling RTC ALARM interrupt. + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Enable RTC ALARM Update interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief ALARM A Event Callback in non blocking mode + * @note This function is called when RTC_ALARM interrupt took place, inside + * RTC_ALARM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) +{ + __IO uint32_t counter = 0U; + + HAL_IncTick(); + + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set the Initialization mode */ +#if defined(RTC_ISR_INIT) + hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK; + + while((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET) +#else + hrtc->Instance->ICSR = (uint32_t)RTC_INIT_MASK; + + while((hrtc->Instance->ICSR & RTC_ICSR_INITF) == (uint32_t)RESET) +#endif /* RTC_ISR_INIT */ + { + if(counter++ == (SystemCoreClock /48U)) /* Timeout = ~ 1s */ + { + break; + } + } + + hrtc->Instance->DR = 0U; + hrtc->Instance->TR = 0U; +#if defined(RTC_ISR_INIT) + hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; +#else + hrtc->Instance->ICSR &= (uint32_t)~RTC_ICSR_INIT; +#endif /* RTC_ISR_INIT */ + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief This function handles RTC ALARM interrupt request. + * @retval None + */ +void RTC_Alarm_IRQHandler(void) +{ + HAL_RTC_AlarmIRQHandler(&hRTC_Handle); +} + +/** + * @} + */ + +/** + * @} + */ + + |