diff options
Diffstat (limited to 'bsps/arm/stm32h7/hal/stm32h7xx_hal_spdifrx.c')
-rw-r--r-- | bsps/arm/stm32h7/hal/stm32h7xx_hal_spdifrx.c | 3274 |
1 files changed, 1639 insertions, 1635 deletions
diff --git a/bsps/arm/stm32h7/hal/stm32h7xx_hal_spdifrx.c b/bsps/arm/stm32h7/hal/stm32h7xx_hal_spdifrx.c index ee70305525..a689ea1f06 100644 --- a/bsps/arm/stm32h7/hal/stm32h7xx_hal_spdifrx.c +++ b/bsps/arm/stm32h7/hal/stm32h7xx_hal_spdifrx.c @@ -1,1640 +1,1644 @@ -/**
- ******************************************************************************
- * @file stm32h7xx_hal_spdifrx.c
- * @author MCD Application Team
- * @brief This file provides firmware functions to manage the following
- * functionalities of the SPDIFRX audio interface:
- * + Initialization and Configuration
- * + Data transfers functions
- * + DMA transfers management
- * + Interrupts and flags management
- @verbatim
- ===============================================================================
- ##### How to use this driver #####
- ===============================================================================
- [..]
- The SPDIFRX HAL driver can be used as follow:
-
- (#) Declare SPDIFRX_HandleTypeDef handle structure.
- (#) Initialize the SPDIFRX low level resources by implement the HAL_SPDIFRX_MspInit() API:
- (##) Enable the SPDIFRX interface clock.
- (##) SPDIFRX pins configuration:
- (+++) Enable the clock for the SPDIFRX GPIOs.
- (+++) Configure these SPDIFRX pins as alternate function pull-up.
- (##) NVIC configuration if you need to use interrupt process (HAL_SPDIFRX_ReceiveCtrlFlow_IT() and HAL_SPDIFRX_ReceiveDataFlow_IT() API's).
- (+++) Configure the SPDIFRX interrupt priority.
- (+++) Enable the NVIC SPDIFRX IRQ handle.
- (##) DMA Configuration if you need to use DMA process (HAL_SPDIFRX_ReceiveDataFlow_DMA() and HAL_SPDIFRX_ReceiveCtrlFlow_DMA() API's).
- (+++) Declare a DMA handle structure for the reception of the Data Flow channel.
- (+++) Declare a DMA handle structure for the reception of the Control Flow channel.
- (+++) Enable the DMAx interface clock.
- (+++) Configure the declared DMA handle structure CtrlRx/DataRx with the required parameters.
- (+++) Configure the DMA Channel.
- (+++) Associate the initialized DMA handle to the SPDIFRX DMA CtrlRx/DataRx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
- DMA CtrlRx/DataRx channel.
-
- (#) Program the input selection, re-tries number, wait for activity, channel status selection, data format, stereo mode and masking of user bits
- using HAL_SPDIFRX_Init() function.
-
- -@- The specific SPDIFRX interrupts (RXNE/CSRNE and Error Interrupts) will be managed using the macros
- __SPDIFRX_ENABLE_IT() and __SPDIFRX_DISABLE_IT() inside the receive process.
- -@- Make sure that ck_spdif clock is configured.
-
- (#) Three operation modes are available within this driver :
-
- *** Polling mode for reception operation (for debug purpose) ***
- ================================================================
- [..]
- (+) Receive data flow in blocking mode using HAL_SPDIFRX_ReceiveDataFlow()
- (+) Receive control flow of data in blocking mode using HAL_SPDIFRX_ReceiveCtrlFlow()
-
- *** Interrupt mode for reception operation ***
- =========================================
- [..]
- (+) Receive an amount of data (Data Flow) in non blocking mode using HAL_SPDIFRX_ReceiveDataFlow_IT()
- (+) Receive an amount of data (Control Flow) in non blocking mode using HAL_SPDIFRX_ReceiveCtrlFlow_IT()
- (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
- (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
- (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
-
- *** DMA mode for reception operation ***
- ========================================
- [..]
- (+) Receive an amount of data (Data Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveDataFlow_DMA()
- (+) Receive an amount of data (Control Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveCtrlFlow_DMA()
- (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
- (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
- (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
- (+) Stop the DMA Transfer using HAL_SPDIFRX_DMAStop()
-
- *** SPDIFRX HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in SPDIFRX HAL driver.
- (+) __HAL_SPDIFRX_IDLE: Disable the specified SPDIFRX peripheral (IDEL State)
- (+) __HAL_SPDIFRX_SYNC: Enable the synchronization state of the specified SPDIFRX peripheral (SYNC State)
- (+) __HAL_SPDIFRX_RCV: Enable the receive state of the specified SPDIFRX peripheral (RCV State)
- (+) __HAL_SPDIFRX_ENABLE_IT : Enable the specified SPDIFRX interrupts
- (+) __HAL_SPDIFRX_DISABLE_IT : Disable the specified SPDIFRX interrupts
- (+) __HAL_SPDIFRX_GET_FLAG: Check whether the specified SPDIFRX flag is set or not.
-
- [..]
- (@) You can refer to the SPDIFRX HAL driver header file for more useful macros
-
- *** Callback registration ***
- =============================================
-
- The compilation define USE_HAL_SPDIFRX_REGISTER_CALLBACKS when set to 1
- allows the user to configure dynamically the driver callbacks.
- Use HAL_SPDIFRX_RegisterCallback() funtion to register an interrupt callback.
-
- The HAL_SPDIFRX_RegisterCallback() function allows to register the following callbacks:
- (+) RxHalfCpltCallback : SPDIFRX Data flow half completed callback.
- (+) RxCpltCallback : SPDIFRX Data flow completed callback.
- (+) CxHalfCpltCallback : SPDIFRX Control flow half completed callback.
- (+) CxCpltCallback : SPDIFRX Control flow completed callback.
- (+) ErrorCallback : SPDIFRX error callback.
- (+) MspInitCallback : SPDIFRX MspInit.
- (+) MspDeInitCallback : SPDIFRX MspDeInit.
- This function takes as parameters the HAL peripheral handle, the Callback ID
- and a pointer to the user callback function.
-
- Use HAL_SPDIFRX_UnRegisterCallback() function to reset a callback to the default
- weak function.
- The HAL_SPDIFRX_UnRegisterCallback() function takes as parameters the HAL peripheral handle,
- and the Callback ID.
- This function allows to reset the following callbacks:
- (+) RxHalfCpltCallback : SPDIFRX Data flow half completed callback.
- (+) RxCpltCallback : SPDIFRX Data flow completed callback.
- (+) CxHalfCpltCallback : SPDIFRX Control flow half completed callback.
- (+) CxCpltCallback : SPDIFRX Control flow completed callback.
- (+) ErrorCallback : SPDIFRX error callback.
- (+) MspInitCallback : SPDIFRX MspInit.
- (+) MspDeInitCallback : SPDIFRX MspDeInit.
-
- By default, after the HAL_SPDIFRX_Init() and when the state is HAL_SPDIFRX_STATE_RESET
- all callbacks are set to the corresponding weak functions :
- HAL_SPDIFRX_RxHalfCpltCallback() , HAL_SPDIFRX_RxCpltCallback(), HAL_SPDIFRX_CxHalfCpltCallback(),
- HAL_SPDIFRX_CxCpltCallback() and HAL_SPDIFRX_ErrorCallback()
- Exception done for MspInit and MspDeInit functions that are
- reset to the legacy weak function in the HAL_SPDIFRX_Init()/ HAL_SPDIFRX_DeInit() only when
- these callbacks pointers are NULL (not registered beforehand).
- If not, MspInit or MspDeInit callbacks pointers are not null, the HAL_SPDIFRX_Init() / HAL_SPDIFRX_DeInit()
- keep and use the user MspInit/MspDeInit functions (registered beforehand)
-
- Callbacks can be registered/unregistered in HAL_SPDIFRX_STATE_READY state only.
- Exception done MspInit/MspDeInit callbacks that can be registered/unregistered
- in HAL_SPDIFRX_STATE_READY or HAL_SPDIFRX_STATE_RESET state,
- thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
- In that case first register the MspInit/MspDeInit user callbacks
- using HAL_SPDIFRX_RegisterCallback() before calling HAL_SPDIFRX_DeInit()
- or HAL_SPDIFRX_Init() function.
-
- When The compilation define USE_HAL_SPDIFRX_REGISTER_CALLBACKS is set to 0 or
- not defined, the callback registration feature is not available and all callbacks
- are set to the corresponding weak functions.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2017 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32h7xx_hal.h"
-
-/** @addtogroup STM32H7xx_HAL_Driver
- * @{
- */
-
-/** @defgroup SPDIFRX SPDIFRX
+/** + ****************************************************************************** + * @file stm32h7xx_hal_spdifrx.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the SPDIFRX audio interface: + * + Initialization and Configuration + * + Data transfers functions + * + DMA transfers management + * + Interrupts and flags management + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The SPDIFRX HAL driver can be used as follow: + + (#) Declare SPDIFRX_HandleTypeDef handle structure. + (#) Initialize the SPDIFRX low level resources by implement the HAL_SPDIFRX_MspInit() API: + (##) Enable the SPDIFRX interface clock. + (##) SPDIFRX pins configuration: + (+++) Enable the clock for the SPDIFRX GPIOs. + (+++) Configure these SPDIFRX pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_SPDIFRX_ReceiveCtrlFlow_IT() and HAL_SPDIFRX_ReceiveDataFlow_IT() API's). + (+++) Configure the SPDIFRX interrupt priority. + (+++) Enable the NVIC SPDIFRX IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_SPDIFRX_ReceiveDataFlow_DMA() and HAL_SPDIFRX_ReceiveCtrlFlow_DMA() API's). + (+++) Declare a DMA handle structure for the reception of the Data Flow channel. + (+++) Declare a DMA handle structure for the reception of the Control Flow channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure CtrlRx/DataRx with the required parameters. + (+++) Configure the DMA Channel. + (+++) Associate the initialized DMA handle to the SPDIFRX DMA CtrlRx/DataRx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the + DMA CtrlRx/DataRx channel. + + (#) Program the input selection, re-tries number, wait for activity, channel status selection, data format, stereo mode and masking of user bits + using HAL_SPDIFRX_Init() function. + + -@- The specific SPDIFRX interrupts (RXNE/CSRNE and Error Interrupts) will be managed using the macros + __SPDIFRX_ENABLE_IT() and __SPDIFRX_DISABLE_IT() inside the receive process. + -@- Make sure that ck_spdif clock is configured. + + (#) Three operation modes are available within this driver : + + *** Polling mode for reception operation (for debug purpose) *** + ================================================================ + [..] + (+) Receive data flow in blocking mode using HAL_SPDIFRX_ReceiveDataFlow() + (+) Receive control flow of data in blocking mode using HAL_SPDIFRX_ReceiveCtrlFlow() + + *** Interrupt mode for reception operation *** + ========================================= + [..] + (+) Receive an amount of data (Data Flow) in non blocking mode using HAL_SPDIFRX_ReceiveDataFlow_IT() + (+) Receive an amount of data (Control Flow) in non blocking mode using HAL_SPDIFRX_ReceiveCtrlFlow_IT() + (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback + (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback + (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback + + *** DMA mode for reception operation *** + ======================================== + [..] + (+) Receive an amount of data (Data Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveDataFlow_DMA() + (+) Receive an amount of data (Control Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveCtrlFlow_DMA() + (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback + (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback + (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback + (+) Stop the DMA Transfer using HAL_SPDIFRX_DMAStop() + + *** SPDIFRX HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in SPDIFRX HAL driver. + (+) __HAL_SPDIFRX_IDLE: Disable the specified SPDIFRX peripheral (IDEL State) + (+) __HAL_SPDIFRX_SYNC: Enable the synchronization state of the specified SPDIFRX peripheral (SYNC State) + (+) __HAL_SPDIFRX_RCV: Enable the receive state of the specified SPDIFRX peripheral (RCV State) + (+) __HAL_SPDIFRX_ENABLE_IT : Enable the specified SPDIFRX interrupts + (+) __HAL_SPDIFRX_DISABLE_IT : Disable the specified SPDIFRX interrupts + (+) __HAL_SPDIFRX_GET_FLAG: Check whether the specified SPDIFRX flag is set or not. + + [..] + (@) You can refer to the SPDIFRX HAL driver header file for more useful macros + + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_SPDIFRX_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use HAL_SPDIFRX_RegisterCallback() function to register an interrupt callback. + + The HAL_SPDIFRX_RegisterCallback() function allows to register the following callbacks: + (+) RxHalfCpltCallback : SPDIFRX Data flow half completed callback. + (+) RxCpltCallback : SPDIFRX Data flow completed callback. + (+) CxHalfCpltCallback : SPDIFRX Control flow half completed callback. + (+) CxCpltCallback : SPDIFRX Control flow completed callback. + (+) ErrorCallback : SPDIFRX error callback. + (+) MspInitCallback : SPDIFRX MspInit. + (+) MspDeInitCallback : SPDIFRX MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use HAL_SPDIFRX_UnRegisterCallback() function to reset a callback to the default + weak function. + The HAL_SPDIFRX_UnRegisterCallback() function takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset the following callbacks: + (+) RxHalfCpltCallback : SPDIFRX Data flow half completed callback. + (+) RxCpltCallback : SPDIFRX Data flow completed callback. + (+) CxHalfCpltCallback : SPDIFRX Control flow half completed callback. + (+) CxCpltCallback : SPDIFRX Control flow completed callback. + (+) ErrorCallback : SPDIFRX error callback. + (+) MspInitCallback : SPDIFRX MspInit. + (+) MspDeInitCallback : SPDIFRX MspDeInit. + + By default, after the HAL_SPDIFRX_Init() and when the state is HAL_SPDIFRX_STATE_RESET + all callbacks are set to the corresponding weak functions : + HAL_SPDIFRX_RxHalfCpltCallback() , HAL_SPDIFRX_RxCpltCallback(), HAL_SPDIFRX_CxHalfCpltCallback(), + HAL_SPDIFRX_CxCpltCallback() and HAL_SPDIFRX_ErrorCallback() + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_SPDIFRX_Init()/ HAL_SPDIFRX_DeInit() only when + these callbacks pointers are NULL (not registered beforehand). + If not, MspInit or MspDeInit callbacks pointers are not null, the HAL_SPDIFRX_Init() / HAL_SPDIFRX_DeInit() + keep and use the user MspInit/MspDeInit functions (registered beforehand) + + Callbacks can be registered/unregistered in HAL_SPDIFRX_STATE_READY state only. + Exception done MspInit/MspDeInit callbacks that can be registered/unregistered + in HAL_SPDIFRX_STATE_READY or HAL_SPDIFRX_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SPDIFRX_RegisterCallback() before calling HAL_SPDIFRX_DeInit() + or HAL_SPDIFRX_Init() function. + + When The compilation define USE_HAL_SPDIFRX_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup SPDIFRX SPDIFRX * @ingroup RTEMSBSPsARMSTM32H7 - * @brief SPDIFRX HAL module driver
- * @{
- */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
-#if defined (SPDIFRX)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define SPDIFRX_TIMEOUT_VALUE 0xFFFFU
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup SPDIFRX_Private_Functions
- * @{
- */
-static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma);
-static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
-static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma);
-static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma);
-static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma);
-static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
-static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
-static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t tickstart);
-/**
- * @}
- */
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup SPDIFRX_Exported_Functions SPDIFRX Exported Functions
+ * @brief SPDIFRX HAL module driver + * @{ + */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED +#if defined (SPDIFRX) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define SPDIFRX_TIMEOUT_VALUE 0xFFFFU + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SPDIFRX_Private_Functions + * @{ + */ +static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma); +static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma); +static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma); +static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma); +static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif); +static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif); +static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, + FlagStatus Status, uint32_t Timeout, uint32_t tickstart); +/** + * @} + */ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup SPDIFRX_Exported_Functions SPDIFRX Exported Functions * @ingroup RTEMSBSPsARMSTM32H7 - * @{
- */
-
-/** @defgroup SPDIFRX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{ + */ + +/** @defgroup SPDIFRX_Exported_Functions_Group1 Initialization and de-initialization functions * @ingroup RTEMSBSPsARMSTM32H7 - * @brief Initialization and Configuration functions
- *
- @verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This subsection provides a set of functions allowing to initialize and
- de-initialize the SPDIFRX peripheral:
-
- (+) User must Implement HAL_SPDIFRX_MspInit() function in which he configures
- all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
-
- (+) Call the function HAL_SPDIFRX_Init() to configure the SPDIFRX peripheral with
- the selected configuration:
- (++) Input Selection (IN0, IN1,...)
- (++) Maximum allowed re-tries during synchronization phase
- (++) Wait for activity on SPDIF selected input
- (++) Channel status selection (from channel A or B)
- (++) Data format (LSB, MSB, ...)
- (++) Stereo mode
- (++) User bits masking (PT,C,U,V,...)
-
- (+) Call the function HAL_SPDIFRX_DeInit() to restore the default configuration
- of the selected SPDIFRXx peripheral.
- @endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the SPDIFRX according to the specified parameters
- * in the SPDIFRX_InitTypeDef and create the associated handle.
- * @param hspdif SPDIFRX handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif)
-{
- uint32_t tmpreg;
-
- /* Check the SPDIFRX handle allocation */
- if(hspdif == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the SPDIFRX parameters */
- assert_param(IS_STEREO_MODE(hspdif->Init.StereoMode));
- assert_param(IS_SPDIFRX_INPUT_SELECT(hspdif->Init.InputSelection));
- assert_param(IS_SPDIFRX_MAX_RETRIES(hspdif->Init.Retries));
- assert_param(IS_SPDIFRX_WAIT_FOR_ACTIVITY(hspdif->Init.WaitForActivity));
- assert_param(IS_SPDIFRX_CHANNEL(hspdif->Init.ChannelSelection));
- assert_param(IS_SPDIFRX_DATA_FORMAT(hspdif->Init.DataFormat));
- assert_param(IS_PREAMBLE_TYPE_MASK(hspdif->Init.PreambleTypeMask));
- assert_param(IS_CHANNEL_STATUS_MASK(hspdif->Init.ChannelStatusMask));
- assert_param(IS_VALIDITY_MASK(hspdif->Init.ValidityBitMask));
- assert_param(IS_PARITY_ERROR_MASK(hspdif->Init.ParityErrorMask));
- assert_param(IS_SYMBOL_CLOCK_GEN(hspdif->Init.SymbolClockGen));
- assert_param(IS_SYMBOL_CLOCK_GEN(hspdif->Init.BackupSymbolClockGen));
-
-#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
- if(hspdif->State == HAL_SPDIFRX_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hspdif->Lock = HAL_UNLOCKED;
-
- hspdif->RxHalfCpltCallback = HAL_SPDIFRX_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
- hspdif->RxCpltCallback = HAL_SPDIFRX_RxCpltCallback; /* Legacy weak RxCpltCallback */
- hspdif->CxHalfCpltCallback = HAL_SPDIFRX_CxHalfCpltCallback; /* Legacy weak CxHalfCpltCallback */
- hspdif->CxCpltCallback = HAL_SPDIFRX_CxCpltCallback; /* Legacy weak CxCpltCallback */
- hspdif->ErrorCallback = HAL_SPDIFRX_ErrorCallback; /* Legacy weak ErrorCallback */
-
- if(hspdif->MspInitCallback == NULL)
- {
- hspdif->MspInitCallback = HAL_SPDIFRX_MspInit; /* Legacy weak MspInit */
- }
-
- /* Init the low level hardware */
- hspdif->MspInitCallback(hspdif);
- }
-#else
- if(hspdif->State == HAL_SPDIFRX_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hspdif->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
- HAL_SPDIFRX_MspInit(hspdif);
- }
-#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
-
- /* SPDIFRX peripheral state is BUSY */
- hspdif->State = HAL_SPDIFRX_STATE_BUSY;
-
- /* Disable SPDIFRX interface (IDLE State) */
- __HAL_SPDIFRX_IDLE(hspdif);
-
- /* Reset the old SPDIFRX CR configuration */
- tmpreg = hspdif->Instance->CR;
-
- tmpreg &= ~(SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK |
- SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK |
- SPDIFRX_CR_CHSEL | SPDIFRX_CR_NBTR | SPDIFRX_CR_WFA |
- SPDIFRX_CR_CKSEN | SPDIFRX_CR_CKSBKPEN |
- SPDIFRX_CR_INSEL);
-
- /* Sets the new configuration of the SPDIFRX peripheral */
- tmpreg |= (hspdif->Init.StereoMode |
- hspdif->Init.InputSelection |
- hspdif->Init.Retries |
- hspdif->Init.WaitForActivity |
- hspdif->Init.ChannelSelection |
- hspdif->Init.DataFormat |
- hspdif->Init.PreambleTypeMask |
- hspdif->Init.ChannelStatusMask |
- hspdif->Init.ValidityBitMask |
- hspdif->Init.ParityErrorMask
- );
-
- if(hspdif->Init.SymbolClockGen == ENABLE)
- {
- tmpreg |= SPDIFRX_CR_CKSEN;
- }
-
- if(hspdif->Init.BackupSymbolClockGen == ENABLE)
- {
- tmpreg |= SPDIFRX_CR_CKSBKPEN;
- }
-
- hspdif->Instance->CR = tmpreg;
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
-
- /* SPDIFRX peripheral state is READY*/
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the SPDIFRX peripheral
- * @param hspdif SPDIFRX handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Check the SPDIFRX handle allocation */
- if(hspdif == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_SPDIFRX_ALL_INSTANCE(hspdif->Instance));
-
- hspdif->State = HAL_SPDIFRX_STATE_BUSY;
-
- /* Disable SPDIFRX interface (IDLE state) */
- __HAL_SPDIFRX_IDLE(hspdif);
-
-#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
- if(hspdif->MspDeInitCallback == NULL)
- {
- hspdif->MspDeInitCallback = HAL_SPDIFRX_MspDeInit; /* Legacy weak MspDeInit */
- }
-
- /* DeInit the low level hardware */
- hspdif->MspDeInitCallback(hspdif);
-#else
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
- HAL_SPDIFRX_MspDeInit(hspdif);
-#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
-
- /* SPDIFRX peripheral state is RESET*/
- hspdif->State = HAL_SPDIFRX_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
-}
-
-/**
- * @brief SPDIFRX MSP Init
- * @param hspdif SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hspdif);
-
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief SPDIFRX MSP DeInit
- * @param hspdif SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hspdif);
-
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_MspDeInit could be implemented in the user file
- */
-}
-
-#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
-/**
- * @brief Register a User SPDIFRX Callback
- * To be used instead of the weak predefined callback
- * @param hspdif SPDIFRX handle
- * @param CallbackID ID of the callback to be registered
- * This parameter can be one of the following values:
- * @arg @ref HAL_SPDIFRX_RX_HALF_CB_ID SPDIFRX Data flow half completed callback ID
- * @arg @ref HAL_SPDIFRX_RX_CPLT_CB_ID SPDIFRX Data flow completed callback ID
- * @arg @ref HAL_SPDIFRX_CX_HALF_CB_ID SPDIFRX Control flow half completed callback ID
- * @arg @ref HAL_SPDIFRX_CX_CPLT_CB_ID SPDIFRX Control flow completed callback ID
- * @arg @ref HAL_SPDIFRX_ERROR_CB_ID SPDIFRX error callback ID
- * @arg @ref HAL_SPDIFRX_MSPINIT_CB_ID MspInit callback ID
- * @arg @ref HAL_SPDIFRX_MSPDEINIT_CB_ID MspDeInit callback ID
- * @param pCallback pointer to the Callback function
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_RegisterCallback(SPDIFRX_HandleTypeDef *hspdif, HAL_SPDIFRX_CallbackIDTypeDef CallbackID, pSPDIFRX_CallbackTypeDef pCallback)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- if(pCallback == NULL)
- {
- /* Update the error code */
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
- return HAL_ERROR;
- }
- /* Process locked */
- __HAL_LOCK(hspdif);
-
- if(HAL_SPDIFRX_STATE_READY == hspdif->State)
- {
- switch (CallbackID)
- {
- case HAL_SPDIFRX_RX_HALF_CB_ID :
- hspdif->RxHalfCpltCallback = pCallback;
- break;
-
- case HAL_SPDIFRX_RX_CPLT_CB_ID :
- hspdif->RxCpltCallback = pCallback;
- break;
-
- case HAL_SPDIFRX_CX_HALF_CB_ID :
- hspdif->CxHalfCpltCallback = pCallback;
- break;
-
- case HAL_SPDIFRX_CX_CPLT_CB_ID :
- hspdif->CxCpltCallback = pCallback;
- break;
-
- case HAL_SPDIFRX_ERROR_CB_ID :
- hspdif->ErrorCallback = pCallback;
- break;
-
- case HAL_SPDIFRX_MSPINIT_CB_ID :
- hspdif->MspInitCallback = pCallback;
- break;
-
- case HAL_SPDIFRX_MSPDEINIT_CB_ID :
- hspdif->MspDeInitCallback = pCallback;
- break;
-
- default :
- /* Update the error code */
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else if(HAL_SPDIFRX_STATE_RESET == hspdif->State)
- {
- switch (CallbackID)
- {
- case HAL_SPDIFRX_MSPINIT_CB_ID :
- hspdif->MspInitCallback = pCallback;
- break;
-
- case HAL_SPDIFRX_MSPDEINIT_CB_ID :
- hspdif->MspDeInitCallback = pCallback;
- break;
-
- default :
- /* Update the error code */
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else
- {
- /* Update the error code */
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- }
-
- /* Release Lock */
- __HAL_UNLOCK(hspdif);
- return status;
-}
-
-/**
- * @brief Unregister a SPDIFRX Callback
- * SPDIFRX callabck is redirected to the weak predefined callback
- * @param hspdif SPDIFRX handle
- * @param CallbackID ID of the callback to be unregistered
- * This parameter can be one of the following values:
- * @arg @ref HAL_SPDIFRX_RX_HALF_CB_ID SPDIFRX Data flow half completed callback ID
- * @arg @ref HAL_SPDIFRX_RX_CPLT_CB_ID SPDIFRX Data flow completed callback ID
- * @arg @ref HAL_SPDIFRX_CX_HALF_CB_ID SPDIFRX Control flow half completed callback ID
- * @arg @ref HAL_SPDIFRX_CX_CPLT_CB_ID SPDIFRX Control flow completed callback ID
- * @arg @ref HAL_SPDIFRX_ERROR_CB_ID SPDIFRX error callback ID
- * @arg @ref HAL_SPDIFRX_MSPINIT_CB_ID MspInit callback ID
- * @arg @ref HAL_SPDIFRX_MSPDEINIT_CB_ID MspDeInit callback ID
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_UnRegisterCallback(SPDIFRX_HandleTypeDef *hspdif, HAL_SPDIFRX_CallbackIDTypeDef CallbackID)
-{
-HAL_StatusTypeDef status = HAL_OK;
-
- /* Process locked */
- __HAL_LOCK(hspdif);
-
- if(HAL_SPDIFRX_STATE_READY == hspdif->State)
- {
- switch (CallbackID)
- {
- case HAL_SPDIFRX_RX_HALF_CB_ID :
- hspdif->RxHalfCpltCallback = HAL_SPDIFRX_RxHalfCpltCallback;
- break;
-
- case HAL_SPDIFRX_RX_CPLT_CB_ID :
- hspdif->RxCpltCallback = HAL_SPDIFRX_RxCpltCallback;
- break;
-
- case HAL_SPDIFRX_CX_HALF_CB_ID :
- hspdif->CxHalfCpltCallback = HAL_SPDIFRX_CxHalfCpltCallback;
- break;
-
- case HAL_SPDIFRX_CX_CPLT_CB_ID :
- hspdif->CxCpltCallback = HAL_SPDIFRX_CxCpltCallback;
- break;
-
- case HAL_SPDIFRX_ERROR_CB_ID :
- hspdif->ErrorCallback = HAL_SPDIFRX_ErrorCallback;
- break;
-
- default :
- /* Update the error code */
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else if(HAL_SPDIFRX_STATE_RESET == hspdif->State)
- {
- switch (CallbackID)
- {
- case HAL_SPDIFRX_MSPINIT_CB_ID :
- hspdif->MspInitCallback = HAL_SPDIFRX_MspInit; /* Legacy weak MspInit */
- break;
-
- case HAL_SPDIFRX_MSPDEINIT_CB_ID :
- hspdif->MspDeInitCallback = HAL_SPDIFRX_MspDeInit; /* Legacy weak MspInit */
- break;
-
- default :
- /* Update the error code */
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
- }
- }
- else
- {
- /* Update the error code */
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- }
-
- /* Release Lock */
- __HAL_UNLOCK(hspdif);
- return status;
-}
-
-#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
-
-/**
- * @brief Set the SPDIFRX data format according to the specified parameters in the SPDIFRX_InitTypeDef.
- * @param hspdif SPDIFRX handle
- * @param sDataFormat SPDIFRX data format
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat)
-{
- uint32_t tmpreg;
-
- /* Check the SPDIFRX handle allocation */
- if(hspdif == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the SPDIFRX parameters */
- assert_param(IS_STEREO_MODE(sDataFormat.StereoMode));
- assert_param(IS_SPDIFRX_DATA_FORMAT(sDataFormat.DataFormat));
- assert_param(IS_PREAMBLE_TYPE_MASK(sDataFormat.PreambleTypeMask));
- assert_param(IS_CHANNEL_STATUS_MASK(sDataFormat.ChannelStatusMask));
- assert_param(IS_VALIDITY_MASK(sDataFormat.ValidityBitMask));
- assert_param(IS_PARITY_ERROR_MASK(sDataFormat.ParityErrorMask));
-
- /* Reset the old SPDIFRX CR configuration */
- tmpreg = hspdif->Instance->CR;
-
- if(((tmpreg & SPDIFRX_STATE_RCV) == SPDIFRX_STATE_RCV) &&
- (((tmpreg & SPDIFRX_CR_DRFMT) != sDataFormat.DataFormat) ||
- ((tmpreg & SPDIFRX_CR_RXSTEO) != sDataFormat.StereoMode)))
- {
- return HAL_ERROR;
- }
-
- tmpreg &= ~(SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK |
- SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK);
-
- /* Configure the new data format */
- tmpreg |= (sDataFormat.StereoMode |
- sDataFormat.DataFormat |
- sDataFormat.PreambleTypeMask |
- sDataFormat.ChannelStatusMask |
- sDataFormat.ValidityBitMask |
- sDataFormat.ParityErrorMask);
-
- hspdif->Instance->CR = tmpreg;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup SPDIFRX_Exported_Functions_Group2 IO operation functions
+ * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SPDIFRX peripheral: + + (+) User must Implement HAL_SPDIFRX_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SPDIFRX_Init() to configure the SPDIFRX peripheral with + the selected configuration: + (++) Input Selection (IN0, IN1,...) + (++) Maximum allowed re-tries during synchronization phase + (++) Wait for activity on SPDIF selected input + (++) Channel status selection (from channel A or B) + (++) Data format (LSB, MSB, ...) + (++) Stereo mode + (++) User bits masking (PT,C,U,V,...) + + (+) Call the function HAL_SPDIFRX_DeInit() to restore the default configuration + of the selected SPDIFRXx peripheral. + @endverbatim + * @{ + */ + +/** + * @brief Initializes the SPDIFRX according to the specified parameters + * in the SPDIFRX_InitTypeDef and create the associated handle. + * @param hspdif SPDIFRX handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif) +{ + uint32_t tmpreg; + + /* Check the SPDIFRX handle allocation */ + if (hspdif == NULL) + { + return HAL_ERROR; + } + + /* Check the SPDIFRX parameters */ + assert_param(IS_STEREO_MODE(hspdif->Init.StereoMode)); + assert_param(IS_SPDIFRX_INPUT_SELECT(hspdif->Init.InputSelection)); + assert_param(IS_SPDIFRX_MAX_RETRIES(hspdif->Init.Retries)); + assert_param(IS_SPDIFRX_WAIT_FOR_ACTIVITY(hspdif->Init.WaitForActivity)); + assert_param(IS_SPDIFRX_CHANNEL(hspdif->Init.ChannelSelection)); + assert_param(IS_SPDIFRX_DATA_FORMAT(hspdif->Init.DataFormat)); + assert_param(IS_PREAMBLE_TYPE_MASK(hspdif->Init.PreambleTypeMask)); + assert_param(IS_CHANNEL_STATUS_MASK(hspdif->Init.ChannelStatusMask)); + assert_param(IS_VALIDITY_MASK(hspdif->Init.ValidityBitMask)); + assert_param(IS_PARITY_ERROR_MASK(hspdif->Init.ParityErrorMask)); + assert_param(IS_SYMBOL_CLOCK_GEN(hspdif->Init.SymbolClockGen)); + assert_param(IS_SYMBOL_CLOCK_GEN(hspdif->Init.BackupSymbolClockGen)); + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + if (hspdif->State == HAL_SPDIFRX_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspdif->Lock = HAL_UNLOCKED; + + hspdif->RxHalfCpltCallback = HAL_SPDIFRX_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hspdif->RxCpltCallback = HAL_SPDIFRX_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hspdif->CxHalfCpltCallback = HAL_SPDIFRX_CxHalfCpltCallback; /* Legacy weak CxHalfCpltCallback */ + hspdif->CxCpltCallback = HAL_SPDIFRX_CxCpltCallback; /* Legacy weak CxCpltCallback */ + hspdif->ErrorCallback = HAL_SPDIFRX_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hspdif->MspInitCallback == NULL) + { + hspdif->MspInitCallback = HAL_SPDIFRX_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hspdif->MspInitCallback(hspdif); + } +#else + if (hspdif->State == HAL_SPDIFRX_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspdif->Lock = HAL_UNLOCKED; + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_SPDIFRX_MspInit(hspdif); + } +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + + /* SPDIFRX peripheral state is BUSY */ + hspdif->State = HAL_SPDIFRX_STATE_BUSY; + + /* Disable SPDIFRX interface (IDLE State) */ + __HAL_SPDIFRX_IDLE(hspdif); + + /* Reset the old SPDIFRX CR configuration */ + tmpreg = hspdif->Instance->CR; + + tmpreg &= ~(SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK | + SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK | + SPDIFRX_CR_CHSEL | SPDIFRX_CR_NBTR | SPDIFRX_CR_WFA | + SPDIFRX_CR_CKSEN | SPDIFRX_CR_CKSBKPEN | + SPDIFRX_CR_INSEL); + + /* Sets the new configuration of the SPDIFRX peripheral */ + tmpreg |= (hspdif->Init.StereoMode | + hspdif->Init.InputSelection | + hspdif->Init.Retries | + hspdif->Init.WaitForActivity | + hspdif->Init.ChannelSelection | + hspdif->Init.DataFormat | + hspdif->Init.PreambleTypeMask | + hspdif->Init.ChannelStatusMask | + hspdif->Init.ValidityBitMask | + hspdif->Init.ParityErrorMask + ); + + if (hspdif->Init.SymbolClockGen == ENABLE) + { + tmpreg |= SPDIFRX_CR_CKSEN; + } + + if (hspdif->Init.BackupSymbolClockGen == ENABLE) + { + tmpreg |= SPDIFRX_CR_CKSBKPEN; + } + + hspdif->Instance->CR = tmpreg; + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + + /* SPDIFRX peripheral state is READY*/ + hspdif->State = HAL_SPDIFRX_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the SPDIFRX peripheral + * @param hspdif SPDIFRX handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Check the SPDIFRX handle allocation */ + if (hspdif == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPDIFRX_ALL_INSTANCE(hspdif->Instance)); + + hspdif->State = HAL_SPDIFRX_STATE_BUSY; + + /* Disable SPDIFRX interface (IDLE state) */ + __HAL_SPDIFRX_IDLE(hspdif); + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + if (hspdif->MspDeInitCallback == NULL) + { + hspdif->MspDeInitCallback = HAL_SPDIFRX_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hspdif->MspDeInitCallback(hspdif); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_SPDIFRX_MspDeInit(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + + /* SPDIFRX peripheral state is RESET*/ + hspdif->State = HAL_SPDIFRX_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; +} + +/** + * @brief SPDIFRX MSP Init + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_MspInit could be implemented in the user file + */ +} + +/** + * @brief SPDIFRX MSP DeInit + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SPDIFRX Callback + * To be used instead of the weak predefined callback + * @param hspdif SPDIFRX handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SPDIFRX_RX_HALF_CB_ID SPDIFRX Data flow half completed callback ID + * @arg @ref HAL_SPDIFRX_RX_CPLT_CB_ID SPDIFRX Data flow completed callback ID + * @arg @ref HAL_SPDIFRX_CX_HALF_CB_ID SPDIFRX Control flow half completed callback ID + * @arg @ref HAL_SPDIFRX_CX_CPLT_CB_ID SPDIFRX Control flow completed callback ID + * @arg @ref HAL_SPDIFRX_ERROR_CB_ID SPDIFRX error callback ID + * @arg @ref HAL_SPDIFRX_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SPDIFRX_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_RegisterCallback(SPDIFRX_HandleTypeDef *hspdif, HAL_SPDIFRX_CallbackIDTypeDef CallbackID, + pSPDIFRX_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hspdif); + + if (HAL_SPDIFRX_STATE_READY == hspdif->State) + { + switch (CallbackID) + { + case HAL_SPDIFRX_RX_HALF_CB_ID : + hspdif->RxHalfCpltCallback = pCallback; + break; + + case HAL_SPDIFRX_RX_CPLT_CB_ID : + hspdif->RxCpltCallback = pCallback; + break; + + case HAL_SPDIFRX_CX_HALF_CB_ID : + hspdif->CxHalfCpltCallback = pCallback; + break; + + case HAL_SPDIFRX_CX_CPLT_CB_ID : + hspdif->CxCpltCallback = pCallback; + break; + + case HAL_SPDIFRX_ERROR_CB_ID : + hspdif->ErrorCallback = pCallback; + break; + + case HAL_SPDIFRX_MSPINIT_CB_ID : + hspdif->MspInitCallback = pCallback; + break; + + case HAL_SPDIFRX_MSPDEINIT_CB_ID : + hspdif->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPDIFRX_STATE_RESET == hspdif->State) + { + switch (CallbackID) + { + case HAL_SPDIFRX_MSPINIT_CB_ID : + hspdif->MspInitCallback = pCallback; + break; + + case HAL_SPDIFRX_MSPDEINIT_CB_ID : + hspdif->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspdif); + return status; +} + +/** + * @brief Unregister a SPDIFRX Callback + * SPDIFRX callback is redirected to the weak predefined callback + * @param hspdif SPDIFRX handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SPDIFRX_RX_HALF_CB_ID SPDIFRX Data flow half completed callback ID + * @arg @ref HAL_SPDIFRX_RX_CPLT_CB_ID SPDIFRX Data flow completed callback ID + * @arg @ref HAL_SPDIFRX_CX_HALF_CB_ID SPDIFRX Control flow half completed callback ID + * @arg @ref HAL_SPDIFRX_CX_CPLT_CB_ID SPDIFRX Control flow completed callback ID + * @arg @ref HAL_SPDIFRX_ERROR_CB_ID SPDIFRX error callback ID + * @arg @ref HAL_SPDIFRX_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SPDIFRX_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_UnRegisterCallback(SPDIFRX_HandleTypeDef *hspdif, + HAL_SPDIFRX_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hspdif); + + if (HAL_SPDIFRX_STATE_READY == hspdif->State) + { + switch (CallbackID) + { + case HAL_SPDIFRX_RX_HALF_CB_ID : + hspdif->RxHalfCpltCallback = HAL_SPDIFRX_RxHalfCpltCallback; + break; + + case HAL_SPDIFRX_RX_CPLT_CB_ID : + hspdif->RxCpltCallback = HAL_SPDIFRX_RxCpltCallback; + break; + + case HAL_SPDIFRX_CX_HALF_CB_ID : + hspdif->CxHalfCpltCallback = HAL_SPDIFRX_CxHalfCpltCallback; + break; + + case HAL_SPDIFRX_CX_CPLT_CB_ID : + hspdif->CxCpltCallback = HAL_SPDIFRX_CxCpltCallback; + break; + + case HAL_SPDIFRX_ERROR_CB_ID : + hspdif->ErrorCallback = HAL_SPDIFRX_ErrorCallback; + break; + + default : + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPDIFRX_STATE_RESET == hspdif->State) + { + switch (CallbackID) + { + case HAL_SPDIFRX_MSPINIT_CB_ID : + hspdif->MspInitCallback = HAL_SPDIFRX_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPDIFRX_MSPDEINIT_CB_ID : + hspdif->MspDeInitCallback = HAL_SPDIFRX_MspDeInit; /* Legacy weak MspInit */ + break; + + default : + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspdif); + return status; +} + +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + +/** + * @brief Set the SPDIFRX data format according to the specified parameters in the SPDIFRX_InitTypeDef. + * @param hspdif SPDIFRX handle + * @param sDataFormat SPDIFRX data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat) +{ + uint32_t tmpreg; + + /* Check the SPDIFRX handle allocation */ + if (hspdif == NULL) + { + return HAL_ERROR; + } + + /* Check the SPDIFRX parameters */ + assert_param(IS_STEREO_MODE(sDataFormat.StereoMode)); + assert_param(IS_SPDIFRX_DATA_FORMAT(sDataFormat.DataFormat)); + assert_param(IS_PREAMBLE_TYPE_MASK(sDataFormat.PreambleTypeMask)); + assert_param(IS_CHANNEL_STATUS_MASK(sDataFormat.ChannelStatusMask)); + assert_param(IS_VALIDITY_MASK(sDataFormat.ValidityBitMask)); + assert_param(IS_PARITY_ERROR_MASK(sDataFormat.ParityErrorMask)); + + /* Reset the old SPDIFRX CR configuration */ + tmpreg = hspdif->Instance->CR; + + if (((tmpreg & SPDIFRX_STATE_RCV) == SPDIFRX_STATE_RCV) && + (((tmpreg & SPDIFRX_CR_DRFMT) != sDataFormat.DataFormat) || + ((tmpreg & SPDIFRX_CR_RXSTEO) != sDataFormat.StereoMode))) + { + return HAL_ERROR; + } + + tmpreg &= ~(SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK | + SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK); + + /* Configure the new data format */ + tmpreg |= (sDataFormat.StereoMode | + sDataFormat.DataFormat | + sDataFormat.PreambleTypeMask | + sDataFormat.ChannelStatusMask | + sDataFormat.ValidityBitMask | + sDataFormat.ParityErrorMask); + + hspdif->Instance->CR = tmpreg; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup SPDIFRX_Exported_Functions_Group2 IO operation functions * @ingroup RTEMSBSPsARMSTM32H7 - * @brief Data transfers functions
- *
-@verbatim
-===============================================================================
- ##### IO operation functions #####
-===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the SPDIFRX data
- transfers.
-
- (#) There is two mode of transfer:
- (++) Blocking mode : The communication is performed in the polling mode.
- The status of all data processing is returned by the same function
- after finishing transfer.
- (++) No-Blocking mode : The communication is performed using Interrupts
- or DMA. These functions return the status of the transfer start-up.
- The end of the data processing will be indicated through the
- dedicated SPDIFRX IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
-
- (#) Blocking mode functions are :
- (++) HAL_SPDIFRX_ReceiveDataFlow()
- (++) HAL_SPDIFRX_ReceiveCtrlFlow()
- (+@) Do not use blocking mode to receive both control and data flow at the same time.
-
- (#) No-Blocking mode functions with Interrupt are :
- (++) HAL_SPDIFRX_ReceiveCtrlFlow_IT()
- (++) HAL_SPDIFRX_ReceiveDataFlow_IT()
-
- (#) No-Blocking mode functions with DMA are :
- (++) HAL_SPDIFRX_ReceiveCtrlFlow_DMA()
- (++) HAL_SPDIFRX_ReceiveDataFlow_DMA()
-
- (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
- (++) HAL_SPDIFRX_RxCpltCallback()
- (++) HAL_SPDIFRX_CxCpltCallback()
-
-@endverbatim
-* @{
-*/
-
-/**
- * @brief Receives an amount of data (Data Flow) in blocking mode.
- * @param hspdif pointer to SPDIFRX_HandleTypeDef structure that contains
- * the configuration information for SPDIFRX module.
- * @param pData Pointer to data buffer
- * @param Size Amount of data to be received
- * @param Timeout Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint32_t tickstart;
- uint16_t sizeCounter = Size;
- uint32_t *pTmpBuf = pData;
-
- if((pData == NULL ) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- if(hspdif->State == HAL_SPDIFRX_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->State = HAL_SPDIFRX_STATE_BUSY;
-
- /* Start synchronisation */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until SYNCD flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout, tickstart) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
-
- /* Receive data flow */
- while(sizeCounter > 0U)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until RXNE flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- (*pTmpBuf) = hspdif->Instance->DR;
- pTmpBuf++;
- sizeCounter--;
- }
-
- /* SPDIFRX ready */
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data (Control Flow) in blocking mode.
- * @param hspdif pointer to a SPDIFRX_HandleTypeDef structure that contains
- * the configuration information for SPDIFRX module.
- * @param pData Pointer to data buffer
- * @param Size Amount of data to be received
- * @param Timeout Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint32_t tickstart;
- uint16_t sizeCounter = Size;
- uint32_t *pTmpBuf = pData;
-
- if((pData == NULL ) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- if(hspdif->State == HAL_SPDIFRX_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->State = HAL_SPDIFRX_STATE_BUSY;
-
- /* Start synchronization */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until SYNCD flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout, tickstart) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
-
- /* Receive control flow */
- while(sizeCounter > 0U)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until CSRNE flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_CSRNE, RESET, Timeout, tickstart) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- (*pTmpBuf) = hspdif->Instance->CSR;
- pTmpBuf++;
- sizeCounter--;
- }
-
- /* SPDIFRX ready */
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data (Data Flow) in non-blocking mode with Interrupt
- * @param hspdif SPDIFRX handle
- * @param pData a 32-bit pointer to the Receive data buffer.
- * @param Size number of data sample to be received .
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
-{
- register uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
-
- const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State;
-
- if((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_CX))
- {
- if((pData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->pRxBuffPtr = pData;
- hspdif->RxXferSize = Size;
- hspdif->RxXferCount = Size;
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
-
- /* Check if a receive process is ongoing or not */
- hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
-
- /* Enable the SPDIFRX PE Error Interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
-
- /* Enable the SPDIFRX OVR Error Interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
-
- /* Enable the SPDIFRX RXNE interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_RXNE);
-
- if((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV)
- {
- /* Start synchronization */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Wait until SYNCD flag is set */
- do
- {
- if (count == 0U)
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
-
- hspdif->State= HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_TIMEOUT;
- }
- count--;
- } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data (Control Flow) with Interrupt
- * @param hspdif SPDIFRX handle
- * @param pData a 32-bit pointer to the Receive data buffer.
- * @param Size number of data sample (Control Flow) to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
-{
- register uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
-
- const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State;
-
- if((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_RX))
- {
- if((pData == NULL ) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->pCsBuffPtr = pData;
- hspdif->CsXferSize = Size;
- hspdif->CsXferCount = Size;
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
-
- /* Check if a receive process is ongoing or not */
- hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
-
- /* Enable the SPDIFRX PE Error Interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
-
- /* Enable the SPDIFRX OVR Error Interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
-
- /* Enable the SPDIFRX CSRNE interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
-
- if((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV)
- {
- /* Start synchronization */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Wait until SYNCD flag is set */
- do
- {
- if (count == 0U)
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
-
- hspdif->State= HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_TIMEOUT;
- }
- count--;
- } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data (Data Flow) mode with DMA
- * @param hspdif SPDIFRX handle
- * @param pData a 32-bit pointer to the Receive data buffer.
- * @param Size number of data sample to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
-{
- register uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
-
- const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State;
-
- if((pData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- if((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_CX))
- {
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->pRxBuffPtr = pData;
- hspdif->RxXferSize = Size;
- hspdif->RxXferCount = Size;
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
- hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
-
- /* Set the SPDIFRX Rx DMA Half transfer complete callback */
- hspdif->hdmaDrRx->XferHalfCpltCallback = SPDIFRX_DMARxHalfCplt;
-
- /* Set the SPDIFRX Rx DMA transfer complete callback */
- hspdif->hdmaDrRx->XferCpltCallback = SPDIFRX_DMARxCplt;
-
- /* Set the DMA error callback */
- hspdif->hdmaDrRx->XferErrorCallback = SPDIFRX_DMAError;
-
- /* Enable the DMA request */
- if(HAL_DMA_Start_IT(hspdif->hdmaDrRx, (uint32_t)&hspdif->Instance->DR, (uint32_t)hspdif->pRxBuffPtr, Size) != HAL_OK)
- {
- /* Set SPDIFRX error */
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA;
-
- /* Set SPDIFRX state */
- hspdif->State = HAL_SPDIFRX_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_ERROR;
- }
-
- /* Enable RXDMAEN bit in SPDIFRX CR register for data flow reception*/
- hspdif->Instance->CR |= SPDIFRX_CR_RXDMAEN;
-
- if((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV)
- {
- /* Start synchronization */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Wait until SYNCD flag is set */
- do
- {
- if (count == 0U)
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
-
- hspdif->State= HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_TIMEOUT;
- }
- count--;
- } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data (Control Flow) with DMA
- * @param hspdif SPDIFRX handle
- * @param pData a 32-bit pointer to the Receive data buffer.
- * @param Size number of data (Control Flow) sample to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
-{
- register uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
-
- const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State;
-
- if((pData == NULL) || (Size == 0U))
- {
- return HAL_ERROR;
- }
-
- if((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_RX))
- {
- hspdif->pCsBuffPtr = pData;
- hspdif->CsXferSize = Size;
- hspdif->CsXferCount = Size;
-
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
- hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
-
- /* Set the SPDIFRX Rx DMA Half transfer complete callback */
- hspdif->hdmaCsRx->XferHalfCpltCallback = SPDIFRX_DMACxHalfCplt;
-
- /* Set the SPDIFRX Rx DMA transfer complete callback */
- hspdif->hdmaCsRx->XferCpltCallback = SPDIFRX_DMACxCplt;
-
- /* Set the DMA error callback */
- hspdif->hdmaCsRx->XferErrorCallback = SPDIFRX_DMAError;
-
- /* Enable the DMA request */
- if(HAL_DMA_Start_IT(hspdif->hdmaCsRx, (uint32_t)&hspdif->Instance->CSR, (uint32_t)hspdif->pCsBuffPtr, Size) != HAL_OK)
- {
- /* Set SPDIFRX error */
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA;
-
- /* Set SPDIFRX state */
- hspdif->State = HAL_SPDIFRX_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_ERROR;
- }
-
- /* Enable CBDMAEN bit in SPDIFRX CR register for control flow reception*/
- hspdif->Instance->CR |= SPDIFRX_CR_CBDMAEN;
-
- if((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV)
- {
- /* Start synchronization */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Wait until SYNCD flag is set */
- do
- {
- if (count == 0U)
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
-
- hspdif->State= HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_TIMEOUT;
- }
- count--;
- } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief stop the audio stream receive from the Media.
- * @param hspdif SPDIFRX handle
- * @retval None
- */
-HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- /* Disable the SPDIFRX DMA requests */
- hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
- hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
-
- /* Disable the SPDIFRX DMA channel */
- __HAL_DMA_DISABLE(hspdif->hdmaDrRx);
- __HAL_DMA_DISABLE(hspdif->hdmaCsRx);
-
- /* Disable SPDIFRX peripheral */
- __HAL_SPDIFRX_IDLE(hspdif);
-
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles SPDIFRX interrupt request.
- * @param hspdif SPDIFRX handle
- * @retval HAL status
- */
-void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif)
-{
- uint32_t itFlag = hspdif->Instance->SR;
- uint32_t itSource = hspdif->Instance->IMR;
-
- /* SPDIFRX in mode Data Flow Reception */
- if(((itFlag & SPDIFRX_FLAG_RXNE) == SPDIFRX_FLAG_RXNE) && ((itSource & SPDIFRX_IT_RXNE) == SPDIFRX_IT_RXNE))
- {
- __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_RXNE);
- SPDIFRX_ReceiveDataFlow_IT(hspdif);
- }
-
- /* SPDIFRX in mode Control Flow Reception */
- if(((itFlag & SPDIFRX_FLAG_CSRNE) == SPDIFRX_FLAG_CSRNE) && ((itSource & SPDIFRX_IT_CSRNE) == SPDIFRX_IT_CSRNE))
- {
- __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_CSRNE);
- SPDIFRX_ReceiveControlFlow_IT(hspdif);
- }
-
- /* SPDIFRX Overrun error interrupt occurred */
- if(((itFlag & SPDIFRX_FLAG_OVR) == SPDIFRX_FLAG_OVR) && ((itSource & SPDIFRX_IT_OVRIE) == SPDIFRX_IT_OVRIE))
- {
- __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_OVRIE);
-
- /* Change the SPDIFRX error code */
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_OVR;
-
- /* the transfer is not stopped */
- HAL_SPDIFRX_ErrorCallback(hspdif);
- }
-
- /* SPDIFRX Parity error interrupt occurred */
- if(((itFlag & SPDIFRX_FLAG_PERR) == SPDIFRX_FLAG_PERR) && ((itSource & SPDIFRX_IT_PERRIE) == SPDIFRX_IT_PERRIE))
- {
- __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_PERRIE);
-
- /* Change the SPDIFRX error code */
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_PE;
-
- /* the transfer is not stopped */
- HAL_SPDIFRX_ErrorCallback(hspdif);
- }
-}
-
-/**
- * @brief Rx Transfer (Data flow) half completed callbacks
- * @param hspdif SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hspdif);
-
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer (Data flow) completed callbacks
- * @param hspdif SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hspdif);
-
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx (Control flow) Transfer half completed callbacks
- * @param hspdif SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hspdif);
-
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer (Control flow) completed callbacks
- * @param hspdif SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hspdif);
-
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief SPDIFRX error callbacks
- * @param hspdif SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hspdif);
-
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup SPDIFRX_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Data transfers functions + * +@verbatim +=============================================================================== + ##### IO operation functions ##### +=============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SPDIFRX data + transfers. + + (#) There is two mode of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer start-up. + The end of the data processing will be indicated through the + dedicated SPDIFRX IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_SPDIFRX_ReceiveDataFlow() + (++) HAL_SPDIFRX_ReceiveCtrlFlow() + (+@) Do not use blocking mode to receive both control and data flow at the same time. + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_SPDIFRX_ReceiveCtrlFlow_IT() + (++) HAL_SPDIFRX_ReceiveDataFlow_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_SPDIFRX_ReceiveCtrlFlow_DMA() + (++) HAL_SPDIFRX_ReceiveDataFlow_DMA() + + (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode: + (++) HAL_SPDIFRX_RxCpltCallback() + (++) HAL_SPDIFRX_CxCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Receives an amount of data (Data Flow) in blocking mode. + * @param hspdif pointer to SPDIFRX_HandleTypeDef structure that contains + * the configuration information for SPDIFRX module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t sizeCounter = Size; + uint32_t *pTmpBuf = pData; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hspdif->State == HAL_SPDIFRX_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->State = HAL_SPDIFRX_STATE_BUSY; + + /* Start synchronisation */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until SYNCD flag is set */ + if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + + /* Receive data flow */ + while (sizeCounter > 0U) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until RXNE flag is set */ + if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + (*pTmpBuf) = hspdif->Instance->DR; + pTmpBuf++; + sizeCounter--; + } + + /* SPDIFRX ready */ + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data (Control Flow) in blocking mode. + * @param hspdif pointer to a SPDIFRX_HandleTypeDef structure that contains + * the configuration information for SPDIFRX module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t sizeCounter = Size; + uint32_t *pTmpBuf = pData; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hspdif->State == HAL_SPDIFRX_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->State = HAL_SPDIFRX_STATE_BUSY; + + /* Start synchronization */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until SYNCD flag is set */ + if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + + /* Receive control flow */ + while (sizeCounter > 0U) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until CSRNE flag is set */ + if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_CSRNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + (*pTmpBuf) = hspdif->Instance->CSR; + pTmpBuf++; + sizeCounter--; + } + + /* SPDIFRX ready */ + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data (Data Flow) in non-blocking mode with Interrupt + * @param hspdif SPDIFRX handle + * @param pData a 32-bit pointer to the Receive data buffer. + * @param Size number of data sample to be received . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) +{ + uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); + + const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; + + if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_CX)) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->pRxBuffPtr = pData; + hspdif->RxXferSize = Size; + hspdif->RxXferCount = Size; + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + + /* Check if a receive process is ongoing or not */ + hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX; + + /* Enable the SPDIFRX PE Error Interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + + /* Enable the SPDIFRX OVR Error Interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + + /* Enable the SPDIFRX RXNE interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_RXNE); + + if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV) + { + /* Start synchronization */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Wait until SYNCD flag is set */ + do + { + if (count == 0U) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_TIMEOUT; + } + count--; + } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data (Control Flow) with Interrupt + * @param hspdif SPDIFRX handle + * @param pData a 32-bit pointer to the Receive data buffer. + * @param Size number of data sample (Control Flow) to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) +{ + uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); + + const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; + + if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_RX)) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->pCsBuffPtr = pData; + hspdif->CsXferSize = Size; + hspdif->CsXferCount = Size; + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + + /* Check if a receive process is ongoing or not */ + hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX; + + /* Enable the SPDIFRX PE Error Interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + + /* Enable the SPDIFRX OVR Error Interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + + /* Enable the SPDIFRX CSRNE interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + + if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV) + { + /* Start synchronization */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Wait until SYNCD flag is set */ + do + { + if (count == 0U) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_TIMEOUT; + } + count--; + } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data (Data Flow) mode with DMA + * @param hspdif SPDIFRX handle + * @param pData a 32-bit pointer to the Receive data buffer. + * @param Size number of data sample to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) +{ + uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); + + const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_CX)) + { + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->pRxBuffPtr = pData; + hspdif->RxXferSize = Size; + hspdif->RxXferCount = Size; + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX; + + /* Set the SPDIFRX Rx DMA Half transfer complete callback */ + hspdif->hdmaDrRx->XferHalfCpltCallback = SPDIFRX_DMARxHalfCplt; + + /* Set the SPDIFRX Rx DMA transfer complete callback */ + hspdif->hdmaDrRx->XferCpltCallback = SPDIFRX_DMARxCplt; + + /* Set the DMA error callback */ + hspdif->hdmaDrRx->XferErrorCallback = SPDIFRX_DMAError; + + /* Enable the DMA request */ + if (HAL_DMA_Start_IT(hspdif->hdmaDrRx, (uint32_t)&hspdif->Instance->DR, (uint32_t)hspdif->pRxBuffPtr, Size) != HAL_OK) + { + /* Set SPDIFRX error */ + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA; + + /* Set SPDIFRX state */ + hspdif->State = HAL_SPDIFRX_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_ERROR; + } + + /* Enable RXDMAEN bit in SPDIFRX CR register for data flow reception*/ + hspdif->Instance->CR |= SPDIFRX_CR_RXDMAEN; + + if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV) + { + /* Start synchronization */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Wait until SYNCD flag is set */ + do + { + if (count == 0U) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_TIMEOUT; + } + count--; + } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data (Control Flow) with DMA + * @param hspdif SPDIFRX handle + * @param pData a 32-bit pointer to the Receive data buffer. + * @param Size number of data (Control Flow) sample to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) +{ + uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); + + const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_RX)) + { + hspdif->pCsBuffPtr = pData; + hspdif->CsXferSize = Size; + hspdif->CsXferCount = Size; + + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX; + + /* Set the SPDIFRX Rx DMA Half transfer complete callback */ + hspdif->hdmaCsRx->XferHalfCpltCallback = SPDIFRX_DMACxHalfCplt; + + /* Set the SPDIFRX Rx DMA transfer complete callback */ + hspdif->hdmaCsRx->XferCpltCallback = SPDIFRX_DMACxCplt; + + /* Set the DMA error callback */ + hspdif->hdmaCsRx->XferErrorCallback = SPDIFRX_DMAError; + + /* Enable the DMA request */ + if (HAL_DMA_Start_IT(hspdif->hdmaCsRx, (uint32_t)&hspdif->Instance->CSR, (uint32_t)hspdif->pCsBuffPtr, Size) != HAL_OK) + { + /* Set SPDIFRX error */ + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA; + + /* Set SPDIFRX state */ + hspdif->State = HAL_SPDIFRX_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_ERROR; + } + + /* Enable CBDMAEN bit in SPDIFRX CR register for control flow reception*/ + hspdif->Instance->CR |= SPDIFRX_CR_CBDMAEN; + + if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_RCV) + { + /* Start synchronization */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Wait until SYNCD flag is set */ + do + { + if (count == 0U) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_TIMEOUT; + } + count--; + } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief stop the audio stream receive from the Media. + * @param hspdif SPDIFRX handle + * @retval None + */ +HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Process Locked */ + __HAL_LOCK(hspdif); + + /* Disable the SPDIFRX DMA requests */ + hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN); + hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN); + + /* Disable the SPDIFRX DMA channel */ + __HAL_DMA_DISABLE(hspdif->hdmaDrRx); + __HAL_DMA_DISABLE(hspdif->hdmaCsRx); + + /* Disable SPDIFRX peripheral */ + __HAL_SPDIFRX_IDLE(hspdif); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; +} + +/** + * @brief This function handles SPDIFRX interrupt request. + * @param hspdif SPDIFRX handle + * @retval HAL status + */ +void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif) +{ + uint32_t itFlag = hspdif->Instance->SR; + uint32_t itSource = hspdif->Instance->IMR; + + /* SPDIFRX in mode Data Flow Reception */ + if (((itFlag & SPDIFRX_FLAG_RXNE) == SPDIFRX_FLAG_RXNE) && ((itSource & SPDIFRX_IT_RXNE) == SPDIFRX_IT_RXNE)) + { + __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_RXNE); + SPDIFRX_ReceiveDataFlow_IT(hspdif); + } + + /* SPDIFRX in mode Control Flow Reception */ + if (((itFlag & SPDIFRX_FLAG_CSRNE) == SPDIFRX_FLAG_CSRNE) && ((itSource & SPDIFRX_IT_CSRNE) == SPDIFRX_IT_CSRNE)) + { + __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_CSRNE); + SPDIFRX_ReceiveControlFlow_IT(hspdif); + } + + /* SPDIFRX Overrun error interrupt occurred */ + if (((itFlag & SPDIFRX_FLAG_OVR) == SPDIFRX_FLAG_OVR) && ((itSource & SPDIFRX_IT_OVRIE) == SPDIFRX_IT_OVRIE)) + { + __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_OVRIE); + + /* Change the SPDIFRX error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_OVR; + + /* the transfer is not stopped */ + HAL_SPDIFRX_ErrorCallback(hspdif); + } + + /* SPDIFRX Parity error interrupt occurred */ + if (((itFlag & SPDIFRX_FLAG_PERR) == SPDIFRX_FLAG_PERR) && ((itSource & SPDIFRX_IT_PERRIE) == SPDIFRX_IT_PERRIE)) + { + __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_PERRIE); + + /* Change the SPDIFRX error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_PE; + + /* the transfer is not stopped */ + HAL_SPDIFRX_ErrorCallback(hspdif); + } +} + +/** + * @brief Rx Transfer (Data flow) half completed callbacks + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer (Data flow) completed callbacks + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx (Control flow) Transfer half completed callbacks + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer (Control flow) completed callbacks + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief SPDIFRX error callbacks + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SPDIFRX_Exported_Functions_Group3 Peripheral State and Errors functions * @ingroup RTEMSBSPsARMSTM32H7 - * @brief Peripheral State functions
- *
-@verbatim
-===============================================================================
-##### Peripheral State and Errors functions #####
-===============================================================================
-[..]
-This subsection permit to get in run-time the status of the peripheral
-and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the SPDIFRX state
- * @param hspdif SPDIFRX handle
- * @retval HAL state
- */
-HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef const * const hspdif)
-{
- return hspdif->State;
-}
-
-/**
- * @brief Return the SPDIFRX error code
- * @param hspdif SPDIFRX handle
- * @retval SPDIFRX Error Code
- */
-uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef const * const hspdif)
-{
- return hspdif->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief DMA SPDIFRX receive process (Data flow) complete callback
- * @param hdma DMA handle
- * @retval None
- */
-static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma)
-{
- SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Disable Rx DMA Request */
- if(hdma->Init.Mode != DMA_CIRCULAR)
- {
- hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
- hspdif->RxXferCount = 0;
- hspdif->State = HAL_SPDIFRX_STATE_READY;
- }
-#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
- hspdif->RxCpltCallback(hspdif);
-#else
- HAL_SPDIFRX_RxCpltCallback(hspdif);
-#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
-}
-
-/**
- * @brief DMA SPDIFRX receive process (Data flow) half complete callback
- * @param hdma DMA handle
- * @retval None
- */
-static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
-#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
- hspdif->RxHalfCpltCallback(hspdif);
-#else
- HAL_SPDIFRX_RxHalfCpltCallback(hspdif);
-#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
-}
-
-
-/**
- * @brief DMA SPDIFRX receive process (Control flow) complete callback
- * @param hdma DMA handle
- * @retval None
- */
-static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma)
-{
- SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Disable Cb DMA Request */
- hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
- hspdif->CsXferCount = 0;
-
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
- hspdif->CxCpltCallback(hspdif);
-#else
- HAL_SPDIFRX_CxCpltCallback(hspdif);
-#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
-}
-
-/**
- * @brief DMA SPDIFRX receive process (Control flow) half complete callback
- * @param hdma DMA handle
- * @retval None
- */
-static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
-#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
- hspdif->CxHalfCpltCallback(hspdif);
-#else
- HAL_SPDIFRX_CxHalfCpltCallback(hspdif);
-#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
-}
-
-/**
- * @brief DMA SPDIFRX communication error callback
- * @param hdma DMA handle
- * @retval None
- */
-static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma)
-{
- SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Disable Rx and Cb DMA Request */
- hspdif->Instance->CR &= (uint16_t)(~(SPDIFRX_CR_RXDMAEN | SPDIFRX_CR_CBDMAEN));
- hspdif->RxXferCount = 0;
-
- hspdif->State= HAL_SPDIFRX_STATE_READY;
-
- /* Set the error code and execute error callback*/
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_DMA;
-
-#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
- /* The transfer is not stopped */
- hspdif->ErrorCallback(hspdif);
-#else
- /* The transfer is not stopped */
- HAL_SPDIFRX_ErrorCallback(hspdif);
-#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
-}
-
-/**
- * @brief Receive an amount of data (Data Flow) with Interrupt
- * @param hspdif SPDIFRX handle
- * @retval None
- */
-static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Receive data */
- (*hspdif->pRxBuffPtr) = hspdif->Instance->DR;
- hspdif->pRxBuffPtr++;
- hspdif->RxXferCount--;
-
- if(hspdif->RxXferCount == 0U)
- {
- /* Disable RXNE/PE and OVR interrupts */
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE | SPDIFRX_IT_PERRIE | SPDIFRX_IT_RXNE);
-
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
-#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
- hspdif->RxCpltCallback(hspdif);
-#else
- HAL_SPDIFRX_RxCpltCallback(hspdif);
-#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
- }
-}
-
-/**
- * @brief Receive an amount of data (Control Flow) with Interrupt
- * @param hspdif SPDIFRX handle
- * @retval None
- */
-static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Receive data */
- (*hspdif->pCsBuffPtr) = hspdif->Instance->CSR;
- hspdif->pCsBuffPtr++;
- hspdif->CsXferCount--;
-
- if(hspdif->CsXferCount == 0U)
- {
- /* Disable CSRNE interrupt */
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
-
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
-#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1)
- hspdif->CxCpltCallback(hspdif);
-#else
- HAL_SPDIFRX_CxCpltCallback(hspdif);
-#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */
- }
-}
-
-/**
- * @brief This function handles SPDIFRX Communication Timeout.
- * @param hspdif SPDIFRX handle
- * @param Flag Flag checked
- * @param Status Value of the flag expected
- * @param Timeout Duration of the timeout
- * @param tickstart Tick start value
- * @retval HAL status
- */
-static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t tickstart)
-{
- /* Wait until flag is set */
- while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) == Status)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if(((HAL_GetTick() - tickstart ) > Timeout) || (Timeout == 0U))
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
-
- hspdif->State= HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-
-#endif /* SPDIFRX */
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+ * @brief Peripheral State functions + * +@verbatim +=============================================================================== +##### Peripheral State and Errors functions ##### +=============================================================================== +[..] +This subsection permit to get in run-time the status of the peripheral +and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SPDIFRX state + * @param hspdif SPDIFRX handle + * @retval HAL state + */ +HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef const *const hspdif) +{ + return hspdif->State; +} + +/** + * @brief Return the SPDIFRX error code + * @param hspdif SPDIFRX handle + * @retval SPDIFRX Error Code + */ +uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef const *const hspdif) +{ + return hspdif->ErrorCode; +} + +/** + * @} + */ + +/** + * @brief DMA SPDIFRX receive process (Data flow) complete callback + * @param hdma DMA handle + * @retval None + */ +static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma) +{ + SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable Rx DMA Request */ + if (hdma->Init.Mode != DMA_CIRCULAR) + { + hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN); + hspdif->RxXferCount = 0; + hspdif->State = HAL_SPDIFRX_STATE_READY; + } +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->RxCpltCallback(hspdif); +#else + HAL_SPDIFRX_RxCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPDIFRX receive process (Data flow) half complete callback + * @param hdma DMA handle + * @retval None + */ +static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->RxHalfCpltCallback(hspdif); +#else + HAL_SPDIFRX_RxHalfCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA SPDIFRX receive process (Control flow) complete callback + * @param hdma DMA handle + * @retval None + */ +static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma) +{ + SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable Cb DMA Request */ + hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN); + hspdif->CsXferCount = 0; + + hspdif->State = HAL_SPDIFRX_STATE_READY; +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->CxCpltCallback(hspdif); +#else + HAL_SPDIFRX_CxCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPDIFRX receive process (Control flow) half complete callback + * @param hdma DMA handle + * @retval None + */ +static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma) +{ + SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->CxHalfCpltCallback(hspdif); +#else + HAL_SPDIFRX_CxHalfCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPDIFRX communication error callback + * @param hdma DMA handle + * @retval None + */ +static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma) +{ + SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable Rx and Cb DMA Request */ + hspdif->Instance->CR &= (uint16_t)(~(SPDIFRX_CR_RXDMAEN | SPDIFRX_CR_CBDMAEN)); + hspdif->RxXferCount = 0; + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Set the error code and execute error callback*/ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_DMA; + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + /* The transfer is not stopped */ + hspdif->ErrorCallback(hspdif); +#else + /* The transfer is not stopped */ + HAL_SPDIFRX_ErrorCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +} + +/** + * @brief Receive an amount of data (Data Flow) with Interrupt + * @param hspdif SPDIFRX handle + * @retval None + */ +static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Receive data */ + (*hspdif->pRxBuffPtr) = hspdif->Instance->DR; + hspdif->pRxBuffPtr++; + hspdif->RxXferCount--; + + if (hspdif->RxXferCount == 0U) + { + /* Disable RXNE/PE and OVR interrupts */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE | SPDIFRX_IT_PERRIE | SPDIFRX_IT_RXNE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->RxCpltCallback(hspdif); +#else + HAL_SPDIFRX_RxCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Receive an amount of data (Control Flow) with Interrupt + * @param hspdif SPDIFRX handle + * @retval None + */ +static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Receive data */ + (*hspdif->pCsBuffPtr) = hspdif->Instance->CSR; + hspdif->pCsBuffPtr++; + hspdif->CsXferCount--; + + if (hspdif->CsXferCount == 0U) + { + /* Disable CSRNE interrupt */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->CxCpltCallback(hspdif); +#else + HAL_SPDIFRX_CxCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + } +} + +/** + * @brief This function handles SPDIFRX Communication Timeout. + * @param hspdif SPDIFRX handle + * @param Flag Flag checked + * @param Status Value of the flag expected + * @param Timeout Duration of the timeout + * @param tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t tickstart) +{ + /* Wait until flag is set */ + while (__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + +/** + * @} + */ + + +#endif /* SPDIFRX */ +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ |