diff options
Diffstat (limited to 'bsps/arm/imxrt/mcux-sdk/drivers/lcdifv2/fsl_lcdifv2.h')
-rw-r--r-- | bsps/arm/imxrt/mcux-sdk/drivers/lcdifv2/fsl_lcdifv2.h | 655 |
1 files changed, 655 insertions, 0 deletions
diff --git a/bsps/arm/imxrt/mcux-sdk/drivers/lcdifv2/fsl_lcdifv2.h b/bsps/arm/imxrt/mcux-sdk/drivers/lcdifv2/fsl_lcdifv2.h new file mode 100644 index 0000000000..41a5d90ac6 --- /dev/null +++ b/bsps/arm/imxrt/mcux-sdk/drivers/lcdifv2/fsl_lcdifv2.h @@ -0,0 +1,655 @@ +/* + * Copyright 2019-2022 NXP + * All rights reserved. + * + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef _FSL_LCDIFV2_H_ +#define _FSL_LCDIFV2_H_ + +#include "fsl_common.h" + +#if (defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET) && (0 != FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET)) +#include "fsl_memory.h" +#endif + +/*! + * @addtogroup lcdifv2 + * @{ + */ + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +/*! @brief LCDIF v2 driver version */ +#define FSL_LCDIFV2_DRIVER_VERSION (MAKE_VERSION(2, 3, 2)) +/*@}*/ + +#if defined(FSL_FEATURE_LCDIFV2_LAYER_COUNT) && (!defined(LCDIFV2_LAYER_COUNT)) +#define LCDIFV2_LAYER_COUNT FSL_FEATURE_LCDIFV2_LAYER_COUNT +#endif + +#if defined(FSL_FEATURE_LCDIFV2_LAYER_CSC_COUNT) && (!defined(LCDIFV2_LAYER_CSC_COUNT)) +#define LCDIFV2_LAYER_CSC_COUNT FSL_FEATURE_LCDIFV2_LAYER_CSC_COUNT +#endif + +#if (defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET) && (0 != FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET)) +#define LCDIFV2_ADDR_CPU_2_IP(addr) (MEMORY_ConvertMemoryMapAddress((uint32_t)(addr), kMEMORY_Local2DMA)) +#else +#define LCDIFV2_ADDR_CPU_2_IP(addr) (addr) +#endif /* FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET */ + +/*! @brief LCDIF v2 FIFO empty interrupt. */ +#define LCDIFV2_MAKE_FIFO_EMPTY_INTERRUPT(layer) (1UL << ((uint32_t)(layer) + 24U)) +/*! @brief LCDIF v2 DMA done interrupt. */ +#define LCDIFV2_MAKE_DMA_DONE_INTERRUPT(layer) (1UL << ((uint32_t)(layer) + 16U)) +/*! @brief LCDIF v2 DMA error interrupt. */ +#define LCDIFV2_MAKE_DMA_ERROR_INTERRUPT(layer) (1UL << ((uint32_t)(layer) + 8U)) + +/* LUT memory entery number. */ +#define LCDIFV2_LUT_ENTRY_NUM 256U + +/*! + * @brief LCDIF v2 signal polarity flags + */ +enum _lcdifv2_polarity_flags +{ + kLCDIFV2_VsyncActiveHigh = 0U, /*!< VSYNC active high. */ + kLCDIFV2_HsyncActiveHigh = 0U, /*!< HSYNC active high. */ + kLCDIFV2_DataEnableActiveHigh = 0U, /*!< Data enable line active high. */ + kLCDIFV2_DriveDataOnRisingClkEdge = 0U, /*!< Output data on rising clock edge, capture data + on falling clock edge. */ + kLCDIFV2_DataActiveHigh = 0U, /*!< Data active high. */ + + kLCDIFV2_VsyncActiveLow = LCDIFV2_CTRL_INV_VS_MASK, /*!< VSYNC active low. */ + kLCDIFV2_HsyncActiveLow = LCDIFV2_CTRL_INV_HS_MASK, /*!< HSYNC active low. */ + kLCDIFV2_DataEnableActiveLow = LCDIFV2_CTRL_INV_DE_MASK, /*!< Data enable line active low. */ + kLCDIFV2_DriveDataOnFallingClkEdge = LCDIFV2_CTRL_INV_PXCK_MASK, /*!< Output data on falling clock edge, capture + data on rising clock edge. */ + kLCDIFV2_DataActiveLow = LCDIFV2_CTRL_NEG_MASK, /*!< Data active high. */ +}; + +/*! + * @brief The LCDIF v2 interrupts. + */ +enum _lcdifv2_interrupt +{ + kLCDIFV2_Layer0FifoEmptyInterrupt = LCDIFV2_MAKE_FIFO_EMPTY_INTERRUPT(0), /*!< Layer 0 FIFO empty. */ + kLCDIFV2_Layer1FifoEmptyInterrupt = LCDIFV2_MAKE_FIFO_EMPTY_INTERRUPT(1), /*!< Layer 1 FIFO empty. */ + kLCDIFV2_Layer2FifoEmptyInterrupt = LCDIFV2_MAKE_FIFO_EMPTY_INTERRUPT(2), /*!< Layer 2 FIFO empty. */ + kLCDIFV2_Layer3FifoEmptyInterrupt = LCDIFV2_MAKE_FIFO_EMPTY_INTERRUPT(3), /*!< Layer 3 FIFO empty. */ + kLCDIFV2_Layer4FifoEmptyInterrupt = LCDIFV2_MAKE_FIFO_EMPTY_INTERRUPT(4), /*!< Layer 4 FIFO empty. */ + kLCDIFV2_Layer5FifoEmptyInterrupt = LCDIFV2_MAKE_FIFO_EMPTY_INTERRUPT(5), /*!< Layer 5 FIFO empty. */ + kLCDIFV2_Layer6FifoEmptyInterrupt = LCDIFV2_MAKE_FIFO_EMPTY_INTERRUPT(6), /*!< Layer 6 FIFO empty. */ + kLCDIFV2_Layer7FifoEmptyInterrupt = LCDIFV2_MAKE_FIFO_EMPTY_INTERRUPT(7), /*!< Layer 7 FIFO empty. */ + kLCDIFV2_Layer0DmaDoneInterrupt = LCDIFV2_MAKE_DMA_DONE_INTERRUPT(0), /*!< Layer 0 DMA done. */ + kLCDIFV2_Layer1DmaDoneInterrupt = LCDIFV2_MAKE_DMA_DONE_INTERRUPT(1), /*!< Layer 1 DMA done. */ + kLCDIFV2_Layer2DmaDoneInterrupt = LCDIFV2_MAKE_DMA_DONE_INTERRUPT(2), /*!< Layer 2 DMA done. */ + kLCDIFV2_Layer3DmaDoneInterrupt = LCDIFV2_MAKE_DMA_DONE_INTERRUPT(3), /*!< Layer 3 DMA done. */ + kLCDIFV2_Layer4DmaDoneInterrupt = LCDIFV2_MAKE_DMA_DONE_INTERRUPT(4), /*!< Layer 4 DMA done. */ + kLCDIFV2_Layer5DmaDoneInterrupt = LCDIFV2_MAKE_DMA_DONE_INTERRUPT(5), /*!< Layer 5 DMA done. */ + kLCDIFV2_Layer6DmaDoneInterrupt = LCDIFV2_MAKE_DMA_DONE_INTERRUPT(6), /*!< Layer 6 DMA done. */ + kLCDIFV2_Layer7DmaDoneInterrupt = LCDIFV2_MAKE_DMA_DONE_INTERRUPT(7), /*!< Layer 7 DMA done. */ + kLCDIFV2_Layer0DmaErrorInterrupt = LCDIFV2_MAKE_DMA_ERROR_INTERRUPT(0), /*!< Layer 0 DMA error. */ + kLCDIFV2_Layer1DmaErrorInterrupt = LCDIFV2_MAKE_DMA_ERROR_INTERRUPT(1), /*!< Layer 1 DMA error. */ + kLCDIFV2_Layer2DmaErrorInterrupt = LCDIFV2_MAKE_DMA_ERROR_INTERRUPT(2), /*!< Layer 2 DMA error. */ + kLCDIFV2_Layer3DmaErrorInterrupt = LCDIFV2_MAKE_DMA_ERROR_INTERRUPT(3), /*!< Layer 3 DMA error. */ + kLCDIFV2_Layer4DmaErrorInterrupt = LCDIFV2_MAKE_DMA_ERROR_INTERRUPT(4), /*!< Layer 4 DMA error. */ + kLCDIFV2_Layer5DmaErrorInterrupt = LCDIFV2_MAKE_DMA_ERROR_INTERRUPT(5), /*!< Layer 5 DMA error. */ + kLCDIFV2_Layer6DmaErrorInterrupt = LCDIFV2_MAKE_DMA_ERROR_INTERRUPT(6), /*!< Layer 6 DMA error. */ + kLCDIFV2_Layer7DmaErrorInterrupt = LCDIFV2_MAKE_DMA_ERROR_INTERRUPT(7), /*!< Layer 7 DMA error. */ + kLCDIFV2_VerticalBlankingInterrupt = (1U << 2U), /*!< Start of vertical blanking period. */ + kLCDIFV2_OutputUnderrunInterrupt = (1U << 1U), /*!< Output buffer underrun. */ + kLCDIFV2_VsyncEdgeInterrupt = (1U << 0U), /*!< Interrupt at VSYNC edge. */ +}; + +/*! @brief The LCDIF v2 output line order. */ +typedef enum _lcdifv2_line_order +{ + kLCDIFV2_LineOrderRGB = 0, /*!< RGB */ + kLCDIFV2_LineOrderRBG, /*!< RBG */ + kLCDIFV2_LineOrderGBR, /*!< GBR */ + kLCDIFV2_LineOrderGRB, /*!< GRB */ + kLCDIFV2_LineOrderBRG, /*!< BRG */ + kLCDIFV2_LineOrderBGR, /*!< BGR */ +} lcdifv2_line_order_t; + +/*! + * @brief LCDIF v2 display configure structure. + */ +typedef struct _lcdifv2_display_config +{ + uint16_t panelWidth; /*!< Display panel width, pixels per line. */ + uint16_t panelHeight; /*!< Display panel height, how many lines per panel. */ + uint8_t hsw; /*!< HSYNC pulse width. */ + uint8_t hfp; /*!< Horizontal front porch. */ + uint8_t hbp; /*!< Horizontal back porch. */ + uint8_t vsw; /*!< VSYNC pulse width. */ + uint8_t vfp; /*!< Vrtical front porch. */ + uint8_t vbp; /*!< Vertical back porch. */ + uint32_t polarityFlags; /*!< OR'ed value of @ref _lcdifv2_polarity_flags, used to contol the signal polarity. */ + lcdifv2_line_order_t lineOrder; /*!< Line order. */ +} lcdifv2_display_config_t; + +/*! @brief LCDIF v2 color space conversion mode. */ +typedef enum _lcdifv2_csc_mode +{ + kLCDIFV2_CscDisable = 0U, /*!< Disable the CSC. */ + kLCDIFV2_CscYUV2RGB, /*!< YUV to RGB. */ + kLCDIFV2_CscYCbCr2RGB, /*!< YCbCr to RGB. */ +} lcdifv2_csc_mode_t; + +/*! @brief LCDIF v2 pixel format. */ +typedef enum _lcdifv2_pixel_format +{ + kLCDIFV2_PixelFormatIndex1BPP = LCDIFV2_CTRLDESCL5_BPP(0U), /*!< LUT index 1 bit. */ + kLCDIFV2_PixelFormatIndex2BPP = LCDIFV2_CTRLDESCL5_BPP(1U), /*!< LUT index 2 bit. */ + kLCDIFV2_PixelFormatIndex4BPP = LCDIFV2_CTRLDESCL5_BPP(2U), /*!< LUT index 4 bit. */ + kLCDIFV2_PixelFormatIndex8BPP = LCDIFV2_CTRLDESCL5_BPP(3U), /*!< LUT index 8 bit. */ + kLCDIFV2_PixelFormatRGB565 = LCDIFV2_CTRLDESCL5_BPP(4U), /*!< RGB565, two pixels use 32 bits. */ + kLCDIFV2_PixelFormatARGB1555 = LCDIFV2_CTRLDESCL5_BPP(5U), /*!< ARGB1555, two pixels use 32 bits. */ + kLCDIFV2_PixelFormatARGB4444 = LCDIFV2_CTRLDESCL5_BPP(6U), /*!< ARGB4444, two pixels use 32 bits. */ + kLCDIFV2_PixelFormatUYVY = LCDIFV2_CTRLDESCL5_BPP(7U) | + LCDIFV2_CTRLDESCL5_YUV_FORMAT(0U), /*!< UYVY, only layer 0 and layer 1 support this. */ + kLCDIFV2_PixelFormatVYUY = LCDIFV2_CTRLDESCL5_BPP(7U) | + LCDIFV2_CTRLDESCL5_YUV_FORMAT(1U), /*!< VYUY, only layer 0 and layer 1 support this. */ + kLCDIFV2_PixelFormatYUYV = LCDIFV2_CTRLDESCL5_BPP(7U) | + LCDIFV2_CTRLDESCL5_YUV_FORMAT(2U), /*!< YUYV, only layer 0 and layer 1 support this. */ + kLCDIFV2_PixelFormatYVYU = LCDIFV2_CTRLDESCL5_BPP(7U) | + LCDIFV2_CTRLDESCL5_YUV_FORMAT(3U), /*!< YVYU, only layer 0 and layer 1 support this. */ + kLCDIFV2_PixelFormatRGB888 = LCDIFV2_CTRLDESCL5_BPP(8U), /*!< RGB888 packed, one pixel uses 24 bits. */ + kLCDIFV2_PixelFormatARGB8888 = LCDIFV2_CTRLDESCL5_BPP(9U), /*!< ARGB8888 unpacked, one pixel uses 32 bits. */ + kLCDIFV2_PixelFormatABGR8888 = LCDIFV2_CTRLDESCL5_BPP(10U), /*!< ABGR8888 unpacked, one pixel uses 32 bits. */ +} lcdifv2_pixel_format_t; + +/*! @brief LCDIF v2 source buffer configuration. */ +typedef struct _lcdifv2_buffer_config +{ + uint16_t strideBytes; /*!< Number of bytes between two vertically adjacent pixels, suggest 64-bit aligned. */ + lcdifv2_pixel_format_t pixelFormat; /*!< Source buffer pixel format. */ +} lcdifv2_buffer_config_t; + +/*! + * @brief LCDIF v2 layer alpha blending mode. + */ +typedef enum _lcdifv2_alpha_mode +{ + kLCDIFV2_AlphaDisable, /*!< Disable alpha blend. */ + kLCDIFV2_AlphaOverride, /*!< Use the gobal alpha value, pixel defined alpha value is overridden. */ + kLCDIFV2_AlphaEmbedded, /*!< Use the pixel defined alpha value. */ + kLCDIFV2_AlphaPoterDuff, /*!< Use the PoterDuff alpha blending. */ +} lcdifv2_alpha_mode_t; + +/*! + * @brief LCDIF v2 PoterDuff alpha mode. + */ +typedef enum _lcdifv2_pd_alpha_mode +{ + kLCDIFV2_PD_AlphaStraight = 0, /*!< Straight mode. */ + kLCDIFV2_PD_AlphaInversed = 1, /*!< Inversed mode. */ +} lcdifv2_pd_alpha_mode_t; + +/*! + * @brief LCDIF v2 PoterDuff color mode. + */ +typedef enum _lcdifv2_pd_color_mode +{ + kLCDIFV2_PD_ColorNoAlpha = 0, /*!< Output color directly. */ + kLCDIFV2_PD_ColorWithAlpha = 1, /*!< Output color multiples alpha. */ +} lcdifv2_pd_color_mode_t; + +/*! + * @brief LCDIF v2 PoterDuff global alpha mode. + */ +typedef enum _lcdifv2_pd_global_alpha_mode +{ + kLCDIFV2_PD_GlobalAlpha = 0, /*!< Use global alpha. */ + kLCDIFV2_PD_LocalAlpha = 1, /*!< Use local alpha. */ + kLCDIFV2_PD_ScaledAlpha = 2, /*!< Use scaled alpha. */ +} lcdifv2_pd_global_alpha_mode_t; + +/*! + * @brief LCDIF v2 PoterDuff factor mode. + */ +typedef enum _lcdifv2_pd_factor_mode +{ + kLCDIFV2_PD_FactorOne = 0, /*!< Use 1. */ + kLCDIFV2_PD_FactorZero = 1, /*!< Use 0. */ + kLCDIFV2_PD_FactorStraightAlpha = 2, /*!< Use straight alpha. */ + kLCDIFV2_PD_FactorInversedAlpha = 3, /*!< Use inversed alpha. */ +} lcdifv2_pd_factor_mode_t; + +/*! + * @brief LCDIF v2 layer alpha blending configuration. + */ +typedef struct _lcdifv2_blend_config +{ + uint8_t globalAlpha; /*!< Global alpha value, only used when + @ref alphaMode is @ref kLCDIFV2_AlphaOverride or + @ref kLCDIFV2_AlphaPoterDuff */ + lcdifv2_alpha_mode_t alphaMode; /*!< Alpha mode. */ + lcdifv2_pd_alpha_mode_t pdAlphaMode; /*!< PoterDuff alpha mode, only used when @ref alphaMode is @ref + kLCDIFV2_AlphaPoterDuff */ + lcdifv2_pd_color_mode_t pdColorMode; /*!< PoterDuff color mode, only used when @ref alphaMode is @ref + kLCDIFV2_AlphaPoterDuff */ + lcdifv2_pd_global_alpha_mode_t pdGlobalAlphaMode; /*!< PoterDuff global alpha mode, only used when @ref alphaMode is + @ref kLCDIFV2_AlphaPoterDuff */ + lcdifv2_pd_factor_mode_t pdFactorMode; /*!< PoterDuff factor mode, only used when @ref alphaMode is @ref + kLCDIFV2_AlphaPoterDuff */ +} lcdifv2_blend_config_t; + +/*! @brief LCDIFv2 Porter Duff blend mode. Note: Don't change the enum item value */ +typedef enum _lcdifv2_pd_blend_mode +{ + kLCDIFV2_PD_Src = 0, /*!< Source Only */ + kLCDIFV2_PD_Atop, /*!< Source Atop */ + kLCDIFV2_PD_Over, /*!< Source Over */ + kLCDIFV2_PD_In, /*!< Source In. */ + kLCDIFV2_PD_Out, /*!< Source Out. */ + kLCDIFV2_PD_Dst, /*!< Destination Only. */ + kLCDIFV2_PD_DstAtop, /*!< Destination Atop. */ + kLCDIFV2_PD_DstOver, /*!< Destination Over. */ + kLCDIFV2_PD_DstIn, /*!< Destination In. */ + kLCDIFV2_PD_DstOut, /*!< Destination Out. */ + kLCDIFV2_PD_Xor, /*!< XOR. */ + kLCDIFV2_PD_Clear, /*!< Clear. */ + kLCDIFV2_PD_Max, /*!< Used for boarder detection. */ +} lcdifv2_pd_blend_mode_t; + +/*! @brief LCDIFv2 Porter Duff layer. Note: Don't change the enum item value */ +typedef enum _lcdifv2_pd_layer +{ + kLCDIFV2_PD_SrcLayer = 0, /*!< Source layer. */ + kLCDIFV2_PD_DestLayer = 1, /*!< Destination layer. */ + kLCDIFV2_PD_LayerMax = 2, /*!< Used for boarder detection. */ +} lcdifv2_pd_layer_t; + +/******************************************************************************* + * APIs + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus */ + +/*! + * @name LCDIF v2 initialization and de-initialization + * @{ + */ + +/*! + * @brief Initializes the LCDIF v2. + * + * This function ungates the LCDIF v2 clock and release the peripheral reset. + * + * @param base LCDIF v2 peripheral base address. + */ +void LCDIFV2_Init(LCDIFV2_Type *base); + +/*! + * @brief Deinitializes the LCDIF peripheral. + * + * @param base LCDIF peripheral base address. + */ +void LCDIFV2_Deinit(LCDIFV2_Type *base); + +/*! + * @brief Reset the LCDIF v2. + * + * @param base LCDIF peripheral base address. + */ +void LCDIFV2_Reset(LCDIFV2_Type *base); + +/* @} */ + +/*! + * @name Display + * @{ + */ + +/*! + * @brief Gets the LCDIF display default configuration structure. + * + * This function sets the configuration structure to default values. + * The default configuration is set to the following values. + * @code + config->panelWidth = 0U; + config->panelHeight = 0U; + config->hsw = 3U; + config->hfp = 3U; + config->hbp = 3U; + config->vsw = 3U; + config->vfp = 3U; + config->vbp = 3U; + config->polarityFlags = kLCDIFV2_VsyncActiveHigh | kLCDIFV2_HsyncActiveHigh | kLCDIFV2_DataEnableActiveHigh | + kLCDIFV2_DriveDataOnRisingClkEdge | kLCDIFV2_DataActiveHigh; + config->lineOrder = kLCDIFV2_LineOrderRGB; + @endcode + * + * @param config Pointer to the LCDIF configuration structure. + */ +void LCDIFV2_DisplayGetDefaultConfig(lcdifv2_display_config_t *config); + +/*! + * @brief Set the LCDIF v2 display configurations. + * + * @param base LCDIF peripheral base address. + * @param config Pointer to the LCDIF configuration structure. + */ +void LCDIFV2_SetDisplayConfig(LCDIFV2_Type *base, const lcdifv2_display_config_t *config); + +/*! + * @brief Enable or disable the display + * + * @param base LCDIF peripheral base address. + * @param enable Enable or disable. + */ +static inline void LCDIFV2_EnableDisplay(LCDIFV2_Type *base, bool enable) +{ + if (enable) + { + base->DISP_PARA |= LCDIFV2_DISP_PARA_DISP_ON_MASK; + } + else + { + base->DISP_PARA &= ~LCDIFV2_DISP_PARA_DISP_ON_MASK; + } +} + +/* @} */ + +/*! + * @name Interrupts + * @{ + */ + +/*! + * @brief Enables LCDIF interrupt requests. + * + * @param base LCDIF peripheral base address. + * @param domain CPU domain the interrupt signal routed to. + * @param mask interrupt source, OR'ed value of _lcdifv2_interrupt. + */ +static inline void LCDIFV2_EnableInterrupts(LCDIFV2_Type *base, uint8_t domain, uint32_t mask) +{ + base->INT[domain].INT_ENABLE |= mask; +} + +/*! + * @brief Disables LCDIF interrupt requests. + * + * @param base LCDIF peripheral base address. + * @param domain CPU domain the interrupt signal routed to. + * @param mask interrupt source, OR'ed value of _lcdifv2_interrupt. + */ +static inline void LCDIFV2_DisableInterrupts(LCDIFV2_Type *base, uint8_t domain, uint32_t mask) +{ + base->INT[domain].INT_ENABLE &= ~mask; +} + +/*! + * @brief Get LCDIF interrupt peding status. + * + * @param base LCDIF peripheral base address. + * @param domain CPU domain the interrupt signal routed to. + * @return Interrupt pending status, OR'ed value of _lcdifv2_interrupt. + */ +static inline uint32_t LCDIFV2_GetInterruptStatus(LCDIFV2_Type *base, uint8_t domain) +{ + return base->INT[domain].INT_STATUS; +} + +/*! + * @brief Clear LCDIF interrupt peding status. + * + * @param base LCDIF peripheral base address. + * @param domain CPU domain the interrupt signal routed to. + * @param mask of the flags to clear, OR'ed value of _lcdifv2_interrupt. + */ +static inline void LCDIFV2_ClearInterruptStatus(LCDIFV2_Type *base, uint8_t domain, uint32_t mask) +{ + base->INT[domain].INT_STATUS = mask; +} + +/* @} */ + +/*! + * @name LUT + * @{ + */ + +/*! + * @brief Set the LUT data. + * + * This function sets the specific layer LUT data, if @p useShadowLoad is true, + * call @ref LCDIFV2_TriggerLayerShadowLoad after this function, the + * LUT will be loaded to the hardware during next vertical blanking period. + * If @p useShadowLoad is false, the LUT data is loaded to hardware directly. + * + * @param base LCDIF v2 peripheral base address. + * @param layerIndex Which layer to set. + * @param lutData The LUT data to load. + * @param count Count of @p lutData. + * @param useShadowLoad Use shadow load. + * @retval kStatus_Success Set success. + * @retval kStatus_Fail Previous LUT data is not loaded to hardware yet. + */ +status_t LCDIFV2_SetLut( + LCDIFV2_Type *base, uint8_t layerIndex, const uint32_t *lutData, uint16_t count, bool useShadowLoad); + +/* @} */ + +/*! + * @name Layer operation + * @{ + */ + +/*! + * @brief Set the layer dimension. + * + * @param base LCDIFv2 peripheral base address. + * @param layerIndex Layer layerIndex. + * @param width Layer width in pixel. + * @param height Layer height. + * + * @note The layer width must be in multiples of the number of pixels that can be stored in 32 bits + */ +static inline void LCDIFV2_SetLayerSize(LCDIFV2_Type *base, uint8_t layerIndex, uint16_t width, uint16_t height) +{ + base->LAYER[layerIndex].CTRLDESCL1 = + ((uint32_t)height << LCDIFV2_CTRLDESCL1_HEIGHT_SHIFT) | ((uint32_t)width << LCDIFV2_CTRLDESCL1_WIDTH_SHIFT); +} + +/*! + * @brief Set the layer position in output frame. + * + * @param base LCDIFv2 peripheral base address. + * @param layerIndex Layer layerIndex. + * @param offsetX Horizontal offset, start from 0. + * @param offsetY Vertical offset, start from 0. + */ +static inline void LCDIFV2_SetLayerOffset(LCDIFV2_Type *base, uint8_t layerIndex, uint16_t offsetX, uint16_t offsetY) +{ + base->LAYER[layerIndex].CTRLDESCL2 = + ((uint32_t)offsetX << LCDIFV2_CTRLDESCL2_POSX_SHIFT) | ((uint32_t)offsetY << LCDIFV2_CTRLDESCL2_POSY_SHIFT); +} + +/*! + * @brief Set the layer source buffer configuration. + * + * @param base LCDIFv2 peripheral base address. + * @param layerIndex Layer layerIndex. + * @param config Pointer to the configuration. + */ +void LCDIFV2_SetLayerBufferConfig(LCDIFV2_Type *base, uint8_t layerIndex, const lcdifv2_buffer_config_t *config); + +/*! + * @brief Set the layer source buffer address. + * + * This function is used for fast runtime source buffer change. + * + * @param base LCDIFv2 peripheral base address. + * @param layerIndex Layer layerIndex. + * @param addr The new source buffer address passed to the layer, should be 64-bit aligned. + */ +static inline void LCDIFV2_SetLayerBufferAddr(LCDIFV2_Type *base, uint8_t layerIndex, uint32_t addr) +{ + base->LAYER[layerIndex].CTRLDESCL4 = LCDIFV2_ADDR_CPU_2_IP(addr); +} + +/*! + * @brief Enable or disable the layer. + * + * @param base LCDIFv2 peripheral base address. + * @param layerIndex Layer layerIndex. + * @param enable Pass in true to enable, false to disable. + */ +static inline void LCDIFV2_EnableLayer(LCDIFV2_Type *base, uint8_t layerIndex, bool enable) +{ + if (enable) + { + base->LAYER[layerIndex].CTRLDESCL5 |= LCDIFV2_CTRLDESCL5_EN_MASK; + } + else + { + base->LAYER[layerIndex].CTRLDESCL5 &= ~LCDIFV2_CTRLDESCL5_EN_MASK; + } +} + +/*! + * @brief Trigger the layer configuration shadow load. + * + * The new layer configurations are written to the shadow registers first, + * When all configurations written finished, call this function, then shadowed + * control registers are updated to the active control registers on VSYNC of + * next frame. + * + * @param base LCDIFv2 peripheral base address. + * @param layerIndex Layer layerIndex. + */ +static inline void LCDIFV2_TriggerLayerShadowLoad(LCDIFV2_Type *base, uint8_t layerIndex) +{ + base->LAYER[layerIndex].CTRLDESCL5 |= LCDIFV2_CTRLDESCL5_SHADOW_LOAD_EN_MASK; +} + +/*! + * @brief Set the layer back ground color. + * + * The back ground color is used when layer not actived. + * + * @param base LCDIFv2 peripheral base address. + * @param layerIndex Index of the layer. + * @param backGroundColor Background color to use when this layer is not active. + */ +static inline void LCDIFV2_SetLayerBackGroundColor(LCDIFV2_Type *base, uint8_t layerIndex, uint32_t backGroundColor) +{ + base->LAYER[layerIndex].CTRLDESCL6 = backGroundColor; +} + +/*! + * @brief Set the layer alpha blend mode. + * + * @param base LCDIFv2 peripheral base address. + * @param layerIndex Index of the CSC unit. + * @param config Pointer to the blend configuration. + */ +void LCDIFV2_SetLayerBlendConfig(LCDIFV2_Type *base, uint8_t layerIndex, const lcdifv2_blend_config_t *config); + +/*! + * @brief Set the color space conversion mode. + * + * Supports YUV2RGB and YCbCr2RGB. + * + * @param base LCDIFv2 peripheral base address. + * @param layerIndex Index of the layer. + * @param mode The conversion mode. + */ +void LCDIFV2_SetCscMode(LCDIFV2_Type *base, uint8_t layerIndex, lcdifv2_csc_mode_t mode); + +/* @} */ + +/*! + * @name Porter Duff + * @{ + */ + +/*! + * @brief Get the blend configuration for Porter Duff blend. + * + * This function gets the blend configuration for Porter Duff blend, + * config->pdFactorMode is set according to @p layer and @p mode, + * other blend configurations are set to: + * + * @code + config->pdAlphaMode = kLCDIFV2_PD_AlphaStraight; + config->pdColorMode = kLCDIFV2_PD_ColorStraight; + config->pdGlobalAlphaMode = kLCDIFV2_PD_LocalAlpha; + config->alphaMode = kLCDIFV2_AlphaPoterDuff; + @endcode + * + * This is the basic Porter Duff blend configuration, user still could + * modify the configurations after this function. + * + * @param mode Porter Duff blend mode. + * @param layer The configuration for source layer or destination layer. + * @param config Pointer to the configuration. + * @retval kStatus_Success Get the configuration successfully. + * @retval kStatus_InvalidArgument The argument is invalid. + */ +status_t LCDIFV2_GetPorterDuffConfig(lcdifv2_pd_blend_mode_t mode, + lcdifv2_pd_layer_t layer, + lcdifv2_blend_config_t *config); + +/* @} */ + +/*! + * @name Misc + * @{ + */ + +/*! + * @brief Get the global alpha values for multiple layer blend. + * + * This function calculates the global alpha value for each layer based on the + * desired blended alpha. + * + * When all layers use the global alpha, the relationship of blended alpha + * and global alpha of each layer is: + * + * Layer 7: ba7 = ga7 + * Layer 6: ba6 = ga6 * (1-ga7) + * Layer 5: ba5 = ga5 * (1-ga6) * (1-ga7) + * Layer 4: ba4 = ga4 * (1-ga5) * (1-ga6) * (1-ga7) + * Layer 3: ba3 = ga3 * (1-ga4) * (1-ga5) * (1-ga6) * (1-ga7) + * Layer 2: ba2 = ga2 * (1-ga3) * (1-ga4) * (1-ga5) * (1-ga6) * (1-ga7) + * Layer 1: ba1 = ga1 * (1-ga2) * (1-ga3) * (1-ga4) * (1-ga5) * (1-ga6) * (1-ga7) + * Layer 0: ba0 = 1 * (1-ga1) * (1-ga2) * (1-ga3) * (1-ga4) * (1-ga5) * (1-ga6) * (1-ga7) + * + * Here baN is the blended alpha of layer N, gaN is the global alpha configured to layer N. + * + * This function calculates the global alpha based on the blended alpha. The @p blendedAlpha and + * @p globalAlpha are all arrays of size @p layerCount. The first layer is a background layer, + * so blendedAlpha[0] is useless, globalAlpha[0] is always 255. + * + * @param[in] blendedAlpha The desired blended alpha value, alpha range 0~255. + * @param[out] globalAlpha Calculated global alpha set to each layer register. + * @param[in] layerCount Total layer count. + * @retval kStatus_Success Get successfully. + * @retval kStatus_InvalidArgument The argument is invalid. + */ +status_t LCDIFV2_GetMultiLayerGlobalAlpha(const uint8_t blendedAlpha[], uint8_t globalAlpha[], uint8_t layerCount); + +/* @} */ + +#if defined(__cplusplus) +} +#endif /* __cplusplus */ + +/* @} */ + +#endif /*_FSL_LCDIFV2_H_*/ |