diff options
Diffstat (limited to 'bsps/arm/imxrt/boards/saltshaker/dcd.c')
| -rw-r--r-- | bsps/arm/imxrt/boards/saltshaker/dcd.c | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/bsps/arm/imxrt/boards/saltshaker/dcd.c b/bsps/arm/imxrt/boards/saltshaker/dcd.c new file mode 100644 index 0000000000..94c51ff4bb --- /dev/null +++ b/bsps/arm/imxrt/boards/saltshaker/dcd.c @@ -0,0 +1,310 @@ +/* + * Copyright 2017-2023 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#include "dcd.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.dcd_data"), used)) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.dcd_data" +#endif + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: DCDx v3.0 +processor: MIMXRT1166xxxxx +package_id: MIMXRT1166DVM6A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +output_format: c_array + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* COMMENTS BELOW ARE USED AS SETTINGS FOR DCD DATA */ +const uint8_t dcd_data[] = { + /* HEADER */ + /* Tag */ + 0xD2, + /* Image Length */ + 0x03, 0x98, + /* Version */ + 0x41, + + /* COMMANDS */ + + /* group: 'SDRAM Initialization' */ + /* #1.1-93, command header bytes for merged 'Write - value' command */ + 0xCC, 0x02, 0xEC, 0x04, + /* #1.1, command: write_value, address: CCM_CLOCK_ROOT4_CONTROL, value: 0x703, size: 4, comment: 'SEMC_CLKROOT = SYS_PLL2_PFD1 / 2' */ + 0x40, 0xCC, 0x02, 0x00, 0x00, 0x00, 0x07, 0x03, + /* #1.2, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_09, value: 0x00, size: 4, comment: 'SEMC_ADDR00' */ + 0x40, 0x0E, 0x80, 0x34, 0x00, 0x00, 0x00, 0x00, + /* #1.3, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_10, value: 0x00, size: 4, comment: 'SEMC_ADDR01' */ + 0x40, 0x0E, 0x80, 0x38, 0x00, 0x00, 0x00, 0x00, + /* #1.4, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_11, value: 0x00, size: 4, comment: 'SEMC_ADDR02' */ + 0x40, 0x0E, 0x80, 0x3C, 0x00, 0x00, 0x00, 0x00, + /* #1.5, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_12, value: 0x00, size: 4, comment: 'SEMC_ADDR03' */ + 0x40, 0x0E, 0x80, 0x40, 0x00, 0x00, 0x00, 0x00, + /* #1.6, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_13, value: 0x00, size: 4, comment: 'SEMC_ADDR04' */ + 0x40, 0x0E, 0x80, 0x44, 0x00, 0x00, 0x00, 0x00, + /* #1.7, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_14, value: 0x00, size: 4, comment: 'SEMC_ADDR05' */ + 0x40, 0x0E, 0x80, 0x48, 0x00, 0x00, 0x00, 0x00, + /* #1.8, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_15, value: 0x00, size: 4, comment: 'SEMC_ADDR06' */ + 0x40, 0x0E, 0x80, 0x4C, 0x00, 0x00, 0x00, 0x00, + /* #1.9, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_16, value: 0x00, size: 4, comment: 'SEMC_ADDR07' */ + 0x40, 0x0E, 0x80, 0x50, 0x00, 0x00, 0x00, 0x00, + /* #1.10, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_17, value: 0x00, size: 4, comment: 'SEMC_ADDR08' */ + 0x40, 0x0E, 0x80, 0x54, 0x00, 0x00, 0x00, 0x00, + /* #1.11, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_18, value: 0x00, size: 4, comment: 'SEMC_ADDR09' */ + 0x40, 0x0E, 0x80, 0x58, 0x00, 0x00, 0x00, 0x00, + /* #1.12, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_23, value: 0x00, size: 4, comment: 'SEMC_ADDR10' */ + 0x40, 0x0E, 0x80, 0x6C, 0x00, 0x00, 0x00, 0x00, + /* #1.13, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_19, value: 0x00, size: 4, comment: 'SEMC_ADDR11' */ + 0x40, 0x0E, 0x80, 0x5C, 0x00, 0x00, 0x00, 0x00, + /* #1.14, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_20, value: 0x00, size: 4, comment: 'SEMC_ADDR12' */ + 0x40, 0x0E, 0x80, 0x60, 0x00, 0x00, 0x00, 0x00, + /* #1.15, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_21, value: 0x00, size: 4, comment: 'SEMC_BA0' */ + 0x40, 0x0E, 0x80, 0x64, 0x00, 0x00, 0x00, 0x00, + /* #1.16, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_22, value: 0x00, size: 4, comment: 'SEMC_BA1' */ + 0x40, 0x0E, 0x80, 0x68, 0x00, 0x00, 0x00, 0x00, + /* #1.17, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_27, value: 0x00, size: 4, comment: 'SEMC_CKE' */ + 0x40, 0x0E, 0x80, 0x7C, 0x00, 0x00, 0x00, 0x00, + /* #1.18, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_26, value: 0x00, size: 4, comment: 'SEMC_CLK' */ + 0x40, 0x0E, 0x80, 0x78, 0x00, 0x00, 0x00, 0x00, + /* #1.19, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_29, value: 0x00, size: 4, comment: 'SEMC_CS0' */ + 0x40, 0x0E, 0x80, 0x84, 0x00, 0x00, 0x00, 0x00, + /* #1.20, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_28, value: 0x00, size: 4, comment: 'SEMC_WE' */ + 0x40, 0x0E, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, + /* #1.21, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_24, value: 0x00, size: 4, comment: 'SEMC_CAS' */ + 0x40, 0x0E, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00, + /* #1.22, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_25, value: 0x00, size: 4, comment: 'SEMC_RAS' */ + 0x40, 0x0E, 0x80, 0x74, 0x00, 0x00, 0x00, 0x00, + /* #1.23, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_08, value: 0x00, size: 4, comment: 'SEMC_DM00' */ + 0x40, 0x0E, 0x80, 0x30, 0x00, 0x00, 0x00, 0x00, + /* #1.24, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_38, value: 0x00, size: 4, comment: 'SEMC_DM01' */ + 0x40, 0x0E, 0x80, 0xA8, 0x00, 0x00, 0x00, 0x00, + /* #1.25, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_00, value: 0x00, size: 4, comment: 'SEMC_DATA00' */ + 0x40, 0x0E, 0x80, 0x10, 0x00, 0x00, 0x00, 0x00, + /* #1.26, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_01, value: 0x00, size: 4, comment: 'SEMC_DATA01' */ + 0x40, 0x0E, 0x80, 0x14, 0x00, 0x00, 0x00, 0x00, + /* #1.27, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_02, value: 0x00, size: 4, comment: 'SEMC_DATA02' */ + 0x40, 0x0E, 0x80, 0x18, 0x00, 0x00, 0x00, 0x00, + /* #1.28, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_03, value: 0x00, size: 4, comment: 'SEMC_DATA03' */ + 0x40, 0x0E, 0x80, 0x1C, 0x00, 0x00, 0x00, 0x00, + /* #1.29, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_04, value: 0x00, size: 4, comment: 'SEMC_DATA04' */ + 0x40, 0x0E, 0x80, 0x20, 0x00, 0x00, 0x00, 0x00, + /* #1.30, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_05, value: 0x00, size: 4, comment: 'SEMC_DATA05' */ + 0x40, 0x0E, 0x80, 0x24, 0x00, 0x00, 0x00, 0x00, + /* #1.31, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_06, value: 0x00, size: 4, comment: 'SEMC_DATA06' */ + 0x40, 0x0E, 0x80, 0x28, 0x00, 0x00, 0x00, 0x00, + /* #1.32, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_07, value: 0x00, size: 4, comment: 'SEMC_DATA07' */ + 0x40, 0x0E, 0x80, 0x2C, 0x00, 0x00, 0x00, 0x00, + /* #1.33, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_30, value: 0x00, size: 4, comment: 'SEMC_DATA08' */ + 0x40, 0x0E, 0x80, 0x88, 0x00, 0x00, 0x00, 0x00, + /* #1.34, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_31, value: 0x00, size: 4, comment: 'SEMC_DATA09' */ + 0x40, 0x0E, 0x80, 0x8C, 0x00, 0x00, 0x00, 0x00, + /* #1.35, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_32, value: 0x00, size: 4, comment: 'SEMC_DATA10' */ + 0x40, 0x0E, 0x80, 0x90, 0x00, 0x00, 0x00, 0x00, + /* #1.36, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_33, value: 0x00, size: 4, comment: 'SEMC_DATA11' */ + 0x40, 0x0E, 0x80, 0x94, 0x00, 0x00, 0x00, 0x00, + /* #1.37, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_34, value: 0x00, size: 4, comment: 'SEMC_DATA12' */ + 0x40, 0x0E, 0x80, 0x98, 0x00, 0x00, 0x00, 0x00, + /* #1.38, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_35, value: 0x00, size: 4, comment: 'SEMC_DATA13' */ + 0x40, 0x0E, 0x80, 0x9C, 0x00, 0x00, 0x00, 0x00, + /* #1.39, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_36, value: 0x00, size: 4, comment: 'SEMC_DATA14' */ + 0x40, 0x0E, 0x80, 0xA0, 0x00, 0x00, 0x00, 0x00, + /* #1.40, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_37, value: 0x00, size: 4, comment: 'SEMC_DATA15' */ + 0x40, 0x0E, 0x80, 0xA4, 0x00, 0x00, 0x00, 0x00, + /* #1.41, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_39, value: 0x10, size: 4, comment: 'SEMC_DQS' */ + 0x40, 0x0E, 0x80, 0xAC, 0x00, 0x00, 0x00, 0x10, + /* #1.42, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_09, value: 0x08, size: 4, comment: 'SEMC_ADDR00' */ + 0x40, 0x0E, 0x82, 0x78, 0x00, 0x00, 0x00, 0x08, + /* #1.43, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_10, value: 0x08, size: 4, comment: 'SEMC_ADDR01' */ + 0x40, 0x0E, 0x82, 0x7C, 0x00, 0x00, 0x00, 0x08, + /* #1.44, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_11, value: 0x08, size: 4, comment: 'SEMC_ADDR02' */ + 0x40, 0x0E, 0x82, 0x80, 0x00, 0x00, 0x00, 0x08, + /* #1.45, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_12, value: 0x08, size: 4, comment: 'SEMC_ADDR03' */ + 0x40, 0x0E, 0x82, 0x84, 0x00, 0x00, 0x00, 0x08, + /* #1.46, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_13, value: 0x08, size: 4, comment: 'SEMC_ADDR04' */ + 0x40, 0x0E, 0x82, 0x88, 0x00, 0x00, 0x00, 0x08, + /* #1.47, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_14, value: 0x08, size: 4, comment: 'SEMC_ADDR05' */ + 0x40, 0x0E, 0x82, 0x8C, 0x00, 0x00, 0x00, 0x08, + /* #1.48, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_15, value: 0x08, size: 4, comment: 'SEMC_ADDR06' */ + 0x40, 0x0E, 0x82, 0x90, 0x00, 0x00, 0x00, 0x08, + /* #1.49, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_16, value: 0x08, size: 4, comment: 'SEMC_ADDR07' */ + 0x40, 0x0E, 0x82, 0x94, 0x00, 0x00, 0x00, 0x08, + /* #1.50, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_17, value: 0x08, size: 4, comment: 'SEMC_ADDR08' */ + 0x40, 0x0E, 0x82, 0x98, 0x00, 0x00, 0x00, 0x08, + /* #1.51, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_18, value: 0x08, size: 4, comment: 'SEMC_ADDR09' */ + 0x40, 0x0E, 0x82, 0x9C, 0x00, 0x00, 0x00, 0x08, + /* #1.52, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_23, value: 0x08, size: 4, comment: 'SEMC_ADDR10' */ + 0x40, 0x0E, 0x82, 0xB0, 0x00, 0x00, 0x00, 0x08, + /* #1.53, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_19, value: 0x08, size: 4, comment: 'SEMC_ADDR11' */ + 0x40, 0x0E, 0x82, 0xA0, 0x00, 0x00, 0x00, 0x08, + /* #1.54, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_20, value: 0x08, size: 4, comment: 'SEMC_ADDR12' */ + 0x40, 0x0E, 0x82, 0xA4, 0x00, 0x00, 0x00, 0x08, + /* #1.55, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_21, value: 0x08, size: 4, comment: 'SEMC_BA0' */ + 0x40, 0x0E, 0x82, 0xA8, 0x00, 0x00, 0x00, 0x08, + /* #1.56, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_22, value: 0x08, size: 4, comment: 'SEMC_BA1' */ + 0x40, 0x0E, 0x82, 0xAC, 0x00, 0x00, 0x00, 0x08, + /* #1.57, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_27, value: 0x08, size: 4, comment: 'SEMC_CKE' */ + 0x40, 0x0E, 0x82, 0xC0, 0x00, 0x00, 0x00, 0x08, + /* #1.58, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_26, value: 0x08, size: 4, comment: 'SEMC_CLK' */ + 0x40, 0x0E, 0x82, 0xBC, 0x00, 0x00, 0x00, 0x08, + /* #1.59, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_29, value: 0x04, size: 4, comment: 'SEMC_CS0' */ + 0x40, 0x0E, 0x82, 0xC8, 0x00, 0x00, 0x00, 0x04, + /* #1.60, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_28, value: 0x08, size: 4, comment: 'SEMC_WE' */ + 0x40, 0x0E, 0x82, 0xC4, 0x00, 0x00, 0x00, 0x08, + /* #1.61, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_24, value: 0x08, size: 4, comment: 'SEMC_CAS' */ + 0x40, 0x0E, 0x82, 0xB4, 0x00, 0x00, 0x00, 0x08, + /* #1.62, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_25, value: 0x08, size: 4, comment: 'SEMC_RAS' */ + 0x40, 0x0E, 0x82, 0xB8, 0x00, 0x00, 0x00, 0x08, + /* #1.63, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_08, value: 0x08, size: 4, comment: 'SEMC_DM00' */ + 0x40, 0x0E, 0x82, 0x74, 0x00, 0x00, 0x00, 0x08, + /* #1.64, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_38, value: 0x08, size: 4, comment: 'SEMC_DM01' */ + 0x40, 0x0E, 0x82, 0xEC, 0x00, 0x00, 0x00, 0x08, + /* #1.65, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_00, value: 0x08, size: 4, comment: 'SEMC_DATA00' */ + 0x40, 0x0E, 0x82, 0x54, 0x00, 0x00, 0x00, 0x08, + /* #1.66, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_01, value: 0x08, size: 4, comment: 'SEMC_DATA01' */ + 0x40, 0x0E, 0x82, 0x58, 0x00, 0x00, 0x00, 0x08, + /* #1.67, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_02, value: 0x08, size: 4, comment: 'SEMC_DATA02' */ + 0x40, 0x0E, 0x82, 0x5C, 0x00, 0x00, 0x00, 0x08, + /* #1.68, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_03, value: 0x08, size: 4, comment: 'SEMC_DATA03' */ + 0x40, 0x0E, 0x82, 0x60, 0x00, 0x00, 0x00, 0x08, + /* #1.69, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_04, value: 0x08, size: 4, comment: 'SEMC_DATA04' */ + 0x40, 0x0E, 0x82, 0x64, 0x00, 0x00, 0x00, 0x08, + /* #1.70, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_05, value: 0x08, size: 4, comment: 'SEMC_DATA05' */ + 0x40, 0x0E, 0x82, 0x68, 0x00, 0x00, 0x00, 0x08, + /* #1.71, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_06, value: 0x08, size: 4, comment: 'SEMC_DATA06' */ + 0x40, 0x0E, 0x82, 0x6C, 0x00, 0x00, 0x00, 0x08, + /* #1.72, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_07, value: 0x08, size: 4, comment: 'SEMC_DATA07' */ + 0x40, 0x0E, 0x82, 0x70, 0x00, 0x00, 0x00, 0x08, + /* #1.73, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_30, value: 0x08, size: 4, comment: 'SEMC_DATA08' */ + 0x40, 0x0E, 0x82, 0xCC, 0x00, 0x00, 0x00, 0x08, + /* #1.74, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_31, value: 0x08, size: 4, comment: 'SEMC_DATA09' */ + 0x40, 0x0E, 0x82, 0xD0, 0x00, 0x00, 0x00, 0x08, + /* #1.75, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_32, value: 0x08, size: 4, comment: 'SEMC_DATA10' */ + 0x40, 0x0E, 0x82, 0xD4, 0x00, 0x00, 0x00, 0x08, + /* #1.76, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_33, value: 0x08, size: 4, comment: 'SEMC_DATA11' */ + 0x40, 0x0E, 0x82, 0xD8, 0x00, 0x00, 0x00, 0x08, + /* #1.77, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_34, value: 0x08, size: 4, comment: 'SEMC_DATA12' */ + 0x40, 0x0E, 0x82, 0xDC, 0x00, 0x00, 0x00, 0x08, + /* #1.78, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_35, value: 0x08, size: 4, comment: 'SEMC_DATA13' */ + 0x40, 0x0E, 0x82, 0xE0, 0x00, 0x00, 0x00, 0x08, + /* #1.79, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_36, value: 0x08, size: 4, comment: 'SEMC_DATA14' */ + 0x40, 0x0E, 0x82, 0xE4, 0x00, 0x00, 0x00, 0x08, + /* #1.80, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_37, value: 0x08, size: 4, comment: 'SEMC_DATA15' */ + 0x40, 0x0E, 0x82, 0xE8, 0x00, 0x00, 0x00, 0x08, + /* #1.81, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_39, value: 0x08, size: 4, comment: 'SEMC_DQS' */ + 0x40, 0x0E, 0x82, 0xF0, 0x00, 0x00, 0x00, 0x08, + /* #1.82, command: write_value, address: SEMC_MCR, value: 0x1FFF0004, size: 4, comment: 'Default values from SEMC_GetDefaultConfig' */ + 0x40, 0x0D, 0x40, 0x00, 0x1F, 0xFF, 0x00, 0x04, + /* #1.83, command: write_value, address: SEMC_BMCR0, value: 0x104085, size: 4, comment: 'Default values from SEMC_GetDefaultConfig' */ + 0x40, 0x0D, 0x40, 0x08, 0x00, 0x10, 0x40, 0x85, + /* #1.84, command: write_value, address: SEMC_BMCR1, value: 0x40246085, size: 4, comment: 'Default values from SEMC_GetDefaultConfig' */ + 0x40, 0x0D, 0x40, 0x0C, 0x40, 0x24, 0x60, 0x85, + /* #1.85, command: write_value, address: SEMC_BR0, value: 0x8000001D, size: 4, comment: 'CS0: Start add Address 0x80000000; Memsize 64MByte' */ + 0x40, 0x0D, 0x40, 0x10, 0x80, 0x00, 0x00, 0x1D, + /* #1.86, command: write_value, address: SEMC_SDRAMCR0, value: 0xF35, size: 4, comment: 'PortSize 16; Burst Len 8; 9 Bit Column Addresses; CAS Latency 3' */ + 0x40, 0x0D, 0x40, 0x40, 0x00, 0x00, 0x0F, 0x35, + /* #1.87, command: write_value, address: SEMC_SDRAMCR1, value: 0x00664B22, size: 4, comment: 'PRE2ACT: tRP = 18ns; ACT2RW: tRCD = 18ns; RFRC: tRFC=72ns; WRC: tWR=15ns; CKEOFF: tRAS_min = 42ns; ACT2PRE: tRAS_min = 42ns' */ + 0x40, 0x0D, 0x40, 0x44, 0x00, 0x66, 0x4B, 0x22, + /* #1.88, command: write_value, address: SEMC_SDRAMCR2, value: 0x00090B13, size: 4, comment: 'SRCC: tXSR=120ns; REF2REF: tRFC=72ns; ACT2ACT: tRC=60ns' */ + 0x40, 0x0D, 0x40, 0x48, 0x00, 0x09, 0x0B, 0x13, + /* #1.89, command: write_value, address: SEMC_SDRAMCR3, value: 0x8070A00, size: 4, comment: 'Default values from NXP examples for SEMC' */ + 0x40, 0x0D, 0x40, 0x4C, 0x08, 0x07, 0x0A, 0x00, + /* #1.90, command: write_value, address: SEMC_IPCR0, value: 0x80000000, size: 4 */ + 0x40, 0x0D, 0x40, 0x90, 0x80, 0x00, 0x00, 0x00, + /* #1.91, command: write_value, address: SEMC_IPCR1, value: 0x02, size: 4 */ + 0x40, 0x0D, 0x40, 0x94, 0x00, 0x00, 0x00, 0x02, + /* #1.92, command: write_value, address: SEMC_IPCR2, value: 0x00, size: 4 */ + 0x40, 0x0D, 0x40, 0x98, 0x00, 0x00, 0x00, 0x00, + /* #1.93, command: write_value, address: SEMC_IPCMD, value: 0xA55A000F, size: 4, comment: 'IP Command: Precharge All' */ + 0x40, 0x0D, 0x40, 0x9C, 0xA5, 0x5A, 0x00, 0x0F, + /* #2, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #3, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #4, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #5, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #6, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #7.1-2, command header bytes for merged 'Write - value' command */ + 0xCC, 0x00, 0x14, 0x04, + /* #7.1, command: write_value, address: SEMC_INTR, value: 0x03, size: 4 */ + 0x40, 0x0D, 0x40, 0x3C, 0x00, 0x00, 0x00, 0x03, + /* #7.2, command: write_value, address: SEMC_IPCMD, value: 0xA55A000C, size: 4, comment: 'IP Command: Auto Refresh' */ + 0x40, 0x0D, 0x40, 0x9C, 0xA5, 0x5A, 0x00, 0x0C, + /* #8, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #9, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #10, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #11, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #12, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #13.1-2, command header bytes for merged 'Write - value' command */ + 0xCC, 0x00, 0x14, 0x04, + /* #13.1, command: write_value, address: SEMC_INTR, value: 0x03, size: 4 */ + 0x40, 0x0D, 0x40, 0x3C, 0x00, 0x00, 0x00, 0x03, + /* #13.2, command: write_value, address: SEMC_IPCMD, value: 0xA55A000C, size: 4, comment: 'IP Command: Precharge All' */ + 0x40, 0x0D, 0x40, 0x9C, 0xA5, 0x5A, 0x00, 0x0C, + /* #14, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #15, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #16, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #17, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #18, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #19.1-3, command header bytes for merged 'Write - value' command */ + 0xCC, 0x00, 0x1C, 0x04, + /* #19.1, command: write_value, address: SEMC_INTR, value: 0x03, size: 4 */ + 0x40, 0x0D, 0x40, 0x3C, 0x00, 0x00, 0x00, 0x03, + /* #19.2, command: write_value, address: SEMC_IPTXDAT, value: 0x33, size: 4, comment: 'Mode: BurstLen8; CAS Latency 3' */ + 0x40, 0x0D, 0x40, 0xA0, 0x00, 0x00, 0x00, 0x33, + /* #19.3, command: write_value, address: SEMC_IPCMD, value: 0xA55A000A, size: 4, comment: 'IP Command: Mode Set' */ + 0x40, 0x0D, 0x40, 0x9C, 0xA5, 0x5A, 0x00, 0x0A, + /* #20, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #21, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #22, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #23, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #24, command: nop */ + 0xC0, 0x00, 0x04, 0x00, + /* #25.1-2, command header bytes for merged 'Write - value' command */ + 0xCC, 0x00, 0x14, 0x04, + /* #25.1, command: write_value, address: SEMC_INTR, value: 0x03, size: 4 */ + 0x40, 0x0D, 0x40, 0x3C, 0x00, 0x00, 0x00, 0x03, + /* #25.2, command: write_value, address: SEMC_SDRAMCR3, value: 0x8070A01, size: 4, comment: 'Enable autorefresh. Otherwise same as above.' */ + 0x40, 0x0D, 0x40, 0x4C, 0x08, 0x07, 0x0A, 0x01 + }; +/* BE CAREFUL MODIFYING THIS SETTINGS - IT IS YAML SETTINGS FOR TOOLS */ + +#else +const uint8_t dcd_data[] = {0x00}; +#endif /* XIP_BOOT_HEADER_DCD_ENABLE */ +#endif /* XIP_BOOT_HEADER_ENABLE */ |