librtems++: Remove from RTEMS.

This is old and there are better design patterns for threading and C++.
We recommend you use the new C++ standards based support.

Closes #2777.

1 files changed, 0 insertions, 149 deletions

diff --git a/testsuites/libtests/rtems++/rtems++.scn b/testsuites/libtests/rtems++/rtems++.scn
deleted file mode 100644
index 0ac7c9c172..0000000000
--- a/testsuites/libtests/rtems++/rtems++.scn
+++ /dev/null
@@ -1,149 +0,0 @@
-
-
-*** RTEMS++ TEST ***
-INIT - Task.create() - RTEMS[19] invalid thread priority
-INIT - Task.create() - RTEMS[00] successful completion
-INIT - Task.create() - RTEMS[16] illegal on calling thread
-INIT - Task.restart() - RTEMS[14] thread is in wrong state
-INIT - Task.start(0xDEADDEAD) - RTEMS[00] successful completion
-INIT - Destroy it's self
-<pause - screen 1>
- START Task Class test
-TA1  - test argument - argument matched
-TA1  - copy constructor - local and this id's match
-TA1  - copy constructor - local and this name's match
-TA1  - copy operator - local and this id's match
-TA1  - copy operator - local and this name's match
-TA1  - not owner destroy's task - RTEMS[23] not owner of resource
-TA1  - connect to a local valid task name - RTEMS[00] successful completion
-TA1  - connect to an invalid task name - RTEMS[03] invalid object name
-SELF - connect to a task on an invalid node - RTEMS[03] invalid object name
-TA1  - restart from a non-owner - RTEMS[23] not owner of resource
-<pause - screen 2>
-TA1  - wake after 0 secs - RTEMS[00] successful completion
-TA1  - wake after 500 msecs - RTEMS[00] successful completion
-TA1  - wake after 5 secs - RTEMS[00] successful completion
-TA1  - wake when - to do
-TA1  - connected object wake after 0 secs - RTEMS[00] successful completion
-TA1  - connected object wake after 500 msecs - RTEMS[00] successful completion
-TA1  - connected object wake after 5 secs - RTEMS[00] successful completion
-TA1  - connected object wake when - to do
-SELF - self object wake after 0 secs - RTEMS[00] successful completion
-SELF - self object wake after 500 msecs - RTEMS[00] successful completion
-SELF - self object wake after 5 secs - RTEMS[00] successful completion
-SELF - self object wake when - to do
-TA1  - get priority - RTEMS[00] successful completion, priority is 10
-TA1  - set priority to 512 - RTEMS[19] invalid thread priority
-TA1  - set priority to 25 - RTEMS[00] successful completion
-TA1  - set priority to original - RTEMS[00] successful completion, priority was 25
-TA1  - connected object get priority - RTEMS[00] successful completion, priority is 10
-TA1  - connected object set priority to 512 - RTEMS[19] invalid thread priority
-TA1  - connected object set priority to 25 - RTEMS[00] successful completion
-TA1  - connected object set priority to original - RTEMS[00] successful completion, priority was 25
-SELF - self object get priority - RTEMS[00] successful completion, priority is 10
-SELF - self object set priority to 512 - RTEMS[19] invalid thread priority
-SELF - self object set priority to 25 - RTEMS[00] successful completion
-SELF - self object set priority to original - RTEMS[00] successful completion, priority was 25
- END Task Class test
-<pause - screen 3>
- START TaskMode Class test
-SELF - get mode - RTEMS[00] successful completion,
-         mode is 0x00000500, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_ASR INTMASK=0
-SELF - get preemption state - RTEMS[00] successful completion,
-         mode is 0x00000100, RTEMS_NO_PREEMPT
-SELF - set preemption state to RTEMS_PREEMPT - RTEMS[00] successful completion,
-         mode is 0x00000400, RTEMS_PREEMPT RTEMS_TIMESLICE RTEMS_ASR INTMASK=0
-SELF - set preemption state to RTEMS_NO_PREEMPT - RTEMS[00] successful completion,
-         mode is 0x00000500, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_ASR INTMASK=0
-SELF - get timeslice state - RTEMS[00] successful completion,
-         mode is 0x00000000, RTEMS_TIMESLICE
-SELF - set timeslice state to RTEMS_TIMESLICE - RTEMS[00] successful completion,
-         mode is 0x00000700, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_ASR INTMASK=0
-SELF - set timeslice state to RTEMS_NO_TIMESLICE - RTEMS[00] successful completion,
-         mode is 0x00000500, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_ASR INTMASK=0
-SELF - get asr state - RTEMS[00] successful completion,
-         mode is 0x00000400, RTEMS_ASR
-SELF - set asr state to RTEMS_ASR - RTEMS[00] successful completion,
-         mode is 0x00000100, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
-SELF - set asr state to RTEMS_NO_ASR - RTEMS[00] successful completion,
-         mode is 0x00000500, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_ASR INTMASK=0
-SELF - get current interrupt level - RTEMS[00] successful completion, level is 0
-SELF - set interrupt level to 102 - RTEMS[00] successful completion
-SELF - set interrupt level to original level - RTEMS[00] successful completion, level was 6
-SELF - set mode to original mode - RTEMS[00] successful completion,
-         mode is 0x00000500, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_ASR INTMASK=0
- END TaskMode Class test
-<pause - screen 4>
- START Event Class test
-TA1  - create task 2 - RTEMS[00] successful completion
-TA1  - start task 2 - RTEMS[00] successful completion
-TA1  - construct event connecting to task 2 - RTEMS[00] successful completion
-TA2  - event no wait - RTEMS[13] request not satisfied
-TA2  - event 5 secs timeout - RTEMS[06] timed out waiting
-TA2  - event wait forever for signal 0 from TA1 ....
-TA1  - send event signal 0 using the task id - RTEMS[00] successful completion
-TA2  - RTEMS[00] successful completion, signals out are 0x00000001
-TA2  - event wait forever for signal 0 from TA1 ....
-TA1  - send event signal 0 using the task object reference - RTEMS[00] successful completion
-TA2  - RTEMS[00] successful completion, signals out are 0x00000001
-TA2  - event wait forever for signal 31 from TA1 ....
-TA1  - send event signal 31 using connected id - RTEMS[00] successful completion
-TA2  - RTEMS[00] successful completion, signals out are 0x80000000
-TA2  - event wait forever for signal 0 and 31 from TA1 ....
-TA1  - send event signal 0 and 31 - RTEMS[00] successful completion
-TA1  - waiting 5 secs for TA2 to finish
-TA2  - RTEMS[00] successful completion, signals out are 0x80000001
-TA2  - send event signal 1 - RTEMS[00] successful completion
-TA2  - event wait forever for signal 1 from TA2 - RTEMS[00] successful completion, signals out are 0x00000002
-TA2  - destroy itself
- END Event Class test
-<pause - screen 5>
- START Interrupt Class test
- do not know a portable BSP type interrupt test
- END Interrupt Class test
-<pause - screen 6>
- START MessageQueue Class test
-TA1  - construct message queue 1 with no memory error - RTEMS[13] request not satisfied
-TA1  - construct/create message queue 2 - RTEMS[00] successful completion
-TA1  - send u1 to mq_2 - RTEMS[00] successful completion
-TA1  - urgent send u2 to mq_2 - RTEMS[00] successful completion
-TA1  - create task 3_1 - RTEMS[00] successful completion
-TA1  - start task 3_1 - RTEMS[00] successful completion
-TA1  - create task 3_2 - RTEMS[00] successful completion
-TA1  - start task 3_2 - RTEMS[00] successful completion
-TA31 - construction connect mq_2 - RTEMS[00] successful completion
-TA31 - loopback from mq_2 to mq_2 ...
-TA31 - mq_2 receive - RTEMS[00] successful completion, size=12, message string size=11
-TA31 - loopback to mq_2 - RTEMS[00] successful completion
-TA32 - construction connect mq_2 - RTEMS[00] successful completion
-TA32 - loopback from mq_2 to mq_2 ...
-TA32 - mq_2 receive - RTEMS[00] successful completion, size=12, message string size=11
-TA32 - loopback to mq_2 - RTEMS[00] successful completion
-TA1  - receive u2 on mq_2 ...
-TA1  - RTEMS[00] successful completion
-TA1  - message u2 received correctly
-TA1  - receive u1 on mq_2 ...
-TA1  - RTEMS[00] successful completion
-TA1  - message u1 received correctly
-TA31 - loopback from mq_2 to mq_2 ...
-TA32 - loopback from mq_2 to mq_2 ...
-TA1  - broadcast send b1 ...
-TA1  - mq_2 broadcast send - RTEMS[00] successful completion, count=2
-TA31 - mq_2 receive - RTEMS[00] successful completion, size=18, message string size=17
-TA31 - loopback to mq_2 - RTEMS[00] successful completion
-TA31 - destroy itself
-TA32 - mq_2 receive - RTEMS[00] successful completion, size=18, message string size=17
-TA32 - loopback to mq_2 - RTEMS[00] successful completion
-TA32 - destroy itself
-TA1  - receive message b1 on mq_2 from TA31...
-TA1  - RTEMS[00] successful completion
-TA1  - message b1 received correctly
-TA1  - receive message b1 on mq_2 from TA31...
-TA1  - RTEMS[00] successful completion
-TA1  - message b1 received correctly
-TA1  - send f1 to mq_2 - RTEMS[00] successful completion
-TA1  - send f1 to mq_2 - RTEMS[00] successful completion
-TA1  - send f1 to mq_2 - RTEMS[00] successful completion
-TA1  - flush mq_2 - RTEMS[00] successful completion, flushed=3
- END MessageQueue Class test
-*** END OF RTEMS++ TEST ***