2008-08-21 Joel Sherrill <joel.sherrill@OARcorp.com>

	* bsp_howto/ata.t, bsp_howto/clock.t, bsp_howto/ide-ctrl.t,
	bsp_howto/nvmem.t, bsp_howto/shmsupp.t, user/datatypes.t, user/mp.t,
	user/userext.t: Eliminate all references to rtems_signedXX and
	rtems_unsignedXX.

9 files changed, 54 insertions, 47 deletions

diff --git a/doc/ChangeLog b/doc/ChangeLog
index 0e3ddd24fa..f340ba8418 100644
--- a/doc/ChangeLog
+++ b/doc/ChangeLog
@@ -1,3 +1,10 @@
+2008-08-21	Joel Sherrill <joel.sherrill@OARcorp.com>
+
+	* bsp_howto/ata.t, bsp_howto/clock.t, bsp_howto/ide-ctrl.t,
+	bsp_howto/nvmem.t, bsp_howto/shmsupp.t, user/datatypes.t, user/mp.t,
+	user/userext.t: Eliminate all references to rtems_signedXX and
+	rtems_unsignedXX.
+
 2008-08-08     Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* user/msg.t, user/sem.t, user/task.t: Update to new parameter types.
diff --git a/doc/bsp_howto/ata.t b/doc/bsp_howto/ata.t
index 851a41ee3b..c1c17fda3f 100644
--- a/doc/bsp_howto/ata.t
+++ b/doc/bsp_howto/ata.t
@@ -101,9 +101,9 @@ typedef struct ata_req_s @{
     Chain_Node        link;   /* link in requests chain */
     char              type;   /* request type */
     ata_registers_t   regs;   /* ATA command */
-    rtems_unsigned32  cnt;    /* Number of sectors to be exchanged */
-    rtems_unsigned32  cbuf;   /* number of current buffer from breq in use */
-    rtems_unsigned32  pos;    /* current position in 'cbuf' */
+    uint32_t          cnt;    /* Number of sectors to be exchanged */
+    uint32_t          cbuf;   /* number of current buffer from breq in use */
+    uint32_t          pos;    /* current position in 'cbuf' */
     blkdev_request   *breq;   /* blkdev_request which corresponds to the
                                * ata request
                                */
diff --git a/doc/bsp_howto/clock.t b/doc/bsp_howto/clock.t
index 24a6812d4c..69b16e154b 100644
--- a/doc/bsp_howto/clock.t
+++ b/doc/bsp_howto/clock.t
@@ -47,7 +47,7 @@ routines that have occured.  This information is valuable when debugging
 a system.  This variable is declared as follows:
 
 @example
-volatile rtems_unsigned32 Clock_driver_ticks;
+volatile uint32_t Clock_driver_ticks;
 @end example
 
 @section Initialization
diff --git a/doc/bsp_howto/ide-ctrl.t b/doc/bsp_howto/ide-ctrl.t
index f5ece8507d..4a7697004e 100644
--- a/doc/bsp_howto/ide-ctrl.t
+++ b/doc/bsp_howto/ide-ctrl.t
@@ -113,11 +113,13 @@ overhead. This routine is not allowed to be called from an application.
 
 @example
 @group
-void ide_controller_read_data_block(rtems_device_minor_number  minor,
-                                    unsigned16                 block_size,
-                                    blkdev_sg_buffer          *bufs,
-                                    rtems_unsigned32          *cbuf,
-                                    rtems_unsigned32          *pos)
+void ide_controller_read_data_block(
+  rtems_device_minor_number  minor,
+  unsigned16                 block_size,
+  blkdev_sg_buffer          *bufs,
+  uint32_t                  *cbuf,
+  uint32_t                  *pos
+)
 @{
   get IDE Controller chip configuration information from
   IDE_Controller_Table by minor number
@@ -138,11 +140,13 @@ overhead. This routine is not allowed to be called from an application.
 
 @example
 @group
-void ide_controller_write_data_block(rtems_device_minor_number  minor,
-                                     unsigned16                 block_size,
-                                     blkdev_sg_buffer          *bufs,
-                                     rtems_unsigned32          *cbuf,
-                                     rtems_unsigned32          *pos)
+void ide_controller_write_data_block(
+  rtems_device_minor_number  minor,
+  unsigned16                 block_size,
+  blkdev_sg_buffer          *bufs,
+  uint32_t                  *cbuf,
+  uint32_t                  *pos
+)
 @{
   get IDE Controller chip configuration information from
   IDE_Controller_Table by minor number
diff --git a/doc/bsp_howto/nvmem.t b/doc/bsp_howto/nvmem.t
index 2c1063b8c3..aca391409b 100644
--- a/doc/bsp_howto/nvmem.t
+++ b/doc/bsp_howto/nvmem.t
@@ -184,10 +184,10 @@ structure type:
 @example
 @group
 typedef struct @{
-  rtems_unsigned32   offset;
-  void              *buffer;
-  rtems_unsigned32   length;
-  rtems_unsigned32   status;
+  uint32_t  offset;
+  void     *buffer;
+  uint32_t  length;
+  uint32_t  status;
 @}   Non_volatile_memory_Driver_arguments;
 @end group
 @end example
@@ -211,10 +211,10 @@ the following structure type:
 @example
 @group
 typedef struct @{
-  rtems_unsigned32   offset;
-  void              *buffer;
-  rtems_unsigned32   length;
-  rtems_unsigned32   status;
+  uint32_t   offset;
+  void      *buffer;
+  uint32_t   length;
+  uint32_t   status;
 @}   Non_volatile_memory_Driver_arguments;
 @end group
 @end example
diff --git a/doc/bsp_howto/shmsupp.t b/doc/bsp_howto/shmsupp.t
index 3c087ca6cd..885db4d5e6 100644
--- a/doc/bsp_howto/shmsupp.t
+++ b/doc/bsp_howto/shmsupp.t
@@ -27,7 +27,7 @@ structure:
 
 @example
 @group
-typedef volatile rtems_unsigned32 vol_u32;
+typedef volatile uint32_t vol_u32;
 
 typedef struct @{
   vol_u32 *address;        /* write here for interrupt    */
@@ -41,7 +41,7 @@ struct shm_config_info @{
   vol_u32            format;     /* SHM is big or little endian */
   vol_u32          (*convert)(); /* neutral conversion routine  */
   vol_u32            poll_intr;  /* POLLED or INTR driven mode  */
-  void             (*cause_intr)( rtems_unsigned32 );
+  void             (*cause_intr)( uint32_t );
   Shm_Interrupt_information   Intr; /* cause intr information   */
 @};
 
@@ -123,7 +123,7 @@ Shared Memory Configuration Table passed to it.
 @example
 @group
 void Shm_Get_configuration(
-  rtems_unsigned32   localnode,
+  uint32_t           localnode,
   shm_config_table **shmcfg
 )
 @{
diff --git a/doc/user/datatypes.t b/doc/user/datatypes.t
index 6f3e6e7ac7..e65695b483 100644
--- a/doc/user/datatypes.t
+++ b/doc/user/datatypes.t
@@ -194,29 +194,25 @@ that is expected to be used by the MPCI layer.
 type used to manage and manipulate RTEMS signal sets
 with the Signal Manager.
 
-@findex rtems_signed8
-@item @code{@value{DIRPREFIX}signed8} is the data
-type that corresponds to signed eight bit integers.
-This data type is defined by RTEMS in a manner that
+@findex int8_t
+@item @code{int8_t} is the C99 data type that corresponds to signed eight
+bit integers.  This data type is defined by RTEMS in a manner that
 ensures it is portable across different target processors.
 
-@findex rtems_signed16
-@item @code{@value{DIRPREFIX}signed16} is the data
-type that corresponds to signed sixteen bit integers.
-This data type is defined by RTEMS in a manner that
-ensures it is portable across different target processors.
+@findex int16_t
+@item @code{int16_t} is the C99 data type that corresponds to signed
+sixteen bit integers.  This data type is defined by RTEMS in a manner
+that ensures it is portable across different target processors.
 
-@findex rtems_signed32
-@item @code{@value{DIRPREFIX}signed32} is the data
-type that corresponds to signed thirty-two bit integers.
-This data type is defined by RTEMS in a manner that
-ensures it is portable across different target processors.
+@findex int32_t
+@item @code{int32_t} is the C99 data type that corresponds to signed
+thirty-two bit integers.  This data type is defined by RTEMS in a manner
+that ensures it is portable across different target processors.
 
-@findex rtems_signed64
-@item @code{@value{DIRPREFIX}signed64} is the data
-type that corresponds to signed sixty-four bit integers.
-This data type is defined by RTEMS in a manner that
-ensures it is portable across different target processors.
+@findex int64_t
+@item @code{int64_t} is the C99 data type that corresponds to signed
+sixty-four bit integers.  This data type is defined by RTEMS in a manner
+that ensures it is portable across different target processors.
 
 @findex rtems_single
 @item @code{@value{DIRPREFIX}single} is the RTEMS data
diff --git a/doc/user/mp.t b/doc/user/mp.t
index b1f16cbabf..693509af6d 100644
--- a/doc/user/mp.t
+++ b/doc/user/mp.t
@@ -410,7 +410,7 @@ following prototype:
 @example
 @group
 rtems_mpci_entry user_mpci_send_packet(
-  rtems_unsigned32       node,
+  uint32_t               node,
   rtems_packet_prefix  **packet
 );
 @end group
@@ -433,7 +433,7 @@ of the packet to avoid sending unnecessary data.  This is especially
 useful if the media connecting the nodes is relatively slow.
 
 The to_convert field of the MP_packet_prefix portion of the packet indicates
-how much of the packet (in @code{rtems_unsigned32}'s) may require
+how much of the packet (in @code{uint32_t}'s) may require
 conversion in a heterogeneous system.
 
 @subsection Supporting Heterogeneous Environments
diff --git a/doc/user/userext.t b/doc/user/userext.t
index 2bb4c81006..2a6fad440a 100644
--- a/doc/user/userext.t
+++ b/doc/user/userext.t
@@ -466,7 +466,7 @@ This extension should have a prototype similar to the following:
 rtems_extension user_fatal_error(
   Internal_errors_Source  the_source,
   rtems_boolean           is_internal,
-  rtems_unsigned32        the_error
+  uint32_t                the_error
 );
 @end example
 @end ifset