Import from zlib-1.2.4

1 files changed, 974 insertions, 329 deletions

diff --git a/cpukit/zlib/examples/gzlog.c b/cpukit/zlib/examples/gzlog.c
index f71f817c8b..d70aacabae 100644
--- a/cpukit/zlib/examples/gzlog.c
+++ b/cpukit/zlib/examples/gzlog.c
@@ -1,413 +1,1058 @@
 /*
  * gzlog.c
- * Copyright (C) 2004 Mark Adler
+ * Copyright (C) 2004, 2008 Mark Adler, all rights reserved
  * For conditions of distribution and use, see copyright notice in gzlog.h
- * version 1.0, 26 Nov 2004
- *
+ * version 2.0, 25 Apr 2008
  */
 
-#include <string.h>             /* memcmp() */
-#include <stdlib.h>             /* malloc(), free(), NULL */
-#include <sys/types.h>          /* size_t, off_t */
-#include <unistd.h>             /* read(), close(), sleep(), ftruncate(), */
-                                /* lseek() */
-#include <fcntl.h>              /* open() */
-#include <sys/file.h>           /* flock() */
-#include "zlib.h"               /* deflateInit2(), deflate(), deflateEnd() */
+/*
+   gzlog provides a mechanism for frequently appending short strings to a gzip
+   file that is efficient both in execution time and compression ratio.  The
+   strategy is to write the short strings in an uncompressed form to the end of
+   the gzip file, only compressing when the amount of uncompressed data has
+   reached a given threshold.
+
+   gzlog also provides protection against interruptions in the process due to
+   system crashes.  The status of the operation is recorded in an extra field
+   in the gzip file, and is only updated once the gzip file is brought to a
+   valid state.  The last data to be appended or compressed is saved in an
+   auxiliary file, so that if the operation is interrupted, it can be completed
+   the next time an append operation is attempted.
+
+   gzlog maintains another auxiliary file with the last 32K of data from the
+   compressed portion, which is preloaded for the compression of the subsequent
+   data.  This minimizes the impact to the compression ratio of appending.
+ */
+
+/*
+   Operations Concept:
+
+   Files (log name "foo"):
+   foo.gz -- gzip file with the complete log
+   foo.add -- last message to append or last data to compress
+   foo.dict -- dictionary of the last 32K of data for next compression
+   foo.temp -- temporary dictionary file for compression after this one
+   foo.lock -- lock file for reading and writing the other files
+   foo.repairs -- log file for log file recovery operations (not compressed)
+
+   gzip file structure:
+   - fixed-length (no file name) header with extra field (see below)
+   - compressed data ending initially with empty stored block
+   - uncompressed data filling out originally empty stored block and
+     subsequent stored blocks as needed (16K max each)
+   - gzip trailer
+   - no junk at end (no other gzip streams)
+
+   When appending data, the information in the first three items above plus the
+   foo.add file are sufficient to recover an interrupted append operation.  The
+   extra field has the necessary information to restore the start of the last
+   stored block and determine where to append the data in the foo.add file, as
+   well as the crc and length of the gzip data before the append operation.
+
+   The foo.add file is created before the gzip file is marked for append, and
+   deleted after the gzip file is marked as complete.  So if the append
+   operation is interrupted, the data to add will still be there.  If due to
+   some external force, the foo.add file gets deleted between when the append
+   operation was interrupted and when recovery is attempted, the gzip file will
+   still be restored, but without the appended data.
+
+   When compressing data, the information in the first two items above plus the
+   foo.add file are sufficient to recover an interrupted compress operation.
+   The extra field has the necessary information to find the end of the
+   compressed data, and contains both the crc and length of just the compressed
+   data and of the complete set of data including the contents of the foo.add
+   file.
+
+   Again, the foo.add file is maintained during the compress operation in case
+   of an interruption.  If in the unlikely event the foo.add file with the data
+   to be compressed is missing due to some external force, a gzip file with
+   just the previous compressed data will be reconstructed.  In this case, all
+   of the data that was to be compressed is lost (approximately one megabyte).
+   This will not occur if all that happened was an interruption of the compress
+   operation.
+
+   The third state that is marked is the replacement of the old dictionary with
+   the new dictionary after a compress operation.  Once compression is
+   complete, the gzip file is marked as being in the replace state.  This
+   completes the gzip file, so an interrupt after being so marked does not
+   result in recompression.  Then the dictionary file is replaced, and the gzip
+   file is marked as completed.  This state prevents the possibility of
+   restarting compression with the wrong dictionary file.
+
+   All three operations are wrapped by a lock/unlock procedure.  In order to
+   gain exclusive access to the log files, first a foo.lock file must be
+   exclusively created.  When all operations are complete, the lock is
+   released by deleting the foo.lock file.  If when attempting to create the
+   lock file, it already exists and the modify time of the lock file is more
+   than five minutes old (set by the PATIENCE define below), then the old
+   lock file is considered stale and deleted, and the exclusive creation of
+   the lock file is retried.  To assure that there are no false assessments
+   of the staleness of the lock file, the operations periodically touch the
+   lock file to update the modified date.
+
+   Following is the definition of the extra field with all of the information
+   required to enable the above append and compress operations and their
+   recovery if interrupted.  Multi-byte values are stored little endian
+   (consistent with the gzip format).  File pointers are eight bytes long.
+   The crc's and lengths for the gzip trailer are four bytes long.  (Note that
+   the length at the end of a gzip file is used for error checking only, and
+   for large files is actually the length modulo 2^32.)  The stored block
+   length is two bytes long.  The gzip extra field two-byte identification is
+   "ap" for append.  It is assumed that writing the extra field to the file is
+   an "atomic" operation.  That is, either all of the extra field is written
+   to the file, or none of it is, if the operation is interrupted right at the
+   point of updating the extra field.  This is a reasonable assumption, since
+   the extra field is within the first 52 bytes of the file, which is smaller
+   than any expected block size for a mass storage device (usually 512 bytes or
+   larger).
+
+   Extra field (35 bytes):
+   - Pointer to first stored block length -- this points to the two-byte length
+     of the first stored block, which is followed by the two-byte, one's
+     complement of that length.  The stored block length is preceded by the
+     three-bit header of the stored block, which is the actual start of the
+     stored block in the deflate format.  See the bit offset field below.
+   - Pointer to the last stored block length.  This is the same as above, but
+     for the last stored block of the uncompressed data in the gzip file.
+     Initially this is the same as the first stored block length pointer.
+     When the stored block gets to 16K (see the MAX_STORE define), then a new
+     stored block as added, at which point the last stored block length pointer
+     is different from the first stored block length pointer.  When they are
+     different, the first bit of the last stored block header is eight bits, or
+     one byte back from the block length.
+   - Compressed data crc and length.  This is the crc and length of the data
+     that is in the compressed portion of the deflate stream.  These are used
+     only in the event that the foo.add file containing the data to compress is
+     lost after a compress operation is interrupted.
+   - Total data crc and length.  This is the crc and length of all of the data
+     stored in the gzip file, compressed and uncompressed.  It is used to
+     reconstruct the gzip trailer when compressing, as well as when recovering
+     interrupted operations.
+   - Final stored block length.  This is used to quickly find where to append,
+     and allows the restoration of the original final stored block state when
+     an append operation is interrupted.
+   - First stored block start as the number of bits back from the final stored
+     block first length byte.  This value is in the range of 3..10, and is
+     stored as the low three bits of the final byte of the extra field after
+     subtracting three (0..7).  This allows the last-block bit of the stored
+     block header to be updated when a new stored block is added, for the case
+     when the first stored block and the last stored block are the same.  (When
+     they are different, the numbers of bits back is known to be eight.)  This
+     also allows for new compressed data to be appended to the old compressed
+     data in the compress operation, overwriting the previous first stored
+     block, or for the compressed data to be terminated and a valid gzip file
+     reconstructed on the off chance that a compression operation was
+     interrupted and the data to compress in the foo.add file was deleted.
+   - The operation in process.  This is the next two bits in the last byte (the
+     bits under the mask 0x18).  The are interpreted as 0: nothing in process,
+     1: append in process, 2: compress in process, 3: replace in process.
+   - The top three bits of the last byte in the extra field are reserved and
+     are currently set to zero.
+
+   Main procedure:
+   - Exclusively create the foo.lock file using the O_CREAT and O_EXCL modes of
+     the system open() call.  If the modify time of an existing lock file is
+     more than PATIENCE seconds old, then the lock file is deleted and the
+     exclusive create is retried.
+   - Load the extra field from the foo.gz file, and see if an operation was in
+     progress but not completed.  If so, apply the recovery procedure below.
+   - Perform the append procedure with the provided data.
+   - If the uncompressed data in the foo.gz file is 1MB or more, apply the
+     compress procedure.
+   - Delete the foo.lock file.
+
+   Append procedure:
+   - Put what to append in the foo.add file so that the operation can be
+     restarted if this procedure is interrupted.
+   - Mark the foo.gz extra field with the append operation in progress.
+   + Restore the original last-block bit and stored block length of the last
+     stored block from the information in the extra field, in case a previous
+     append operation was interrupted.
+   - Append the provided data to the last stored block, creating new stored
+     blocks as needed and updating the stored blocks last-block bits and
+     lengths.
+   - Update the crc and length with the new data, and write the gzip trailer.
+   - Write over the extra field (with a single write operation) with the new
+     pointers, lengths, and crc's, and mark the gzip file as not in process.
+     Though there is still a foo.add file, it will be ignored since nothing
+     is in process.  If a foo.add file is leftover from a previously
+     completed operation, it is truncated when writing new data to it.
+   - Delete the foo.add file.
+
+   Compress and replace procedures:
+   - Read all of the uncompressed data in the stored blocks in foo.gz and write
+     it to foo.add.  Also write foo.temp with the last 32K of that data to
+     provide a dictionary for the next invocation of this procedure.
+   - Rewrite the extra field marking foo.gz with a compression in process.
+   * If there is no data provided to compress (due to a missing foo.add file
+     when recovering), reconstruct and truncate the foo.gz file to contain
+     only the previous compressed data and proceed to the step after the next
+     one.  Otherwise ...
+   - Compress the data with the dictionary in foo.dict, and write to the
+     foo.gz file starting at the bit immediately following the last previously
+     compressed block.  If there is no foo.dict, proceed anyway with the
+     compression at slightly reduced efficiency.  (For the foo.dict file to be
+     missing requires some external failure beyond simply the interruption of
+     a compress operation.)  During this process, the foo.lock file is
+     periodically touched to assure that that file is not considered stale by
+     another process before we're done.  The deflation is terminated with a
+     non-last empty static block (10 bits long), that is then located and
+     written over by a last-bit-set empty stored block.
+   - Append the crc and length of the data in the gzip file (previously
+     calculated during the append operations).
+   - Write over the extra field with the updated stored block offsets, bits
+     back, crc's, and lengths, and mark foo.gz as in process for a replacement
+     of the dictionary.
+   @ Delete the foo.add file.
+   - Replace foo.dict with foo.temp.
+   - Write over the extra field, marking foo.gz as complete.
+
+   Recovery procedure:
+   - If not a replace recovery, read in the foo.add file, and provide that data
+     to the appropriate recovery below.  If there is no foo.add file, provide
+     a zero data length to the recovery.  In that case, the append recovery
+     restores the foo.gz to the previous compressed + uncompressed data state.
+     For the the compress recovery, a missing foo.add file results in foo.gz
+     being restored to the previous compressed-only data state.
+   - Append recovery:
+     - Pick up append at + step above
+   - Compress recovery:
+     - Pick up compress at * step above
+   - Replace recovery:
+     - Pick up compress at @ step above
+   - Log the repair with a date stamp in foo.repairs
+ */
+
+#include <sys/types.h>
+#include <stdio.h>      /* rename, fopen, fprintf, fclose */
+#include <stdlib.h>     /* malloc, free */
+#include <string.h>     /* strlen, strrchr, strcpy, strncpy, strcmp */
+#include <fcntl.h>      /* open */
+#include <unistd.h>     /* lseek, read, write, close, unlink, sleep, */
+                        /* ftruncate, fsync */
+#include <errno.h>      /* errno */
+#include <time.h>       /* time, ctime */
+#include <sys/stat.h>   /* stat */
+#include <sys/time.h>   /* utimes */
+#include "zlib.h"       /* crc32 */
+
+#include "gzlog.h"      /* header for external access */
 
-#include "gzlog.h"              /* interface */
 #define local static
+typedef unsigned int uint;
+typedef unsigned long ulong;
+
+/* Macro for debugging to deterministically force recovery operations */
+#ifdef DEBUG
+    #include <setjmp.h>         /* longjmp */
+    jmp_buf gzlog_jump;         /* where to go back to */
+    int gzlog_bail = 0;         /* which point to bail at (1..8) */
+    int gzlog_count = -1;       /* number of times through to wait */
+#   define BAIL(n) do { if (n == gzlog_bail && gzlog_count-- == 0) \
+                            longjmp(gzlog_jump, gzlog_bail); } while (0)
+#else
+#   define BAIL(n)
+#endif
+
+/* how old the lock file can be in seconds before considering it stale */
+#define PATIENCE 300
+
+/* maximum stored block size in Kbytes -- must be in 1..63 */
+#define MAX_STORE 16
 
-/* log object structure */
-typedef struct {
-    int id;                 /* object identifier */
-    int fd;                 /* log file descriptor */
-    off_t extra;            /* offset of extra "ap" subfield */
-    off_t mark_off;         /* offset of marked data */
-    off_t last_off;         /* offset of last block */
-    unsigned long crc;      /* uncompressed crc */
-    unsigned long len;      /* uncompressed length (modulo 2^32) */
-    unsigned stored;        /* length of current stored block */
-} gz_log;
-
-#define GZLOGID 19334       /* gz_log object identifier */
-
-#define LOCK_RETRY 1            /* retry lock once a second */
-#define LOCK_PATIENCE 1200      /* try about twenty minutes before forcing */
-
-/* acquire a lock on a file */
-local int lock(int fd)
+/* number of stored Kbytes to trigger compression (must be >= 32 to allow
+   dictionary construction, and <= 204 * MAX_STORE, in order for >> 10 to
+   discard the stored block headers contribution of five bytes each) */
+#define TRIGGER 1024
+
+/* size of a deflate dictionary (this cannot be changed) */
+#define DICT 32768U
+
+/* values for the operation (2 bits) */
+#define NO_OP 0
+#define APPEND_OP 1
+#define COMPRESS_OP 2
+#define REPLACE_OP 3
+
+/* macros to extract little-endian integers from an unsigned byte buffer */
+#define PULL2(p) ((p)[0]+((uint)((p)[1])<<8))
+#define PULL4(p) (PULL2(p)+((ulong)PULL2(p+2)<<16))
+#define PULL8(p) (PULL4(p)+((off_t)PULL4(p+4)<<32))
+
+/* macros to store integers into a byte buffer in little-endian order */
+#define PUT2(p,a) do {(p)[0]=a;(p)[1]=(a)>>8;} while(0)
+#define PUT4(p,a) do {PUT2(p,a);PUT2(p+2,a>>16);} while(0)
+#define PUT8(p,a) do {PUT4(p,a);PUT4(p+4,a>>32);} while(0)
+
+/* internal structure for log information */
+#define LOGID "\106\035\172"    /* should be three non-zero characters */
+struct log {
+    char id[4];     /* contains LOGID to detect inadvertent overwrites */
+    int fd;         /* file descriptor for .gz file, opened read/write */
+    char *path;     /* allocated path, e.g. "/var/log/foo" or "foo" */
+    char *end;      /* end of path, for appending suffices such as ".gz" */
+    off_t first;    /* offset of first stored block first length byte */
+    int back;       /* location of first block id in bits back from first */
+    uint stored;    /* bytes currently in last stored block */
+    off_t last;     /* offset of last stored block first length byte */
+    ulong ccrc;     /* crc of compressed data */
+    ulong clen;     /* length (modulo 2^32) of compressed data */
+    ulong tcrc;     /* crc of total data */
+    ulong tlen;     /* length (modulo 2^32) of total data */
+    time_t lock;    /* last modify time of our lock file */
+};
+
+/* gzip header for gzlog */
+local unsigned char log_gzhead[] = {
+    0x1f, 0x8b,                 /* magic gzip id */
+    8,                          /* compression method is deflate */
+    4,                          /* there is an extra field (no file name) */
+    0, 0, 0, 0,                 /* no modification time provided */
+    0, 0xff,                    /* no extra flags, no OS specified */
+    39, 0, 'a', 'p', 35, 0      /* extra field with "ap" subfield */
+                                /* 35 is EXTRA, 39 is EXTRA + 4 */
+};
+
+#define HEAD sizeof(log_gzhead)     /* should be 16 */
+
+/* initial gzip extra field content (52 == HEAD + EXTRA + 1) */
+local unsigned char log_gzext[] = {
+    52, 0, 0, 0, 0, 0, 0, 0,    /* offset of first stored block length */
+    52, 0, 0, 0, 0, 0, 0, 0,    /* offset of last stored block length */
+    0, 0, 0, 0, 0, 0, 0, 0,     /* compressed data crc and length */
+    0, 0, 0, 0, 0, 0, 0, 0,     /* total data crc and length */
+    0, 0,                       /* final stored block data length */
+    5                           /* op is NO_OP, last bit 8 bits back */
+};
+
+#define EXTRA sizeof(log_gzext)     /* should be 35 */
+
+/* initial gzip data and trailer */
+local unsigned char log_gzbody[] = {
+    1, 0, 0, 0xff, 0xff,        /* empty stored block (last) */
+    0, 0, 0, 0,                 /* crc */
+    0, 0, 0, 0                  /* uncompressed length */
+};
+
+#define BODY sizeof(log_gzbody)
+
+/* Exclusively create foo.lock in order to negotiate exclusive access to the
+   foo.* files.  If the modify time of an existing lock file is greater than
+   PATIENCE seconds in the past, then consider the lock file to have been
+   abandoned, delete it, and try the exclusive create again.  Save the lock
+   file modify time for verification of ownership.  Return 0 on success, or -1
+   on failure, usually due to an access restriction or invalid path.  Note that
+   if stat() or unlink() fails, it may be due to another process noticing the
+   abandoned lock file a smidge sooner and deleting it, so those are not
+   flagged as an error. */
+local int log_lock(struct log *log)
 {
-    int patience;
+    int fd;
+    struct stat st;
 
-    /* try to lock every LOCK_RETRY seconds for LOCK_PATIENCE seconds */
-    patience = LOCK_PATIENCE;
-    do {
-        if (flock(fd, LOCK_EX + LOCK_NB) == 0)
-            return 0;
-        (void)sleep(LOCK_RETRY);
-        patience -= LOCK_RETRY;
-    } while (patience > 0);
+    strcpy(log->end, ".lock");
+    while ((fd = open(log->path, O_CREAT | O_EXCL, 0644)) < 0) {
+        if (errno != EEXIST)
+            return -1;
+        if (stat(log->path, &st) == 0 && time(NULL) - st.st_mtime > PATIENCE) {
+            unlink(log->path);
+            continue;
+        }
+        sleep(2);       /* relinquish the CPU for two seconds while waiting */
+    }
+    close(fd);
+    if (stat(log->path, &st) == 0)
+        log->lock = st.st_mtime;
+    return 0;
+}
 
-    /* we've run out of patience -- give up */
-    return -1;
+/* Update the modify time of the lock file to now, in order to prevent another
+   task from thinking that the lock is stale.  Save the lock file modify time
+   for verification of ownership. */
+local void log_touch(struct log *log)
+{
+    struct stat st;
+
+    strcpy(log->end, ".lock");
+    utimes(log->path, NULL);
+    if (stat(log->path, &st) == 0)
+        log->lock = st.st_mtime;
 }
 
-/* release lock */
-local void unlock(int fd)
+/* Check the log file modify time against what is expected.  Return true if
+   this is not our lock.  If it is our lock, touch it to keep it. */
+local int log_check(struct log *log)
 {
-    (void)flock(fd, LOCK_UN);
+    struct stat st;
+
+    strcpy(log->end, ".lock");
+    if (stat(log->path, &st) || st.st_mtime != log->lock)
+        return 1;
+    log_touch(log);
+    return 0;
 }
 
-/* release a log object */
-local void log_clean(gz_log *log)
+/* Unlock a previously acquired lock, but only if it's ours. */
+local void log_unlock(struct log *log)
 {
-    unlock(log->fd);
-    (void)close(log->fd);
-    free(log);
+    if (log_check(log))
+        return;
+    strcpy(log->end, ".lock");
+    unlink(log->path);
+    log->lock = 0;
 }
 
-/* read an unsigned long from a byte buffer little-endian */
-local unsigned long make_ulg(unsigned char *buf)
+/* Check the gzip header and read in the extra field, filling in the values in
+   the log structure.  Return op on success or -1 if the gzip header was not as
+   expected.  op is the current operation in progress last written to the extra
+   field.  This assumes that the gzip file has already been opened, with the
+   file descriptor log->fd. */
+local int log_head(struct log *log)
 {
-    int n;
-    unsigned long val;
+    int op;
+    unsigned char buf[HEAD + EXTRA];
 
-    val = (unsigned long)(*buf++);
-    for (n = 8; n < 32; n += 8)
-        val += (unsigned long)(*buf++) << n;
-    return val;
+    if (lseek(log->fd, 0, SEEK_SET) < 0 ||
+        read(log->fd, buf, HEAD + EXTRA) != HEAD + EXTRA ||
+        memcmp(buf, log_gzhead, HEAD)) {
+        return -1;
+    }
+    log->first = PULL8(buf + HEAD);
+    log->last = PULL8(buf + HEAD + 8);
+    log->ccrc = PULL4(buf + HEAD + 16);
+    log->clen = PULL4(buf + HEAD + 20);
+    log->tcrc = PULL4(buf + HEAD + 24);
+    log->tlen = PULL4(buf + HEAD + 28);
+    log->stored = PULL2(buf + HEAD + 32);
+    log->back = 3 + (buf[HEAD + 34] & 7);
+    op = (buf[HEAD + 34] >> 3) & 3;
+    return op;
 }
 
-/* read an off_t from a byte buffer little-endian */
-local off_t make_off(unsigned char *buf)
+/* Write over the extra field contents, marking the operation as op.  Use fsync
+   to assure that the device is written to, and in the requested order.  This
+   operation, and only this operation, is assumed to be atomic in order to
+   assure that the log is recoverable in the event of an interruption at any
+   point in the process.  Return -1 if the write to foo.gz failed. */
+local int log_mark(struct log *log, int op)
 {
-    int n;
-    off_t val;
+    int ret;
+    unsigned char ext[EXTRA];
 
-    val = (off_t)(*buf++);
-    for (n = 8; n < 64; n += 8)
-        val += (off_t)(*buf++) << n;
-    return val;
+    PUT8(ext, log->first);
+    PUT8(ext + 8, log->last);
+    PUT4(ext + 16, log->ccrc);
+    PUT4(ext + 20, log->clen);
+    PUT4(ext + 24, log->tcrc);
+    PUT4(ext + 28, log->tlen);
+    PUT2(ext + 32, log->stored);
+    ext[34] = log->back - 3 + (op << 3);
+    fsync(log->fd);
+    ret = lseek(log->fd, HEAD, SEEK_SET) < 0 ||
+          write(log->fd, ext, EXTRA) != EXTRA ? -1 : 0;
+    fsync(log->fd);
+    return ret;
 }
 
-/* write an unsigned long little-endian to byte buffer */
-local void dice_ulg(unsigned long val, unsigned char *buf)
+/* Rewrite the last block header bits and subsequent zero bits to get to a byte
+   boundary, setting the last block bit if last is true, and then write the
+   remainder of the stored block header (length and one's complement).  Leave
+   the file pointer after the end of the last stored block data.  Return -1 if
+   there is a read or write failure on the foo.gz file */
+local int log_last(struct log *log, int last)
 {
-    int n;
+    int back, len, mask;
+    unsigned char buf[6];
+
+    /* determine the locations of the bytes and bits to modify */
+    back = log->last == log->first ? log->back : 8;
+    len = back > 8 ? 2 : 1;                 /* bytes back from log->last */
+    mask = 0x80 >> ((back - 1) & 7);        /* mask for block last-bit */
+
+    /* get the byte to modify (one or two back) into buf[0] -- don't need to
+       read the byte if the last-bit is eight bits back, since in that case
+       the entire byte will be modified */
+    buf[0] = 0;
+    if (back != 8 && (lseek(log->fd, log->last - len, SEEK_SET) < 0 ||
+                      read(log->fd, buf, 1) != 1))
+        return -1;
+
+    /* change the last-bit of the last stored block as requested -- note
+       that all bits above the last-bit are set to zero, per the type bits
+       of a stored block being 00 and per the convention that the bits to
+       bring the stream to a byte boundary are also zeros */
+    buf[1] = 0;
+    buf[2 - len] = (*buf & (mask - 1)) + (last ? mask : 0);
 
-    for (n = 0; n < 4; n++) {
-        *buf++ = val & 0xff;
-        val >>= 8;
+    /* write the modified stored block header and lengths, move the file
+       pointer to after the last stored block data */
+    PUT2(buf + 2, log->stored);
+    PUT2(buf + 4, log->stored ^ 0xffff);
+    return lseek(log->fd, log->last - len, SEEK_SET) < 0 ||
+           write(log->fd, buf + 2 - len, len + 4) != len + 4 ||
+           lseek(log->fd, log->stored, SEEK_CUR) < 0 ? -1 : 0;
+}
+
+/* Append len bytes from data to the locked and open log file.  len may be zero
+   if recovering and no .add file was found.  In that case, the previous state
+   of the foo.gz file is restored.  The data is appended uncompressed in
+   deflate stored blocks.  Return -1 if there was an error reading or writing
+   the foo.gz file. */
+local int log_append(struct log *log, unsigned char *data, size_t len)
+{
+    uint put;
+    off_t end;
+    unsigned char buf[8];
+
+    /* set the last block last-bit and length, in case recovering an
+       interrupted append, then position the file pointer to append to the
+       block */
+    if (log_last(log, 1))
+        return -1;
+
+    /* append, adding stored blocks and updating the offset of the last stored
+       block as needed, and update the total crc and length */
+    while (len) {
+        /* append as much as we can to the last block */
+        put = (MAX_STORE << 10) - log->stored;
+        if (put > len)
+            put = (uint)len;
+        if (put) {
+            if (write(log->fd, data, put) != put)
+                return -1;
+            BAIL(1);
+            log->tcrc = crc32(log->tcrc, data, put);
+            log->tlen += put;
+            log->stored += put;
+            data += put;
+            len -= put;
+        }
+
+        /* if we need to, add a new empty stored block */
+        if (len) {
+            /* mark current block as not last */
+            if (log_last(log, 0))
+                return -1;
+
+            /* point to new, empty stored block */
+            log->last += 4 + log->stored + 1;
+            log->stored = 0;
+        }
+
+        /* mark last block as last, update its length */
+        if (log_last(log, 1))
+            return -1;
+        BAIL(2);
     }
+
+    /* write the new crc and length trailer, and truncate just in case (could
+       be recovering from partial append with a missing foo.add file) */
+    PUT4(buf, log->tcrc);
+    PUT4(buf + 4, log->tlen);
+    if (write(log->fd, buf, 8) != 8 ||
+        (end = lseek(log->fd, 0, SEEK_CUR)) < 0 || ftruncate(log->fd, end))
+        return -1;
+
+    /* write the extra field, marking the log file as done, delete .add file */
+    if (log_mark(log, NO_OP))
+        return -1;
+    strcpy(log->end, ".add");
+    unlink(log->path);          /* ignore error, since may not exist */
+    return 0;
 }
 
-/* write an off_t little-endian to byte buffer */
-local void dice_off(off_t val, unsigned char *buf)
+/* Replace the foo.dict file with the foo.temp file.  Also delete the foo.add
+   file, since the compress operation may have been interrupted before that was
+   done.  Returns 1 if memory could not be allocated, or -1 if reading or
+   writing foo.gz fails, or if the rename fails for some reason other than
+   foo.temp not existing.  foo.temp not existing is a permitted error, since
+   the replace operation may have been interrupted after the rename is done,
+   but before foo.gz is marked as complete. */
+local int log_replace(struct log *log)
 {
-    int n;
+    int ret;
+    char *dest;
+
+    /* delete foo.add file */
+    strcpy(log->end, ".add");
+    unlink(log->path);         /* ignore error, since may not exist */
+    BAIL(3);
+
+    /* rename foo.name to foo.dict, replacing foo.dict if it exists */
+    strcpy(log->end, ".dict");
+    dest = malloc(strlen(log->path) + 1);
+    if (dest == NULL)
+        return -2;
+    strcpy(dest, log->path);
+    strcpy(log->end, ".temp");
+    ret = rename(log->path, dest);
+    free(dest);
+    if (ret && errno != ENOENT)
+        return -1;
+    BAIL(4);
 
-    for (n = 0; n < 8; n++) {
-        *buf++ = val & 0xff;
-        val >>= 8;
+    /* mark the foo.gz file as done */
+    return log_mark(log, NO_OP);
+}
+
+/* Compress the len bytes at data and append the compressed data to the
+   foo.gz deflate data immediately after the previous compressed data.  This
+   overwrites the previous uncompressed data, which was stored in foo.add
+   and is the data provided in data[0..len-1].  If this operation is
+   interrupted, it picks up at the start of this routine, with the foo.add
+   file read in again.  If there is no data to compress (len == 0), then we
+   simply terminate the foo.gz file after the previously compressed data,
+   appending a final empty stored block and the gzip trailer.  Return -1 if
+   reading or writing the log.gz file failed, or -2 if there was a memory
+   allocation failure. */
+local int log_compress(struct log *log, unsigned char *data, size_t len)
+{
+    int fd;
+    uint got, max;
+    ssize_t dict;
+    off_t end;
+    z_stream strm;
+    unsigned char buf[DICT];
+
+    /* compress and append compressed data */
+    if (len) {
+        /* set up for deflate, allocating memory */
+        strm.zalloc = Z_NULL;
+        strm.zfree = Z_NULL;
+        strm.opaque = Z_NULL;
+        if (deflateInit2(&strm, Z_DEFAULT_COMPRESSION, Z_DEFLATED, -15, 8,
+                         Z_DEFAULT_STRATEGY) != Z_OK)
+            return -2;
+
+        /* read in dictionary (last 32K of data that was compressed) */
+        strcpy(log->end, ".dict");
+        fd = open(log->path, O_RDONLY, 0);
+        if (fd >= 0) {
+            dict = read(fd, buf, DICT);
+            close(fd);
+            if (dict < 0) {
+                deflateEnd(&strm);
+                return -1;
+            }
+            if (dict)
+                deflateSetDictionary(&strm, buf, (uint)dict);
+        }
+        log_touch(log);
+
+        /* prime deflate with last bits of previous block, position write
+           pointer to write those bits and overwrite what follows */
+        if (lseek(log->fd, log->first - (log->back > 8 ? 2 : 1),
+                SEEK_SET) < 0 ||
+            read(log->fd, buf, 1) != 1 || lseek(log->fd, -1, SEEK_CUR) < 0) {
+            deflateEnd(&strm);
+            return -1;
+        }
+        deflatePrime(&strm, (8 - log->back) & 7, *buf);
+
+        /* compress, finishing with a partial non-last empty static block */
+        strm.next_in = data;
+        max = (((uint)0 - 1) >> 1) + 1; /* in case int smaller than size_t */
+        do {
+            strm.avail_in = len > max ? max : (uint)len;
+            len -= strm.avail_in;
+            do {
+                strm.avail_out = DICT;
+                strm.next_out = buf;
+                deflate(&strm, len ? Z_NO_FLUSH : Z_PARTIAL_FLUSH);
+                got = DICT - strm.avail_out;
+                if (got && write(log->fd, buf, got) != got) {
+                    deflateEnd(&strm);
+                    return -1;
+                }
+                log_touch(log);
+            } while (strm.avail_out == 0);
+        } while (len);
+        deflateEnd(&strm);
+        BAIL(5);
+
+        /* find start of empty static block -- scanning backwards the first one
+           bit is the second bit of the block, if the last byte is zero, then
+           we know the byte before that has a one in the top bit, since an
+           empty static block is ten bits long */
+        if ((log->first = lseek(log->fd, -1, SEEK_CUR)) < 0 ||
+            read(log->fd, buf, 1) != 1)
+            return -1;
+        log->first++;
+        if (*buf) {
+            log->back = 1;
+            while ((*buf & ((uint)1 << (8 - log->back++))) == 0)
+                ;       /* guaranteed to terminate, since *buf != 0 */
+        }
+        else
+            log->back = 10;
+
+        /* update compressed crc and length */
+        log->ccrc = log->tcrc;
+        log->clen = log->tlen;
+    }
+    else {
+        /* no data to compress -- fix up existing gzip stream */
+        log->tcrc = log->ccrc;
+        log->tlen = log->clen;
     }
+
+    /* complete and truncate gzip stream */
+    log->last = log->first;
+    log->stored = 0;
+    PUT4(buf, log->tcrc);
+    PUT4(buf + 4, log->tlen);
+    if (log_last(log, 1) || write(log->fd, buf, 8) != 8 ||
+        (end = lseek(log->fd, 0, SEEK_CUR)) < 0 || ftruncate(log->fd, end))
+        return -1;
+    BAIL(6);
+
+    /* mark as being in the replace operation */
+    if (log_mark(log, REPLACE_OP))
+        return -1;
+
+    /* execute the replace operation and mark the file as done */
+    return log_replace(log);
 }
 
-/* initial, empty gzip file for appending */
-local char empty_gz[] = {
-    0x1f, 0x8b,                 /* magic gzip id */
-    8,                          /* compression method is deflate */
-    4,                          /* there is an extra field */
-    0, 0, 0, 0,                 /* no modification time provided */
-    0, 0xff,                    /* no extra flags, no OS */
-    20, 0, 'a', 'p', 16, 0,     /* extra field with "ap" subfield */
-    32, 0, 0, 0, 0, 0, 0, 0,    /* offset of uncompressed data */
-    32, 0, 0, 0, 0, 0, 0, 0,    /* offset of last block */
-    1, 0, 0, 0xff, 0xff,        /* empty stored block (last) */
-    0, 0, 0, 0,                 /* crc */
-    0, 0, 0, 0                  /* uncompressed length */
-};
+/* log a repair record to the .repairs file */
+local void log_log(struct log *log, int op, char *record)
+{
+    time_t now;
+    FILE *rec;
 
-/* initialize a log object with locking */
-void *gzlog_open(char *path)
+    now = time(NULL);
+    strcpy(log->end, ".repairs");
+    rec = fopen(log->path, "a");
+    if (rec == NULL)
+        return;
+    fprintf(rec, "%.24s %s recovery: %s\n", ctime(&now), op == APPEND_OP ?
+            "append" : (op == COMPRESS_OP ? "compress" : "replace"), record);
+    fclose(rec);
+    return;
+}
+
+/* Recover the interrupted operation op.  First read foo.add for recovering an
+   append or compress operation.  Return -1 if there was an error reading or
+   writing foo.gz or reading an existing foo.add, or -2 if there was a memory
+   allocation failure. */
+local int log_recover(struct log *log, int op)
 {
-    unsigned xlen;
-    unsigned char temp[20];
-    unsigned sub_len;
-    int good;
-    gz_log *log;
-
-    /* allocate log structure */
-    log = malloc(sizeof(gz_log));
-    if (log == NULL)
-        return NULL;
-    log->id = GZLOGID;
+    int fd, ret = 0;
+    unsigned char *data = NULL;
+    size_t len = 0;
+    struct stat st;
 
-    /* open file, creating it if necessary, and locking it */
-    log->fd = open(path, O_RDWR | O_CREAT, 0600);
-    if (log->fd < 0) {
-        free(log);
-        return NULL;
+    /* log recovery */
+    log_log(log, op, "start");
+
+    /* load foo.add file if expected and present */
+    if (op == APPEND_OP || op == COMPRESS_OP) {
+        strcpy(log->end, ".add");
+        if (stat(log->path, &st) == 0 && st.st_size) {
+            len = (size_t)(st.st_size);
+            if (len != st.st_size || (data = malloc(st.st_size)) == NULL) {
+                log_log(log, op, "allocation failure");
+                return -2;
+            }
+            if ((fd = open(log->path, O_RDONLY, 0)) < 0) {
+                log_log(log, op, ".add file read failure");
+                return -1;
+            }
+            ret = read(fd, data, len) != len;
+            close(fd);
+            if (ret) {
+                log_log(log, op, ".add file read failure");
+                return -1;
+            }
+            log_log(log, op, "loaded .add file");
+        }
+        else
+            log_log(log, op, "missing .add file!");
+    }
+
+    /* recover the interrupted operation */
+    switch (op) {
+    case APPEND_OP:
+        ret = log_append(log, data, len);
+        break;
+    case COMPRESS_OP:
+        ret = log_compress(log, data, len);
+        break;
+    case REPLACE_OP:
+        ret = log_replace(log);
     }
-    if (lock(log->fd)) {
+
+    /* log status */
+    log_log(log, op, ret ? "failure" : "complete");
+
+    /* clean up */
+    if (data != NULL)
+        free(data);
+    return ret;
+}
+
+/* Close the foo.gz file (if open) and release the lock. */
+local void log_close(struct log *log)
+{
+    if (log->fd >= 0)
         close(log->fd);
-        free(log);
-        return NULL;
+    log->fd = -1;
+    log_unlock(log);
+}
+
+/* Open foo.gz, verify the header, and load the extra field contents, after
+   first creating the foo.lock file to gain exclusive access to the foo.*
+   files.  If foo.gz does not exist or is empty, then write the initial header,
+   extra, and body content of an empty foo.gz log file.  If there is an error
+   creating the lock file due to access restrictions, or an error reading or
+   writing the foo.gz file, or if the foo.gz file is not a proper log file for
+   this object (e.g. not a gzip file or does not contain the expected extra
+   field), then return true.  If there is an error, the lock is released.
+   Otherwise, the lock is left in place. */
+local int log_open(struct log *log)
+{
+    int op;
+
+    /* release open file resource if left over -- can occur if lock lost
+       between gzlog_open() and gzlog_write() */
+    if (log->fd >= 0)
+        close(log->fd);
+    log->fd = -1;
+
+    /* negotiate exclusive access */
+    if (log_lock(log) < 0)
+        return -1;
+
+    /* open the log file, foo.gz */
+    strcpy(log->end, ".gz");
+    log->fd = open(log->path, O_RDWR | O_CREAT, 0644);
+    if (log->fd < 0) {
+        log_close(log);
+        return -1;
     }
 
-    /* if file is empty, write new gzip stream */
+    /* if new, initialize foo.gz with an empty log, delete old dictionary */
     if (lseek(log->fd, 0, SEEK_END) == 0) {
-        if (write(log->fd, empty_gz, sizeof(empty_gz)) != sizeof(empty_gz)) {
-            log_clean(log);
-            return NULL;
+        if (write(log->fd, log_gzhead, HEAD) != HEAD ||
+            write(log->fd, log_gzext, EXTRA) != EXTRA ||
+            write(log->fd, log_gzbody, BODY) != BODY) {
+            log_close(log);
+            return -1;
         }
+        strcpy(log->end, ".dict");
+        unlink(log->path);
     }
 
-    /* check gzip header */
-    (void)lseek(log->fd, 0, SEEK_SET);
-    if (read(log->fd, temp, 12) != 12 || temp[0] != 0x1f ||
-        temp[1] != 0x8b || temp[2] != 8 || (temp[3] & 4) == 0) {
-        log_clean(log);
-        return NULL;
+    /* verify log file and load extra field information */
+    if ((op = log_head(log)) < 0) {
+        log_close(log);
+        return -1;
     }
 
-    /* process extra field to find "ap" sub-field */
-    xlen = temp[10] + (temp[11] << 8);
-    good = 0;
-    while (xlen) {
-        if (xlen < 4 || read(log->fd, temp, 4) != 4)
-            break;
-        sub_len = temp[2];
-        sub_len += temp[3] << 8;
-        xlen -= 4;
-        if (memcmp(temp, "ap", 2) == 0 && sub_len == 16) {
-            good = 1;
-            break;
-        }
-        if (xlen < sub_len)
-            break;
-        (void)lseek(log->fd, sub_len, SEEK_CUR);
-        xlen -= sub_len;
+    /* check for interrupted process and if so, recover */
+    if (op != NO_OP && log_recover(log, op)) {
+        log_close(log);
+        return -1;
     }
-    if (!good) {
-        log_clean(log);
+
+    /* touch the lock file to prevent another process from grabbing it */
+    log_touch(log);
+    return 0;
+}
+
+/* See gzlog.h for the description of the external methods below */
+gzlog *gzlog_open(char *path)
+{
+    size_t n;
+    struct log *log;
+
+    /* check arguments */
+    if (path == NULL || *path == 0)
         return NULL;
-    }
 
-    /* read in "ap" sub-field */
-    log->extra = lseek(log->fd, 0, SEEK_CUR);
-    if (read(log->fd, temp, 16) != 16) {
-        log_clean(log);
+    /* allocate and initialize log structure */
+    log = malloc(sizeof(struct log));
+    if (log == NULL)
+        return NULL;
+    strcpy(log->id, LOGID);
+    log->fd = -1;
+
+    /* save path and end of path for name construction */
+    n = strlen(path);
+    log->path = malloc(n + 9);              /* allow for ".repairs" */
+    if (log->path == NULL) {
+        free(log);
         return NULL;
     }
-    log->mark_off = make_off(temp);
-    log->last_off = make_off(temp + 8);
-
-    /* get crc, length of gzip file */
-    (void)lseek(log->fd, log->last_off, SEEK_SET);
-    if (read(log->fd, temp, 13) != 13 ||
-        memcmp(temp, "\001\000\000\377\377", 5) != 0) {
-        log_clean(log);
+    strcpy(log->path, path);
+    log->end = log->path + n;
+
+    /* gain exclusive access and verify log file -- may perform a
+       recovery operation if needed */
+    if (log_open(log)) {
+        free(log->path);
+        free(log);
         return NULL;
     }
-    log->crc = make_ulg(temp + 5);
-    log->len = make_ulg(temp + 9);
 
-    /* set up to write over empty last block */
-    (void)lseek(log->fd, log->last_off + 5, SEEK_SET);
-    log->stored = 0;
-    return (void *)log;
+    /* return pointer to log structure */
+    return log;
 }
 
-/* maximum amount to put in a stored block before starting a new one */
-#define MAX_BLOCK 16384
-
-/* write a block to a log object */
-int gzlog_write(void *obj, char *data, size_t len)
+/* gzlog_compress() return values:
+    0: all good
+   -1: file i/o error (usually access issue)
+   -2: memory allocation failure
+   -3: invalid log pointer argument */
+int gzlog_compress(gzlog *logd)
 {
-    size_t some;
-    unsigned char temp[5];
-    gz_log *log;
+    int fd, ret;
+    uint block;
+    size_t len, next;
+    unsigned char *data, buf[5];
+    struct log *log = logd;
 
-    /* check object */
-    log = (gz_log *)obj;
-    if (log == NULL || log->id != GZLOGID)
-        return 1;
+    /* check arguments */
+    if (log == NULL || strcmp(log->id, LOGID) || len < 0)
+        return -3;
 
-    /* write stored blocks until all of the input is written */
-    do {
-        some = MAX_BLOCK - log->stored;
-        if (some > len)
-            some = len;
-        if (write(log->fd, data, some) != some)
-            return 1;
-        log->crc = crc32(log->crc, data, some);
-        log->len += some;
-        len -= some;
-        data += some;
-        log->stored += some;
-
-        /* if the stored block is full, end it and start another */
-        if (log->stored == MAX_BLOCK) {
-            (void)lseek(log->fd, log->last_off, SEEK_SET);
-            temp[0] = 0;
-            dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16),
-                     temp + 1);
-            if (write(log->fd, temp, 5) != 5)
-                return 1;
-            log->last_off = lseek(log->fd, log->stored, SEEK_CUR);
-            (void)lseek(log->fd, 5, SEEK_CUR);
-            log->stored = 0;
-        }
-    } while (len);
-    return 0;
-}
+    /* see if we lost the lock -- if so get it again and reload the extra
+       field information (it probably changed), recover last operation if
+       necessary */
+    if (log_check(log) && log_open(log))
+        return -1;
 
-/* recompress the remaining stored deflate data in place */
-local int recomp(gz_log *log)
-{
-    z_stream strm;
-    size_t len, max;
-    unsigned char *in;
-    unsigned char *out;
-    unsigned char temp[16];
-
-    /* allocate space and read it all in (it's around 1 MB) */
-    len = log->last_off - log->mark_off;
-    max = len + (len >> 12) + (len >> 14) + 11;
-    out = malloc(max);
-    if (out == NULL)
-        return 1;
-    in = malloc(len);
-    if (in == NULL) {
-        free(out);
-        return 1;
-    }
-    (void)lseek(log->fd, log->mark_off, SEEK_SET);
-    if (read(log->fd, in, len) != len) {
-        free(in);
-        free(out);
-        return 1;
-    }
+    /* create space for uncompressed data */
+    len = ((size_t)(log->last - log->first) & ~(((size_t)1 << 10) - 1)) +
+          log->stored;
+    if ((data = malloc(len)) == NULL)
+        return -2;
 
-    /* recompress in memory, decoding stored data as we go */
-    /* note: this assumes that unsigned is four bytes or more */
-    /*       consider not making that assumption */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    if (deflateInit2(&strm, Z_BEST_COMPRESSION, Z_DEFLATED, -15, 8,
-        Z_DEFAULT_STRATEGY) != Z_OK) {
-        free(in);
-        free(out);
-        return 1;
-    }
-    strm.next_in = in;
-    strm.avail_out = max;
-    strm.next_out = out;
-    while (len >= 5) {
-        if (strm.next_in[0] != 0)
+    /* do statement here is just a cheap trick for error handling */
+    do {
+        /* read in the uncompressed data */
+        if (lseek(log->fd, log->first - 1, SEEK_SET) < 0)
             break;
-        strm.avail_in = strm.next_in[1] + (strm.next_in[2] << 8);
-        strm.next_in += 5;
-        len -= 5;
-        if (strm.avail_in != 0) {
-            if (len < strm.avail_in)
+        next = 0;
+        while (next < len) {
+            if (read(log->fd, buf, 5) != 5)
                 break;
-            len -= strm.avail_in;
-            (void)deflate(&strm, Z_NO_FLUSH);
-            if (strm.avail_in != 0 || strm.avail_out == 0)
+            block = PULL2(buf + 1);
+            if (next + block > len ||
+                read(log->fd, (char *)data + next, block) != block)
                 break;
+            next += block;
         }
-    }
-    (void)deflate(&strm, Z_SYNC_FLUSH);
-    (void)deflateEnd(&strm);
-    free(in);
-    if (len != 0 || strm.avail_out == 0) {
-        free(out);
-        return 1;
-    }
+        if (lseek(log->fd, 0, SEEK_CUR) != log->last + 4 + log->stored)
+            break;
+        log_touch(log);
 
-    /* overwrite stored data with compressed data */
-    (void)lseek(log->fd, log->mark_off, SEEK_SET);
-    len = max - strm.avail_out;
-    if (write(log->fd, out, len) != len) {
-        free(out);
-        return 1;
-    }
-    free(out);
-
-    /* write last empty block, crc, and length */
-    log->mark_off = log->last_off = lseek(log->fd, 0, SEEK_CUR);
-    temp[0] = 1;
-    dice_ulg(0xffffL << 16, temp + 1);
-    dice_ulg(log->crc, temp + 5);
-    dice_ulg(log->len, temp + 9);
-    if (write(log->fd, temp, 13) != 13)
-        return 1;
+        /* write the uncompressed data to the .add file */
+        strcpy(log->end, ".add");
+        fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+        if (fd < 0)
+            break;
+        ret = write(fd, data, len) != len;
+        if (ret | close(fd))
+            break;
+        log_touch(log);
 
-    /* truncate file to discard remaining stored data and old trailer */
-    ftruncate(log->fd, lseek(log->fd, 0, SEEK_CUR));
+        /* write the dictionary for the next compress to the .temp file */
+        strcpy(log->end, ".temp");
+        fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+        if (fd < 0)
+            break;
+        next = DICT > len ? len : DICT;
+        ret = write(fd, (char *)data + len - next, next) != next;
+        if (ret | close(fd))
+            break;
+        log_touch(log);
 
-    /* update extra field to point to new last empty block */
-    (void)lseek(log->fd, log->extra, SEEK_SET);
-    dice_off(log->mark_off, temp);
-    dice_off(log->last_off, temp + 8);
-    if (write(log->fd, temp, 16) != 16)
-        return 1;
-    return 0;
-}
+        /* roll back to compressed data, mark the compress in progress */
+        log->last = log->first;
+        log->stored = 0;
+        if (log_mark(log, COMPRESS_OP))
+            break;
+        BAIL(7);
+
+        /* compress and append the data (clears mark) */
+        ret = log_compress(log, data, len);
+        free(data);
+        return ret;
+    } while (0);
 
-/* maximum accumulation of stored blocks before compressing */
-#define MAX_STORED 1048576
+    /* broke out of do above on i/o error */
+    free(data);
+    return -1;
+}
 
-/* close log object */
-int gzlog_close(void *obj)
+/* gzlog_write() return values:
+    0: all good
+   -1: file i/o error (usually access issue)
+   -2: memory allocation failure
+   -3: invalid log pointer argument */
+int gzlog_write(gzlog *logd, void *data, size_t len)
 {
-    unsigned char temp[8];
-    gz_log *log;
+    int fd, ret;
+    struct log *log = logd;
 
-    /* check object */
-    log = (gz_log *)obj;
-    if (log == NULL || log->id != GZLOGID)
-        return 1;
+    /* check arguments */
+    if (log == NULL || strcmp(log->id, LOGID) || len < 0)
+        return -3;
+    if (data == NULL || len == 0)
+        return 0;
 
-    /* go to start of most recent block being written */
-    (void)lseek(log->fd, log->last_off, SEEK_SET);
-
-    /* if some stuff was put there, update block */
-    if (log->stored) {
-        temp[0] = 0;
-        dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16),
-                 temp + 1);
-        if (write(log->fd, temp, 5) != 5)
-            return 1;
-        log->last_off = lseek(log->fd, log->stored, SEEK_CUR);
-    }
+    /* see if we lost the lock -- if so get it again and reload the extra
+       field information (it probably changed), recover last operation if
+       necessary */
+    if (log_check(log) && log_open(log))
+        return -1;
 
-    /* write last block (empty) */
-    if (write(log->fd, "\001\000\000\377\377", 5) != 5)
-        return 1;
+    /* create and write .add file */
+    strcpy(log->end, ".add");
+    fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+    if (fd < 0)
+        return -1;
+    ret = write(fd, data, len) != len;
+    if (ret | close(fd))
+        return -1;
+    log_touch(log);
 
-    /* write updated crc and uncompressed length */
-    dice_ulg(log->crc, temp);
-    dice_ulg(log->len, temp + 4);
-    if (write(log->fd, temp, 8) != 8)
-        return 1;
+    /* mark log file with append in progress */
+    if (log_mark(log, APPEND_OP))
+        return -1;
+    BAIL(8);
 
-    /* put offset of that last block in gzip extra block */
-    (void)lseek(log->fd, log->extra + 8, SEEK_SET);
-    dice_off(log->last_off, temp);
-    if (write(log->fd, temp, 8) != 8)
-        return 1;
+    /* append data (clears mark) */
+    if (log_append(log, data, len))
+        return -1;
 
-    /* if more than 1 MB stored, then time to compress it */
-    if (log->last_off - log->mark_off > MAX_STORED) {
-        if (recomp(log))
-            return 1;
-    }
+    /* check to see if it's time to compress -- if not, then done */
+    if (((log->last - log->first) >> 10) + (log->stored >> 10) < TRIGGER)
+        return 0;
+
+    /* time to compress */
+    return gzlog_compress(log);
+}
+
+/* gzlog_close() return values:
+    0: ok
+   -3: invalid log pointer argument */
+int gzlog_close(gzlog *logd)
+{
+    struct log *log = logd;
 
-    /* unlock and close file */
-    log_clean(log);
+    /* check arguments */
+    if (log == NULL || strcmp(log->id, LOGID))
+        return -3;
+
+    /* close the log file and release the lock */
+    log_close(log);
+
+    /* free structure and return */
+    if (log->path != NULL)
+        free(log->path);
+    strcpy(log->id, "bad");
+    free(log);
     return 0;
 }