score: Remove CPU_PROVIDES_IDLE_THREAD_BODY

Remove the CPU_PROVIDES_IDLE_THREAD_BODY option to avoid unnecessary
conditional compilation.

Close #3539.

3 files changed, 1 insertions, 60 deletions

diff --git a/cpukit/score/cpu/sh/Makefile.am b/cpukit/score/cpu/sh/Makefile.am
index 37188443ff..b4a125fd81 100644
--- a/cpukit/score/cpu/sh/Makefile.am
+++ b/cpukit/score/cpu/sh/Makefile.am
@@ -4,6 +4,7 @@ noinst_LIBRARIES = libscorecpu.a
 libscorecpu_a_SOURCES = cpu.c context.c
 libscorecpu_a_SOURCES += ../no_cpu/cpucounterfrequency.c
 libscorecpu_a_SOURCES += ../no_cpu/cpucounterread.c
+libscorecpu_a_SOURCES += ../no_cpu/cpuidle.c
 libscorecpu_a_SOURCES += sh-exception-frame-print.c
 libscorecpu_a_CPPFLAGS = $(AM_CPPFLAGS)
 
diff --git a/cpukit/score/cpu/sh/cpu.c b/cpukit/score/cpu/sh/cpu.c
index 8988da98ce..b1e8766ff0 100644
--- a/cpukit/score/cpu/sh/cpu.c
+++ b/cpukit/score/cpu/sh/cpu.c
@@ -175,34 +175,6 @@ void _CPU_ISR_install_vector(
  _ISR_Vector_table[ vector ] = new_handler;
 }
 
-/*
- *  _CPU_Thread_Idle_body
- *
- *  NOTES:
- *
- *  1. This is the same as the regular CPU independent algorithm.
- *
- *  2. If you implement this using a "halt", "idle", or "shutdown"
- *     instruction, then don't forget to put it in an infinite loop.
- *
- *  3. Be warned. Some processors with onboard DMA have been known
- *     to stop the DMA if the CPU were put in IDLE mode.  This might
- *     also be a problem with other on-chip peripherals.  So use this
- *     hook with caution.
- */
-
-#if (CPU_PROVIDES_IDLE_THREAD_BODY == TRUE)
-void *_CPU_Thread_Idle_body( uintptr_t ignored )
-{
-
-  for( ; ; )
-    {
-      __asm__ volatile("nop");
-    }
-    /* insert your "halt" instruction here */ ;
-}
-#endif
-
 void _CPU_Context_Initialize(
   Context_Control	*_the_context,
   void			*_stack_base,
diff --git a/cpukit/score/cpu/sh/include/rtems/score/cpu.h b/cpukit/score/cpu/sh/include/rtems/score/cpu.h
index a61355d858..61d8e56448 100644
--- a/cpukit/score/cpu/sh/include/rtems/score/cpu.h
+++ b/cpukit/score/cpu/sh/include/rtems/score/cpu.h
@@ -148,29 +148,6 @@ extern "C" {
 #define CPU_ENABLE_ROBUST_THREAD_DISPATCH FALSE
 
 /*
- *  Does this port provide a CPU dependent IDLE task implementation?
- *
- *  If TRUE, then the routine _CPU_Thread_Idle_body
- *  must be provided and is the default IDLE thread body instead of
- *  _CPU_Thread_Idle_body.
- *
- *  If FALSE, then use the generic IDLE thread body if the BSP does
- *  not provide one.
- *
- *  This is intended to allow for supporting processors which have
- *  a low power or idle mode.  When the IDLE thread is executed, then
- *  the CPU can be powered down.
- *
- *  The order of precedence for selecting the IDLE thread body is:
- *
- *    1.  BSP provided
- *    2.  CPU dependent (if provided)
- *    3.  generic (if no BSP and no CPU dependent)
- */
-
-#define CPU_PROVIDES_IDLE_THREAD_BODY    TRUE
-
-/*
  *  Does the stack grow up (toward higher addresses) or down
  *  (toward lower addresses)?
  *
@@ -594,15 +571,6 @@ void _CPU_ISR_install_vector(
   proc_ptr   *old_handler
 );
 
-/*
- *  _CPU_Thread_Idle_body
- *
- *  This routine is the CPU dependent IDLE thread body.
- *
- *  NOTE:  It need only be provided if CPU_PROVIDES_IDLE_THREAD_BODY
- *         is TRUE.
- */
-
 void *_CPU_Thread_Idle_body( uintptr_t ignored );
 
 /*