(CPU_swap_u32, CPU_swap_u16): Remove.

1 files changed, 1 insertions, 39 deletions

diff --git a/cpukit/score/cpu/powerpc/rtems/new-exceptions/cpu.h b/cpukit/score/cpu/powerpc/rtems/new-exceptions/cpu.h
index aff5cbb3d5..f7416e60c7 100644
--- a/cpukit/score/cpu/powerpc/rtems/new-exceptions/cpu.h
+++ b/cpukit/score/cpu/powerpc/rtems/new-exceptions/cpu.h
@@ -898,45 +898,7 @@ void _CPU_Fatal_error(
   uint32_t   _error
 );
 
-/*  The following routine swaps the endian format of an unsigned int.
- *  It must be static because it is referenced indirectly.
- *
- *  This version will work on any processor, but if there is a better
- *  way for your CPU PLEASE use it.  The most common way to do this is to:
- *
- *     swap least significant two bytes with 16-bit rotate
- *     swap upper and lower 16-bits
- *     swap most significant two bytes with 16-bit rotate
- *
- *  Some CPUs have special instructions which swap a 32-bit quantity in
- *  a single instruction (e.g. i486).  It is probably best to avoid
- *  an "endian swapping control bit" in the CPU.  One good reason is
- *  that interrupts would probably have to be disabled to insure that
- *  an interrupt does not try to access the same "chunk" with the wrong
- *  endian.  Another good reason is that on some CPUs, the endian bit
- *  endianness for ALL fetches -- both code and data -- so the code
- *  will be fetched incorrectly.
- */
- 
-static inline uint32_t CPU_swap_u32(
-  uint32_t value
-)
-{
-  uint32_t   swapped;
- 
-  asm volatile("rlwimi %0,%1,8,24,31;"
-	       "rlwimi %0,%1,24,16,23;"
-	       "rlwimi %0,%1,8,8,15;"
-	       "rlwimi %0,%1,24,0,7;" :
-	       "=&r" ((swapped)) : "r" ((value)));
-
-  return( swapped );
-}
-
-#define CPU_swap_u16( value ) \
-  (((value&0xff) << 8) | ((value >> 8)&0xff))
-
-#endif /* ndef ASM */
+#endif /* ASM */
 
 #ifdef __cplusplus
 }