Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

1 files changed, 65 insertions, 0 deletions

diff --git a/cpukit/score/cpu/nios2/include/rtems/score/nios2.h b/cpukit/score/cpu/nios2/include/rtems/score/nios2.h
new file mode 100644
index 0000000000..26d76bcbfa
--- /dev/null
+++ b/cpukit/score/cpu/nios2/include/rtems/score/nios2.h
@@ -0,0 +1,65 @@
+/**
+ * @file
+ *
+ * @brief NIOS II Set up Basic CPU Dependency Settings Based on
+ * Compiler Settings
+ *
+ * This file sets up basic CPU dependency settings based on
+ * compiler settings.  For example, it can determine if
+ * floating point is available.  This particular implementation
+ * is specific to the NIOS2 port.
+ */
+
+/*
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.org/license/LICENSE.
+ *
+ */
+
+#ifndef _RTEMS_SCORE_NIOS2_H
+#define _RTEMS_SCORE_NIOS2_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ *  This file contains the information required to build
+ *  RTEMS for a particular member of the NIOS2 family.
+ *  It does this by setting variables to indicate which
+ *  implementation dependent features are present in a particular
+ *  member of the family.
+ *
+ *  This is a good place to list all the known CPU models
+ *  that this port supports and which RTEMS CPU model they correspond
+ *  to.
+ */
+
+/*
+ *  Define the name of the CPU family and specific model.
+ */
+
+#define CPU_NAME "NIOS2"
+#define CPU_MODEL_NAME "nios2"
+
+/*
+ *  See also nios2-rtems-gcc -print-multi-lib for all valid combinations of
+ *
+ *    -mno-hw-mul
+ *    -mhw-mulx
+ *    -mstack-check
+ *    -pg
+ *    -EB
+ *    -mcustom-fpu-cfg=60-1
+ *    -mcustom-fpu-cfg=60-2
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTEMS_SCORE_NIOS2_H */