ftpfs: Always build FTP client

Move FTP client filesystem to separate library libftpfs.a.

Update #3419.

1 files changed, 0 insertions, 159 deletions

diff --git a/cpukit/libnetworking/rtems/ftpfs.h b/cpukit/libnetworking/rtems/ftpfs.h
deleted file mode 100644
index c1f615b85b..0000000000
--- a/cpukit/libnetworking/rtems/ftpfs.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/**
- * @file
- *
- * @brief File Transfer Protocol file system (FTP client).
- */
-
-/*
- * Copyright (c) 2009
- * embedded brains GmbH
- * Obere Lagerstr. 30
- * D-82178 Puchheim
- * Germany
- * <rtems@embedded-brains.de>
- *
- * (c) Copyright 2002
- * Thomas Doerfler
- * IMD Ingenieurbuero fuer Microcomputertechnik
- * Herbststr. 8
- * 82178 Puchheim, Germany
- * <Thomas.Doerfler@imd-systems.de>
- *
- * Modified by Sebastian Huber <sebastian.huber@embedded-brains.de>.
- *
- * This code has been created after closly inspecting "tftpdriver.c" from Eric
- * Norum.
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _RTEMS_FTPFS_H
-#define _RTEMS_FTPFS_H
-
-#include <sys/time.h>
-#include <sys/ioctl.h>
-
-#include <rtems/libio.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @defgroup rtems_ftpfs File Transfer Protocol File System
- *
- * @brief The FTP file system (FTP client) can be used to transfer files from
- * or to remote hosts.
- *
- * You can mount the FTP file system with a call to mount() or
- * mount_and_make_target_path() with the @ref RTEMS_FILESYSTEM_TYPE_FTPFS file
- * system type.
- *
- * You have to add @ref CONFIGURE_FILESYSTEM_FTPFS to your application
- * configuration.
- *
- * You can open files either read-only or write-only.  A seek is not allowed.
- * A close terminates the control and data connections.
- *
- * To open a file @c file.txt in the directory @c dir (relative to home
- * directory of the server) on a server named @c host using the user name
- * @c user and the password @c pw you must specify the following path:
- * <tt>/FTP/user:pw@@host/dir/file.txt</tt>.
- *
- * If the server is the default server specified in BOOTP, it can be ommitted:
- * <tt>/FTP/user:pw/dir/file.txt</tt>.
- *
- * The user name will be used for the password if it is ommitted:
- * <tt>/FTP/user@@host/dir/file.txt</tt>.
- *
- * For the data transfer passive (= default) and active (= fallback) mode are
- * supported.
- */
-/**@{**/
-
-/**
- * @brief Well-known port number for FTP control connection.
- */
-#define RTEMS_FTPFS_CTRL_PORT 21
-
-/**
- * @brief Default mount point for FTP file system.
- */
-#define RTEMS_FTPFS_MOUNT_POINT_DEFAULT "/FTP"
-
-/**
- * @brief FTP file system IO control requests.
- */
-typedef enum {
-  RTEMS_FTPFS_IOCTL_GET_VERBOSE = _IOR( 'd', 1, bool *),
-  RTEMS_FTPFS_IOCTL_SET_VERBOSE = _IOW( 'd', 1, bool *),
-  RTEMS_FTPFS_IOCTL_GET_TIMEOUT = _IOR( 'd', 2, struct timeval *),
-  RTEMS_FTPFS_IOCTL_SET_TIMEOUT = _IOW( 'd', 2, struct timeval *)
-} rtems_ftpfs_ioctl_numbers;
-
-/**
- * @brief Returns in @a verbose if the verbose mode is enabled or disabled for
- * the file system at @a mount_point.
- *
- * If @a mount_point is @c NULL the default mount point
- * @ref RTEMS_FTPFS_MOUNT_POINT_DEFAULT will be used.
- */
-rtems_status_code rtems_ftpfs_get_verbose( const char *mount_point, bool *verbose);
-
-/**
- * @brief Enables or disables the verbose mode if @a verbose is @c true or
- * @c false respectively for the file system at @a mount_point.
- *
- * In the enabled verbose mode the commands and replies of the FTP control
- * connections will be printed to standard error.
- *
- * If @a mount_point is @c NULL the default mount point
- * @ref RTEMS_FTPFS_MOUNT_POINT_DEFAULT will be used.
- */
-rtems_status_code rtems_ftpfs_set_verbose( const char *mount_point, bool verbose);
-
-/**
- * @brief Returns the current timeout value in @a timeout for the file system
- * at @a mount_point.
- *
- * If @a mount_point is @c NULL the default mount point
- * @ref RTEMS_FTPFS_MOUNT_POINT_DEFAULT will be used.
- */
-rtems_status_code rtems_ftpfs_get_timeout(
-  const char *mount_point,
-  struct timeval *timeout
-);
-
-/**
- * @brief Sets the timeout value to @a timeout for the file system at
- * @a mount_point.
- *
- * The timeout value will be used during connection establishment of active
- * data connections.  It will be also used for send and receive operations on
- * data and control connections.
- *
- * If @a mount_point is @c NULL the default mount point
- * @ref RTEMS_FTPFS_MOUNT_POINT_DEFAULT will be used.
- */
-rtems_status_code rtems_ftpfs_set_timeout(
-  const char *mount_point,
-  const struct timeval *timeout
-);
-
-/** @} */
-
-/**
- * @brief Do not call directly, use mount().
- */
-int rtems_ftpfs_initialize(
-  rtems_filesystem_mount_table_entry_t *mt_entry,
-  const void *data
-);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif