Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

1 files changed, 59 insertions, 0 deletions

diff --git a/cpukit/include/rtems/vmeintr.h b/cpukit/include/rtems/vmeintr.h
new file mode 100644
index 0000000000..74bda9bf08
--- /dev/null
+++ b/cpukit/include/rtems/vmeintr.h
@@ -0,0 +1,59 @@
+/**
+ * @file
+ * 
+ * @brief VMEbus Interface Library
+ *
+ * This file is the specification for the VMEbus interface library
+ * which should be provided by all BSPs for VMEbus Single Board
+ * Computers but currently only a few do so.
+ */
+
+/*
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.org/license/LICENSE.
+ */
+
+#ifndef _RTEMS_VMEINTR_H
+#define _RTEMS_VMEINTR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ *  This defines the mask which is used to determine which
+ *  interrupt levels are affected by a call to this package.
+ *  The LSB corresponds to VME interrupt 0 and the MSB
+ *  to VME interrupt 7.
+ *
+ */
+
+typedef uint8_t   VME_interrupt_Mask;
+
+/*
+ *  VME_interrupt_Disable
+ *
+ */
+
+void VME_interrupt_Disable (
+  VME_interrupt_Mask                mask                        /* IN  */
+);
+
+/*
+ *  VME_interrupt_Disable
+ *
+ */
+
+void VME_interrupt_Enable (
+  VME_interrupt_Mask                mask                        /* IN  */
+);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end of include file */