Renaming mcp750 to motorola_shared since that is the basis for both

the mvme2307 and mcp750 BSPs.  In addition, it can support many
Motorola PowerPC based VME and PCI boards.

23 files changed, 0 insertions, 1776 deletions

diff --git a/c/src/lib/libbsp/powerpc/mcp750/BOOTING b/c/src/lib/libbsp/powerpc/mcp750/BOOTING
deleted file mode 100644
index 5565fbb2b3..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/BOOTING
+++ /dev/null
@@ -1,78 +0,0 @@
-#
-#  $Id$
-#
-
-This file documents the on board monitor (PPCBUG) configuration used
-to be able to boot the archives located in powerpc-rtems/c/mcp750/bin.
-This information was provided by Eric Valette <valette@crf.canon.fr>
-
------------------------ ENV command--------------
-PPC1-Bug>env
-Bug or System environment [B/S] = B? 
-Field Service Menu Enable [Y/N] = N? 
-Probe System for Supported I/O Controllers [Y/N] = Y? 
-Auto-Initialize of NVRAM Header Enable [Y/N] = Y? 
-Network PReP-Boot Mode Enable [Y/N] = Y?                <====================
-SCSI Bus Reset on Debugger Startup [Y/N]   = N? 
-Primary SCSI Bus Negotiations Type [A/S/N] = A? 
-Primary SCSI Data Bus Width [W/N]          = N? 
-Secondary SCSI Identifier                  = "07"? 
-NVRAM Boot List (GEV.fw-boot-path) Boot Enable [Y/N]           = Y? 
-NVRAM Boot List (GEV.fw-boot-path) Boot at power-up only [Y/N] = Y? 
-NVRAM Boot List (GEV.fw-boot-path) Boot Abort Delay            = 5? 
-Auto Boot Enable [Y/N]           = Y? 
-Auto Boot at power-up only [Y/N] = Y? 
-Auto Boot Scan Enable [Y/N]      = Y? 
-Auto Boot Scan Device Type List  = FDISK/CDROM/TAPE/HDISK/? 
-Auto Boot Controller LUN   = 14? 
-Auto Boot Device LUN       = 40? 
-Auto Boot Partition Number = 03? 
-Auto Boot Abort Delay      = 7? 
-Auto Boot Default String [NULL for an empty string] = ? 
-ROM Boot Enable [Y/N]            = N? 
-ROM Boot at power-up only [Y/N]  = Y? 
-ROM Boot Abort Delay             = 5? 
-ROM Boot Direct Starting Address = FFF00000? 
-ROM Boot Direct Ending Address   = FFFFFFFC? 
-Network Auto Boot Enable [Y/N]           = N? 
-Network Auto Boot at power-up only [Y/N] = N? 
-Network Auto Boot Controller LUN = 00? 
-Network Auto Boot Device LUN     = 00? 
-Network Auto Boot Abort Delay    = 5? 
-Network Auto Boot Configuration Parameters Offset (NVRAM) = 00001000? 
-Memory Size Enable [Y/N]         = Y? 
-Memory Size Starting Address     = 00000000? 
-Memory Size Ending Address       = 02000000? 
-DRAM Speed in NANO Seconds       = 60? 
-ROM First Access Length (0 - 31) = 10? 
-ROM Next Access Length  (0 - 15) = 0? 
-DRAM Parity Enable [On-Detection/Always/Never - O/A/N]    = O? 
-L2Cache Parity Enable [On-Detection/Always/Never - O/A/N] = O? 
-PCI Interrupts Route Control Registers (PIRQ0/1/2/3) = 0A050000? 
-Serial Startup Code Master Enable [Y/N] = N? 
-Serial Startup Code LF Enable [Y/N] =     N? 
----------------------NIOT ---------------------------
-PPC1-Bug>niot
-Controller LUN =00? 
-Device LUN     =00? 
-Node Control Memory Address =03F9E000? 
-Client IP Address      =194.2.81.157? 
-Server IP Address      =194.2.81.241? 
-Subnet IP Address Mask =255.255.255.0? 
-Broadcast IP Address   =255.255.255.255? 
-Gateway IP Address     =194.2.81.254? 
-Boot File Name ("NULL" for None)     =debug-ppc? 
-Argument File Name ("NULL" for None) =? 
-Boot File Load Address         =001F0000? 
-Boot File Execution Address    =001F0000? 
-Boot File Execution Delay      =00000000? 
-Boot File Length               =00000000? 
-Boot File Byte Offset          =00000000? 
-BOOTP/RARP Request Retry       =05? 
-TFTP/ARP Request Retry         =05? 
-Trace Character Buffer Address =00000000? 
-BOOTP/RARP Request Control: Always/When-Needed (A/W)=W? 
-BOOTP/RARP Reply Update Control: Yes/No (Y/N)       =Y? 
---------------------------------------------------------
-
-
diff --git a/c/src/lib/libbsp/powerpc/mcp750/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/Makefile.in
deleted file mode 100644
index 8546f0c6cb..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/Makefile.in
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../..
-subdir = powerpc/mcp750
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/directory.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-SRCS = README
-
-all: $(SRCS)
-
-# wrapup is the one that actually builds and installs the library
-#  from the individual .rel files built in other directories
-SUBDIRS = clock console include pci residual openpic irq vectors start \
-    startup bootloader motorola wrapup
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/README b/c/src/lib/libbsp/powerpc/mcp750/README
deleted file mode 100644
index f6ffb8428d..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/README
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-#  $Id$
-#
-
-BSP NAME:           MCP750
-BOARD:              MCP750 from motorola
-BUS:                PCI
-CPU FAMILY:         ppc
-CPU:                PowerPC 750
-COPROCESSORS:       N/A
-MODE:               32 bit mode
-
-DEBUG MONITOR:      PPCBUG mode 
-
-PERIPHERALS
-===========
-TIMERS:             PPC internal Timebase register
-  RESOLUTION:         ???
-SERIAL PORTS:       simulated via bug
-REAL-TIME CLOCK:    PPC internal Decrementer register
-DMA:                none
-VIDEO:              none
-SCSI:               none
-NETWORKING:         DEC21140
-
-DRIVER INFORMATION
-==================
-CLOCK DRIVER:       PPC internal
-IOSUPP DRIVER:      N/A
-SHMSUPP:            N/A
-TIMER DRIVER:       PPC internal
-TTY DRIVER:         PPC internal
-
-STDIO
-=====
-PORT:               Console port 0
-ELECTRICAL:         na
-BAUD:               na
-BITS PER CHARACTER: na
-PARITY:             na
-STOP BITS:          na
-
-Notes
-=====
-
-Based on papyrus bsp which only really supports
-the PowerOpen ABI with an ELF assembler.
-
diff --git a/c/src/lib/libbsp/powerpc/mcp750/README.MVME2300 b/c/src/lib/libbsp/powerpc/mcp750/README.MVME2300
deleted file mode 100644
index 572a4b175b..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/README.MVME2300
+++ /dev/null
@@ -1,39 +0,0 @@
-This BSP was adapted from Eric Valette MCP750 Generic motorola
-port to MVME2300 by Jay Kulpinski <jskulpin@eng01.gdds.com>.
-In other to work correctly, the Tundra Universe chip must
-be turned off using PPCBug as explained below.
-
-
-
-
-The Tundra Universe chip is a bridge between the PCI and VME buses.
-It has four programmable mapping windows in each direction, much like
-the Raven.  PPCBUG lets you specify the mappings if you don't want
-to do it in your application.  The mappings on our board, which may
-or not be the default Motorola mappings, had one window appearing
-at 0x01000000 in PCI space.  This is the same place the bootloader
-code remapped the Raven registers.  The windows' mappings are 
-very likely to be application specific, so I wouldn't worry too
-much about setting them in the BSP, but it would be nice to have
-a standard interface to do so.  Whoever needs that first can 
-incorporate the ppcn_60x BSP code for the Universe chip. :-)
-
-These options in PPCBUG's ENV command did the job:
-
-VME3PCI Master Master Enable [Y/N] = Y?
-PCI Slave Image 0 Control                = 00000000?   <-----
-PCI Slave Image 0 Base Address Register  = 00000000?
-PCI Slave Image 0 Bound Address Register = 00000000?
-PCI Slave Image 0 Translation Offset     = 00000000?
-PCI Slave Image 1 Control                = 00000000?   <-----
-PCI Slave Image 1 Base Address Register  = 01000000?
-PCI Slave Image 1 Bound Address Register = 20000000?
-PCI Slave Image 1 Translation Offset     = 00000000?
-PCI Slave Image 2 Control                = 00000000?   <-----
-PCI Slave Image 2 Base Address Register  = 20000000?
-PCI Slave Image 2 Bound Address Register = 22000000?
-PCI Slave Image 2 Translation Offset     = D0000000?
-PCI Slave Image 3 Control                = 00000000?   <-----
-PCI Slave Image 3 Base Address Register  = 2FFF0000?
-PCI Slave Image 3 Bound Address Register = 30000000?
-PCI Slave Image 3 Translation Offset     = D0000000?        
diff --git a/c/src/lib/libbsp/powerpc/mcp750/README.OTHERBOARDS b/c/src/lib/libbsp/powerpc/mcp750/README.OTHERBOARDS
deleted file mode 100644
index 29d50292d6..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/README.OTHERBOARDS
+++ /dev/null
@@ -1,97 +0,0 @@
-#
-#  $Id$
-#
-
-This BSP is designed to support multiple Motorola PowerPC boards.  The
-following extract from some email from Eric Valette should provide
-the basic information required to use this BSP on other models.
-
-
-Joel>      + I am sure there are other Motorola boards which this BSP should
-Joel>        support.  If you know of other models that should work, list
-Joel>        them off to me.  I will make them aliases and note them as
-Joel>        untested in the status.
-
-Extract of motorola.c :
-
-static const mot_info_t mot_boards[] = {
-  {0x300, 0x00, "MVME 2400"},
-  {0x010, 0x00, "Genesis"},
-  {0x020, 0x00, "Powerstack (Series E)"},
-  {0x040, 0x00, "Blackhawk (Powerstack)"},
-  {0x050, 0x00, "Omaha (PowerStack II Pro3000)"},
-  {0x060, 0x00, "Utah (Powerstack II Pro4000)"},
-  {0x0A0, 0x00, "Powerstack (Series EX)"},
-  {0x1E0, 0xE0, "Mesquite cPCI (MCP750)"},
-  {0x1E0, 0xE1, "Sitka cPCI (MCPN750)"},
-  {0x1E0, 0xE2, "Mesquite cPCI (MCP750) w/ HAC"},
-  {0x1E0, 0xF6, "MTX Plus"},
-  {0x1E0, 0xF7, "MTX wo/ Parallel Port"},
-  {0x1E0, 0xF8, "MTX w/ Parallel Port"},
-  {0x1E0, 0xF9, "MVME 2300"},
-  {0x1E0, 0xFA, "MVME 2300SC/2600"},
-  {0x1E0, 0xFB, "MVME 2600 with MVME712M"},
-  {0x1E0, 0xFC, "MVME 2600/2700 with MVME761"},
-  {0x1E0, 0xFD, "MVME 3600 with MVME712M"},
-  {0x1E0, 0xFE, "MVME 3600 with MVME761"},
-  {0x1E0, 0xFF, "MVME 1600-001 or 1600-011"},
-  {0x000, 0x00, ""}
-};
-
-In theory, each board starting with 0x1E0 should be really straighforward
-to port (604 proc or above and raven host bridge...).
-
-Joel> Then we just have to add README.BOARD_MODEL and TIMES.BOARD_MODEL
-
-I should also make a README to explain that some file containing
-switch statement should be completed (e.g libbsp/powerpc/shared/irq_init.c 
-[NOTE: This is that README. :) ]
-
-       ------------------------------
-  if ( (currentBoard == MESQUITE) ) {
-    VIA_isa_bridge_interrupts_setup();
-    known_cpi_isa_bridge = 1;
-  }
-  if (!known_cpi_isa_bridge) {
-    printk("Please add code for PCI/ISA bridge init to libbsp/shared/irq/irq_init.c\n");
-    printk("If your card works correctly please add a test and set known_cpi_isa_bridge to true\n");
-  }
-       ------------------------------
-
-and libbsp/powerpc/mpc6xx/execeptions/raw_exception.c
-
-       -------------------------------
-
-int mpc604_vector_is_valid(rtems_vector vector)
-{
-  /*
-   * Please fill this for MVME2307
-   */
-  printk("Please complete libcpu/powerpc/XXX/raw_exception.c\n");
-  return 0;
-}
-
-int mpc60x_set_exception  (const rtems_raw_except_connect_data* except)
-{
-    unsigned int level;
-
-    if (current_ppc_cpu == PPC_750) {
-      if (!mpc750_vector_is_valid(except->exceptIndex)){
-        return 0;
-      }
-      goto exception_ok;
-    }
-    if (current_ppc_cpu == PPC_604) {
-      if (!mpc604_vector_is_valid(except->exceptIndex)){
-        return 0;
-      }
-      goto exception_ok;
-    }
-    printk("Please complete libcpu/powerpc/XXX/raw_exception.c\n");
-    return 0;
-    -----------------------------------
-
-NB : re readding the code I should have done a switch... TSSSS.A future patche
-     I think.
-
-
diff --git a/c/src/lib/libbsp/powerpc/mcp750/README.dec21140 b/c/src/lib/libbsp/powerpc/mcp750/README.dec21140
deleted file mode 100644
index 5b6c479d9f..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/README.dec21140
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-#  $Id$
-#
-
-The dec21140 network driver is found in libchip/networking.
diff --git a/c/src/lib/libbsp/powerpc/mcp750/bootloader/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/bootloader/Makefile.in
deleted file mode 100644
index 86ca29151d..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/bootloader/Makefile.in
+++ /dev/null
@@ -1,97 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/bootloader
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../../shared:@srcdir@/../../shared/console:@srcdir@/../../shared/bootloader
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = misc pci zlib mm em86 polled_io lib
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES = bootldr.h zlib.h pci.h
-
-# Assembly source names, if any, go here -- minus the .s
-S_PIECES = head exception em86real
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(S_O_FILES) $(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-CC_PIECES =
-CC_FILES = $(CC_PIECES:%=%.cc)
-CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o)
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS += -D__BOOT__ -DDEBUG
-CFLAGS += -msoft-float -mstrict-align -fno-builtin -Wall -mmultiple -mstring \
-    -O2 -fomit-frame-pointer -mrelocatable -ffixed-r13 -mno-sdata -D__BOOT__ \
-    -DDEBUG
-
-ASFLAGS += -mrelocatable
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-IMAGES = rtems.gz
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS += bootloader reloc.O
-CLOBBER_ADDITIONS += $(IMAGES)
-
-#
-# CAUTION :
-#
-# As we use very specific compilation options in this directory
-# we shall not use any other code. This includes the newlib libc.a
-# as well as other code located in .o files in mcp750 directory.
-#
-# NEVER remove lib.c. You have been warned...
-#
-bootloader : ${OBJS} $(IMAGES) $(BINARY_LOADED) ppcboot.lds
-	$(LD) -o bootloader $(OBJS) --just-symbols=$(BINARY_LOADED) \
-	-b binary $(IMAGES) -T @srcdir@/../../shared/bootloader/ppcboot.lds \
-	 -Map bootloader.map
-
-check_unresolved : ${OBJS}
-	$(LD) -r -o reloc.O ${OBJS}
-	$(NM) reloc.O |grep ' U '
-	echo "Every symbol listed should be defined in @srcdir@/ppcboot.lds"
-
-rtems.gz: $(BINARY_LOADED)
-	$(OBJCOPY)  $(BINARY_LOADED) rtems -O binary -R .comment -S 
-	gzip -vf9 rtems
-	rm -f rtems
-
-all: ${ARCH} $(SRCS) ${OBJ}
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/bsp_specs b/c/src/lib/libbsp/powerpc/mcp750/bsp_specs
deleted file mode 100644
index d89fb0096f..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/bsp_specs
+++ /dev/null
@@ -1,23 +0,0 @@
-%rename cpp old_cpp
-%rename lib old_lib
-%rename endfile old_endfile
-%rename startfile old_startfile
-%rename link old_link
-
-*cpp:
-%(old_cpp) %{qrtems: -D__embedded__} -Asystem(embedded)
-
-*lib:
-%{!qrtems: %(old_lib)} %{qrtems: --start-group \
-%{!qrtems_debug: -lrtemsall} %{qrtems_debug: -lrtemsall_g} \
--lc -lgcc --end-group  ecrtn%O%s \
-%{!qnolinkcmds: -T linkcmds%s}}
-
-*startfile:
-%{!qrtems: %(old_startfile)} %{qrtems:  ecrti%O%s \
-%{!qrtems_debug: start.o%s} \
-%{qrtems_debug: start_g.o%s}}
-
-*link:
-%{!qrtems: %(old_link)} %{qrtems: -Qy -dp -Bstatic -T linkcmds%s -e __rtems_entry_point -u __vectors}
-
diff --git a/c/src/lib/libbsp/powerpc/mcp750/clock/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/clock/Makefile.in
deleted file mode 100644
index 4490d4b392..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/clock/Makefile.in
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/clock
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../shared/clock
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = p_clock
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-SRCS = $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE)/bsp
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-all: ${ARCH} $(SRCS) $(OBJS)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/console/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/console/Makefile.in
deleted file mode 100644
index 71ccd2bf98..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/console/Makefile.in
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/console
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../shared/console:@srcdir@/../../../shared
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = polled_io uart console inch
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES = $(srcdir)/../../shared/console/consoleIo.h \
-    $(srcdir)/../../shared/console/keyboard.h \
-    $(srcdir)/../../shared/console/uart.h
-
-# Assembly source names, if any, go here -- minus the .s
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(S_O_FILES) $(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE)/bsp
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-CC_PIECES =
-CC_FILES = $(CC_PIECES:%=%.cc)
-CC_O_FILES = $(CC_PIECES:%=${ARCH}/%.o)
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-CPPFLAGS += -DSTATIC_LOG_ALLOC
-CFLAGS +=
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-all: ${ARCH} $(SRCS) ${OBJS}
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/include/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/include/Makefile.in
deleted file mode 100644
index a7d0a6e46e..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/include/Makefile.in
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/include
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-H_FILES = $(srcdir)/../../shared/include/nvram.h \
-	$(srcdir)/../../shared/include/bsp.h \
-	$(srcdir)/../../../shared/include/coverhd.h
-
-BSP_H_FILES = $(srcdir)/../../shared/console/consoleIo.h \
-    $(srcdir)/../../shared/console/uart.h $(srcdir)/../../shared/irq/irq.h \
-    $(srcdir)/../../shared/motorola/motorola.h
-
-#
-#  Equate files are for including from assembly preprocessed by
-#  gm4 or gasp.  No examples are provided except for those for
-#  other CPUs.  The best way to generate them would be to
-#  provide a program which generates the constants used based
-#  on the C equivalents.
-#
-
-EQ_FILES =
-
-SRCS = $(H_FILES) $(EQ_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-preinstall: 
-	$(mkinstalldirs) $(PROJECT_INCLUDE)
-	$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp
-	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)
-	@$(INSTALL_CHANGE) -m 644 $(BSP_H_FILES) $(PROJECT_INCLUDE)/bsp
-
-all: $(SRCS) preinstall
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/irq/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/irq/Makefile.in
deleted file mode 100644
index 2f9bb6ae04..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/irq/Makefile.in
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/irq
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../shared/irq
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = irq_init i8259 irq
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES = $(srcdir)/../../shared/irq/irq.h
-
-# Assembly source names, if any, go here -- minus the .s
-S_PIECES = irq_asm
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE)/bsp
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-all: ${ARCH} $(SRCS) ${OBJS}
-
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/motorola/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/motorola/Makefile.in
deleted file mode 100644
index 614960112f..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/motorola/Makefile.in
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/motorola
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../shared/motorola
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = motorola
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES = $(srcdir)/../../shared/motorola/motorola.h
-
-SRCS = $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE)/bsp
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-all: ${ARCH} $(SRCS) $(OBJS)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/openpic/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/openpic/Makefile.in
deleted file mode 100644
index 2f3e2c2c23..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/openpic/Makefile.in
+++ /dev/null
@@ -1,72 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/openpic
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../shared/openpic
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = $(OPENPIC_C_PIECES)
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES = $(srcdir)/../../shared/openpic/openpic.h
-
-SRCS = $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE)/bsp
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-OPENPIC_C_PIECES = openpic
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-preinstall: 
-	@$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp
-	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp
-
-all: ${ARCH} $(SRCS) preinstall $(OBJS)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/pci/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/pci/Makefile.in
deleted file mode 100644
index b2192fb262..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/pci/Makefile.in
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/pci
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../shared/pci
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = pci
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES = $(srcdir)/../../shared/pci/pci.h
-
-SRCS = $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE)/bsp
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-preinstall: 
-	@$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp
-	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp
-
-all: ${ARCH} $(SRCS) preinstall $(OBJS)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/residual/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/residual/Makefile.in
deleted file mode 100644
index e94f6fdb6f..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/residual/Makefile.in
+++ /dev/null
@@ -1,73 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/residual
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../shared/residual
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = $(RESIDUAL_C_PIECES)
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES = $(srcdir)/../../shared/residual/pnp.h \
-    $(srcdir)/../../shared/residual/residual.h
-
-SRCS = $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE)/bsp
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-RESIDUAL_C_PIECES = residual
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-preinstall: 
-	@$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp
-	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp
-
-all: ${ARCH} $(SRCS) preinstall $(OBJS)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/start/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/start/Makefile.in
deleted file mode 100644
index 704bfeb8e8..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/start/Makefile.in
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/start
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../shared/start
-
-PGM = ${ARCH}/start.o
-
-# C source names, if any, go here -- minus the .c
-C_PIECES =
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES = start
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-all: ${ARCH} $(SRCS) $(OBJS) $(PGM)
-	$(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/startup/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/startup/Makefile.in
deleted file mode 100644
index faf523d8c4..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/startup/Makefile.in
+++ /dev/null
@@ -1,74 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/startup
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../../shared:@srcdir@/../../shared/startup
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = bootcard main bspstart bsppost bsplibc sbrk bspclean \
-    gnatinstallhandler
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .s
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_RELEASE)/lib
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-all: ${ARCH} $(SRCS) $(OBJS)
-	$(INSTALL_VARIANT) -m 755 ${PGM} $(PROJECT_RELEASE)/lib
-	$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
-
-$(PROJECT_RELEASE)/lib/libbsp.a: 
-	cd ../wrapup; $(MAKE) $(AM_MAKEFLAGS)
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/startup/linkcmds b/c/src/lib/libbsp/powerpc/mcp750/startup/linkcmds
deleted file mode 100644
index 0eb6628de9..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/startup/linkcmds
+++ /dev/null
@@ -1,147 +0,0 @@
-OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc",
-              "elf32-powerpc")
-OUTPUT_ARCH(powerpc)
-ENTRY(_start)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-PROVIDE (__stack = 0);
-MEMORY {
-	VECTORS	: ORIGIN = 0x0 ,  LENGTH = 0x3000
-	CODE : ORIGIN = 0x3000 , LENGTH = 0x100000 
-}
-SECTIONS
-{
-  .entry_point_section :
-  {
-	*(.entry_point_section)
-  } > VECTORS
-
-  /*
-   * This section is used only if NO_DYNAMIC_EXCEPTION_VECTOR_INSTALL
-   * is defined in vectors/vectors.S
-   */
-  .vectors :
-  {
-    *(.vectors)
-  } > VECTORS
-
-  /* Read-only sections, merged into text segment: */
-  .interp   : { *(.interp) }	> CODE
-  .hash           : { *(.hash)          }	> CODE
-  .dynsym         : { *(.dynsym)                }	> CODE
-  .dynstr         : { *(.dynstr)                }	> CODE
-  .gnu.version   : { *(.gnu.version)      }	> CODE
-  .gnu.version_d   : { *(.gnu.version_d)  }	> CODE
-  .gnu.version_r   : { *(.gnu.version_r)  }	> CODE
-  .rela.text     :
-    { *(.rela.text) *(.rela.gnu.linkonce.t*) }	> CODE
-  .rela.data     :
-    { *(.rela.data) *(.rela.gnu.linkonce.d*) }	> CODE
-  .rela.rodata   :
-    { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }	> CODE
-  .rela.got       : { *(.rela.got)      }	> CODE
-  .rela.got1      : { *(.rela.got1)     }	> CODE
-  .rela.got2      : { *(.rela.got2)     }	> CODE
-  .rela.ctors     : { *(.rela.ctors)    }	> CODE
-  .rela.dtors     : { *(.rela.dtors)    }	> CODE
-  .rela.init      : { *(.rela.init)     }	> CODE
-  .rela.fini      : { *(.rela.fini)     }	> CODE
-  .rela.bss       : { *(.rela.bss)      }	> CODE
-  .rela.plt       : { *(.rela.plt)      }	> CODE
-  .rela.sdata     : { *(.rela.sdata)    }	> CODE
-  .rela.sbss      : { *(.rela.sbss)     }	> CODE
-  .rela.sdata2    : { *(.rela.sdata2)   }	> CODE
-  .rela.sbss2     : { *(.rela.sbss2)    }	> CODE
-  .text      :	
-  {
-    *(.text)	
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-  }  > CODE
-  .init           : { *(.init)          } 	> CODE
-  .fini           : { *(.fini)          } 	> CODE
-  .rodata         : { *(.rodata) *(.gnu.linkonce.r*) }	> CODE
-  .rodata1        : { *(.rodata1) }	> CODE
-  _etext = .;
-  PROVIDE (etext = .);
-  .sdata2   : { *(.sdata2) }	> CODE
-  .sbss2   : { *(.sbss2) }	> CODE
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  It would
-     be more correct to do this:
-       . = ALIGN(0x40000) + (ALIGN(8) & (0x40000 - 1));
-     The current expression does not correctly handle the case of a
-     text segment ending precisely at the end of a page; it causes the
-     data segment to skip a page.  The above expression does not have
-     this problem, but it will currently (2/95) cause BFD to allocate
-     a single segment, combining both text and data, for this case.
-     This will prevent the text segment from being shared among
-     multiple executions of the program; I think that is more
-     important than losing a page of the virtual address space (note
-     that no actual memory is lost; the page which is skipped can not
-     be referenced).  */
-  . = ALIGN(0x1000);
- .data    :
-  {
-    *(.data)
-    *(.gnu.linkonce.d*)	
-    CONSTRUCTORS
-  } > CODE
-  .data1   : { *(.data1) }	> CODE
-  PROVIDE (__EXCEPT_START__ = .);
-  .gcc_except_table   : { *(.gcc_except_table) } > CODE
-  PROVIDE (__EXCEPT_END__ = .);
-  .got1           : { *(.got1) }	> CODE
-  .dynamic        : { *(.dynamic) }	> CODE
-  /* Put .ctors and .dtors next to the .got2 section, so that the pointers
-     get relocated with -mrelocatable. Also put in the .fixup pointers.
-     The current compiler no longer needs this, but keep it around for 2.7.2  */
-                PROVIDE (_GOT2_START_ = .);
-  .got2           :  { *(.got2) }	> CODE
-                PROVIDE (__CTOR_LIST__ = .);
-  .ctors          : { *(.ctors) }	> CODE
-                PROVIDE (__CTOR_END__ = .);
-                PROVIDE (__DTOR_LIST__ = .);
-  .dtors          : { *(.dtors) }	> CODE
-                PROVIDE (__DTOR_END__ = .);
-                PROVIDE (_FIXUP_START_ = .);
-  .fixup          : { *(.fixup) }	> CODE
-                PROVIDE (_FIXUP_END_ = .);
-                PROVIDE (_GOT2_END_ = .);
-                PROVIDE (_GOT_START_ = .);
-  .got            : { *(.got) }	> CODE
-  .got.plt        : { *(.got.plt) }	> CODE
-                PROVIDE (_GOT_END_ = .);
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata          : { *(.sdata) }	> CODE
-  _edata  =  .;
-  PROVIDE (edata = .);
-  .sbss      :
-  {
-    PROVIDE (__sbss_start = .);
-    *(.sbss)
-    *(.scommon)
-    *(.dynsbss)
-    PROVIDE (__sbss_end = .);
-  } > CODE
-  .plt   : { *(.plt) }	> CODE
-  .bss       :
-  {
-   PROVIDE (__bss_start = .);
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  . = ALIGN(16);
-  } > CODE
-  . = ALIGN(16);
-  _end = . ;
-  __rtems_end = . ;
-  PROVIDE (end = .);
-  /DISCARD/ : 
-  {
-    *(.comment)
-  }
-}
diff --git a/c/src/lib/libbsp/powerpc/mcp750/times.mcp750 b/c/src/lib/libbsp/powerpc/mcp750/times.mcp750
deleted file mode 100644
index 2b637d66c5..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/times.mcp750
+++ /dev/null
@@ -1,189 +0,0 @@
-#

-#  Timing Test Suite Results for this BSP on the MCP750

-#

-#  $Id$

-#

-

-Thanks to Eric Valette <valette@crf.canon.fr> for running the timing

-tests and reporting this information.

-

-Target: 300 Mhz MCP750

-CPU: MPC750

-Clock Speed: 300 Mhz

-

-Times are reported in nanoseconds.

-

-Context Switch

-

-context switch: self_______________________________________________0.708

-context switch: to another task____________________________________0.649

-context switch: no floating point contexts_________________________2.360

-fp context switch: restore 1st FP task_____________________________6.490

-fp context switch: save initialized, restore initialized___________0.767

-fp context switch: save idle, restore initialized__________________0.885

-fp context switch: save idle, restore idle_________________________6.195

-

-Task Manager

-

-rtems_task_create__________________________________________________4.003

-rtems_task_ident___________________________________________________4.995

-rtems_task_start___________________________________________________1.587

-rtems_task_restart: calling task___________________________________1.788

-rtems_task_restart: suspended task -- returns to caller____________1.849

-rtems_task_restart: blocked task -- returns to caller______________2.082

-rtems_task_restart: ready task -- returns to caller________________1.863

-rtems_task_restart: suspended task -- preempts caller______________3.102

-rtems_task_restart: blocked task -- preempts caller_______________12.744

-rtems_task_restart: ready task -- preempts caller__________________3.009

-rtems_task_delete: calling task____________________________________6.592

-rtems_task_delete: suspended task__________________________________3.460

-rtems_task_delete: blocked task____________________________________3.555

-rtems_task_delete: ready task______________________________________3.797

-rtems_task_suspend: calling task___________________________________3.066

-rtems_task_suspend: returns to caller______________________________0.774

-rtems_task_resume: task readied -- returns to caller_______________0.733

-rtems_task_resume: task readied -- preempts caller_________________1.634

-rtems_task_set_priority: obtain current priority___________________0.524

-rtems_task_set_priority: returns to caller_________________________0.970

-rtems_task_set_priority: preempts caller___________________________3.686

-rtems_task_mode: obtain current mode_______________________________0.233

-rtems_task_mode: no reschedule_____________________________________0.231

-rtems_task_mode: reschedule -- returns to caller___________________1.711

-rtems_task_mode: reschedule -- preempts caller_____________________3.304

-rtems_task_get_note________________________________________________0.549

-rtems_task_set_note________________________________________________0.548

-rtems_task_wake_after: yield -- returns to caller__________________3.063

-rtems_task_wake_after: yields -- preempts caller___________________3.063

-rtems_task_wake_when_______________________________________________3.906

-

-Interrupt Manager

-

-interrupt entry overhead: returns to nested interrupt______________1.947

-interrupt entry overhead: returns to interrupted task______________2.891

-interrupt entry overhead: returns to preempting task_______________0.767

-interrupt exit overhead: returns to nested interrupt_______________0.177

-interrupt exit overhead: returns to interrupted task_______________0.885

-interrupt exit overhead: returns to preempting task________________2.950

-

-Clock Manager

-

-rtems_clock_set____________________________________________________1.380

-rtems_clock_get____________________________________________________0.164

-rtems_clock_tick___________________________________________________5.487

-

-Timer Manager

-

-rtems_timer_create_________________________________________________0.959

-rtems_timer_ident__________________________________________________4.822

-rtems_timer_delete: inactive_______________________________________0.749

-rtems_timer_delete: active_________________________________________0.815

-rtems_timer_fire_after: inactive___________________________________1.047

-rtems_timer_fire_after: active_____________________________________0.951

-rtems_timer_fire_when: inactive____________________________________1.145

-rtems_timer_fire_when: active______________________________________1.133

-rtems_timer_reset: inactive________________________________________0.848

-rtems_timer_reset: active__________________________________________0.892

-rtems_timer_cancel: inactive_______________________________________0.500

-rtems_timer_cancel: active_________________________________________0.552

-

-Semaphore Manager

-

-rtems_semaphore_create                                             4.248

-rtems_semaphore_ident______________________________________________5.614

-rtems_semaphore_delete_____________________________________________3.953

-rtems_semaphore_obtain: available__________________________________0.639

-rtems_semaphore_obtain: not available -- NO_WAIT___________________0.638

-rtems_semaphore_obtain: not available -- caller blocks_____________3.914

-rtems_semaphore_release: no waiting tasks__________________________0.825

-rtems_semaphore_release: task readied -- returns to caller_________1.175

-rtems_semaphore_release: task readied -- preempts caller___________2.789

-

-Message Queue Manager

-

-rtems_message_queue_create________________________________________48.380

-rtems_message_queue_ident__________________________________________4.936

-rtems_message_queue_delete_________________________________________2.891

-rtems_message_queue_send: no waiting tasks_________________________1.149

-rtems_message_queue_send: task readied -- returns to caller________1.489

-rtems_message_queue_send: task readied -- preempts caller__________3.000

-rtems_message_queue_urgent: no waiting tasks_______________________1.145

-rtems_message_queue_urgent: task readied -- returns to caller______1.508

-rtems_message_queue_urgent: task readied -- preempts caller________2.961

-rtems_message_queue_broadcast: no waiting tasks____________________0.866

-rtems_message_queue_broadcast: task readied -- returns to caller___9.735

-rtems_message_queue_broadcast: task readied -- preempts caller_____2.891

-rtems_message_queue_receive: available_____________________________0.874

-rtems_message_queue_receive: not available -- NO_WAIT______________0.757

-rtems_message_queue_receive: not available -- caller blocks________4.091

-rtems_message_queue_flush: no messages flushed_____________________0.554

-rtems_message_queue_flush: messages flushed________________________0.605

-

-Event Manager

-

-rtems_event_send: no task readied__________________________________0.542

-rtems_event_send: task readied -- returns to caller________________1.196

-rtems_event_send: task readied -- preempts caller__________________2.558

-rtems_event_receive: obtain current events_________________________0.082

-rtems_event_receive: available_____________________________________0.590

-rtems_event_receive: not available -- NO_WAIT______________________0.551

-rtems_event_receive: not available -- caller blocks________________3.545

-

-Signal Manager

-

-rtems_signal_catch_________________________________________________0.944

-rtems_signal_send: returns to caller_______________________________3.186

-rtems_signal_send: signal to self__________________________________5.959

-exit ASR overhead: returns to calling task_________________________2.950

-exit ASR overhead: returns to preempting task______________________1.180

-

-Partition Manager

-

-rtems_partition_create____________________________________________17.464

-rtems_partition_ident______________________________________________4.810

-rtems_partition_delete_____________________________________________1.475

-rtems_partition_get_buffer: available______________________________3.304

-rtems_partition_get_buffer: not available__________________________0.472

-rtems_partition_return_buffer______________________________________1.947

-

-Region Manager

-

-rtems_region_create________________________________________________4.425

-rtems_region_ident_________________________________________________4.917

-rtems_region_delete________________________________________________1.829

-rtems_region_get_segment: available________________________________1.121

-rtems_region_get_segment: not available -- NO_WAIT_________________1.770

-rtems_region_get_segment: not available -- caller blocks___________6.667

-rtems_region_return_segment: no waiting tasks______________________0.944

-rtems_region_return_segment: task readied -- returns to caller_____1.298

-rtems_region_return_segment: task readied -- preempts caller_______9.322

- 

-Dual-Ported Memory Manager

-

-rtems_port_create__________________________________________________6.372

-rtems_port_ident___________________________________________________4.803

-rtems_port_delete__________________________________________________3.245

-rtems_port_internal_to_external____________________________________0.490

-rtems_port_external_to_internal____________________________________0.502

-

-IO Manager

-

-rtems_io_initialize________________________________________________0.090

-rtems_io_open______________________________________________________0.075

-rtems_io_close_____________________________________________________0.086

-rtems_io_read______________________________________________________0.069

-rtems_io_write_____________________________________________________0.082

-rtems_io_control___________________________________________________0.081

-

-Rate Monotonic Manager

-

-rtems_rate_monotonic_create________________________________________7.080

-rtems_rate_monotonic_ident_________________________________________4.814

-rtems_rate_monotonic_cancel________________________________________5.369

-rtems_rate_monotonic_delete: active________________________________1.121

-rtems_rate_monotonic_delete: inactive______________________________4.248

-rtems_rate_monotonic_period: obtain status_________________________2.419

-rtems_rate_monotonic_period: initiate period -- returns to caller__9.204

-rtems_rate_monotonic_period: conclude periods -- caller blocks_____2.131

-

-

-

diff --git a/c/src/lib/libbsp/powerpc/mcp750/times.mvme2307 b/c/src/lib/libbsp/powerpc/mcp750/times.mvme2307
deleted file mode 100644
index 1bf3fbe064..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/times.mvme2307
+++ /dev/null
@@ -1,205 +0,0 @@
-#
-#  Timing Test Suite Results for this BSP on the MVME2307
-#
-#  $Id$
-#
-
-Thanks to Jay Kulpinski (jskulpin@eng01.gdds.com) for providing these
-times.
-
-Board:  Motorola MVME2307
-CPU: MPC604
-Clock Speed: 300MHz
-Memory Configuration: 64MB, ECC Enabled (ECC-Memory Detected)
-L2Cache:       NONE
-Wait States:
-
-Times Reported in: microseconds
-Timer Source: on-CPU cycle counter
-
-Column X:
-Column Y:
-
-#                          DESCRIPTION                                    A
-== =================================================================  =========
- 1 rtems_semaphore_create                                             16.493
-   rtems_semaphore_delete                                             16.673
-   rtems_semaphore_obtain: available                                  10.381
-   rtems_semaphore_obtain: not available -- NO_WAIT                   10.383
-   rtems_semaphore_release: no waiting tasks                          12.071
-
- 2 rtems_semaphore_obtain: not available -- caller blocks             31.929
-
- 3 rtems_semaphore_release: task readied -- preempts caller           26.442
-
- 4 rtems_task_restart: blocked task -- preempts caller                46.073
-   rtems_task_restart: ready task -- preempts caller                  41.153
-   rtems_semaphore_release: task readied -- returns to caller         16.709
-   rtems_task_create                                                  50.860
-   rtems_task_start                                                   20.581
-   rtems_task_restart: suspended task -- returns to caller            23.807
-   rtems_task_delete: suspended task                                  39.714
-   rtems_task_restart: ready task -- returns to caller                24.737
-   rtems_task_restart: blocked task -- returns to caller              28.471
-   rtems_task_delete: blocked task                                    41.008
-
- 5 rtems_task_suspend: calling task                                   25.204
-   rtems_task_resume: task readied -- preempts caller                 22.296
-
- 6 rtems_task_restart: calling task                                   30.990
-   rtems_task_suspend: returns to caller                              11.582
-   rtems_task_resume: task readied -- returns to caller               12.620
-   rtems_task_delete: ready task                                      40.913
-
- 7 rtems_task_restart: suspended task -- preempts caller              38.087
-
- 8 rtems_task_set_priority: obtain current priority                    9.727
-   rtems_task_set_priority: returns to caller                         17.030
-   rtems_task_mode: obtain current mode                                3.768
-   rtems_task_mode: no reschedule                                      3.766
-   rtems_task_mode: reschedule -- returns to caller                    5.933
-   rtems_task_mode: reschedule -- preempts caller                     22.613
-   rtems_task_set_note                                                10.115
-   rtems_task_get_note                                                10.236
-   rtems_clock_set                                                    21.466
-   rtems_clock_get                                                     2.286
-
- 9 rtems_message_queue_create                                         40.373
-   rtems_message_queue_send: no waiting tasks                         20.370
-   rtems_message_queue_urgent: no waiting tasks                       20.397
-   rtems_message_queue_receive: available                             17.799
-   rtems_message_queue_flush: no messages flushed                      9.405
-   rtems_message_queue_flush: messages flushed                        10.945
-   rtems_message_queue_delete                                         19.673
-
-10 rtems_message_queue_receive: not available -- NO_WAIT              11.778
-   rtems_message_queue_receive: not available -- caller blocks        32.770
-
-11 rtems_message_queue_send: task readied -- preempts caller          33.719
-
-12 rtems_message_queue_send: task readied -- returns to caller        23.653
-
-13 rtems_message_queue_urgent: task readied -- preempts caller        33.713
-
-14 rtems_message_queue_urgent: task readied -- returns to caller      23.651
-
-15 rtems_event_receive: obtain current events                          1.275
-   rtems_event_receive: not available -- NO_WAIT                       9.193
-   rtems_event_receive: not available -- caller blocks                27.196
-   rtems_event_send: no task readied                                   9.437
-   rtems_event_receive: available                                      9.653
-   rtems_event_send: task readied -- returns to caller                15.845
-
-16 rtems_event_send: task readied -- preempts caller                  26.008
-
-17 rtems_task_set_priority: preempts caller                           30.872
-
-18 rtems_task_delete: calling task                                    53.748
-
-19 rtems_signal_catch                                                  7.253
-   rtems_signal_send: returns to caller                               11.993
-   rtems_signal_send: signal to self                                  17.633
-   exit ASR overhead: returns to calling task                         14.933
-   exit ASR overhead: returns to preempting task                      18.413
-
-20 rtems_partition_create                                             18.473
-   rtems_region_create                                                14.573
-   rtems_partition_get_buffer: available                              11.153
-   rtems_partition_get_buffer: not available                           9.593
-   rtems_partition_return_buffer                                      12.233
-   rtems_partition_delete                                             11.633
-   rtems_region_get_segment: available                                12.533
-   rtems_region_get_segment: not available -- NO_WAIT                 11.633
-   rtems_region_return_segment: no waiting tasks                      13.613
-   rtems_region_get_segment: not available -- caller blocks           37.673
-   rtems_region_return_segment: task readied -- preempts caller       36.233
-   rtems_region_return_segment: task readied -- returns to caller     23.153
-   rtems_region_delete                                                12.353
-   rtems_io_initialize                                                 1.255
-   rtems_io_open                                                       1.096
-   rtems_io_close                                                      1.095
-   rtems_io_read                                                       1.097
-   rtems_io_write                                                      1.096
-   rtems_io_control                                                    1.097
-
-21 rtems_task_ident                                                   47.737
-   rtems_message_queue_ident                                          46.548
-   rtems_semaphore_ident                                              53.196
-   rtems_partition_ident                                              46.545
-   rtems_region_ident                                                 47.380
-   rtems_port_ident                                                   46.540
-   rtems_timer_ident                                                  46.548
-   rtems_rate_monotonic_ident                                         46.545
-
-22 rtems_message_queue_broadcast: task readied -- returns to caller   31.193
-   rtems_message_queue_broadcast: no waiting tasks                    13.872
-   rtems_message_queue_broadcast: task readied -- preempts caller     37.853
-
-23 rtems_timer_create                                                  9.353
-   rtems_timer_fire_after: inactive                                   14.732
-   rtems_timer_fire_after: active                                     15.913
-   rtems_timer_cancel: active                                          9.855
-   rtems_timer_cancel: inactive                                        8.692
-   rtems_timer_reset: inactive                                        13.533
-   rtems_timer_reset: active                                          14.703
-   rtems_timer_fire_when: inactive                                    19.015
-   rtems_timer_fire_when: active                                      18.997
-   rtems_timer_delete: active                                         12.040
-   rtems_timer_delete: inactive                                       10.825
-   rtems_task_wake_when                                               32.645
-
-24 rtems_task_wake_after: yield -- returns to caller                   6.760
-   rtems_task_wake_after: yields -- preempts caller                   22.005
-
-25 rtems_clock_tick                                                    6.533
-
-26 _ISR_Disable                                                        0.353
-   _ISR_Flash                                                          0.053
-   _ISR_Enable                                                         0.000
-   _Thread_Disable_dispatch                                            0.353
-   _Thread_Enable_dispatch                                             5.513
-   _Thread_Set_state                                                   5.513
-   _Thread_Disptach (NO FP)                                           19.073
-   context switch: no floating point contexts                         16.253
-   context switch: self                                                6.953
-   context switch: to another task                                     7.013
-   context switch: restore 1st FP task                                22.673
-   fp context switch: save idle, restore idle                         25.733
-   fp context switch: save idle, restore initialized                  16.253
-   fp context switch: save initialized, restore initialized           16.673
-   _Thread_Resume                                                      6.833
-   _Thread_Unblock                                                     4.733
-   _Thread_Ready                                                       4.793
-   _Thread_Get                                                         2.273
-   _Semaphore_Get                                                      2.073
-   _Thread_Get: invalid id                                             0.274
-
-27 interrupt entry overhead: returns to interrupted task               7.013
-   interrupt exit overhead: returns to interrupted task                8.393
-   interrupt entry overhead: returns to nested interrupt               4.733
-   interrupt exit overhead: returns to nested interrupt                7.073
-   interrupt entry overhead: returns to preempting task                5.093
-   interrupt exit overhead: returns to preempting task                23.513
-
-28 rtems_port_create                                                  12.473
-   rtems_port_external_to_internal                                     9.130
-   rtems_port_internal_to_external                                     9.130
-   rtems_port_delete                                                  11.873
-
-29 rtems_rate_monotonic_create                                        11.813
-   rtems_rate_monotonic_period: initiate period -- returns to caller  17.753
-   rtems_rate_monotonic_period: obtain status                          9.533
-   rtems_rate_monotonic_cancel                                        13.313
-   rtems_rate_monotonic_delete: inactive                              12.473
-   rtems_rate_monotonic_delete: active                                13.193
-   rtems_rate_monotonic_period: conclude periods -- caller blocks     23.236
-@
-
-
-1.1
-log
-@Motorola MVME2307 BSP submitted by Jay Kulpinski <jskulpin@@eng01.gdds.com>.
-No modifications made.
-@
-text
-
diff --git a/c/src/lib/libbsp/powerpc/mcp750/vectors/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/vectors/Makefile.in
deleted file mode 100644
index 33e1b3cefa..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/vectors/Makefile.in
+++ /dev/null
@@ -1,75 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/vectors
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../shared/vectors
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = vectors_init
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES = $(srcdir)/../../shared/vectors/vectors.h
-
-# Assembly source names, if any, go here -- minus the .s
-S_PIECES = vectors
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(S_O_FILES) $(C_O_FILES) $(CC_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE)/bsp
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-preinstall: 
-	@$(mkinstalldirs) $(PROJECT_INCLUDE)/bsp
-	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)/bsp
-
-all: ${ARCH} $(SRCS) preinstall $(OBJS) $(PGM)
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in
deleted file mode 100644
index 294ba38a89..0000000000
--- a/c/src/lib/libbsp/powerpc/mcp750/wrapup/Makefile.in
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mcp750/wrapup
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-BSP_PIECES = clock console irq openpic pci residual startup vectors motorola
-GENERIC_PIECES =
-
-# bummer; have to use $foreach since % pattern subst rules only replace 1x
-OBJS = $(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/*.o) \
-    $(foreach piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/*.o)
-LIB = $(ARCH)/libbsp.a
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/lib.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(LIB): ${OBJS}
-	$(make-library)
-
-all: ${ARCH} $(SRCS) $(LIB)
-	$(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status