Remove stray white spaces.

36 files changed, 209 insertions, 209 deletions

diff --git a/c/src/lib/libbsp/sh/gensh1/include/bsp.h b/c/src/lib/libbsp/sh/gensh1/include/bsp.h
index a822da19a5..95c522ac0c 100644
--- a/c/src/lib/libbsp/sh/gensh1/include/bsp.h
+++ b/c/src/lib/libbsp/sh/gensh1/include/bsp.h
@@ -10,7 +10,7 @@
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * 
+ *
  *
  *  COPYRIGHT (c) 1998.
  *  On-Line Applications Research Corporation (OAR).
@@ -106,7 +106,7 @@ extern uint32_t         WorkSpaceEnd ;
 extern void *CPU_Interrupt_stack_low ;
 extern void *CPU_Interrupt_stack_high ;
 
-  
+
 /* miscellaneous stuff assumed to exist */
 
 extern rtems_configuration_table BSP_Configuration;
@@ -125,7 +125,7 @@ extern void bsp_cleanup( void );
   BSP_CONSOLE_DRIVER_TABLE_ENTRY, \
   { console_initialize, console_open, console_close, \
       console_read, console_write, console_control }
- 
+
 /*
  * NOTE: Use the standard Clock driver entry
  */
diff --git a/c/src/lib/libbsp/sh/gensh1/include/coverhd.h b/c/src/lib/libbsp/sh/gensh1/include/coverhd.h
index ad34897008..ab7c3dad53 100644
--- a/c/src/lib/libbsp/sh/gensh1/include/coverhd.h
+++ b/c/src/lib/libbsp/sh/gensh1/include/coverhd.h
@@ -15,7 +15,7 @@
  *         all calling overhead including passing of arguments.
  *
  *
- * These are the figures tmoverhd.exe reported with egcs-980205 -O3 
+ * These are the figures tmoverhd.exe reported with egcs-980205 -O3
  * on a Diesner OktagonSH/Amos-2.1 board with SH7032/20MHz
  *
  * These results are assumed to be applicable to most SH7032/20MHz boards
@@ -27,7 +27,7 @@
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * 
+ *
  *
  *  COPYRIGHT (c) 1998.
  *  On-Line Applications Research Corporation (OAR).
diff --git a/c/src/lib/libbsp/sh/gensh1/start/start.S b/c/src/lib/libbsp/sh/gensh1/start/start.S
index 8d6aba06f0..1225e62010 100644
--- a/c/src/lib/libbsp/sh/gensh1/start/start.S
+++ b/c/src/lib/libbsp/sh/gensh1/start/start.S
@@ -53,7 +53,7 @@ SYM (start):
 	mov.l   vects_k,r0   	! update vbr to point to vectab
 	ldc     r0,vbr
 
-	! call the mainline	
+	! call the mainline
 	mov #0,r4		! argc
 	mov.l main_k,r0
 	jsr @r0
@@ -69,7 +69,7 @@ SYM (start):
 
 	.align 2
 stack_k:
-	.long	SYM(stack)	
+	.long	SYM(stack)
 edata_k:
 	.long	SYM(edata)
 end_k:
diff --git a/c/src/lib/libbsp/sh/gensh1/startup/bspclean.c b/c/src/lib/libbsp/sh/gensh1/startup/bspclean.c
index 4d8fe9bf3e..59f0977919 100644
--- a/c/src/lib/libbsp/sh/gensh1/startup/bspclean.c
+++ b/c/src/lib/libbsp/sh/gensh1/startup/bspclean.c
@@ -17,9 +17,9 @@
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  *
  *  You should have received a copy of the GNU General Public License
- *  along with this program; If not, write to the Free Software Foundation, 
- *  675 Mass Ave, Cambridge, MA 02139, USA. 
- * 
+ *  along with this program; If not, write to the Free Software Foundation,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
  *
  *  COPYRIGHT (c) 1998.
  *  On-Line Applications Research Corporation (OAR).
diff --git a/c/src/lib/libbsp/sh/gensh1/startup/bspstart.c b/c/src/lib/libbsp/sh/gensh1/startup/bspstart.c
index 52486e2383..feb935c998 100644
--- a/c/src/lib/libbsp/sh/gensh1/startup/bspstart.c
+++ b/c/src/lib/libbsp/sh/gensh1/startup/bspstart.c
@@ -29,7 +29,7 @@
 #include <bsp.h>
 #include <rtems/libio.h>
 #include <rtems/libcsupport.h>
- 
+
 /*
  *  The original table from the application and our copy of it with
  *  some changes.
@@ -46,7 +46,7 @@ char *rtems_progname;
 /*
  *  Use the shared implementations of the following routines
  */
- 
+
 void bsp_postdriver_hook(void);
 void bsp_libc_init( void *, uint32_t, int );
 
@@ -62,11 +62,11 @@ void bsp_libc_init( void *, uint32_t, int );
  *      not yet initialized.
  *
  */
- 
+
 void bsp_pretasking_hook(void)
 {
     bsp_libc_init(&HeapStart, (char *)&HeapEnd - (char *)&HeapStart, 0);
- 
+
 #ifdef RTEMS_DEBUG
     rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
 #endif
@@ -81,13 +81,13 @@ void bsp_pretasking_hook(void)
 void bsp_start(void)
 {
   /*
-     For real boards you need to setup the hardware 
+     For real boards you need to setup the hardware
      and need to copy the vector table from rom to ram.
 
-     Depending on the board this can either be done from inside the rom 
+     Depending on the board this can either be done from inside the rom
      startup code, rtems startup code or here.
    */
-   
+
   /*
    *  Allocate the memory for the RTEMS Work Space.  This can come from
    *  a variety of places: hard coded address, malloc'ed from outside
@@ -103,10 +103,10 @@ void bsp_start(void)
    */
 
   BSP_Configuration.work_space_start = (void *) &WorkSpaceStart ;
-  BSP_Configuration.work_space_size  = 
-    (uint32_t) &WorkSpaceEnd - 
+  BSP_Configuration.work_space_size  =
+    (uint32_t) &WorkSpaceEnd -
     (uint32_t) &WorkSpaceStart ;
-  
+
   /*
    *  initialize the CPU table for this BSP
    */
@@ -115,7 +115,7 @@ void bsp_start(void)
   _CPU_Interrupt_stack_low = &CPU_Interrupt_stack_low ;
   _CPU_Interrupt_stack_high = &CPU_Interrupt_stack_high ;
 
-  Cpu_table.interrupt_stack_size = 
+  Cpu_table.interrupt_stack_size =
     (uint32_t) (&CPU_Interrupt_stack_high) -
     (uint32_t) (&CPU_Interrupt_stack_low) ;
 #endif
@@ -123,7 +123,7 @@ void bsp_start(void)
 
   Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
   Cpu_table.postdriver_hook = bsp_postdriver_hook;
-  
+
 #if ( CPU_ALLOCATE_INTERRUPT_STACK == TRUE )
   Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;
 #endif
diff --git a/c/src/lib/libbsp/sh/gensh2/console/config.c b/c/src/lib/libbsp/sh/gensh2/console/config.c
index e277765650..dfd1a46a80 100644
--- a/c/src/lib/libbsp/sh/gensh2/console/config.c
+++ b/c/src/lib/libbsp/sh/gensh2/console/config.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * This file contains the TTY driver table. The implementation is
  * based on libchip/serial drivers, but it uses internal SHx SCI so
  * the implementation of the driver is placed in
@@ -25,7 +25,7 @@
 #include <rtems/termiostypes.h>
 
 
-/* 
+/*
  * Function set for interrupt enabled termios console
  */
 console_fns sh_sci_fns =
@@ -41,7 +41,7 @@ console_fns sh_sci_fns =
     TERMIOS_IRQ_DRIVEN           /* deviceOutputUsesInterrupts */
 };
 
-/* 
+/*
  * Function set for polled termios console
  */
 console_fns sh_sci_fns_polled =
@@ -81,7 +81,7 @@ static const struct termios term2 = {
     0,
     { 0 }
 };
-    
+
 
 console_tbl	Console_Port_Tbl[] = {
     {
diff --git a/c/src/lib/libbsp/sh/gensh2/include/bsp.h b/c/src/lib/libbsp/sh/gensh2/include/bsp.h
index 94240b03e1..a52beb5a85 100644
--- a/c/src/lib/libbsp/sh/gensh2/include/bsp.h
+++ b/c/src/lib/libbsp/sh/gensh2/include/bsp.h
@@ -10,7 +10,7 @@
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * 
+ *
  *
  *  COPYRIGHT (c) 1998.
  *  On-Line Applications Research Corporation (OAR).
@@ -123,7 +123,7 @@ extern uint32_t         WorkSpaceEnd ;
 extern void *CPU_Interrupt_stack_low ;
 extern void *CPU_Interrupt_stack_high ;
 
-  
+
 /* miscellaneous stuff assumed to exist */
 
 extern rtems_configuration_table BSP_Configuration;
diff --git a/c/src/lib/libbsp/sh/gensh2/include/coverhd.h b/c/src/lib/libbsp/sh/gensh2/include/coverhd.h
index 141fdc12e2..1fb5d04aac 100644
--- a/c/src/lib/libbsp/sh/gensh2/include/coverhd.h
+++ b/c/src/lib/libbsp/sh/gensh2/include/coverhd.h
@@ -15,7 +15,7 @@
  *         all calling overhead including passing of arguments.
  *
  *
- * These are the figures tmoverhd.exe reported with gcc-2.95.1 -O4 
+ * These are the figures tmoverhd.exe reported with gcc-2.95.1 -O4
  * on a Hitachi SH7045F Evaluation Board with SH7045F at 29 MHz
  *
  * These results are assumed to be applicable to most SH7045/29MHz boards
@@ -27,7 +27,7 @@
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * 
+ *
  *  The license and distribution terms for this file may be
  *  found in the file LICENSE in this distribution or at
  *  http://www.rtems.com/license/LICENSE.
diff --git a/c/src/lib/libbsp/sh/gensh2/start/start.S b/c/src/lib/libbsp/sh/gensh2/start/start.S
index 3dde5912ef..8a78d40b05 100644
--- a/c/src/lib/libbsp/sh/gensh2/start/start.S
+++ b/c/src/lib/libbsp/sh/gensh2/start/start.S
@@ -13,7 +13,7 @@
  *  TGA Technologies, Inc.
  *  100 Pinnacle Way, Suite 140
  *  Norcross, GA 30071 U.S.A.
- *  
+ *
  *
  *  This modified file may be copied and distributed in accordance
  *  the above-referenced license. It is provided for critique and
@@ -75,7 +75,7 @@ SYM (start):
 	mova	vects_k,r0
 	mov.l	@r0, r1	! Shadow vect tbl addr
 	stc		vbr, r2	! Original vect tbl addr
-	and		#0, r0 
+	and		#0, r0
 	mov		r0, r4	! 0 in r4 and r0
 
 !trapa #32
@@ -135,7 +135,7 @@ SYM (start):
 	ldc     r0,vbr
 #endif /* ! STANDALONE_EVB */
 
-	! call the mainline	
+	! call the mainline
 	mov #0,r4		! argc
 	mov.l main_k,r0
 	jsr @r0
@@ -157,7 +157,7 @@ SYM (start):
 
 	.align 2
 stack_k:
-	.long	SYM(stack)	
+	.long	SYM(stack)
 edata_k:
 	.long	SYM(edata)
 end_k:
diff --git a/c/src/lib/libbsp/sh/gensh2/startup/bspclean.c b/c/src/lib/libbsp/sh/gensh2/startup/bspclean.c
index a48d735823..7fb98bdd56 100644
--- a/c/src/lib/libbsp/sh/gensh2/startup/bspclean.c
+++ b/c/src/lib/libbsp/sh/gensh2/startup/bspclean.c
@@ -17,9 +17,9 @@
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  *
  *  You should have received a copy of the GNU General Public License
- *  along with this program; If not, write to the Free Software Foundation, 
- *  675 Mass Ave, Cambridge, MA 02139, USA. 
- * 
+ *  along with this program; If not, write to the Free Software Foundation,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
  *
  *  COPYRIGHT (c) 1998.
  *  On-Line Applications Research Corporation (OAR).
diff --git a/c/src/lib/libbsp/sh/gensh2/startup/bspstart.c b/c/src/lib/libbsp/sh/gensh2/startup/bspstart.c
index 3bddc4fd8a..0b85e5081a 100644
--- a/c/src/lib/libbsp/sh/gensh2/startup/bspstart.c
+++ b/c/src/lib/libbsp/sh/gensh2/startup/bspstart.c
@@ -29,7 +29,7 @@
 #include <bsp.h>
 #include <rtems/libio.h>
 #include <rtems/libcsupport.h>
- 
+
 /*
  *  The original table from the application and our copy of it with
  *  some changes.
@@ -48,7 +48,7 @@ char *rtems_progname;
 /*
  *  Use the shared implementations of the following routines
  */
- 
+
 void bsp_postdriver_hook(void);
 void bsp_libc_init( void *, uint32_t, int );
 
@@ -64,11 +64,11 @@ void bsp_libc_init( void *, uint32_t, int );
  *      not yet initialized.
  *
  */
- 
+
 void bsp_pretasking_hook(void)
 {
     bsp_libc_init(&HeapStart, (char *)&HeapEnd - (char *)&HeapStart, 0);
- 
+
 #ifdef RTEMS_DEBUG
     rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
 #endif
@@ -83,10 +83,10 @@ void bsp_pretasking_hook(void)
 void bsp_start(void)
 {
   /*
-     For real boards you need to setup the hardware 
+     For real boards you need to setup the hardware
      and need to copy the vector table from rom to ram.
 
-     Depending on the board this can ether be done from inside the rom 
+     Depending on the board this can ether be done from inside the rom
      startup code, rtems startup code or here.
    */
 
@@ -110,9 +110,9 @@ void bsp_start(void)
    */
 
   BSP_Configuration.work_space_start = (void *) &WorkSpaceStart ;
-  BSP_Configuration.work_space_size  = 
+  BSP_Configuration.work_space_size  =
     &WorkSpaceEnd - &WorkSpaceStart ;
-  
+
   /*
    *  initialize the CPU table for this BSP
    */
@@ -122,7 +122,7 @@ void bsp_start(void)
   _CPU_Interrupt_stack_high = &CPU_Interrupt_stack_high ;
 
   /* This isn't used anywhere */
-  Cpu_table.interrupt_stack_size = 
+  Cpu_table.interrupt_stack_size =
     &CPU_Interrupt_stack_high - &CPU_Interrupt_stack_low ;
 #endif
 
diff --git a/c/src/lib/libbsp/sh/gensh2/startup/hw_init.c b/c/src/lib/libbsp/sh/gensh2/startup/hw_init.c
index 4f0b0f0097..c0f1d70ab4 100644
--- a/c/src/lib/libbsp/sh/gensh2/startup/hw_init.c
+++ b/c/src/lib/libbsp/sh/gensh2/startup/hw_init.c
@@ -27,7 +27,7 @@
  *  TGA Technologies, Inc.
  *  100 Pinnacle Way, Suite 140
  *  Norcross, GA 30071 U.S.A.
- *  
+ *
  *
  *  This file may be copied and distributed in accordance
  *  the above-referenced license. It is provided for critique and
@@ -74,7 +74,7 @@ void early_hw_init (void)
 };
 
 /*  to be called from 'bspstart.c' */
-void bsp_hw_init (void) 
+void bsp_hw_init (void)
 {
   uint16_t   temp16;
 
@@ -83,7 +83,7 @@ void bsp_hw_init (void)
   /* no STANDALONE_EVB: accepts defaults, adds RESET */
 
   /* FIXME: replace 'magic numbers' */
-	
+
   write16(0x5000, PFC_PACRH);  /* Pin function controller - WRHH, WRHL */
   write16(0x1550, PFC_PACRL1); /* Pin fun. controller - WRH,WRL,RD,CS1 */
   write16(0x0000, PFC_PBCR1);  /* Pin function controller - default */
diff --git a/c/src/lib/libbsp/sh/gensh4/console/console.c b/c/src/lib/libbsp/sh/gensh4/console/console.c
index 1c85036672..358f632e77 100644
--- a/c/src/lib/libbsp/sh/gensh4/console/console.c
+++ b/c/src/lib/libbsp/sh/gensh4/console/console.c
@@ -159,10 +159,10 @@ console_first_open(int major, int minor, void *arg)
             args->iop->data1,       /* tty */
             minor+1,                /* channel */
             (console_mode == CONSOLE_MODE_INT));
-    
+
     if (sc == RTEMS_SUCCESSFUL)
         sc = sh4uart_reset(&sh4_uarts[minor]);
-    
+
     return sc;
 }
 
@@ -182,7 +182,7 @@ console_last_close(int major, int minor, void *arg)
 {
     if (console_mode != CONSOLE_MODE_IPL)
     /* working from gdb we should not disable port operations */
-        return sh4uart_disable(&sh4_uarts[minor], 
+        return sh4uart_disable(&sh4_uarts[minor],
 	        !(boot_mode == SH4_BOOT_MODE_IPL));
     else
 	return RTEMS_SUCCESSFUL;
@@ -200,7 +200,7 @@ console_last_close(int major, int minor, void *arg)
 void
 console_reserve_resources(rtems_configuration_table *configuration)
 {
-    if ((console_mode != CONSOLE_MODE_RAW) && 
+    if ((console_mode != CONSOLE_MODE_RAW) &&
             (console_mode != CONSOLE_MODE_IPL))
         rtems_termios_reserve_resources (configuration, 2);
 }
@@ -240,7 +240,7 @@ console_initialize(rtems_device_major_number major,
     if ((console_mode != CONSOLE_MODE_RAW) &&
                     (console_mode != CONSOLE_MODE_IPL))
         rtems_termios_initialize ();
-    
+
     /*
      * Register the devices
      */
@@ -272,7 +272,7 @@ console_initialize(rtems_device_major_number major,
             sc = sh4uart_reset(&sh4_uarts[1]);
 
         return sc;
-    }                        
+    }
 
     return RTEMS_SUCCESSFUL;
 }
@@ -355,7 +355,7 @@ console_close(rtems_device_major_number major,
         return rtems_termios_close (arg);
     else
         return RTEMS_SUCCESSFUL;
-}    
+}
 
 /* console_read --
  *     Read from the console device
@@ -432,7 +432,7 @@ console_write(rtems_device_major_number major,
             char *buf = argp->buffer;
             int count = argp->count;
             int i;
-            
+
             for (i = 0; i < count; i++)
             {
                 if (*buf == '\n')
diff --git a/c/src/lib/libbsp/sh/gensh4/hw_init/hw_init.c b/c/src/lib/libbsp/sh/gensh4/hw_init/hw_init.c
index befd2c1dfd..2e7d738ad4 100644
--- a/c/src/lib/libbsp/sh/gensh4/hw_init/hw_init.c
+++ b/c/src/lib/libbsp/sh/gensh4/hw_init/hw_init.c
@@ -39,12 +39,12 @@ early_hw_init(void)
 {
     /* Explicitly turn off the MMU */
     write32(0, SH7750_MMUCR);
-    
+
     /* Disable instruction and operand caches */
     write32(0, SH7750_CCR);
-    
+
     /* Setup Clock Generator */
-    /* 
+    /*
      * Input clock frequency is 16 MHz, MD0=1,
      * CPU clock frequency already selected to 96MHz.
      * Bus clock frequency should be set to 48 MHz, therefore divider 2
@@ -57,7 +57,7 @@ early_hw_init(void)
             SH7750_WTCSR_KEY, SH7750_WTCSR);
     write16(SH7750_WTCSR_MODE_IT | SH7750_WTCSR_CKS_DIV4096 |
             SH7750_WTCSR_KEY, SH7750_WTCSR);
-    
+
     /* Turn PLL1 on */
     write16(0x40 | SH7750_WTCNT_KEY, SH7750_WTCNT);
     write16(read16(SH7750_FRQCR) | SH7750_FRQCR_PLL1EN, SH7750_FRQCR);
@@ -71,7 +71,7 @@ early_hw_init(void)
     /* Turn PLL2 on */
     write16(0x40 | SH7750_WTCNT_KEY, SH7750_WTCNT);
     write16(read16(SH7750_FRQCR) | SH7750_FRQCR_PLL2EN, SH7750_FRQCR);
-    
+
     /* Bus State Controller Initialization */
     /*
      * Area assignments:
@@ -93,7 +93,7 @@ early_hw_init(void)
         SH7750_BCR1_DRAMTP_2SDRAM_3SDRAM  /* Select Area 2 SDRAM type */
         /* Area 5,6 programmed as a SRAM interface (not PCMCIA) */,
         SH7750_BCR1);
-    
+
     write16(
         (SH7750_BCR2_SZ_8 << SH7750_BCR2_A0SZ_S) |  /* These bits is read-only
                                                        and set during reset */
@@ -105,7 +105,7 @@ early_hw_init(void)
         (SH7750_BCR2_SZ_32 << SH7750_BCR2_A1SZ_S) | /* GDC is 32-bit width */
         SH7750_BCR2_PORTEN,                         /* Use D32-D51 as a port */
         SH7750_BCR2);
-    
+
     write32(
         (0 << SH7750_WCR1_DMAIW_S) |  /* 0 required for SDRAM RAS down mode */
         (7 << SH7750_WCR1_A6IW_S) |   /* Area 6 not used */
@@ -125,9 +125,9 @@ early_hw_init(void)
         (SH7750_WCR2_WS15   << SH7750_WCR2_A4W_S) | /* Area 4 not used */
         (SH7750_WCR2_WS15   << SH7750_WCR2_A3W_S) | /*Area 3 not used*/
         (SH7750_WCR2_SDRAM_CAS_LAT2 << SH7750_WCR2_A2W_S) | /* SDRAM CL = 2 */
-        (SH7750_WCR2_WS15   << SH7750_WCR2_A1W_S) | /* Area 1 (GDC) 
+        (SH7750_WCR2_WS15   << SH7750_WCR2_A1W_S) | /* Area 1 (GDC)
                                                        requirements not known*/
-        (SH7750_WCR2_WS6    << SH7750_WCR2_A0W_S) | /* 4 wait states required 
+        (SH7750_WCR2_WS6    << SH7750_WCR2_A0W_S) | /* 4 wait states required
                                                        at 48MHz for 70ns mem.,
                                                        set closest greater */
         (SH7750_WCR2_BPWS7  << SH7750_WCR2_A0B_S),  /* burst mode disabled for
@@ -171,21 +171,21 @@ early_hw_init(void)
 
     /* Clear refresh timer counter */
     write16(SH7750_RTCNT_KEY | 0, SH7750_RTCNT);
-    
+
     /* Time between auto-refresh commands is 15.6 microseconds; refresh
        timer counter frequency is 12 MHz; 1.56e-5*1.2e7= 187.2, therefore
        program the refresh timer divider to 187 */
-    write16(SH7750_RTCOR_KEY | 187, SH7750_RTCOR); 
-    
+    write16(SH7750_RTCOR_KEY | 187, SH7750_RTCOR);
+
     /* Clear refresh counter */
     write16(SH7750_RFCR_KEY | 0, SH7750_RFCR);
-    
+
     /* Select refresh counter base frequency as bus frequency/4 = 12 MHz */
     write16(SH7750_RTCSR_CKS_CKIO_DIV4 | SH7750_RTCSR_KEY, SH7750_RTCSR);
 
     /* Initialize Memory Control Register; disable refresh */
     write32((MCRDEF & ~SH7750_MCR_RFSH) | SH7750_MCR_PALL, SH7750_MCR);
-    
+
     /* SDRAM power-up initialization require 100 microseconds delay after
        stable power and clock fed; 100 microseconds corresponds to 7 refresh
        intervals */
@@ -193,10 +193,10 @@ early_hw_init(void)
 
     /* Clear refresh timer counter */
     write16(SH7750_RTCNT_KEY | 0, SH7750_RTCNT);
-    
+
     /* Clear refresh counter */
     write16(SH7750_RFCR_KEY | 0, SH7750_RFCR);
-    
+
     /* Execute Precharge All command */
     write32(0, SH7750_SDRAM_MODE_A2_32BIT(0));
 
@@ -210,27 +210,27 @@ early_hw_init(void)
     /* SDRAM data width is 32 bit (4 bytes), cache line size is 32 bytes,
        therefore burst length is 8 (32 / 4) */
     write8(0,SH7750_SDRAM_MODE_A2_32BIT(
-        SDRAM_MODE_BL_8 | 
-        SDRAM_MODE_BT_SEQ |    /* Only sequential burst mode supported 
+        SDRAM_MODE_BL_8 |
+        SDRAM_MODE_BT_SEQ |    /* Only sequential burst mode supported
                                   in SH7750 */
         SDRAM_MODE_CL_2 |      /* CAS latency is 2 */
         SDRAM_MODE_OPC_BRBW)   /* Burst read/burst write */
     );
     /* Bus State Controller initialized now */
-    
+
     /* Disable DMA controller */
     write32(0, SH7750_DMAOR);
-    
+
     /* I/O port setup */
     /* Configure all port bits as output - to fasciliate debugging */
     write32(
-        SH7750_PCTRA_PBOUT(0)  | SH7750_PCTRA_PBOUT(1) | 
+        SH7750_PCTRA_PBOUT(0)  | SH7750_PCTRA_PBOUT(1) |
         SH7750_PCTRA_PBOUT(2)  | SH7750_PCTRA_PBOUT(3) |
-        SH7750_PCTRA_PBOUT(4)  | SH7750_PCTRA_PBOUT(5) | 
+        SH7750_PCTRA_PBOUT(4)  | SH7750_PCTRA_PBOUT(5) |
         SH7750_PCTRA_PBOUT(6)  | SH7750_PCTRA_PBOUT(7) |
-        SH7750_PCTRA_PBOUT(8)  | SH7750_PCTRA_PBOUT(9) | 
+        SH7750_PCTRA_PBOUT(8)  | SH7750_PCTRA_PBOUT(9) |
         SH7750_PCTRA_PBOUT(10) | SH7750_PCTRA_PBOUT(11) |
-        SH7750_PCTRA_PBOUT(12) | SH7750_PCTRA_PBOUT(13) | 
+        SH7750_PCTRA_PBOUT(12) | SH7750_PCTRA_PBOUT(13) |
         SH7750_PCTRA_PBOUT(14) | SH7750_PCTRA_PBOUT(15),
         SH7750_PCTRA);
     write32(
@@ -240,7 +240,7 @@ early_hw_init(void)
     /* Clear data in port */
     write32(0, SH7750_PDTRA);
     write32(0, SH7750_PDTRB);
-    
+
     /* Interrupt Controller Initialization */
     write16(SH7750_ICR_IRLM, SH7750_ICR); /* IRLs serves as an independent
                                              interrupt request lines */
@@ -254,7 +254,7 @@ early_hw_init(void)
     write16(
         (0 << SH7750_IPRB_WDT_S) |
         (0 << SH7750_IPRB_REF_S) |
-        (0 << SH7750_IPRB_SCI1_S), 
+        (0 << SH7750_IPRB_SCI1_S),
         SH7750_IPRB);
     write16(
         (0 << SH7750_IPRC_GPIO_S) |
@@ -265,17 +265,17 @@ early_hw_init(void)
 
 }
 
-/* 
+/*
  * cache_on --
- *      Enable instruction and operand caches 
+ *      Enable instruction and operand caches
  */
 void bsp_cache_on(void)
 {
     switch (boot_mode)
     {
         case SH4_BOOT_MODE_FLASH:
-            write32(SH7750_CCR_ICI | SH7750_CCR_ICE | 
-                    SH7750_CCR_OCI | SH7750_CCR_CB | SH7750_CCR_OCE, 
+            write32(SH7750_CCR_ICI | SH7750_CCR_ICE |
+                    SH7750_CCR_OCI | SH7750_CCR_CB | SH7750_CCR_OCE,
                     SH7750_CCR);
             break;
         case SH4_BOOT_MODE_IPL:
diff --git a/c/src/lib/libbsp/sh/gensh4/include/bsp.h b/c/src/lib/libbsp/sh/gensh4/include/bsp.h
index 2f61c6d539..26904aa82a 100644
--- a/c/src/lib/libbsp/sh/gensh4/include/bsp.h
+++ b/c/src/lib/libbsp/sh/gensh4/include/bsp.h
@@ -14,7 +14,7 @@
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * 
+ *
  *
  *  COPYRIGHT (c) 1998-2001.
  *  On-Line Applications Research Corporation (OAR).
@@ -140,7 +140,7 @@ extern void *CPU_Interrupt_stack_high ;
 extern uint32_t   boot_mode;
 #define SH4_BOOT_MODE_FLASH 0
 #define SH4_BOOT_MODE_IPL   1
-  
+
 /* miscellaneous stuff assumed to exist */
 
 extern rtems_configuration_table BSP_Configuration;
@@ -159,7 +159,7 @@ extern void bsp_cleanup( void );
 #define CONSOLE_DRIVER_TABLE_ENTRY \
   { console_initialize, console_open, console_close, \
       console_read, console_write, console_control }
- 
+
 /*
  * NOTE: Use the standard Clock driver entry
  */
diff --git a/c/src/lib/libbsp/sh/gensh4/include/coverhd.h b/c/src/lib/libbsp/sh/gensh4/include/coverhd.h
index 61a20c82f8..4bbc88857d 100644
--- a/c/src/lib/libbsp/sh/gensh4/include/coverhd.h
+++ b/c/src/lib/libbsp/sh/gensh4/include/coverhd.h
@@ -15,7 +15,7 @@
  *         all calling overhead including passing of arguments.
  *
  *
- * These are the figures tmoverhd.exe reported with gcc-2.95.1 -O4 
+ * These are the figures tmoverhd.exe reported with gcc-2.95.1 -O4
  * on a Hitachi SH7045F Evaluation Board with SH7045F at 29 MHz
  *
  * These results are assumed to be applicable to most SH7045/29MHz boards
@@ -27,7 +27,7 @@
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * 
+ *
  *  The license and distribution terms for this file may be
  *  found in the file LICENSE in this distribution or at
  *  http://www.rtems.com/license/LICENSE.
diff --git a/c/src/lib/libbsp/sh/gensh4/include/sdram.h b/c/src/lib/libbsp/sh/gensh4/include/sdram.h
index 7cda7f5cdd..abf72f94e0 100644
--- a/c/src/lib/libbsp/sh/gensh4/include/sdram.h
+++ b/c/src/lib/libbsp/sh/gensh4/include/sdram.h
@@ -8,7 +8,7 @@
  * The license and distribution terms for this file may be
  * found in the file LICENSE in this distribution or at
  *  http://www.rtems.com/license/LICENSE.
- * 
+ *
  * @(#) $Id$
  */
 
diff --git a/c/src/lib/libbsp/sh/gensh4/start/start.S b/c/src/lib/libbsp/sh/gensh4/start/start.S
index 9290fc07c7..0aa7ec66d8 100644
--- a/c/src/lib/libbsp/sh/gensh4/start/start.S
+++ b/c/src/lib/libbsp/sh/gensh4/start/start.S
@@ -19,7 +19,7 @@
  *  TGA Technologies, Inc.
  *  100 Pinnacle Way, Suite 140
  *  Norcross, GA 30071 U.S.A.
- *  
+ *
  *
  *  This modified file may be copied and distributed in accordance
  *  the above-referenced license. It is provided for critique and
@@ -74,7 +74,7 @@ fake_func:
         movt    r9      ! r9 == ! boot_mode
         neg     r9, r9
         add     #1, r9  ! r9 == boot_mode
-        
+
         ! what is in boot_mode?
         cmp/pl  r9      ! r9 > 0  ->  T = 1
 
@@ -84,7 +84,7 @@ fake_func:
 
 #if defined(START_HW_INIT)	/* from $RTEMS_BSP.cfg */
         ! Initialize minimal hardware
-        ! to run hw_init we need to calculate its address 
+        ! to run hw_init we need to calculate its address
         ! as it is before data coping
         mov.l	hw_init_k, r0
         mov.l   copy_start_k, r1
@@ -172,7 +172,7 @@ zero_bss:
         lds     r0,fpscr
 
 
-        ! call the mainline	
+        ! call the mainline
         mov #0,r4		! argc
         mov.l main_k,r0
         jsr @r0
@@ -213,7 +213,7 @@ _vbr_base_k:
 __VBR_Saved_k:
         .long   SYM(_VBR_Saved)
 stack_k:
-        .long	SYM(stack)	
+        .long	SYM(stack)
 __bss_start_k:
         .long   __bss_start
 __bss_end_k:
diff --git a/c/src/lib/libbsp/sh/gensh4/startup/bspstart.c b/c/src/lib/libbsp/sh/gensh4/startup/bspstart.c
index 1a8a434a68..f0b9f04ff8 100644
--- a/c/src/lib/libbsp/sh/gensh4/startup/bspstart.c
+++ b/c/src/lib/libbsp/sh/gensh4/startup/bspstart.c
@@ -26,11 +26,11 @@
 
 #include <bsp.h>
 #include <rtems/libio.h>
- 
+
 #include <rtems/libcsupport.h>
- 
+
 #include <string.h>
- 
+
 /*
  *  The original table from the application and our copy of it with
  *  some changes.
@@ -49,7 +49,7 @@ char *rtems_progname;
 /*
  *  Use the shared implementations of the following routines
  */
- 
+
 void bsp_postdriver_hook(void);
 void bsp_libc_init( void *, uint32_t, int );
 
@@ -65,11 +65,11 @@ void bsp_libc_init( void *, uint32_t, int );
  *      not yet initialized.
  *
  */
- 
+
 void bsp_pretasking_hook(void)
 {
     bsp_libc_init(&HeapStart, (char *)&HeapEnd - (char *)&HeapStart, 0);
- 
+
 #ifdef RTEMS_DEBUG
     rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
 #endif
@@ -84,10 +84,10 @@ void bsp_pretasking_hook(void)
 void bsp_start(void)
 {
   /*
-     For real boards you need to setup the hardware 
+     For real boards you need to setup the hardware
      and need to copy the vector table from rom to ram.
 
-     Depending on the board this can ether be done from inside the rom 
+     Depending on the board this can ether be done from inside the rom
      startup code, rtems startup code or here.
    */
 
@@ -111,10 +111,10 @@ void bsp_start(void)
    */
 
   BSP_Configuration.work_space_start = (void *) &WorkSpaceStart ;
-  BSP_Configuration.work_space_size  = 
-    (uint32_t) &WorkSpaceEnd - 
+  BSP_Configuration.work_space_size  =
+    (uint32_t) &WorkSpaceEnd -
     (uint32_t) &WorkSpaceStart ;
-  
+
   /*
    *  initialize the CPU table for this BSP
    */
@@ -124,7 +124,7 @@ void bsp_start(void)
   _CPU_Interrupt_stack_high = &CPU_Interrupt_stack_high ;
 
   /* This isn't used anywhere */
-  Cpu_table.interrupt_stack_size = 
+  Cpu_table.interrupt_stack_size =
     (uint32_t) (&CPU_Interrupt_stack_high) -
     (uint32_t) (&CPU_Interrupt_stack_low) ;
 #endif
diff --git a/c/src/lib/libbsp/sh/shared/console.c b/c/src/lib/libbsp/sh/shared/console.c
index a6713de4e9..b5796a578f 100644
--- a/c/src/lib/libbsp/sh/shared/console.c
+++ b/c/src/lib/libbsp/sh/shared/console.c
@@ -1,12 +1,12 @@
 /*
  * /dev/console for Hitachi SH 703X
  *
- * The SH doesn't have a designated console device. Therefore we "alias" 
- * another device as /dev/console and revector all calls to /dev/console 
+ * The SH doesn't have a designated console device. Therefore we "alias"
+ * another device as /dev/console and revector all calls to /dev/console
  * to this device.
  *
- * This approach is similar to installing a sym-link from one device to 
- * another device. If rtems once will support sym-links for devices files, 
+ * This approach is similar to installing a sym-link from one device to
+ * another device. If rtems once will support sym-links for devices files,
  * this implementation could be dropped.
  *
  *  Author: Ralf Corsepius (corsepiu@faw.uni-ulm.de)
@@ -16,7 +16,7 @@
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * 
+ *
  *
  *  COPYRIGHT (c) 1998.
  *  On-Line Applications Research Corporation (OAR).
@@ -57,7 +57,7 @@ rtems_device_driver console_initialize(
 )
 {
   rtems_device_driver status;
-  
+
   status = rtems_io_register_name(
     "/dev/console",
     major,
@@ -89,7 +89,7 @@ rtems_device_driver console_open(
     low_level_device_info.minor,
     arg );
 }
- 
+
 /*
  *  Close entry point
  */
@@ -121,7 +121,7 @@ rtems_device_driver console_read(
 }
 
 /*
- * write bytes to the serial port. Stdout and stderr are the same. 
+ * write bytes to the serial port. Stdout and stderr are the same.
  */
 
 rtems_device_driver console_write(
diff --git a/c/src/lib/libbsp/sh/shared/setvec.c b/c/src/lib/libbsp/sh/shared/setvec.c
index 52a48dd5a5..c658ae7fba 100644
--- a/c/src/lib/libbsp/sh/shared/setvec.c
+++ b/c/src/lib/libbsp/sh/shared/setvec.c
@@ -1,7 +1,7 @@
 /*  set_vector
  *
  *  NOTE: This function is considered OBSOLETE and may vanish soon.
- *	Calls to set_vector should be replaced by calls to 
+ *	Calls to set_vector should be replaced by calls to
  *	rtems_interrupt_catch or _CPU_ISR_install_raw_handler.
  *
  *  This routine installs an interrupt vector on the target Board/CPU.
diff --git a/c/src/lib/libbsp/sh/shsim/gdbsci/gdbsci.c b/c/src/lib/libbsp/sh/shsim/gdbsci/gdbsci.c
index 24e17e98ed..db6b4b1fa2 100644
--- a/c/src/lib/libbsp/sh/shsim/gdbsci/gdbsci.c
+++ b/c/src/lib/libbsp/sh/shsim/gdbsci/gdbsci.c
@@ -33,12 +33,12 @@
 #include <sh/sh7_pfc.h>
 #include <sh/sci.h>
 
-/* 
- * gdb assumes area 5/char access (base address & 0x0500000), 
+/*
+ * gdb assumes area 5/char access (base address & 0x0500000),
  * the RTEMS's sh7045 code however defaults to area 5/int/short/char access
  * [Very likely a bug in the sh7045 code, RC.]
  */
- 
+
 #define GDBSCI_BASE 0x05ffffff
 
 #define GDBSCI0_SMR (SCI0_SMR & GDBSCI_BASE)
@@ -58,7 +58,7 @@
 /*
  * NOTE: Only device 1 is valid for the simulator
  */
-  
+
 #define SH_GDBSCI_MINOR_DEVICES       2
 
 /* Force SIGBUS by using an unsupported address for /dev/gdbsci0 */
@@ -91,13 +91,13 @@ static int _sci_set_cflags(
 {
   uint8_t  	smr;
   uint8_t  	brr;
-  
+
   if ( c_cflag & CBAUD )
   {
     if ( _sci_get_brparms( c_cflag, &smr, &brr ) != 0 )
       return -1 ;
   }
-                    
+
   if ( c_cflag & CSIZE )
   {
     if ( c_cflag & CS8 )
@@ -122,28 +122,28 @@ static int _sci_set_cflags(
     smr |= SCI_ODD_PARITY ;
   else
     smr &= ~SCI_ODD_PARITY;
-    
+
   write8( smr, sci_dev->addr + SCI_SMR );
   write8( brr, sci_dev->addr + SCI_BRR );
-  
+
   return 0 ;
 }
 #endif
 
-static void _sci_init( 
+static void _sci_init(
   rtems_device_minor_number minor )
 {
 #if NOT_SUPPORTED_BY_GDB
   uint16_t  	temp16 ;
 
-  /* Pin function controller initialisation for asynchronous mode */  
+  /* Pin function controller initialisation for asynchronous mode */
   if( minor == 0)
     {
       temp16 = read16( PFC_PBCR1);
       temp16 &= ~( PB8MD | PB9MD );
       temp16 |= (PB_TXD0 | PB_RXD0);
       write16( temp16, PFC_PBCR1);
-    } 
+    }
   else
     {
       temp16 = read16( PFC_PBCR1);
@@ -173,7 +173,7 @@ static void _sci_tx_polled(
   const char buf )
 {
   struct scidev_t *scidev = &sci_device[minor] ;
-#if NOT_SUPPORTED_BY_GDB                
+#if NOT_SUPPORTED_BY_GDB
   int8_t           ssr ;
 
   while ( !inb((scidev->addr + SCI_SSR) & SCI_TDRE ))
@@ -181,18 +181,18 @@ static void _sci_tx_polled(
 #endif
   write8(buf,scidev->addr+SCI_TDR);
 
-#if NOT_SUPPORTED_BY_GDB                
+#if NOT_SUPPORTED_BY_GDB
   ssr = inb(scidev->addr+SCI_SSR);
   ssr &= ~SCI_TDRE ;
   write8(ssr,scidev->addr+SCI_SSR);
 #endif
-} 
+}
 
 static int _sci_rx_polled (
   int minor)
 {
   struct scidev_t *scidev = &sci_device[minor] ;
-	
+
   unsigned char c;
 #if NOT_SUPPORTED_BY_GDB
   char ssr ;
@@ -203,9 +203,9 @@ static int _sci_rx_polled (
 
   if ( !(ssr & SCI_RDRF) )
     return -1;
-#endif		
+#endif
   c = read8(scidev->addr + SCI_RDR) ;
-#if NOT_SUPPORTED_BY_GDB  
+#if NOT_SUPPORTED_BY_GDB
   write8(ssr & ~SCI_RDRF,scidev->addr + SCI_SSR);
 #endif
   return c;
@@ -222,7 +222,7 @@ rtems_device_driver sh_gdbsci_initialize(
 {
   rtems_device_driver status ;
   rtems_device_minor_number     i;
-  
+
   /*
    * register all possible devices.
    * the initialization of the hardware is done by sci_open
@@ -239,7 +239,7 @@ rtems_device_driver sh_gdbsci_initialize(
   }
 
   /* default hardware setup */
-  
+
   return RTEMS_SUCCESSFUL;
 }
 
@@ -261,14 +261,14 @@ rtems_device_driver sh_gdbsci_open(
    {
      return RTEMS_INVALID_NUMBER;
    }
- 
+
  /* device already opened */
   if ( sci_device[minor].opened > 0 )
   {
     sci_device[minor].opened++ ;
     return RTEMS_SUCCESSFUL ;
   }
-  
+
   _sci_init( minor );
 
 #if NOT_SUPPORTED_BY_GDB
@@ -291,17 +291,17 @@ rtems_device_driver sh_gdbsci_open(
 
 /* FIXME: Should be one bit delay */
     CPU_delay(50000); /* microseconds */
-    
+
     temp8 |= SCI_RE | SCI_TE;
     write8(temp8, sci_device[minor].addr + SCI_SCR);	/* Enable clock output */
-  }  
+  }
 #endif
 
   sci_device[minor].opened++ ;
 
   return RTEMS_SUCCESSFUL ;
 }
- 
+
 /*
  *  Close entry point
  */
@@ -318,7 +318,7 @@ rtems_device_driver sh_gdbsci_close(
     }
 
   sci_device[minor].opened-- ;
-    
+
   return RTEMS_SUCCESSFUL ;
 }
 
@@ -333,7 +333,7 @@ rtems_device_driver sh_gdbsci_read(
 )
 {
   int count = 0;
- 
+
   rtems_libio_rw_args_t *rw_args = (rtems_libio_rw_args_t *) arg;
   char * buffer = rw_args->buffer;
   int maximum = rw_args->count;
diff --git a/c/src/lib/libbsp/sh/shsim/include/bsp.h b/c/src/lib/libbsp/sh/shsim/include/bsp.h
index 96cca6dc7a..787800f7b6 100644
--- a/c/src/lib/libbsp/sh/shsim/include/bsp.h
+++ b/c/src/lib/libbsp/sh/shsim/include/bsp.h
@@ -10,7 +10,7 @@
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * 
+ *
  *  COPYRIGHT (c) 2001.
  *  On-Line Applications Research Corporation (OAR).
  *
@@ -78,9 +78,9 @@ extern "C" {
 /*
  *  Simple spin delay in microsecond units for device drivers.
  *  This is very dependent on the clock speed of the target.
- * 
+ *
  * FIXME: Not applicable with gdb's simulator
- * Kept for sourcecode compatibility with other sh-BSPs 
+ * Kept for sourcecode compatibility with other sh-BSPs
  */
 #define rtems_bsp_delay( microseconds ) CPU_delay(microseconds)
 #define sh_delay( microseconds ) CPU_delay(microseconds)
@@ -97,7 +97,7 @@ extern uint32_t         WorkSpaceEnd ;
 extern void *CPU_Interrupt_stack_low ;
 extern void *CPU_Interrupt_stack_high ;
 
-  
+
 /* miscellaneous stuff assumed to exist */
 
 extern rtems_configuration_table BSP_Configuration;
@@ -116,7 +116,7 @@ extern void bsp_cleanup( void );
   BSP_CONSOLE_DRIVER_TABLE_ENTRY, \
   { console_initialize, console_open, console_close, \
       console_read, console_write, console_control }
- 
+
 /*
  * NOTE: Use the standard Clock driver entry
  */
diff --git a/c/src/lib/libbsp/sh/shsim/include/gdbsci.h b/c/src/lib/libbsp/sh/shsim/include/gdbsci.h
index 5234fc253a..837aa5fd16 100644
--- a/c/src/lib/libbsp/sh/shsim/include/gdbsci.h
+++ b/c/src/lib/libbsp/sh/shsim/include/gdbsci.h
@@ -8,7 +8,7 @@
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * 
+ *
  *  $Id$
  */
 
@@ -20,7 +20,7 @@ extern "C" {
 #endif
 
 /*
- */ 
+ */
 
 #define DEVGDBSCI_DRIVER_TABLE_ENTRY \
   { sh_gdbsci_initialize, sh_gdbsci_open, sh_gdbsci_close, sh_gdbsci_read, \
diff --git a/c/src/lib/libbsp/sh/shsim/start/start.S b/c/src/lib/libbsp/sh/shsim/start/start.S
index 246a32c0a6..f2e5d62b92 100644
--- a/c/src/lib/libbsp/sh/shsim/start/start.S
+++ b/c/src/lib/libbsp/sh/shsim/start/start.S
@@ -53,7 +53,7 @@ SYM (start):
 	mov.l   vects_k,r0   	! update vbr to point to vectab
 	ldc     r0,vbr
 
-	! call the mainline	
+	! call the mainline
 	mov #0,r4		! argc
 	mov.l main_k,r0
 	jsr @r0
@@ -69,7 +69,7 @@ SYM (start):
 
 	.align 2
 stack_k:
-	.long	SYM(stack)	
+	.long	SYM(stack)
 edata_k:
 	.long	SYM(edata)
 end_k:
diff --git a/c/src/lib/libbsp/sh/shsim/startup/bspstart.c b/c/src/lib/libbsp/sh/shsim/startup/bspstart.c
index 02cb7c1892..83027db6f3 100644
--- a/c/src/lib/libbsp/sh/shsim/startup/bspstart.c
+++ b/c/src/lib/libbsp/sh/shsim/startup/bspstart.c
@@ -43,7 +43,7 @@ char *rtems_progname;
 /*
  *  Use the shared implementations of the following routines
  */
- 
+
 void bsp_postdriver_hook(void);
 void bsp_libc_init( void *, uint32_t, int );
 
@@ -59,11 +59,11 @@ void bsp_libc_init( void *, uint32_t, int );
  *      not yet initialized.
  *
  */
- 
+
 void bsp_pretasking_hook(void)
 {
     bsp_libc_init(&HeapStart, (char *)&HeapEnd - (char *)&HeapStart, 0);
- 
+
 #ifdef RTEMS_DEBUG
     rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
 #endif
@@ -78,13 +78,13 @@ void bsp_pretasking_hook(void)
 void bsp_start( void )
 {
   /*
-     For real boards you need to setup the hardware 
+     For real boards you need to setup the hardware
      and need to copy the vector table from rom to ram.
 
-     Depending on the board this can either be done from inside the rom 
+     Depending on the board this can either be done from inside the rom
      startup code, rtems startup code or here.
    */
-   
+
   /*
    *  Allocate the memory for the RTEMS Work Space.  This can come from
    *  a variety of places: hard coded address, malloc'ed from outside
@@ -100,10 +100,10 @@ void bsp_start( void )
    */
 
   BSP_Configuration.work_space_start = (void *) &WorkSpaceStart ;
-  BSP_Configuration.work_space_size  = 
-    (uint32_t) &WorkSpaceEnd - 
+  BSP_Configuration.work_space_size  =
+    (uint32_t) &WorkSpaceEnd -
     (uint32_t) &WorkSpaceStart ;
-  
+
   /*
    *  initialize the CPU table for this BSP
    */
@@ -112,7 +112,7 @@ void bsp_start( void )
   _CPU_Interrupt_stack_low = &CPU_Interrupt_stack_low ;
   _CPU_Interrupt_stack_high = &CPU_Interrupt_stack_high ;
 
-  Cpu_table.interrupt_stack_size = 
+  Cpu_table.interrupt_stack_size =
     (uint32_t) (&CPU_Interrupt_stack_high) -
     (uint32_t) (&CPU_Interrupt_stack_low) ;
 #endif
@@ -120,7 +120,7 @@ void bsp_start( void )
 
   Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
   Cpu_table.postdriver_hook = bsp_postdriver_hook;
-  
+
 #if ( CPU_ALLOCATE_INTERRUPT_STACK == TRUE )
   Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;
 #endif
diff --git a/c/src/lib/libbsp/sh/shsim/trap34/console-io.c b/c/src/lib/libbsp/sh/shsim/trap34/console-io.c
index 953aea6dae..b8088886bd 100644
--- a/c/src/lib/libbsp/sh/shsim/trap34/console-io.c
+++ b/c/src/lib/libbsp/sh/shsim/trap34/console-io.c
@@ -2,7 +2,7 @@
  *  This file contains the hardware specific portions of the TTY driver
  *  for the simulators stdin/out.
  *
- *  Logic based on newlib-1.8.2/newlib/libc/sys/sh/syscalls.c 
+ *  Logic based on newlib-1.8.2/newlib/libc/sys/sh/syscalls.c
  *
  *  COPYRIGHT (c) 1989-2000.
  *  On-Line Applications Research Corporation (OAR).
@@ -56,7 +56,7 @@ void console_outbyte_polled(
 }
 
 /*
- *  console_inbyte_nonblocking 
+ *  console_inbyte_nonblocking
  *
  *  This routine polls for a character.
  */
diff --git a/c/src/lib/libbsp/sh/shsim/trap34/console-support.S b/c/src/lib/libbsp/sh/shsim/trap34/console-support.S
index a317d755cc..3aef9c7e24 100644
--- a/c/src/lib/libbsp/sh/shsim/trap34/console-support.S
+++ b/c/src/lib/libbsp/sh/shsim/trap34/console-support.S
@@ -14,7 +14,7 @@ ___trap34:
 ret:
         rts
         nop
-         
+
         .align  2
 perrno:
         .long   _errno
diff --git a/c/src/lib/libbsp/sh/simsh4/clock/ckinit.c b/c/src/lib/libbsp/sh/simsh4/clock/ckinit.c
index 3712597b34..c434f6892e 100644
--- a/c/src/lib/libbsp/sh/simsh4/clock/ckinit.c
+++ b/c/src/lib/libbsp/sh/simsh4/clock/ckinit.c
@@ -29,7 +29,7 @@ volatile uint32_t         Clock_driver_ticks;
 /*
  * These are set by clock driver during its init
  */
- 
+
 rtems_device_major_number rtems_clock_major = ~0;
 rtems_device_minor_number rtems_clock_minor;
 
@@ -39,8 +39,8 @@ static void
 set_clock_period(uint32_t         period)
 {
     asm volatile ("\tmov %0,r0\n"
-                  "\ttrapa\t#4\n" 
-                  : 
+                  "\ttrapa\t#4\n"
+                  :
                   : "r" (period)
                   : "r0" );
 }
@@ -103,15 +103,15 @@ Install_clock(rtems_isr_entry clock_isr)
     if (BSP_Configuration.ticks_per_timeslice)
     {
         rtems_isr_entry  old_isr;
-        period = Cpu_table.clicks_per_second / 
+        period = Cpu_table.clicks_per_second /
                  BSP_Configuration.ticks_per_timeslice;
-        
+
         /* Configure timer interrupts */
         set_clock_period(period);
-        
+
         /* Register the interrupt handler */
         rtems_interrupt_catch(clock_isr, CLOCK_VECTOR, &old_isr);
-        
+
         /* Register the driver exit procedure so we can shutdown */
         atexit(Clock_exit);
     }
@@ -137,14 +137,14 @@ Clock_initialize(rtems_device_major_number major,
                  void *pargp)
 {
     Install_clock (Clock_isr);
- 
+
     /* Make major/minor avail to others such as shared memory driver */
     rtems_clock_major = major;
     rtems_clock_minor = minor;
- 
+
     return RTEMS_SUCCESSFUL;
 }
- 
+
 
 /* Clock_control --
  *     I/O control (IOCTL) function for Clock driver. At this moment this
@@ -174,7 +174,7 @@ Clock_control(rtems_device_major_number major,
          * This is hokey, but until we get a defined interface
          * to do this, it will just be this simple...
          */
-        if (args->command == rtems_build_name('I', 'S', 'R', ' ')) 
+        if (args->command == rtems_build_name('I', 'S', 'R', ' '))
         {
             Clock_isr(CLOCK_VECTOR);
         }
diff --git a/c/src/lib/libbsp/sh/simsh4/console/console.c b/c/src/lib/libbsp/sh/simsh4/console/console.c
index a8905b286a..f6d12c20d2 100644
--- a/c/src/lib/libbsp/sh/simsh4/console/console.c
+++ b/c/src/lib/libbsp/sh/simsh4/console/console.c
@@ -164,7 +164,7 @@ console_first_open(int major, int minor, void *arg)
     {
         return RTEMS_INVALID_NUMBER; /* Single console supported */
     }
-    
+
     return RTEMS_SUCCESSFUL;
 }
 
@@ -251,8 +251,8 @@ console_initialize(rtems_device_major_number major,
  * RETURNS:
  *     RTEMS error code
  */
-rtems_device_driver 
-console_open(rtems_device_major_number major, 
+rtems_device_driver
+console_open(rtems_device_major_number major,
              rtems_device_minor_number minor,
              void *arg)
 {
@@ -281,10 +281,10 @@ console_open(rtems_device_major_number major,
     {
         case CONSOLE_MODE_RAW:
             return RTEMS_SUCCESSFUL;
-            
+
         case CONSOLE_MODE_INT:
             return rtems_termios_open(major, minor, arg, &intr_callbacks);
-            
+
         case CONSOLE_MODE_POLL:
             return rtems_termios_open(major, minor, arg, &poll_callbacks);
 
@@ -305,7 +305,7 @@ console_open(rtems_device_major_number major,
  * RETURNS:
  *     RTEMS error code
  */
-rtems_device_driver 
+rtems_device_driver
 console_close(rtems_device_major_number major,
               rtems_device_minor_number minor,
               void *arg)
@@ -415,7 +415,7 @@ rtems_device_driver
 console_control(rtems_device_major_number major,
                 rtems_device_minor_number minor,
                 void *arg)
-{ 
+{
     if (console_mode != CONSOLE_MODE_RAW)
     {
         return rtems_termios_ioctl (arg);
diff --git a/c/src/lib/libbsp/sh/simsh4/include/bsp.h b/c/src/lib/libbsp/sh/simsh4/include/bsp.h
index 7d89f5bec1..4b9205b4b5 100644
--- a/c/src/lib/libbsp/sh/simsh4/include/bsp.h
+++ b/c/src/lib/libbsp/sh/simsh4/include/bsp.h
@@ -15,7 +15,7 @@
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * 
+ *
  *
  *  COPYRIGHT (c) 1998-2001.
  *  On-Line Applications Research Corporation (OAR).
@@ -116,7 +116,7 @@ extern uint32_t         WorkSpaceEnd ;
 extern void *CPU_Interrupt_stack_low ;
 extern void *CPU_Interrupt_stack_high ;
 
-  
+
 /* miscellaneous stuff assumed to exist */
 
 extern rtems_configuration_table BSP_Configuration;
@@ -137,8 +137,8 @@ extern void bsp_cleanup( void );
 #define RAMDISK_DRIVER_TABLE_ENTRY \
   { ramdisk_initialize, ramdisk_open, ramdisk_close, \
         ramdisk_read, ramdisk_write, ramdisk_control }
-      
- 
+
+
 /*
  * NOTE: Use the standard Clock driver entry
  */
diff --git a/c/src/lib/libbsp/sh/simsh4/include/coverhd.h b/c/src/lib/libbsp/sh/simsh4/include/coverhd.h
index d695503506..d51bcc7033 100644
--- a/c/src/lib/libbsp/sh/simsh4/include/coverhd.h
+++ b/c/src/lib/libbsp/sh/simsh4/include/coverhd.h
@@ -18,7 +18,7 @@
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * 
+ *
  *  The license and distribution terms for this file may be
  *  found in the file LICENSE in this distribution or at
  *  http://www.rtems.com/license/LICENSE.
diff --git a/c/src/lib/libbsp/sh/simsh4/start/start.S b/c/src/lib/libbsp/sh/simsh4/start/start.S
index 27e13a5fb6..0466ded3e5 100644
--- a/c/src/lib/libbsp/sh/simsh4/start/start.S
+++ b/c/src/lib/libbsp/sh/simsh4/start/start.S
@@ -19,7 +19,7 @@
  *  TGA Technologies, Inc.
  *  100 Pinnacle Way, Suite 140
  *  Norcross, GA 30071 U.S.A.
- *  
+ *
  *
  *  This modified file may be copied and distributed in accordance
  *  the above-referenced license. It is provided for critique and
@@ -81,7 +81,7 @@ SYM (start):
         mov.l   initial_fpscr_k,r0
         lds     r0,fpscr
 
-	! call the mainline	
+	! call the mainline
 	mov #0,r4		! argc
 	mov.l main_k,r0
 	jsr @r0
@@ -107,7 +107,7 @@ ___trap34:
 !ret:
 	rts
 	nop
-	
+
 !	.align	2
 !perrno:
 !	.long	_errno
@@ -122,7 +122,7 @@ _vbr_base_k:
         .long   SYM(_vbr_base)
 
 stack_k:
-	.long	SYM(stack)	
+	.long	SYM(stack)
 edata_k:
 	.long	SYM(edata)
 end_k:
diff --git a/c/src/lib/libbsp/sh/simsh4/startup/bspstart.c b/c/src/lib/libbsp/sh/simsh4/startup/bspstart.c
index 1a8a434a68..f0b9f04ff8 100644
--- a/c/src/lib/libbsp/sh/simsh4/startup/bspstart.c
+++ b/c/src/lib/libbsp/sh/simsh4/startup/bspstart.c
@@ -26,11 +26,11 @@
 
 #include <bsp.h>
 #include <rtems/libio.h>
- 
+
 #include <rtems/libcsupport.h>
- 
+
 #include <string.h>
- 
+
 /*
  *  The original table from the application and our copy of it with
  *  some changes.
@@ -49,7 +49,7 @@ char *rtems_progname;
 /*
  *  Use the shared implementations of the following routines
  */
- 
+
 void bsp_postdriver_hook(void);
 void bsp_libc_init( void *, uint32_t, int );
 
@@ -65,11 +65,11 @@ void bsp_libc_init( void *, uint32_t, int );
  *      not yet initialized.
  *
  */
- 
+
 void bsp_pretasking_hook(void)
 {
     bsp_libc_init(&HeapStart, (char *)&HeapEnd - (char *)&HeapStart, 0);
- 
+
 #ifdef RTEMS_DEBUG
     rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
 #endif
@@ -84,10 +84,10 @@ void bsp_pretasking_hook(void)
 void bsp_start(void)
 {
   /*
-     For real boards you need to setup the hardware 
+     For real boards you need to setup the hardware
      and need to copy the vector table from rom to ram.
 
-     Depending on the board this can ether be done from inside the rom 
+     Depending on the board this can ether be done from inside the rom
      startup code, rtems startup code or here.
    */
 
@@ -111,10 +111,10 @@ void bsp_start(void)
    */
 
   BSP_Configuration.work_space_start = (void *) &WorkSpaceStart ;
-  BSP_Configuration.work_space_size  = 
-    (uint32_t) &WorkSpaceEnd - 
+  BSP_Configuration.work_space_size  =
+    (uint32_t) &WorkSpaceEnd -
     (uint32_t) &WorkSpaceStart ;
-  
+
   /*
    *  initialize the CPU table for this BSP
    */
@@ -124,7 +124,7 @@ void bsp_start(void)
   _CPU_Interrupt_stack_high = &CPU_Interrupt_stack_high ;
 
   /* This isn't used anywhere */
-  Cpu_table.interrupt_stack_size = 
+  Cpu_table.interrupt_stack_size =
     (uint32_t) (&CPU_Interrupt_stack_high) -
     (uint32_t) (&CPU_Interrupt_stack_low) ;
 #endif
diff --git a/c/src/lib/libbsp/sh/simsh4/startup/hw_init.c b/c/src/lib/libbsp/sh/simsh4/startup/hw_init.c
index 283897128e..7cc392a508 100644
--- a/c/src/lib/libbsp/sh/simsh4/startup/hw_init.c
+++ b/c/src/lib/libbsp/sh/simsh4/startup/hw_init.c
@@ -52,6 +52,6 @@ early_hw_init (void)
  * RETURNS:
  *     none
  */
-void bsp_hw_init (void) 
+void bsp_hw_init (void)
 {
 }
diff --git a/c/src/lib/libbsp/sh/simsh4/timer/timer.c b/c/src/lib/libbsp/sh/simsh4/timer/timer.c
index d0084fcb54..236f4fd226 100644
--- a/c/src/lib/libbsp/sh/simsh4/timer/timer.c
+++ b/c/src/lib/libbsp/sh/simsh4/timer/timer.c
@@ -13,7 +13,7 @@
  *  found in the file LICENSE in this distribution or at
  *
  *  http://www.rtems.com/license/LICENSE.
- * 
+ *
  *  $Id$
  */