diff options
author | Joel Sherrill <joel.sherrill@OARcorp.com> | 1998-06-23 17:40:00 +0000 |
---|---|---|
committer | Joel Sherrill <joel.sherrill@OARcorp.com> | 1998-06-23 17:40:00 +0000 |
commit | ae21568caad6d15e32611f5550d85e02d7053fcc (patch) | |
tree | d2daa13a29007ecb4e7bb619d7b06504a084d8b1 /c/src/lib | |
parent | Added numerous comments. (diff) | |
download | rtems-ae21568caad6d15e32611f5550d85e02d7053fcc.tar.bz2 |
New file describing mc68681 libchip driver.
Diffstat (limited to 'c/src/lib')
-rw-r--r-- | c/src/lib/libchip/serial/README.mc68681 | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/c/src/lib/libchip/serial/README.mc68681 b/c/src/lib/libchip/serial/README.mc68681 new file mode 100644 index 0000000000..4364dac5d5 --- /dev/null +++ b/c/src/lib/libchip/serial/README.mc68681 @@ -0,0 +1,39 @@ +# +# $Id$ +# + +Configuration Table Use +======================= + +pDeviceFlow + + This field is ignored as hardware flow control is not currently supported. + +ulCtrlPort1 + + This field is the base address of the entire DUART. + +ulCtrlPort2 + + This field is the base address of the port specific registers. + +ulDataPort + + This field is bit mapped as follows: + bit 0: 0 or 1 to indicate the A or B port on the DUART. + bit 1: baud rate set a or b + + + Note: If both ports on single DUART are not configured for the same + baud rate set, then unexpected results will occur. + +getRegister +setRegister + These follow standard conventions. + +getData +setData + These are unused since the TX and RX data registers can be accessed + as regular registers. + + |