The files in libcpu should not be directly dependent on any BSP. In

particular, using bsp.h, or getting information from the BSP which
should properly be obtained from RTEMS is forbidden.  This is
necessary to strengthen the division between the BSP independent
parts of RTEMS and the BSPs themselves.  This started after
comments and analysis by Ralf Corsepius <corsepiu@faw.uni-ulm.de>.
The changes primarily eliminated the need to include bsp.h and
peeking at BSP_Configuration.  The use of Cpu_table in each
BSP needs to be eliminated.

10 files changed, 8 insertions, 21 deletions

diff --git a/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in
index b69e86feea..df95503c19 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/ppc403/clock/Makefile.in
@@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS}
 
 all: ${ARCH} $(SRCS) $(PGM)
 
-# the .rel file built here will be put into libbsp.a by
-#    libbsp/hppa/BSP/wrapup/Makefile
 install: all
 
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
diff --git a/c/src/lib/libcpu/powerpc/ppc403/clock/clock.c b/c/src/lib/libcpu/powerpc/ppc403/clock/clock.c
index 99b538dcd3..dfcbea5535 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/clock/clock.c
+++ b/c/src/lib/libcpu/powerpc/ppc403/clock/clock.c
@@ -37,7 +37,7 @@
  *  $Id$
  */
 
-#include <bsp.h>
+#include <rtems.h>
 #include <clockdrv.h>
 #include <rtems/libio.h>
 
@@ -164,11 +164,10 @@ void Install_clock(rtems_isr_entry clock_isr)
     else if ((pvr & 0xff00) == 0x0100) /* 403GB */
       auto_restart = 1;
  
-    pit_value = BSP_Configuration.microseconds_per_tick *
+    pit_value = rtems_configuration_get_microseconds_per_tick() *
       Cpu_table.clicks_per_usec;
  
-    if (BSP_Configuration.ticks_per_timeslice)
-    {
+    if ( rtems_configuration_get_ticks_per_timeslice() ) {
       register rtems_unsigned32 tcr;
 
         /*
@@ -218,8 +217,7 @@ ReInstall_clock(rtems_isr_entry new_clock_isr)
 void
 Clock_exit(void)
 {
-    if ( BSP_Configuration.ticks_per_timeslice )
-    {
+    if ( rtems_configuration_get_ticks_per_timeslice() ) {
       register rtems_unsigned32 tcr;
  
       asm volatile ("mfspr %0, 0x3da" : "=r" ((tcr))); /* TCR */
diff --git a/c/src/lib/libcpu/powerpc/ppc403/console/console.c b/c/src/lib/libcpu/powerpc/ppc403/console/console.c
index 8d073b672b..b1fc7bfe9c 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/console/console.c
+++ b/c/src/lib/libcpu/powerpc/ppc403/console/console.c
@@ -56,7 +56,7 @@
 
 #define NO_BSP_INIT
 
-#include <bsp.h>
+#include <rtems.h>
 #include <rtems/libio.h>
 #include "../ictrl/ictrl.h"
 #include <stdlib.h>                                     /* for atexit() */
diff --git a/c/src/lib/libcpu/powerpc/ppc403/console/console.c.polled b/c/src/lib/libcpu/powerpc/ppc403/console/console.c.polled
index a623dde95a..e5d3b6fbce 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/console/console.c.polled
+++ b/c/src/lib/libcpu/powerpc/ppc403/console/console.c.polled
@@ -31,7 +31,7 @@
 
 #define NO_BSP_INIT
 
-#include <bsp.h>
+#include <rtems.h>
 #include <rtems/libio.h>
 
 extern rtems_cpu_table           Cpu_table;             /* owned by BSP */
diff --git a/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in
index bb29e2c931..9d8d10ee23 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/ppc403/ictrl/Makefile.in
@@ -69,8 +69,6 @@ ${PGM}: ${SRCS} ${OBJS}
 all: ${ARCH} $(SRCS) $(PGM)
 	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)
 
-# the .rel file built here will be put into libbsp.a by
-#    libbsp/hppa/BSP/wrapup/Makefile
 install: all
 
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
diff --git a/c/src/lib/libcpu/powerpc/ppc403/ictrl/ictrl.c b/c/src/lib/libcpu/powerpc/ppc403/ictrl/ictrl.c
index 11d09f748a..8f808d432d 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/ictrl/ictrl.c
+++ b/c/src/lib/libcpu/powerpc/ppc403/ictrl/ictrl.c
@@ -21,7 +21,7 @@
  */
 
 #include "ictrl.h"
-#include <bsp.h>
+#include <rtems.h>
 #include <rtems/libio.h>
 
 #include <stdlib.h>                     /* for atexit() */
diff --git a/c/src/lib/libcpu/powerpc/ppc403/include/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/include/Makefile.in
index 344f4da03d..aafe051965 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/include/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/ppc403/include/Makefile.in
@@ -1,10 +1,6 @@
 #
 #  $Id$
 #
-# Install any include files needed by libcpu.
-# Mainly this just means bsp.h which would normally be installed
-# after libcpu is built.
-# This is a bit of a hack.
 
 @SET_MAKE@
 srcdir = @srcdir@
diff --git a/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in b/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in
index af94bb3abf..68f727435c 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/ppc403/timer/Makefile.in
@@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS}
 
 all: ${ARCH} $(SRCS) $(PGM)
 
-# the .rel file built here will be put into libbsp.a by
-#    libbsp/hppa/BSP/wrapup/Makefile
 install: all
 
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
diff --git a/c/src/lib/libcpu/powerpc/ppc403/timer/timer.c b/c/src/lib/libcpu/powerpc/ppc403/timer/timer.c
index 0881eef128..0ff48aec90 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/timer/timer.c
+++ b/c/src/lib/libcpu/powerpc/ppc403/timer/timer.c
@@ -34,7 +34,6 @@
  *  $Id$
  */
 
-#include <bsp.h>
 #include <rtems.h>
 
 extern rtems_cpu_table           Cpu_table;             /* owned by BSP */
diff --git a/c/src/lib/libcpu/powerpc/ppc403/vectors/align_h.S b/c/src/lib/libcpu/powerpc/ppc403/vectors/align_h.S
index d16298343d..b8ead27032 100644
--- a/c/src/lib/libcpu/powerpc/ppc403/vectors/align_h.S
+++ b/c/src/lib/libcpu/powerpc/ppc403/vectors/align_h.S
@@ -44,7 +44,7 @@
  */
 
 #include "asm.h"
-#include "bsp.h"
+#include "rtems.h"
 
 .set    CACHE_SIZE,16           # cache line size of 32 bytes
 .set    CACHE_SIZE_L2,4         # cache line size, log 2