The files in libcpu should not be directly dependent on any BSP. In

particular, using bsp.h, or getting information from the BSP which
should properly be obtained from RTEMS is forbidden.  This is
necessary to strengthen the division between the BSP independent
parts of RTEMS and the BSPs themselves.  This started after
comments and analysis by Ralf Corsepius <corsepiu@faw.uni-ulm.de>.
The changes primarily eliminated the need to include bsp.h and
peeking at BSP_Configuration.  The use of Cpu_table in each
BSP needs to be eliminated.

7 files changed, 3 insertions, 15 deletions

diff --git a/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in b/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in
index c4178b8077..dfd133eaf1 100644
--- a/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc821/clock/Makefile.in
@@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS}
 
 all: ${ARCH} $(SRCS) $(PGM)
 
-# the .rel file built here will be put into libbsp.a by
-#    libbsp/hppa/BSP/wrapup/Makefile
 install: all
 
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
diff --git a/c/src/lib/libcpu/powerpc/mpc821/clock/clock.c b/c/src/lib/libcpu/powerpc/mpc821/clock/clock.c
index bf11c9bcbb..ce27c426a9 100644
--- a/c/src/lib/libcpu/powerpc/mpc821/clock/clock.c
+++ b/c/src/lib/libcpu/powerpc/mpc821/clock/clock.c
@@ -36,7 +36,6 @@
  *  $Id$
  */
 
-#include <bsp.h>
 #include <clockdrv.h>
 #include <rtems/libio.h>
 
@@ -74,7 +73,7 @@ void Install_clock(rtems_isr_entry clock_isr)
   
   Clock_driver_ticks = 0;
   
-  pit_value = BSP_Configuration.microseconds_per_tick /
+  pit_value = rtems_configuration_get_microseconds_per_tick() /
                Cpu_table.clicks_per_usec;
   if (pit_value == 0) {
     pit_value = 0xffff;
@@ -85,7 +84,7 @@ void Install_clock(rtems_isr_entry clock_isr)
   if (pit_value > 0xffff) {           /* pit is only 16 bits long */
     rtems_fatal_error_occurred(-1);
   }  
-  if (BSP_Configuration.ticks_per_timeslice) {
+  if ( rtems_configuration_get_ticks_per_timeslice() ) {
     
     /*
      * initialize the interval here
@@ -131,7 +130,7 @@ ReInstall_clock(rtems_isr_entry new_clock_isr)
 void
 Clock_exit(void)
 {
-  if ( BSP_Configuration.ticks_per_timeslice ) {
+  if ( rtems_configuration_get_ticks_per_timeslice() ) {
     /* disable PIT and PIT interrupts */
     m821.piscr &= ~(M821_PISCR_PTE | M821_PISCR_PIE); 
     
diff --git a/c/src/lib/libcpu/powerpc/mpc821/console-generic/console-generic.c b/c/src/lib/libcpu/powerpc/mpc821/console-generic/console-generic.c
index 8e8b876379..4b6a3a308b 100644
--- a/c/src/lib/libcpu/powerpc/mpc821/console-generic/console-generic.c
+++ b/c/src/lib/libcpu/powerpc/mpc821/console-generic/console-generic.c
@@ -42,7 +42,6 @@
  *  $Id$
  */
 
-#include <bsp.h>
 #include <rtems/libio.h>
 #include <mpc821.h>
 #include <mpc821/console.h>
diff --git a/c/src/lib/libcpu/powerpc/mpc821/include/Makefile.in b/c/src/lib/libcpu/powerpc/mpc821/include/Makefile.in
index 0eba787c45..7d0bbf9f31 100644
--- a/c/src/lib/libcpu/powerpc/mpc821/include/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc821/include/Makefile.in
@@ -1,10 +1,6 @@
 #
 #  $Id$
 #
-# Install any include files needed by libcpu.
-# Mainly this just means bsp.h which would normally be installed
-# after libcpu is built.
-# This is a bit of a hack.
 
 @SET_MAKE@
 srcdir = @srcdir@
diff --git a/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in b/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in
index 2bb4b3782a..f1ef92cbe5 100644
--- a/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in
+++ b/c/src/lib/libcpu/powerpc/mpc821/timer/Makefile.in
@@ -62,8 +62,6 @@ ${PGM}: ${SRCS} ${OBJS}
 
 all: ${ARCH} $(SRCS) $(PGM)
 
-# the .rel file built here will be put into libbsp.a by
-#    libbsp/hppa/BSP/wrapup/Makefile
 install: all
 
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
diff --git a/c/src/lib/libcpu/powerpc/mpc821/timer/timer.c b/c/src/lib/libcpu/powerpc/mpc821/timer/timer.c
index 0700fea807..d9c42e9565 100644
--- a/c/src/lib/libcpu/powerpc/mpc821/timer/timer.c
+++ b/c/src/lib/libcpu/powerpc/mpc821/timer/timer.c
@@ -43,7 +43,6 @@
  *  $Id$
  */
 
-#include <bsp.h>
 #include <rtems.h>
 #include <mpc821.h>
 
diff --git a/c/src/lib/libcpu/powerpc/mpc821/vectors/align_h.S b/c/src/lib/libcpu/powerpc/mpc821/vectors/align_h.S
index 9a785e347d..98b5ea891a 100644
--- a/c/src/lib/libcpu/powerpc/mpc821/vectors/align_h.S
+++ b/c/src/lib/libcpu/powerpc/mpc821/vectors/align_h.S
@@ -44,7 +44,6 @@
  */
 
 #include "asm.h"
-/*#include "bsp.h"*/
 #define ALIGN_REGS 0x0140
 
 .set    CACHE_SIZE,16           # cache line size of 32 bytes