MPC821 support and PPC patches from Andrew Bray <andy@madhouse.demon.co.uk>:

  In c/src/exec/score/cpu/powerpc/rtems/score/ppc.h:

    A lot of hardware interrupts were omitted.  Patch enclosed.
    I have also added the 821.

  In c/src/exec/score/cpu/powerpc/rtems/score/cpu.h:

    My patch adds the 821.

  In c/src/exec/score/cpu/powerpc/cpu.c:

    I have added the MPC821, and also fixed up for the missing hardware
    interrupts.  It is also inconsistent with
    c/src/lib/libcpu/powerpc/mpc860/vectors/vectors.S.  This has been fixed.


  In c/src/lib/libcpu/powerpc/mpc860/vectors/vectors.S:

    Fixed an inconsistency with cpu.c.

    I also include some new files to go with the above patches.  These are the
    cpu library rtems-19990331/c/src/lib/libcpu/powerpc/mpc821/* and
    c/src/exec/score/cpu/powerpc/mpc821.h which are minor modifications of
    the 860 equivalents.

  Other comments:

    The various accesses to the DPRAM on the 860 are done with a linktime
    symbol. This could be done dynamically at run time by reading the immr
    register, and masking off the lower 16 bits.  This takes the same amount
    of time as loading an address constant, and the same number of
    instructions as well (2).

    In c/src/lib/libcpu/powerpc/mpc860/console-generic/console-generic.c:

      This will silently fail if you attempt to use SCC1.  This is only relevant
      if you are not using SCC1 for ethernet.

      This file also sets one of port B output pins for each port.  This is NOT
      generic, it should be in the BSP specific console driver.

1 files changed, 70 insertions, 0 deletions

diff --git a/c/src/lib/libcpu/powerpc/mpc821/vectors/Makefile.in b/c/src/lib/libcpu/powerpc/mpc821/vectors/Makefile.in
new file mode 100644
index 0000000000..f2be2a2c68
--- /dev/null
+++ b/c/src/lib/libcpu/powerpc/mpc821/vectors/Makefile.in
@@ -0,0 +1,70 @@
+#
+#  $Id$
+#
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+top_builddir = ../../../../../../..
+subdir = c/src/lib/libcpu/powerpc/mpc821/vectors
+
+INSTALL = @INSTALL@
+
+RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+VPATH = @srcdir@
+
+PGM=${ARCH}/vectors.rel
+
+# C source names, if any, go here -- minus the .c
+C_PIECES=
+C_FILES=$(C_PIECES:%=%.c)
+C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
+
+H_FILES=
+
+# Assembly source names, if any, go here -- minus the .s
+S_PIECES=vectors align_h
+S_FILES=$(S_PIECES:%=%.S)
+S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o)
+
+SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
+OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
+
+include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+DEFINES  +=
+CPPFLAGS +=
+CFLAGS   +=
+
+LD_PATHS  +=
+LD_LIBS   +=
+LDFLAGS   +=
+
+#
+# Add your list of files to delete here.  The config files
+#  already know how to delete some stuff, so you may want
+#  to just run 'make clean' first to see what gets missed.
+#  'make clobber' already includes 'make clean'
+#
+
+CLEAN_ADDITIONS +=
+CLOBBER_ADDITIONS +=
+
+${PGM}: ${SRCS} ${OBJS}
+	$(make-rel)
+
+all:	${ARCH} $(SRCS) $(PGM)
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+install:  all
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status