MVME2307 does not really include MP support.

5 files changed, 0 insertions, 311 deletions

diff --git a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/Makefile.in b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/Makefile.in
deleted file mode 100644
index 83b107d81a..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/Makefile.in
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = powerpc/mvme2307/shmsupp
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGM=${ARCH}/shmsupp.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES=addrconv getcfg lock mpisr
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES=
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES=
-S_FILES=$(S_PIECES:%=%.S)
-S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES  +=
-CPPFLAGS +=
-CFLAGS   +=
-
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-${PGM}: ${SRCS} ${OBJS}
-	$(make-rel)
-
-all:	${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/addrconv.c b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/addrconv.c
deleted file mode 100644
index 95b44d95fd..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/addrconv.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*  Shm_Convert_address
- *
- *  No address range conversion is required.
- *
- *  Input parameters:
- *    address - address to convert
- *
- *  Output parameters:
- *    returns - converted address
- *
- *  COPYRIGHT (c) 1989-1998.
- *  On-Line Applications Research Corporation (OAR).
- *  Copyright assigned to U.S. Government, 1994.
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.OARcorp.com/rtems/license.html.
- *
- *  $Id$
- */
-
-#include <rtems.h>
-#include <bsp.h>
-#include <shm.h>
-
-void *Shm_Convert_address(
-  void *address
-)
-{
-  return ( address );
-}
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/getcfg.c b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/getcfg.c
deleted file mode 100644
index 587345df83..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/getcfg.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*  void Shm_Get_configuration( localnode, &shmcfg )
- *
- *  This routine initializes, if necessary, and returns a pointer
- *  to the Shared Memory Configuration Table for the XXX target.
- *
- *  INPUT PARAMETERS:
- *    localnode - local node number
- *    shmcfg    - address of pointer to SHM Config Table
- *
- *  OUTPUT PARAMETERS:
- *    *shmcfg   - pointer to SHM Config Table
- *
-XXX: FIX THE COMMENTS BELOW WHEN THE CPU IS KNOWN
- *  NOTES:  The XYZ does not have an interprocessor interrupt.
- *
- *          The following table illustrates the configuration limitations:
- *
- *                                   BUS     MAX
- *                          MODE    ENDIAN  NODES
- *                        ========= ====== =======
- *                         POLLED    BIG    2+
- *                        INTERRUPT **** NOT SUPPORTED ****
- *
- *  COPYRIGHT (c) 1989-1998.
- *  On-Line Applications Research Corporation (OAR).
- *  Copyright assigned to U.S. Government, 1994.
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.OARcorp.com/rtems/license.html.
- *
- *  $Id$
- */
-
-#include <rtems.h>
-#include <bsp.h>
-#include <shm.h>
-
-/*
- *  configured if currently polling of interrupt driven
- */
-
-#define INTERRUPT 0        /* XXX: */
-#define POLLING   1        /* XXX: fix me -- is polling ONLY!!! */
-
-
-shm_config_table BSP_shm_cfgtbl;
-
-void Shm_Get_configuration(
-  rtems_unsigned32   localnode,
-  shm_config_table **shmcfg
-)
-{
-   BSP_shm_cfgtbl.base         = 0x0;
-   BSP_shm_cfgtbl.length       = 1 * MEGABYTE;
-   BSP_shm_cfgtbl.format       = SHM_BIG;
-
-   /*
-    *  Override cause_intr or shm_isr if your target has
-    *  special requirements.
-    */
-
-   BSP_shm_cfgtbl.cause_intr   = Shm_Cause_interrupt;
-
-#ifdef NEUTRAL_BIG
-   BSP_shm_cfgtbl.convert      = NULL_CONVERT;
-#else
-   BSP_shm_cfgtbl.convert      = CPU_swap_u32;
-#endif
-
-   BSP_shm_cfgtbl.poll_intr    = POLLED_MODE;
-   BSP_shm_cfgtbl.Intr.address = NO_INTERRUPT;
-   BSP_shm_cfgtbl.Intr.value   = NO_INTERRUPT;
-   BSP_shm_cfgtbl.Intr.length  = NO_INTERRUPT;
-
-   *shmcfg = &BSP_shm_cfgtbl;
-}
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/lock.c b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/lock.c
deleted file mode 100644
index 7101bbd4e0..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/lock.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*  Shared Memory Lock Routines
- *
- *  This shared memory locked queue support routine need to be
- *  able to lock the specified locked queue.  Interrupts are
- *  disabled while the queue is locked to prevent preemption
- *  and deadlock when two tasks poll for the same lock.
- *  previous level.
- *
- *  COPYRIGHT (c) 1989-1998.
- *  On-Line Applications Research Corporation (OAR).
- *  Copyright assigned to U.S. Government, 1994.
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.OARcorp.com/rtems/license.html.
- *
- *  $Id$
- */
-
-#include <rtems.h>
-#include <bsp.h>
-#include <shm.h>
-
-/*
- *  Shm_Initialize_lock
- *
- *  Initialize the lock for the specified locked queue.
- */
-
-void Shm_Initialize_lock(
-  Shm_Locked_queue_Control *lq_cb
-)
-{
-  lq_cb->lock = LQ_UNLOCKED;
-}
-
-/*  void _Shm_Lock( &lq_cb )
- *
- *  This shared memory locked queue support routine locks the
- *  specified locked queue.  It disables interrupts to prevent
- *  a deadlock condition.
- */
-
-void Shm_Lock(
-  Shm_Locked_queue_Control *lq_cb
-)
-{
-  rtems_unsigned32 isr_level;
-  rtems_unsigned32 *lockptr = (rtems_unsigned32 *) &lq_cb->lock;
-  rtems_unsigned32 lock_value;
-
-  lock_value = 0x80000000;
-  rtems_interrupt_disable( isr_level );
-
-    Shm_isrstat = isr_level;
-    while ( lock_value ) {
-      asm volatile( ""
-                         : "=r" (lockptr), "=r" (lock_value)
-                         : "0" (lockptr),  "1" (lock_value)
-                  );
-      /*
-       *  If not available, then may want to delay to reduce load on lock.
-       */
-
-      if ( lock_value )
-        delay( 10 );   /* approximately 10 microseconds */
-   }
-}
-
-/*
- *  Shm_Unlock
- *
- *  Unlock the lock for the specified locked queue.
- */
-
-void Shm_Unlock(
-  Shm_Locked_queue_Control *lq_cb
-)
-{
-  rtems_unsigned32 isr_level;
-
-  lq_cb->lock = SHM_UNLOCK_VALUE;
-  isr_level = Shm_isrstat;
-  rtems_interrupt_enable( isr_level );
-}
-
diff --git a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/mpisr.c b/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/mpisr.c
deleted file mode 100644
index 1911d89d67..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme2307/shmsupp/mpisr.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*  Shm_isr_nobsp()
- *
- *  COPYRIGHT (c) 1989-1998.
- *  On-Line Applications Research Corporation (OAR).
- *  Copyright assigned to U.S. Government, 1994.
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.OARcorp.com/rtems/license.html.
- *
- *  $Id$
- */
-
-#include <rtems.h>
-#include <bsp.h>
-#include <shm.h>
-
-rtems_isr Shm_isr_nobsp( void )
-{
-  /*
-   *  If this routine has to do anything other than the mpisr.c
-   *  found in the generic driver, then copy the contents of the generic
-   *  mpisr.c and augment it to satisfy this particular board.  Typically,
-   *  you need to have a board specific mpisr.c when the interrupt
-   *  must be cleared.
-   *
-   *  If the generic mpisr.c satisifies your requirements, then
-   *  remove this routine from your target's shmsupp/mpisb.c file.
-   *  Then simply install the generic Shm_isr in the Shm_setvec
-   *  routine below.
-   */
-}
-
-/*  Shm_setvec
- *
- *  This driver routine sets the SHM interrupt vector to point to the
- *  driver's SHM interrupt service routine.
- *
- *  Input parameters:  NONE
- *
- *  Output parameters: NONE
- */
-
-void Shm_setvec( void )
-{
-  /* XXX: FIX ME!!! */
-}