LEON: updated and added PCI peripherals for LEON BSPs

The CCHIP driver is replaced with the GR_701 driver. The
RASTA driver is replaced by the GR-RASTA-IO driver.

All drivers are now compatible with both LEON2 and LEON3,
drivers were initialized directly by the PCI-board drivers
are now initialized by the driver manager and therefore
does not require the double code created by including for
example grcan.c into grcan_rasta.c. The other drivers needs
to be updated to the driver manager framework however.

Added support for:
 * GR-701 (only LEON2 before)
 * GR-RASTA-IO (only LEON2 before)
 * GR-RASTA-ADCDAC
 * GR-RASTA-TMTC
 * GR-RASTA-SPW-ROUTER
 * GR-TMTC-1553

1 files changed, 0 insertions, 132 deletions

diff --git a/c/src/lib/libbsp/sparc/leon2/include/rasta.h b/c/src/lib/libbsp/sparc/leon2/include/rasta.h
deleted file mode 100644
index b7eccb4ecb..0000000000
--- a/c/src/lib/libbsp/sparc/leon2/include/rasta.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/**
- * @defgroup leon2_rasta Rasta Handler
- * @ingroup sparc_leon2
- *
- * @file
- * @ingroup leon2_rasta
- * @brief Handles Rasta
- */
-
-/*
- * COPYRIGHT (c) 2007.
- * Aeroflex Gaisler AB.
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- *
- */
-
-#ifndef __RASTA_H__
-#define __RASTA_H__
-
-#include <bsp.h>
-
-#include <grcan.h>
-#include <b1553brm_rasta.h>
-#include <grspw.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern int rasta_register(void);
-
-/* Address of PCI bus on RASTA local AMBA bus */
-#define RASTA_PCI_BASE             0xe0000000
-
-/* Address of SRAM on RASTA local AMBA bus */
-#define RASTA_LOCAL_SRAM           0x40000000
-
-#define UART0_IRQNO  2
-#define UART1_IRQNO  3
-#define GRCAN_IRQNO  7
-#define SPW0_IRQNO   10
-#define SPW1_IRQNO   11
-#define SPW2_IRQNO   12
-#define BRM_IRQNO    13
-
-#define GRCAN_IRQ   (3<<GRCAN_IRQNO)
-#define SPW0_IRQ    (1<<SPW0_IRQNO)
-#define SPW1_IRQ    (1<<SPW1_IRQNO)
-#define SPW2_IRQ    (1<<SPW2_IRQNO)
-#define SPW_IRQ     (7<<SPW0_IRQNO)
-#define BRM_IRQ     (1<<BRM_IRQNO)
-#define UART0_IRQ   (1<<UART0_IRQNO)
-#define UART1_IRQ   (1<<UART1_IRQNO)
-
-/*
- *  The following defines the bits in the UART Control Registers.
- *
- */
-#define LEON_REG_UART_CONTROL_RTD  0x000000FF /* RX/TX data */
-
-/*
- *  The following defines the bits in the LEON UART Status Registers.
- */
-#define LEON_REG_UART_STATUS_DR   0x00000001 /* Data Ready */
-#define LEON_REG_UART_STATUS_TSE  0x00000002 /* TX Send Register Empty */
-#define LEON_REG_UART_STATUS_THE  0x00000004 /* TX Hold Register Empty */
-#define LEON_REG_UART_STATUS_BR   0x00000008 /* Break Error */
-#define LEON_REG_UART_STATUS_OE   0x00000010 /* RX Overrun Error */
-#define LEON_REG_UART_STATUS_PE   0x00000020 /* RX Parity Error */
-#define LEON_REG_UART_STATUS_FE   0x00000040 /* RX Framing Error */
-#define LEON_REG_UART_STATUS_ERR  0x00000078 /* Error Mask */
-
-
-/*
- *  The following defines the bits in the LEON UART Status Registers.
- */
-#define LEON_REG_UART_CTRL_RE     0x00000001 /* Receiver enable */
-#define LEON_REG_UART_CTRL_TE     0x00000002 /* Transmitter enable */
-#define LEON_REG_UART_CTRL_RI     0x00000004 /* Receiver interrupt enable */
-#define LEON_REG_UART_CTRL_TI     0x00000008 /* Transmitter interrupt enable */
-#define LEON_REG_UART_CTRL_PS     0x00000010 /* Parity select */
-#define LEON_REG_UART_CTRL_PE     0x00000020 /* Parity enable */
-#define LEON_REG_UART_CTRL_FL     0x00000040 /* Flow control enable */
-#define LEON_REG_UART_CTRL_LB     0x00000080 /* Loop Back enable */
-
-#define UART_SET_SCALER 0
-#define UART_SET_CTRL   1
-#define UART_GET_STAT   2
-#define UART_CLR_STAT   3
-
-struct uart_reg {
-    volatile unsigned int data;              /* 0x00 */
-    volatile unsigned int status;            /* 0x04 */
-    volatile unsigned int ctrl;              /* 0x08 */
-    volatile unsigned int scaler;            /* 0x0C */
-};
-
-
-void uart_register(unsigned int baseaddr);
-rtems_device_driver uart_initialize(rtems_device_major_number major,
-    rtems_device_minor_number  minor, void *arg);
-rtems_device_driver uart_open(rtems_device_major_number major,
-    rtems_device_minor_number minor, void *arg);
-rtems_device_driver uart_close(rtems_device_major_number major,
-    rtems_device_minor_number minor, void *arg);
-rtems_device_driver uart_read(rtems_device_major_number major,
-    rtems_device_minor_number minor, void *arg);
-rtems_device_driver uart_write(rtems_device_major_number major,
-    rtems_device_minor_number minor, void *arg);
-rtems_device_driver uart_control(rtems_device_major_number major,
-    rtems_device_minor_number minor, void *arg);
-
-
-struct gpio_reg {
-    volatile unsigned int in_data;          /* 0x00 */
-    volatile unsigned int out_data;         /* 0x04 */
-    volatile unsigned int dir;              /* 0x08 */
-    volatile unsigned int imask;            /* 0x0C */
-    volatile unsigned int ipol;             /* 0x10 */
-    volatile unsigned int iedge;            /* 0x14 */
-};
-
-extern struct gpio_reg *gpio0, *gpio1;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif