2008-09-15 Joel Sherrill <joel.sherrill@oarcorp.com>

	* Makefile.am, configure.ac, include/bsp.h, startup/hw_init.c,
	startup/linkcmds, startup/linkcmds-le, startup/linkcmds-le.coff: Use
	shared bsp_get_work_area() in its own file and rely on BSP Framework
	to perform more initialization. After factoring this out, it turned
	out that all SuperH BSPs has the same bsp_start() implementation so
	this was made shared.
	* startup/bspstart.c: Removed.

1 files changed, 0 insertions, 118 deletions

diff --git a/c/src/lib/libbsp/sh/simsh4/startup/bspstart.c b/c/src/lib/libbsp/sh/simsh4/startup/bspstart.c
deleted file mode 100644
index 2c0febb232..0000000000
--- a/c/src/lib/libbsp/sh/simsh4/startup/bspstart.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- *  This routine starts the application.  It includes application,
- *  board, and monitor specific initialization and configuration.
- *  The generic CPU dependent initialization has been performed
- *  before this routine is invoked.
- *
- *  Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and
- *           Bernd Becker (becker@faw.uni-ulm.de)
- *
- *  COPYRIGHT (c) 1997-1998, FAW Ulm, Germany
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- *  COPYRIGHT (c) 1989-2008.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <bsp.h>
-#include <rtems/libio.h>
-
-#include <rtems/libcsupport.h>
-
-#include <string.h>
-
-/*
- *  Driver configuration parameters
- */
-uint32_t bsp_clicks_per_second;
-
-extern void bsp_hw_init(void);
-
-/*
- *  Use the shared implementations of the following routines
- */
-
-void bsp_libc_init( void *, uint32_t, int );
-
-/*
- *  Function:   bsp_pretasking_hook
- *
- *  Description:
- *      BSP pretasking hook.  Called just before drivers are initialized.
- *      Used to setup libc and install any BSP extensions.
- *
- *  NOTES:
- *      Must not use libc (to do io) from here, since drivers are
- *      not yet initialized.
- *
- */
-
-void bsp_pretasking_hook(void)
-{
-    bsp_libc_init(&HeapStart, (char *)&HeapEnd - (char *)&HeapStart, 0);
-}
-
-/*
- *  bsp_start
- *
- *  This routine does the bulk of the system initialization.
- */
-
-void bsp_start(void)
-{
-  /*
-     For real boards you need to setup the hardware
-     and need to copy the vector table from rom to ram.
-
-     Depending on the board this can ether be done from inside the rom
-     startup code, rtems startup code or here.
-   */
-
-#ifndef START_HW_INIT
-  /* board hardware setup here, or from 'start.S' */
-  bsp_hw_init();
-#endif
-
-  /*
-   *  Allocate the memory for the RTEMS Work Space.  This can come from
-   *  a variety of places: hard coded address, malloc'ed from outside
-   *  RTEMS world (e.g. simulator or primitive memory manager), or (as
-   *  typically done by stock BSPs) by subtracting the required amount
-   *  of work space from the last physical address on the CPU board.
-   */
-
-  /*
-   *  Need to "allocate" the memory for the RTEMS Workspace and
-   *  tell the RTEMS configuration where it is.  This memory is
-   *  not malloc'ed.  It is just "pulled from the air".
-   */
-
-  Configuration.work_space_start = (void *) &WorkSpaceStart ;
-  rtems_configuration_get_work_space_size()  =
-    (uint32_t) &WorkSpaceEnd -
-    (uint32_t) &WorkSpaceStart ;
-
-  /*
-   *  initialize the CPU table for this BSP
-   */
-
-#if ( CPU_ALLOCATE_INTERRUPT_STACK == FALSE )
-  _CPU_Interrupt_stack_low = &CPU_Interrupt_stack_low ;
-  _CPU_Interrupt_stack_high = &CPU_Interrupt_stack_high ;
-#endif
-
-  /*
-   *  initialize the device driver parameters
-   */
-  bsp_clicks_per_second = CPU_CLOCK_RATE_HZ;
-}