Whitespace removal.

1 files changed, 17 insertions, 17 deletions

diff --git a/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac b/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac
index b78ffaf15a..d989356eb6 100644
--- a/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac
+++ b/c/src/lib/libbsp/powerpc/tqm8xx/configure.ac
@@ -1,5 +1,5 @@
 ## Process this file with autoconf to produce a configure script.
-## 
+##
 ## $Id$
 
 AC_PREREQ(2.60)
@@ -36,8 +36,8 @@ RTEMS_BSPOPTS_HELP([INSTRUCTION_CACHE_ENABLE],
 
 RTEMS_BSPOPTS_SET([CONSOLE_CHN],[*],[CONS_CHN_SMC1])
 RTEMS_BSPOPTS_HELP([CONSOLE_CHN],
-[(BSP--console driver) Must be defined to be one of CONS_CHN_SMC1, 
- CONS_CHN_SMC2, CONS_CHN_SCC1, CONS_CHN_SCC2, CONS_CHN_SCC3, or CONS_CHN_SCC4. 
+[(BSP--console driver) Must be defined to be one of CONS_CHN_SMC1,
+ CONS_CHN_SMC2, CONS_CHN_SCC1, CONS_CHN_SCC2, CONS_CHN_SCC3, or CONS_CHN_SCC4.
  Determines which device will be registered as /dev/console.])
 
 RTEMS_BSPOPTS_SET([PRINTK_CHN],[*],[CONS_CHN_SMC1])
@@ -46,7 +46,7 @@ RTEMS_BSPOPTS_HELP([PRINTK_CHN],
  Must be defined to be one of CONS_CHN_SMC1, CONS_CHN_SMC2, CONS_CHN_SCC2,
  CONS_CHN_SCC3, or CONS_CHN_SCC4. Determines which device is used for output
  by printk(). If the port that printk() uses is also used for other
- I/O (e.g. if  PRINTK_CHN == CONSOLE_CHN), then both ports should 
+ I/O (e.g. if  PRINTK_CHN == CONSOLE_CHN), then both ports should
  use the same type of I/O, otherwise the drivers will likely conflict with
  each other.])
 
@@ -54,39 +54,39 @@ RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[tqm8xx_stk8xx],[CONS_MODE_POLLED])
 RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[pghplus],[CONS_MODE_POLLED])
 RTEMS_BSPOPTS_SET([CONS_SMC1_MODE],[*],[CONS_MODE_UNUSED])
 RTEMS_BSPOPTS_HELP([CONS_SMC1_MODE],
-[(BSP--SMC1 UART IF mode) Must be defined if SMC1 is used as a tty (UART) 
- channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for 
+[(BSP--SMC1 UART IF mode) Must be defined if SMC1 is used as a tty (UART)
+ channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for
  interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used])
 
 RTEMS_BSPOPTS_SET([CONS_SMC2_MODE],[tqm8xx_stk8xx],[CONS_MODE_POLLED])
 RTEMS_BSPOPTS_SET([CONS_SMC2_MODE],[*],[CONS_MODE_UNUSED])
 RTEMS_BSPOPTS_HELP([CONS_SMC2_MODE],
-[(BSP--SMC2 UART IF mode) Must be defined if SMC2 is used as a tty (UART) 
- channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for 
+[(BSP--SMC2 UART IF mode) Must be defined if SMC2 is used as a tty (UART)
+ channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for
  interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used])
 
 RTEMS_BSPOPTS_SET([CONS_SCC1_MODE],[*],[CONS_MODE_UNUSED])
 RTEMS_BSPOPTS_HELP([CONS_SCC1_MODE],
-[(BSP--SCC1 UART IF mode) Must be defined if SCC1 is used as a tty (UART) 
- channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for 
+[(BSP--SCC1 UART IF mode) Must be defined if SCC1 is used as a tty (UART)
+ channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for
  interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used])
 
 RTEMS_BSPOPTS_SET([CONS_SCC2_MODE],[*],[CONS_MODE_UNUSED])
 RTEMS_BSPOPTS_HELP([CONS_SCC2_MODE],
-[(BSP--SCC2 UART IF mode) Must be defined if SCC2 is used as a tty (UART) 
- channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for 
+[(BSP--SCC2 UART IF mode) Must be defined if SCC2 is used as a tty (UART)
+ channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for
  interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used])
 
 RTEMS_BSPOPTS_SET([CONS_SCC3_MODE],[*],[CONS_MODE_UNUSED])
 RTEMS_BSPOPTS_HELP([CONS_SCC3_MODE],
-[(BSP--SCC3 UART IF mode) Must be defined if SCC3 is used as a tty (UART) 
- channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for 
+[(BSP--SCC3 UART IF mode) Must be defined if SCC3 is used as a tty (UART)
+ channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for
  interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used])
 
 RTEMS_BSPOPTS_SET([CONS_SCC4_MODE],[*],[CONS_MODE_UNUSED])
 RTEMS_BSPOPTS_HELP([CONS_SCC4_MODE],
-[(BSP--SCC4 UART IF mode) Must be defined if SCC4 is used as a tty (UART) 
- channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for 
+[(BSP--SCC4 UART IF mode) Must be defined if SCC4 is used as a tty (UART)
+ channel. Set it to CONS_MODE_POLLED for polled operation, CONS_MODE_IRQ for
  interrupt driven (spooled) operation. Set it to CONS_MODE_UNUSED, if not used])
 
 # add selection of primary network interface
@@ -103,7 +103,7 @@ RTEMS_BSPOPTS_HELP([BSP_USE_NETWORK_SCC],
  for 10MBit networking.])
 
 
-# Explicitly list a Makefile here 
+# Explicitly list a Makefile here
 AC_CONFIG_FILES([Makefile])
 
 RTEMS_BSP_CLEANUP_OPTIONS(0, 0)