added new BSP for TQM8xx boards

1 files changed, 141 insertions, 0 deletions

diff --git a/c/src/lib/libbsp/powerpc/tqm8xx/README b/c/src/lib/libbsp/powerpc/tqm8xx/README
new file mode 100644
index 0000000000..261932c3c5
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/tqm8xx/README
@@ -0,0 +1,141 @@
+#
+#  $Id$
+#
+
+This is a README file for the tqm8xx BSP
+
+
+Summary
+-------
+
+BSP NAME:           tqm8xx
+BOARD:              various boards based on TQ Components TQM8xx modules
+BUS:                No backplane. 
+CPU FAMILY:         PowerPC
+CPU:                PowerPC MPC860 or MPC866
+COPROCESSORS:       Built-in Motorola QUICC
+MODE:               32 bit mode
+
+BOOT MONITOR:       TQMon 
+
+PERIPHERALS
+===========
+TIMERS:             PIT / Timebase
+  RESOLUTION:       1 microsecond / frequency = clock-speed / 16
+SERIAL PORTS:       1-4 SCCs, 1-2 SMC
+REAL-TIME CLOCK:    <none>
+DMA:                Each SCC and SMC.
+VIDEO:              <none>
+SCSI:               <none>
+NETWORKING:         Ethernet 10 Mbps on SCC1 and/or 
+                    10/100Mbps on FEC (for MPC866T)		    
+		   
+
+DRIVER INFORMATION
+==================
+CLOCK DRIVER:       yes
+CONSOLE DRIVER:     yes
+SHMSUPP:            N/A
+TIMER DRIVER:       yes
+NETWORK DRIVER:	    yes
+
+NOTES
+=====
+On-chip resources:
+	SCC1		network or serial port
+	SCC2		serial port
+	SCC3		serial port
+	SCC4		serial port
+	SMC1		serial port
+	SMC2		serial port
+	CLK1		network
+	CLK2		network
+	CLK3
+	CLK4
+	CLK5
+	CLK6
+	CLK7
+	CLK8
+	BRG1		console
+	BRG2		console
+	BRG3		console
+	BRG4		console
+	RTC
+	PIT		clock
+	TB
+	DEC
+	SWT	
+	UPMA
+	UPMB
+	IRQ0
+	IRQ1
+	IRQ2		
+	IRQ3		
+	IRQ4		
+	IRQ5	
+	IRQ6
+	IRQ7
+	IRQ_LVL0	
+	IRQ_LVL1
+	IRQ_LVL2
+	IRQ_LVL3
+	IRQ_LVL4
+	IRQ_LVL5
+	IRQ_LVL6
+	IRQ_LVL7
+	
+
+Board description
+-----------------
+Clock rate:     50MHz - 133MHz.
+Bus width:      32 bit Flash, 32 bit DRAM
+FLASH:	        2-8MB
+RAM:            32-256MB SDRAM
+
+
+Installation
+------------
+<tbd>
+
+
+Port Description
+Console driver
+---------------
+
+This BSP contains a console driver for polled and interrupt-driven
+operation. It supports SCCs and SMCs.
+During BSP configuration, various variables can be set to activate a
+certain channels and to specify the console channel:
+
+CONS_SMC1_MODE, CONS_SMC2_MODE, CONS_SCC[1-4]_MODE can be set to
+CONS_MODE_UNUSED, CONS_MODE_POLLED or CONS_MODE_IRQ
+
+The driver always uses termios. 
+
+printk() and debug output
+-----------------------
+<tbd>
+
+Floating-point
+--------------
+
+The MPC8xx do not have floating-point units. All code should
+get compiled with the appropriate -mcpu flag. The nof variants of the gcc
+runtime libraries should be used for linking.
+
+
+
+Miscellaneous
+-------------
+
+All development was based on the mbx8xx and gen68360 port.
+
+Test Configuration
+------------------
+
+Board:                pghplus (
+CPU:                  Motorola MPC866T
+Clock Speed:          133MHz
+RAM:                  64MByte
+Cache Configuration:  Instruction cache on; data cache on, copyback mode.
+