bsps: Move VME support to bsps

The VME support is only used by powerpc BSPs.

This patch is a part of the BSP source reorganization.

Update #3285.

1 files changed, 0 insertions, 142 deletions

diff --git a/c/src/lib/libbsp/powerpc/shared/vme/vmeconfig.c b/c/src/lib/libbsp/powerpc/shared/vme/vmeconfig.c
deleted file mode 100644
index c128d75f3c..0000000000
--- a/c/src/lib/libbsp/powerpc/shared/vme/vmeconfig.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* Default VME bridge configuration - note that this file
- * is independent of the bridge driver/chip
- */
-
-/*
- * Authorship
- * ----------
- * This software was created by
- *     Till Straumann <strauman@slac.stanford.edu>, 3/2002,
- * 	   Stanford Linear Accelerator Center, Stanford University.
- *
- * Acknowledgement of sponsorship
- * ------------------------------
- * This software was produced by
- *     the Stanford Linear Accelerator Center, Stanford University,
- * 	   under Contract DE-AC03-76SFO0515 with the Department of Energy.
- *
- * Government disclaimer of liability
- * ----------------------------------
- * Neither the United States nor the United States Department of Energy,
- * nor any of their employees, makes any warranty, express or implied, or
- * assumes any legal liability or responsibility for the accuracy,
- * completeness, or usefulness of any data, apparatus, product, or process
- * disclosed, or represents that its use would not infringe privately owned
- * rights.
- *
- * Stanford disclaimer of liability
- * --------------------------------
- * Stanford University makes no representations or warranties, express or
- * implied, nor assumes any liability for the use of this software.
- *
- * Stanford disclaimer of copyright
- * --------------------------------
- * Stanford University, owner of the copyright, hereby disclaims its
- * copyright and all other rights in this software.  Hence, anyone may
- * freely use it for any purpose without restriction.
- *
- * Maintenance of notices
- * ----------------------
- * In the interest of clarity regarding the origin and status of this
- * SLAC software, this and all the preceding Stanford University notices
- * are to remain affixed to any copy or derivative of this software made
- * or distributed by the recipient and are to be affixed to any copy of
- * software made or distributed by the recipient that contains a copy or
- * derivative of this software.
- *
- * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
- */
-
-#include <bsp.h>
-#include <bsp/VME.h>
-#include <bsp/VMEConfig.h>
-#ifdef BSP_VME_BAT_IDX
-#include <libcpu/bat.h>
-#endif
-#include <rtems/bspIo.h>
-
-extern int BSP_VMEInit(void);
-extern int BSP_VMEIrqMgrInstall(void);
-
-/* Use a weak alias for the VME configuration.
- * This permits individual applications to override
- * this routine.
- * They may even create an 'empty'
- *
- *    void BSP_vme_config(void) {}
- *
- * which will avoid linking in the Universe driver
- * at all :-).
- */
-
-void __BSP_default_vme_config(void);
-void BSP_vme_config(void)
-  __attribute__ (( weak, alias("__BSP_default_vme_config") ));
-
-void
-__BSP_default_vme_config(void)
-{
-
-  if ( BSP_VMEInit() ) {
-	printk("Skipping VME initialization...\n");
-	return;
-  }
-
-#ifdef BSP_VME_BAT_IDX
-  /* setup a PCI area to map the VME bus */
-  setdbat(BSP_VME_BAT_IDX,
-		  PCI_MEM_BASE + _VME_A32_WIN0_ON_PCI,
-		  PCI_MEM_BASE + _VME_A32_WIN0_ON_PCI,
-		  0x10000000,
-		  IO_PAGE);
-#endif
-
-  /* map VME address ranges */
-  BSP_VMEOutboundPortCfg(
-	0,
-	VME_AM_EXT_SUP_DATA,
-	_VME_A32_WIN0_ON_VME,
-	_VME_A32_WIN0_ON_PCI,
-	0x0e000000);
-  BSP_VMEOutboundPortCfg(
-	1,
-	VME_AM_STD_SUP_DATA,
-	0x00000000,
-	_VME_A24_ON_PCI,
-	0x00ff0000);
-  BSP_VMEOutboundPortCfg(
-	2,
-	VME_AM_SUP_SHORT_IO,
-	0x00000000,
-	_VME_A16_ON_PCI,
-	0x00010000);
-
-#ifdef _VME_CSR_ON_PCI
-  /* Map VME64 CSR */
-  BSP_VMEOutboundPortCfg(
-		  7,
-		  VME_AM_CSR,
-		  0,
-		  _VME_CSR_ON_PCI,
-		  0x01000000);
-#endif
-
-
-#ifdef _VME_DRAM_OFFSET
-  /* map our memory to VME giving the driver a hint that it's ordinary memory
-   * so they can enable decoupled cycles which should give better performance...
-   */
-  BSP_VMEInboundPortCfg(
-	0,
-	VME_AM_EXT_SUP_DATA | VME_AM_IS_MEMORY,
-	_VME_DRAM_OFFSET,
-	PCI_DRAM_OFFSET,
-	BSP_mem_size);
-#endif
-
-  /* stdio is not yet initialized; the driver will revert to printk */
-  BSP_VMEOutboundPortsShow(0);
-  BSP_VMEInboundPortsShow(0);
-
-  BSP_VMEIrqMgrInstall();
-}