2010-12-30 Sebastian Huber <sebastian.huber@embedded-brains.de>

	* shared/uboot_dump_bdinfo.c: Include <bsp/u-boot.h> if necessary.
	* shared/include/u-boot-board-info.h: New file.
	* shared/include/u-boot.h: Removed file.

1 files changed, 19 insertions, 15 deletions

diff --git a/c/src/lib/libbsp/powerpc/shared/include/u-boot.h b/c/src/lib/libbsp/powerpc/shared/include/u-boot-board-info.h
index 786ba030ea..b377705687 100644
--- a/c/src/lib/libbsp/powerpc/shared/include/u-boot.h
+++ b/c/src/lib/libbsp/powerpc/shared/include/u-boot-board-info.h
@@ -38,7 +38,7 @@
 
 typedef struct bd_info {
 	unsigned long	bi_memstart;	/* start of DRAM memory */
-	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
+	phys_size_t	bi_memsize;	/* size	 of DRAM memory in bytes */
 	unsigned long	bi_flashstart;	/* start of FLASH memory */
 	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
 	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
@@ -51,7 +51,7 @@ typedef struct bd_info {
 #if defined(CONFIG_MPC5xxx)
 	unsigned long	bi_mbar_base;	/* base of internal registers */
 #endif
-#if defined(CONFIG_MPC83XX)
+#if defined(CONFIG_MPC83xx)
 	unsigned long	bi_immrbar;
 #endif
 #if defined(CONFIG_MPC8220)
@@ -62,9 +62,9 @@ typedef struct bd_info {
 	unsigned long   bi_flbfreq;     /* Flexbus Freq, in MHz */
 	unsigned long   bi_vcofreq;     /* VCO Freq, in MHz */
 #endif
-	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
+	unsigned long	bi_bootflags;	/* boot / reboot flag (Unused) */
 	unsigned long	bi_ip_addr;	/* IP Address */
-	unsigned char	bi_enetaddr[6];	/* Ethernet adress */
+	unsigned char	bi_enetaddr[6];	/* OLD: see README.enetaddr */
 	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
 	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
 	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
@@ -101,15 +101,19 @@ typedef struct bd_info {
 #endif
 
 #ifdef CONFIG_HAS_ETH1
-	/* second onboard ethernet port */
-	unsigned char   bi_enet1addr[6];
+	unsigned char   bi_enet1addr[6];	/* OLD: see README.enetaddr */
 #endif
 #ifdef CONFIG_HAS_ETH2
-	/* third onboard ethernet port */
-	unsigned char	bi_enet2addr[6];
+	unsigned char	bi_enet2addr[6];	/* OLD: see README.enetaddr */
 #endif
 #ifdef CONFIG_HAS_ETH3
-	unsigned char   bi_enet3addr[6];
+	unsigned char   bi_enet3addr[6];	/* OLD: see README.enetaddr */
+#endif
+#ifdef CONFIG_HAS_ETH4
+	unsigned char   bi_enet4addr[6];	/* OLD: see README.enetaddr */
+#endif
+#ifdef CONFIG_HAS_ETH5
+	unsigned char   bi_enet5addr[6];	/* OLD: see README.enetaddr */
 #endif
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
@@ -126,14 +130,14 @@ typedef struct bd_info {
 #if defined(CONFIG_4xx)
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
-	int 		bi_phynum[4];           /* Determines phy mapping */
-	int 		bi_phymode[4];          /* Determines phy mode */
+	int		bi_phynum[4];           /* Determines phy mapping */
+	int		bi_phymode[4];          /* Determines phy mode */
 #elif defined(CONFIG_405EP) || defined(CONFIG_440)
-	int 		bi_phynum[2];           /* Determines phy mapping */
-	int 		bi_phymode[2];          /* Determines phy mode */
+	int		bi_phynum[2];           /* Determines phy mapping */
+	int		bi_phymode[2];          /* Determines phy mode */
 #else
-	int 		bi_phynum[1];           /* Determines phy mapping */
-	int 		bi_phymode[1];          /* Determines phy mode */
+	int		bi_phynum[1];           /* Determines phy mapping */
+	int		bi_phymode[1];          /* Determines phy mode */
 #endif
 #endif /* defined(CONFIG_4xx) */
 } bd_t;