bsp/qoriq: Remove legacy U-Boot support

1 files changed, 2 insertions, 38 deletions

diff --git a/c/src/lib/libbsp/powerpc/qoriq/configure.ac b/c/src/lib/libbsp/powerpc/qoriq/configure.ac
index 9e63763b9e..1445a55bbd 100644
--- a/c/src/lib/libbsp/powerpc/qoriq/configure.ac
+++ b/c/src/lib/libbsp/powerpc/qoriq/configure.ac
@@ -52,45 +52,12 @@ RTEMS_BSPOPTS_HELP([BSP_CONSOLE_BAUD],[default baud for console and other serial
 RTEMS_BSPOPTS_SET([BSP_USE_UART_INTERRUPTS],[*],[1])
 RTEMS_BSPOPTS_HELP([BSP_USE_UART_INTERRUPTS],[enable usage of interrupts for the UART modules])
 
-RTEMS_BSPOPTS_SET([U_BOOT_USE_FDT],[qoriq_t*],[1])
-RTEMS_BSPOPTS_SET([U_BOOT_USE_FDT],[*],[])
-RTEMS_BSPOPTS_HELP([U_BOOT_USE_FDT],[enables U-Boot support using FDT])
-
-RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_SIZE_MAX],[qoriq_t*],[262144])
-RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_SIZE_MAX],[*],[])
+RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_SIZE_MAX],[*],[262144])
 RTEMS_BSPOPTS_HELP([BSP_FDT_BLOB_SIZE_MAX],[maximum size of the FDT blob in bytes])
 
-RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_READ_ONLY],[qoriq_t*],[1])
-RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_READ_ONLY],[*],[])
+RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_READ_ONLY],[*],[1])
 RTEMS_BSPOPTS_HELP([BSP_FDT_BLOB_READ_ONLY],[place the FDT blob into the read-only data area])
 
-RTEMS_BSPOPTS_SET([HAS_UBOOT],[qoriq_t*],[])
-RTEMS_BSPOPTS_SET([HAS_UBOOT],[*],[1])
-RTEMS_BSPOPTS_HELP([HAS_UBOOT],[enables legacy U-Boot support without FDT])
-
-RTEMS_BSPOPTS_SET([U_BOOT_64_BIT_PHYS_SIZE],[qoriq_t*],[1])
-RTEMS_BSPOPTS_SET([U_BOOT_64_BIT_PHYS_SIZE],[*],[])
-RTEMS_BSPOPTS_HELP([U_BOOT_64_BIT_PHYS_SIZE],[if defined, then use uint64_t for phys_size_t (only used by legacy U-Boot support)])
-
-RTEMS_BSPOPTS_SET([U_BOOT_GENERIC_BOARD_INFO],[qoriq_t*],[1])
-RTEMS_BSPOPTS_SET([U_BOOT_GENERIC_BOARD_INFO],[*],[])
-RTEMS_BSPOPTS_HELP([U_BOOT_GENERIC_BOARD_INFO],[if defined, then use the generic bd_t structure (only used by legacy U-Boot support)])
-
-RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_BEGIN],[qoriq_p2020*],[0x3fff0000])
-RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_BEGIN],[qoriq_t*],[])
-RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_BEGIN],[*],[0x1fff0000])
-RTEMS_BSPOPTS_HELP([U_BOOT_BOOT_PAGE_BEGIN],[the begin address of the boot page set up by U-Boot (only used by legacy U-Boot support)])
-
-RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_LAST],[qoriq_p2020*],[0x3fffffff])
-RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_LAST],[qoriq_t*],[])
-RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_LAST],[*],[0x1fffffff])
-RTEMS_BSPOPTS_HELP([U_BOOT_BOOT_PAGE_LAST],[the last address of the boot page set up by U-Boot (only used by legacy U-Boot support)])
-
-RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_SPIN_OFFSET],[qoriq_p2020*],[0xf240])
-RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_SPIN_OFFSET],[qoriq_t*],[])
-RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_SPIN_OFFSET],[*],[0xf2a0])
-RTEMS_BSPOPTS_HELP([U_BOOT_BOOT_PAGE_SPIN_OFFSET],[the offset to the spin table in the boot page set up by U-Boot (only used by legacy U-Boot support)])
-
 RTEMS_BSPOPTS_SET([QORIQ_CPU_COUNT],[qoriq_t*],[24])
 RTEMS_BSPOPTS_SET([QORIQ_CPU_COUNT],[*],[2])
 RTEMS_BSPOPTS_HELP([QORIQ_CPU_COUNT],[maximum virtual processor count])
@@ -133,9 +100,6 @@ RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_1_ENABLE],[qoriq_core_1],[1])
 RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_1_ENABLE],[*],[0])
 RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_1_ENABLE],[use 1 to enable UART 1 to Intercom bridge, otherwise use 0])
 
-RTEMS_BSPOPTS_SET([BSP_DISABLE_UBOOT_WORK_AREA_CONFIG],[*],[1])
-RTEMS_BSPOPTS_HELP([BSP_DISABLE_UBOOT_WORK_AREA_CONFIG],[disable U-Boot work area configuration])
-
 RTEMS_BSPOPTS_SET([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[*],[1])
 RTEMS_BSPOPTS_HELP([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[indicate that the interrupt stack is at the work area begin])